Search NASA⌕ Search

SEARCH · Search NASA

Results for “Impact Ice”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Numerical simulations and experimental measurements of steel and ice impacts on concrete for acoustic interrogation of delaminations in bridge decks

Delaminations in bridge decks typically result from corrosion of the top mat of reinforcing steel, which leads to a localized separation of the concrete cover from the underlying concrete. Because delaminations cannot be detected using visual inspection, rapid, large-area interrogation methods are desired to characterize bridge decks without disruption to traffic, without the subjectivity inherent in existing methods, and with increased inspector safety. To this end, disposable impactors such as water droplets or ice chips can be dropped using automatic dispensers onto concrete surfaces to excite mechanical vibrations while acoustic responses can be recorded using air-coupled microphones. In this work, numerical simulations are used to characterize the flexural response of a model concrete bridge deck subject to both steel and ice impactors, and the results are compared with similar experiments performed in the laboratory on a partially delaminated concrete bridge deck slab. The simulations offer greater understanding of the kinetics of impacts and the responses of materials.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Climate Impacts of Ice Nucleation

[1] Several different ice nucleation parameterizations in two different General Circulation Models (GCMs) are used to understand the effects of ice nucleation on the mean climate state, and the Aerosol Indirect Effects (AIE) of cirrus clouds on climate. Simulations have a range of ice microphysical states that are consistent with the spread of observations, but many simulations have higher present-day ice crystal number concentrations than in-situ observations. These different states result from different parameterizations of ice cloud nucleation processes, and feature different balances of homogeneous and heterogeneous nucleation. Black carbon aerosols have a small (-0.06 Wm -2 ) and not statistically significant AIE when included as ice nuclei, for nucleation efficiencies within the range of laboratory measurements. Indirect effects of anthropogenic aerosols on cirrus clouds occur as a consequence of increasing anthropogenic sulfur emissions with different mechanisms important in different models. In one model this is due to increases in homogeneous nucleation fraction, and in the other due to increases in heterogeneous nucleation with coated dust. The magnitude of the effect is the same however. The resulting ice AIE does not seem strongly dependent on the balance between homogeneous and heterogeneous ice nucleation. Regional effects can reach several Wm -2 . Indirect effects are slightly larger for those states with less homogeneous nucleation and lower ice number concentration in the base state. The total ice AIE is estimated at 0.27 ± 0.10 Wm -2 (1σ uncertainty). Finally, this represents a 20% offset of the simulated total shortwave AIE for ice and liquid clouds of -1.6 Wm -2 .

climate↗

Study of ice cluster impacts on amorphous silica using the ReaxFF reactive force field molecular dynamics simulation method

We study the dynamics of the collisions between amorphous silica structures and amorphous and crystal ice clusters with impact velocities of 1 km/s, 4 km/s, and 7 km/s using the ReaxFF reactive molecular dynamics simulation method. The initial ice clusters consist of 150 water molecules for the amorphous ice cluster and 128 water molecules for the crystal ice cluster. The ice clusters are collided on the surface of amorphous fully oxidized and suboxide silica. These simulations show that at 1 km/s impact velocities, all the ice clusters accumulate on the surface and at 4 km/s and 7 km/s impact velocities, some of the ice cluster molecules bounce back from the surface. At 4 km/s and 7 km/s impact velocities, few of the water molecules dissociations are observed. The effect of the second ice cluster impacts on the surfaces which are fully covered with ice, on the mass loss/accumulation is studied. These studies show that at 1 km/s impacts, the entire ice cluster accumulates on the surface at both first and second ice impacts. At higher impact velocities, some ice molecules which after the first ice impacts have been attached to the surface will separate from the surface after the second ice impacts at 7 km/s impact velocity. For the 4 km/s ice cluster impact, ice accumulation is observed for the crystal ice cluster impacts and ice separation is observed for the amorphous ice impacts. Observing the temperatures of the ice clusters during the collisions indicates that the possibility of electron excitement at impact velocities less than 10 km/s is minimal and ReaxFF reactive molecular dynamics simulation can predict the chemistry of these hypervelocity impacts. However, at impact velocities close to 10 km/s the average temperature of the impacting ice clusters increase to about 2000 K, with individual molecules occasionally reaching temperatures of over 8000 K and thus it will be prudent to consider the concept of electron excitation at these higher impact velocities, which goes beyond the current ReaxFF ability.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Secondary ice production during the break-up of freezing water drops on impact with ice particles

Abstract. We provide the first dedicated laboratory study of collisions of supercooled water drops with ice particles as a secondary ice production mechanism. We experimentally investigated collisions of supercooled water drops (∼ 5 mm in diameter) with ice particles of a similar size (∼ 6 mm in diameter) placed on a glass slide at temperatures >-12 ∘C. Our results showed that secondary drops were generated during both the spreading and retraction phase of the supercooled water drop impact. The secondary drops generated during the spreading phase were emitted too fast to quantify. However, quantification of the secondary drops generated during the retraction phase with diameters >0.1 mm showed that 5–10 secondary drops formed per collision, with approximately 30 % of the secondary drops freezing over a temperature range between −4 and −12 ∘C. Our results suggest that this secondary ice production mechanism may be significant for ice formation in atmospheric clouds containing large supercooled drops and ice particles.

