Search NASA⌕ Search

SEARCH · Search NASA

Results for “ISOMERS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Ligand and Linkage Isomers of Bis(ethylthiocarbamato) Copper Complexes with Cyclic C 6 H 8 Backbone Substituents: Synthesis, Characterization, and Antiproliferation Activity

Abstract A series of isomeric bis(alkylthiocarbamate) copper complexes have been synthesized, characterized, and evaluated for antiproliferation activity. The complexes were derived from ligand isomers with 3‐methylpentyl (H 2 L 2 ) and cyclohexyl (H 2 L 3 ) backbone substituents, which each yield a pair of linkage isomers. The thermodynamic products CuL 2a/3a have two imino N and two S donors resulting in three five‐member chelate rings (555 isomers). The kinetic isomers CuL 2b/3b have one imino and one hydrazino N donor and two S donors resulting in four‐, six‐, and five‐member rings (465 isomers). The 555 isomers have more accessible Cu II/I potentials (E 1/2 =−811/−768 mV vs. ferrocenium/ferrocene) and lower energy charge transfer bands than their 465 counterparts (E 1/2 =−923/‐854 mV). Antiproliferation activities were evaluated against the lung adenocarcinoma cell line (A549) and nonmalignant lung fibroblast cell line (IMR‐90) using the MTT assay. CuL 2a was potent ( A549 EC 50 =0.080 μM) and selective ( IMR‐90 EC 50 / A549 EC 50 =25) for A549. Its linkage isomer CuL 2b had equivalent A549 activity, but lower selectivity ( IMR‐90 EC 50 / A549 EC 50 =12.5). The isomers CuL 3a and CuL 3b were less potent with A549 EC 50 values of 1.9 and 0.19 M and less selective with IMR‐90 EC 50 / A549 EC 50 ratios of 2.3 and 2.65, respectively. There was no correlation between reduction potential and A549 antiproliferation activity/selectivity.

Chemistry↗
DOE OSTI2018

Topologically guided tuning of Zr-MOF pore structures for highly selective separation of C6 alkane isomers

Effective separation of alkane isomers is a critical step in the petroleum refining process to produce gasoline with high octane rating. Current technology relies on energy intensive distillation method. Adsorptive separation using porous solids offers an alternative route that is more cost effective, lower energy and higher efficiency. Guided by topology-directed design and synthesis, we have developed a series of zirconium-based metal-organic frameworks with optimized pore structure for efficient separation of C6 alkane isomers, Zr-bptc adsorbs a large amount of n-hexane while excluding branched isomers. The n-hexane uptake is ~70% higher than that of a benchmark adsorbent, zeolite-5A. A derivative structure, Zr-abtc, is capable of discriminating all three C6 isomers with a high separation factor for 3-methylpentane over 2,3-dimethylbutane. This property is important for producing gasoline with further improved quality.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Isomers and hindrances in No254: A touchstone for theories of superheavy nuclei

We report on a new spectroscopic study of the decay of high-K isomers in No152102254, a touchstone nucleus for testing models to understand the structure of superheavy nuclei. The experiment, performed using the Argonne gas-filled analyzer (AGFA), was geared toward resolving long-standing ambiguities in spin-parity and configuration assignments for the two- and four-quasiparticle (qp) intrinsic excitations identified in this nucleus. The isomer decay schemes are firmly established with the help of the highest-statistics γ-γ coincidence data collected to date, providing anchor points for competing theories. A newly measured half-life in the nanosecond range establishes a second 2-qp isomer in No254. The preferred decay pathways for the 2- and 4-qp isomers are discussed, providing new insights into the underlying hindrance mechanisms at play in these heavy nuclei. With firm configuration assignments, the intrinsic excitations in this deformed mass region provide stringent constraints and challenge the different theoretical approaches at play in understanding the structure of superheavy nuclei.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2022

Discrimination of xylene isomers in a stacked coordination polymer

The separation and purification of xylene isomers is an industrially important but challenging process. Developing highly efficient adsorbents is crucial for the implementation of simulated moving bed technology for industrial separation of these isomers. Herein, we report a stacked one-dimensional coordination polymer {[Mn(dhbq)(H 2 O) 2 ], H 2 dhbq = 2,5-dihydroxy-1,4-benzoquinone} that exhibits an ideal molecular recognition and sieving of xylene isomers. Its distinct temperature-adsorbate–dependent adsorption behavior enables full separation of p -, m -, and o -xylene isomers in both vapor and liquid phases. The delicate stimuli-responsive swelling of the structure imparts this porous material with exceptionally high flexibility and stability, well-balanced adsorption capacity, high selectivity, and fast kinetics at conditions mimicking industrial settings. This study may offer an alternative approach for energy-efficient and adsorption-based industrial xylene separation and purification processes.

