Search NASA⌕ Search

SEARCH · Search NASA

Results for “IRON SILICATES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Approaching theoretical specific capacity of iron-rich lithium iron silicate using graphene-incorporation and fluorine-doping

Lithium iron silicate, Li 2 FeSiO 4 , is a promising cathode material for lithium ion batteries due to its high theoretical specific capacity, earth abundance, low cost, and environmental friendliness. The challenges of Li 2 FeSiO 4 as a practical cathode material are (1) the low electronic and ionic conductivity and (2) the low discharge voltage. The approach of incorporating graphene sheets into the nanostructure of Li 2 FeSiO 4 is used for dealing with the low conductivities while fluorine doping is intended to increase the discharge voltage. The fluorine-doped and graphene-incorporated iron-rich lithium iron silicate F-LFSO/G nanomaterials were successfully synthesized using a facile/efficient hydrothermal method with excellent performance, 328.43 mA h g -1 at 0.1C rate, approaching their theoretical specific capacity, 99% of 331 mA h g -1 . This clearly reveals that the reversible (de)lithiation of 2 Li + ions per F-LFSO has been realized as a result of these approaches. The (de)lithiation process has been studied using in operando high energy synchrotron X-ray absorption near edge spectroscopy and X-ray photoelectron spectroscopy aided by theoretical modeling, which reveals that F doping deeply changes the O electron configuration in F-LFSO, and consequently makes the Li + ion transfer easier, while the reversible redox of oxygen can be utilized to achieve high specific capacity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A shock-induced phase change in iron-silicate garnet.

Hugoniot measurements on iron-silicate garnet demonstrate that above a shock pressure of about 205 kbar transition to a high-pressure phase(s), having an apparent zero-pressure density and bulk modulus of 4.44 g/cu cm and 3.3 Mbar, occurs. Crystal chemical systematics and Debye-Scherrer X-ray patterns of a recovered phase(s), which may be the shock-induced high-pressure form, suggest possible formation of a phase with a density of 4.48/cu cm. Occurrence of such a polymorph of garnet in the mantle would give rise to an increase in density and seismic velocity below 600 km in the earth.

Ahrens, T. J.↗

Distributions of Ag, Bi, and Sb as Minor Elements between Iron-Silicate Slag and Copper in Equilibrium with Tridymite in the Cu-Fe-O-Si System at T = 1250 °C and 1300 °C (1523 K and 1573 K)

New experimental data on the distributions of silver (Ag), bismuth (Bi), and antimony (Sb) between liquid iron-silicate slag and liquid copper metal in equilibrium with tridymite in the Cu-Fe-O-Si system at T = 1250 °C and 1300 °C (1523 K and 1573 K) have been obtained. The experimental methodology involved high-temperature equilibration, rapid quenching of the equilibrated phases, followed by direct measurement of the equilibrium phases with electron probe X-ray microanalysis (EPMA) for measurement of major element concentrations and laser ablation inductively coupled plasma mass spectrometry (LAICPMS) for the measurement of minor element concentrations. The 4-point test approach was employed to confirm the achievement of chemical equilibrium in the current study. Open-system equilibration on quartz substrates in controlled gas atmospheres (CO/CO{sub 2}/Ar) and closed-system equilibration in sealed quartz ampoules were used. The new experimental data resolve significant discrepancies found in previous studies and can be used as input for the development of thermodynamic databases for copper-making processes.

36 MATERIALS SCIENCE↗

OPTICAL PROPERTIES OF IRON SILICATES IN THE INFRARED TO MILLIMETER AS A FUNCTION OF WAVELENGTH AND TEMPERATURE

The Optical Properties of Astronomical Silicates with Infrared Techniques program utilizes multiple instruments to provide spectral data over a wide range of temperatures and wavelengths. Experimental methods include Vector Network Analyzer and Fourier transform spectroscopy transmission, and reflection/scattering measurements. From this data, we can determine the optical parameters for the index of refraction, n, and the absorption coefficient, k. The analysis of the laboratory transmittance data for each sample type is based upon different mathematical models, which are applied to each data set according to their degree of coherence. Presented here are results from iron silicate dust grain analogs, in several sample preparations and at temperatures ranging from 5 to 300 K, across the infrared and millimeter portion of the spectrum (from 2.5 to 10,000 {mu}m or 4000 to 1 cm{sup -1}).