Science & Technology - Other Topics↗
DOE OSTI2021

Theoretical Prediction and Interpretation of 237 Np Mössbauer Isomer Shifts

Different theoretical approaches for the calculation of 237 Np Mössbauer isomer shifts are investigated. The traditional contact density route is compared to a previously proposed alternative approach that uses energy derivatives with respect to the nuclear radius. Both approaches yield similar results as long as suitable basis sets augmented with large exponents and relativistic methods are used. Density functional theory (DFT) calculations do not show a strong dependency of the 237 Np isomer shift on the chosen functional. Wavefunction calculations show that dynamic electron correlation can be important when covalent bonding influences the isomer shift. Effects from spin–orbit coupling are small. The isomer shifts of ionic solids and Np(III) organometallic complexes are largely governed by the oxidation state of Np. Isomer shifts of organometallic Np(IV) complexes are strongly affected by donation bonding. Furthermore, detailed analysis of the wavefunction results with different active spaces demonstrates that correlation among the outer core Np and occupied ligand frontier orbitals contributes significantly to isomer shifts of Np(IV) compounds.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1971

Preferential polymerization and adsorption of L-optical isomers of amino acids relative to D-optical isomers on kaolinite templates.

Experiments on the polymerization of the L- and D-optical isomers of aspartic acid and serine using kaolinite as a catalyst showed that the L-optical isomers were polymerized at a much higher rate than the D-optical isomers; racemic (DL-) mixtures were polymerized at an intermediate rate. The peptides formed from the L-monomers were preferentially adsorbed by the clay. In the absence of kaolinite, no significant or consistent difference in the behavior of the L- and D-optical isomers was observed. In experiments on the adsorption of L- and D-phenylalanine by kaolinite, the L-optical isomer was preferentially adsorbed.

Jackson, T. A.↗
DOE OSTI2022

237 Np Mössbauer Isomer Shifts: A Lesson About the Balance of Static and Dynamic Electron Correlation in Heavy Element Complexes

A large set of neptunium compounds with different oxidation states (III to VII) was assembled to study the Mössbauer isomer shift by wave function calculations and better understand covalency in f-elements complexes. The contact density approach was used to calculate the isomer shift using complete active space self-consistent field (CASSCF) multiconfiguration wave functions, as well as matrix product states [from Density Matrix Renormalization Group (DMRG) algorithms] for large active spaces. Dynamic correlation effects for the isomer shifts were treated via CASPT2 energy derivatives with respect to the nuclear radius. The CASSCF calculations appear to produce different orbital overlocalization errors for low and high Np oxidation states. For compounds with low Np oxidation numbers, the errors can be attributed to the overlocalization of the 5f orbitals. For the compounds with high Np oxidation numbers, the main errors arise from an overlocalization of ligand orbitals and concomitant to weak donation bonding. Attempts to mitigate the overlocalization errors with large active spaces using DMRG were only partially successful, showing that explicit treatment of dynamic correlation is necessary for accurate predictions of Mössbauer isomer shifts. The CASPT2 calculations perform very satisfactorily. For a subset of Np compounds, both static and dynamic correlation effects were substantial. Furthermore, a rational active space selection based on orbital entanglement diagrams proved beneficial for determining the optimal reference wave function.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2015

High-spin yrast structure of Hg 204 from the decay of a four-hole, 22 + isomer

We present that a high-spin isomer with τ > 700 ns has been found in 204 Hg, populated in reactions of 1360-MeV 208 Pb and 330-MeV 48 Ca beams with a thick 238 U target and a 1450-MeV 208 Pb beam on a thick 208 Pb target. The observed γ-ray decay of the isomer has established the yrast states below it, including another isomer with τ = 33(3) ns. The experimental results are compared with shell-model calculations that include four holes in the configuration space between 132 Sn and 208 Pb. The available spectroscopic information, including transition strengths, total conversion, and angular correlation coefficients, together with the observed agreement with the calculations, allows spin, parity, and configuration assignments to be proposed for the experimental states. Finally, the τ > 700 ns isomer is the 22 + state of maximum spin available from the alignment of the four valence holes with the configuration πh$-2\atop{11/2}$vi$-2\atop{13/2}$.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2020

Splitting Mono- and Di-Branched Alkane Isomers by a Robust Aluminum-Based Metal-Organic Framework Material with Optimal Pore Dimensions

The separation of alkanes with different degrees of branching, particularly mono- and dibranched isomers, represents a challenging yet important industrial process for the production of premium gasoline blending components with high octane number. We report here the separation of linear/monobranched and dibranched alkanes through complete molecular sieving by a robust aluminum-based MOF material, Al-bttotb (H 3 bttotb = 4,4',4"-(benzene-1,3,5-triyltris(oxy))tribenzoicacid). Single- and multicomponent adsorption experiments reveal that the material adsorbs linear and monobranched alkanes, but fully excludes their dibranched isomers. Adsorption sites of alkanes within the MOF channels have been identified by single-crystal X-ray diffraction studies, and the adsorption mechanism was explored through computational calculations and modeling. The highly selective adsorption of the MOF should be attributed to its optimal pore dimensions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2018

Separation of Xylene Isomers through Multiple Metal Site Interactions in Metal–Organic Frameworks

Purification of the C 8 alkylaromatics o-xylene, m-xylene, p-xylene, and ethylbenzene remains among the most challenging industrial separations, due to the similar shapes, boiling points, and polarities of these molecules. We report the evaluation of the metal-organic frameworks Co 2 (dobdc) (dobdc 4- = 2,5-dioxido-1,4-benzenedicarboxylate) and Co 2 ( m-dobdc) ( m-dobdc 4- = 4,6-dioxido-1,3-benzenedicarboxylate) for the separation of xylene isomers using single-component adsorption isotherms and multicomponent breakthrough measurements. Remarkably, Co 2 (dobdc) distinguishes among all four molecules, with binding affinities that follow the trend o-xylene > ethylbenzene > m-xylene > p-xylene. Multicomponent liquid-phase adsorption measurements further demonstrate that Co 2 (dobdc) maintains this selectivity over a wide range of concentrations. Structural characterization by single-crystal X-ray diffraction reveals that both frameworks facilitate the separation through the extent of interaction between each C 8 guest molecule with two adjacent cobalt(II) centers, as well as the ability of each isomer to pack within the framework pores. Moreover, counter to the presumed rigidity of the M 2 (dobdc) structure, Co 2 (dobdc) exhibits an unexpected structural distortion in the presence of either o-xylene or ethylbenzene that enables the accommodation of additional guest molecules.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2018

Isomer depletion as experimental evidence of nuclear excitation by electron capture

The atomic nucleus and its electrons are often thought of as independent systems that are held together in the atom by their mutual attraction. Their interaction, however, leads to other important effects, such as providing an additional decay mode for excited nuclear states, whereby the nucleus releases energy by ejecting an atomic electron instead of by emitting a γ-ray. This ‘internal conversion’ has been known for about a hundred years and can be used to study nuclei and their interaction with their electrons. In the inverse process—nuclear excitation by electron capture (NEEC)—a free electron is captured into an atomic vacancy and can excite the nucleus to a higher-energy state, provided that the kinetic energy of the free electron plus the magnitude of its binding energy once captured matches the nuclear energy difference between the two states. NEEC was predicted in 1976 and has not hitherto been observed. Here we report evidence of NEEC in molybdenum-93 and determine the probability and cross-section for the process in a beam-based experimental scenario. Our results provide a standard for the assessment of theoretical models relevant to NEEC, which predict cross-sections that span many orders of magnitude. The greatest practical effect of the NEEC process may be on the survival of nuclei in stellar environments, in which it could excite isomers (that is, long-lived nuclear states) to shorter-lived states. Such excitations may reduce the abundance of the isotope after its production. This is an example of ‘isomer depletion’, which has been investigated previously through other reactions but is used here to obtain evidence for NEEC.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2016

Long-lived K isomer and enhanced γ vibration in the neutron-rich nucleus 172 Dy: Collectivity beyond double midshell

The level structure of 172Dy has been investigated for the first time by means of decay spectroscopy following in-flight fission of a 238U beam. A long-lived isomeric state with T1/2 = 0.71(5) s and Kπ = 8- has been identified at 1278 keV, which decays to the ground-state and γ -vibrational bands through hindered electromagnetic transitions, as well as to the daughter nucleus 172Ho via allowed β decays. The robust nature of the Kπ = 8- isomer and the ground-state rotational band reveals an axially-symmetric structure for this nucleus. Meanwhile, the γ -vibrational levels have been identified at unusually low excitation energy compared to the neighboring well-deformed nuclei, indicating the significance of the microscopic effect on the non-axial collectivity in this doubly mid-shell region. The underlying mechanism of enhanced γ vibration is discussed in comparison with the deformed Quasiparticle Random-Phase Approximation based on a Skyrme energy-density functional.

172Dy↗
DOE OSTI2016

Open‐Pore Two‐Dimensional MFI Zeolite Nanosheets for the Fabrication of Hydrocarbon‐Isomer‐Selective Membranes on Porous Polymer Supports

Abstract Two‐dimensional zeolite nanosheets that do not contain any organic structure‐directing agents were prepared from a multilamellar MFI (ML‐MFI) zeolite. ML‐MFI was first exfoliated by melt compounding and then detemplated by treatment with a mixture of H 2 SO 4 and H 2 O 2 (piranha solution). The obtained OSDA‐free MFI nanosheets disperse well in water and can be used for coating applications. Deposits made on porous polybenzimidazole (PBI) supports by simple filtration of these suspensions exhibit an n ‐butane/isobutane selectivity of 5.4, with an n ‐butane permeance of 3.5×10 −7 mol m −2 s −1 Pa −1 (ca. 1000 GPU).

Zhang, Han↗