79 ASTRONOMY AND ASTROPHYSICS↗

Optical Properties of Iron Silicates in the Infrared to Millimeter as a Function of Wavelength and Temperature

The Optical Properties of Astronomical Silicates with Infrared Techniques (OPASI-T) program utilizes multiple instruments to provide spectral data over a wide range of temperature and wavelengths. Experimental methods include Vector Network Analyzer (VNA) and Fourier Transform Spectroscopy (FTS) transmission, and reflection/scattering measurements. From this data, we can determine the optical parameters for the index of refraction, n, and the absorption coefficient, k. The analysis of the laboratory transmittance data for each sample type is based upon different mathematical models, which are applied to each data set according to their degree of coherence. Presented here are results from iron silicate dust grain analogs, in several sample preparations and at temperatures ranging from 5-300 K, across the infrared and millimeter portion of the spectrum (from 2.5-10,000 μm or 4,000-1 cm(exp −1).

Optical↗

Optical Properties of Iron Silicates in the Infrared to Millimeter as a Function of Wavelength and Temperature

The Optical Properties of Astronomical Silicates with Infrared Techniques program utilizes multiple instruments to provide spectral data over a wide range of temperatures and wavelengths. Experimental methods include Vector Network Analyzer and Fourier transform spectroscopy transmission, and reflection/scattering measurements. From this data, we can determine the optical parameters for the index of refraction, n, and the absorption coefficient, k. The analysis of the laboratory transmittance data for each sample type is based upon different mathematical models, which are applied to each data set according to their degree of coherence. Presented here are results from iron silicate dust grain analogs, in several sample preparations and at temperatures ranging from 5 to 300 K, across the infrared and millimeter portion of the spectrum (from 2.5 to 10,000/micron or 4000 to 1/cm).

Dust↗

Optical Properties of Iron Silicates in the Infrared to Millimeter as a Function of Wavelength and Temperature

The Optical Properties of Astronomical Silicates with Infrared Techniques (OPASI-T) program utilizes multiple instruments to provide spectral data over a wide range of temperature and wavelengths. Experimental methods include Vector Network Analyzer (VNA) and Fourier Transform Spectroscopy (FTS) transmission, and reflection/scattering measurements. From this data, we can determine the optical parameters for the index of refraction, n, and the absorption coefficient, k. The analysis of the laboratory transmittance data for each sample type is based upon different mathematical models, which are applied to each data set according to their degree of coherence. Presented here are results from iron silicate dust grain analogs, in several sample preparations and at temperatures ranging from 5-300 K, across the infrared and millimeter portion of the spectrum (from 2.5-10,000 m or 4,000-1 cm(exp−1).

Methods: laboratory↗

Thermodynamics of Liquid Immiscibility in Iron-Silicate Melt Systems: A Study of Nuclear Fallout Glass

In a ground-interacting nuclear explosion, elements derived from environmental and anthropogenic material, such as iron, silicon, and aluminum, can be incorporated into the fireball. When significant amounts of metals are entrained, the resulting melt may display immiscible textures. The composition of these textures is a record of the temperature of formation and cooling rates (or thermodynamic stability) of the melts and can provide unique constraints on the early cooling conditions of these events. Here, a thermodynamic approach using calculated phase diagrams, the CALPHAD method, is used to predict temperature and composition ranges where stable liquid immiscibility might result in the textures observed in nuclear fallout glass. Sensitivity of the immiscibility to the presence of relative Al, Ca, and Mg content is also explored and compared to fallout samples, and partition coefficients are introduced to understand the preferred distribution of components into each liquid phase.

36 MATERIALS SCIENCE↗

Equilibria bearing on the behavior of titanate phases during crystallization of iron silicate melts under strongly reducing conditions

Titanate phase relations at liquidus temperatures are determined for the CaAl2Si2O8-Fe2TiO4-FeTi2O5 system in contact with metallic iron by reflected- and transmitted-light microscopy, electron microprobe, and X-ray diffraction analyses. Results of critical equilibration runs are presented, various primary phase areas and liquidus isotherms are illustrated, and the geometry of the system is described. Three piercing points are determined, and it is noted that the compositional interrelations among coexisting crystalline and liquid phases as well as the sequence of the various titanate phases are indicative of the significant effects of the various cations on the relative stability of these phases. It is found that Al2O3 exerts a strong stabilizing effect on the phase assemblage of ulvospinel plus ferropseudobrookite relative to ilemite.

Lipin, B. R.↗

Local structural variation with oxygen fugacity in Fe 2 SiO 4+x fayalitic iron silicate melts

Here, the structure of molten Fe 2 SiO 4+x has been studied using both high-energy X-ray diffraction and Fe K-edge X-ray absorption near-edge structure (XANES) spectroscopy, combined with aerodynamic levitation and laser beam heating. A wide range of Fe 3+ contents were accessed by varying the levitation and atmospheric gas composition. Diffraction measurements were made in the temperature ( T ) and oxygen partial pressure ranges 1624(21) < T < 2183(94) K (uncertainties in parentheses) and –5.6(3) < ΔFMQ < +2.8(5) log units (relative to the Fayalite-Magnetite-Quartz buffer). Iron K-edge XANES measurements covered the ranges 1557(33) < T < 1994(36) K and –2.1(3) < ΔFMQ < +4.4(3) log units. Fe 3+ contents, x = Fe 3+ /ΣFe, estimated directly from the pre-edge peaks of the XANES spectra varied between 0.15(1) and 0.40(2). While these agree in some cases with semi-empirical models, notable discrepancies are discussed in the context of the redox kinetics and the limitations in both the models and in the calibrations used to derive oxidation state from XANES spectra. XANES pre-edge peak areas imply average Fe–O coordination numbers, n FeO , close to 5 for all Fe 3+ /ΣFe. Diffraction measurements yielded values of 4.4(2) < n FeO < 4.7(1). There is limited evidence for a linear trend n FeO (x) = 4.46(3) + 0.4(1)x. Asymmetric Fe–O bond length distributions peak at around 1.96 Å and have a shoulder arising from longer interatomic distances. Mean r FeO lie close to 2.06 Å, consistent with n FeO close to 5. These observations suggest that Fe 2+ is less efficient at stabilizing tetrahedral Fe 3+ compared to large monovalent alkali cations. Comparison of in-situ XANES estimates of Fe 3+ /ΣFe in the melts to those of the quenched solids obtained from XANES as well as Mössbauer spectroscopy indicate rapid oxidation during cooling, enabled by stirring of the melt by the levitation gas flow. As such, the oxidation state of hot komatiitic and other highly fluid melts may not be retained, even during rapid cooling, as it is for cooler basaltic and more silicic magmas.

58 GEOSCIENCES↗

Shock wave compression of iron-silicate garnet.

Shock wave compression data to over 650 kb are presented for single-crystal almandine garnet. The data indicate the initiation of a phase transformation near 200 kb. Total transition to the high-pressure polymorph occurs at approximately 300 kb. The elastic properties of the high-pressure phase are calculated from the metastable Hugoniot data by using the linear shock velocity-particle velocity relationships. The overall results obtained strongly suggest that upper mantle minerals are likely to occur in the ilmenite structure over a substantial part of the lower mantle.

Graham, E. K.↗

High-pressure X-ray diffraction and X-ray emission studies on iron-bearing silicate perovskite under high pressures

Iron-bearing silicate perovskite is believed to be the most abundant mineral of the Earth's lower mantle. Recent studies have shown that Fe{sup 2+} exists predominantly in the intermediate-spin state with a total spin number of 1 in silicate perovskite in the lower part of the lower mantle. Here we have measured the spin states of iron and the pressure-volume relation in silicate perovskite [(Mg{sub 0.6},Fe{sub 0.4})SiO{sub 3}] at pressure conditions relevant to the lowermost mantle using in situ X-ray emission and X-ray diffraction in a diamond cell. Our results showed that the intermediate-spin Fe{sup 2+} is stable in the silicate perovskite up to {approx} 125 GPa but starts to transition to the low-spin state at approximately 135 GPa. Concurrent X-ray diffraction measurements showed a decrease of approximately 1% in the unit cell volume in the silicate perovskite [(Mg{sub 0.6},Fe{sub 0.4})SiO{sub 3}], which is attributed to the intermediate-spin to the low-spin transition. The transition pressure coincides with the pressure conditions of the lowermost mantle, raising the possibility of the existence of the silicate perovskite phase with the low-spin Fe{sup 2+} across the transition from the post-perovskite to the perovskite phases in the bottom of the D{double_prime} layer.

36 MATERIALS SCIENCE↗