54 ENVIRONMENTAL SCIENCES↗

Impacts of Ice Particle Shape and Density Evolution on the Distribution of Orographic Precipitation

Abstract An IMPROVE-2 orographic precipitation case is simulated using the Ice-Spheroids Habit Model with Aspect-Ratio Evolution (ISHMAEL) microphysics. In ISHMAEL, the evolution of ice particle properties such as mass, shape, size, density, and fall speed are predicted. These ice particle properties along with the ice size distributions from ISHMAEL and model-derived spatial distribution of accumulated precipitation are compared to observations. ISHMAEL predicts planar and columnar particles at spatial locations that agree with observations. Sensitivity simulations are used to explore the impact of predicting ice particle shape evolution on orographic cloud properties and precipitation compared to the traditional approach of representing snow and graupel using separate categories with conversion from snow to graupel during riming. High biases in both IWCs aloft and surface precipitation accumulation occur in the Umpqua River valley using separate snow and graupel categories because snow that does not convert to graupel is advected over the Coast Range and precipitates out in the valley. Improvements in IWCs aloft and surface precipitation using ISHMAEL occur from both predicting various vapor-grown habits and predicting the impact of partial riming on ice particle properties. Compared to traditional microphysics schemes, ISHMAEL also produces less spatial variability in accumulated precipitation.

54 ENVIRONMENTAL SCIENCES↗

Modeling sea ice has impact far beyond the poles

In the 1990s, a Los Alamos National Laboratory team developed a software package known as CICE that calculates the physics of sea ice, such as how it freezes, melts and moves across the ocean’s surface, influenced by external forces such as the ocean’s currents and the ever-shifting wind.

54 ENVIRONMENTAL SCIENCES↗

A review of black carbon in snow and ice and its impact on the cryosphere

Black carbon (BC) has emerged as an important short-lived climate forcer. Due to its light absorption properties, BC can darken the snow/ice surface, affect the energy balance, and further lead to acceleration of the cryospheric melting. By reviewing the recent published literatures, we present an overview of the historical changes, spatial distribution of BC in snow/ice, and how these changes are related to the melting of the cryosphere (e.g., glaciers, snow cover, and sea ice). Ice core records show an abrupt increase of BC concentrations that began in the 1850s and continued throughout the 20th century, which is consistent with an increase in BC emissions owing to industrialization. A decrease in the amount of BC since 1970s in Arctic and European ice cores has been partially attributed to the Clean Air Act. However, in the Himalayas, BC records show a continuous increase during this period. BC concentrations in snow and ice in the mid-latitude regions are one to two orders of magnitude higher than those in the polar regions. In particular, BC concentrations in aged snow and granular ice in ablation areas of mountain glaciers are one to three orders of magnitude higher than those in fresh snow or snowpits in the glacier accumulation areas due to BC accumulation during melting season. BC in the surface snow/ice is responsible for about 20% of the albedo reduction in the Tibetan Plateau during glacier melt season. Globally, observations and modeling results indicate that radiative forcing (RF) induced by BC in snow and ice is highest in the mid-latitudes, ranging from several W m–2 in fresh snow to hundreds of W m–2 in aged snow and granular ice in glacier ablation areas. The large BC-in-snow RF and associated snow albedo feedback lead to an acceleration in the total glacier melt (approximately 20%) and/or a reduction in the duration of the snow cover by several days, resulting in an increase of glacier discharge. Given our limited understanding of the role of BC in cryospheric melting, it is important to synthesize the existing research on the multi-scale processes related to BC in snow and ice to identify the gaps in our understanding of these processes and to propose a path forward to improve the quality of our observations of the aforementioned phenomena to fill these gaps.

Kang, Shichang↗

Seasonal Dependent Impact of Ice Cloud Longwave Scattering on the Polar Climate

Most climate models neglect cloud longwave (LW) scattering because scattering is considered negligible compared to strong LW absorption by clouds and greenhouse gases. While this rationale is valid for simulating extrapolar regions, it is questionable for the polar regions, where the atmosphere is dry and hence has weak absorption, and ice clouds that have strong scattering capability frequently occur. Using the slab-ocean Community Earth System Model, we show that ice cloud LW scattering can warm winter surface air temperature by 0.8–1.8 K in the Arctic and 1.3–1.9 K in the Antarctic, while this warming becomes much weaker in polar summer. Such scattering effect cannot be correctly assessed when sea surface temperature and sea ice are prescribed as this effect is manifested through a surface-atmosphere coupling. Furthermore, cloud LW scattering is a necessity for the correct simulation of polar climate and surface radiation budget, especially in the winter.

54 ENVIRONMENTAL SCIENCES↗

Barotropic tides in MPAS-Ocean (E3SM V2): impact of ice shelf cavities

Abstract. Oceanic tides are seldom represented in Earth system models (ESMs) owing to the need for high horizontal resolution to accurately represent the associated barotropic waves close to coasts. This paper presents results of tides implemented in the Model for Prediction Across Scales–Ocean or MPAS-Ocean, which is the ocean component within the U.S. Department of Energy developed Energy Exascale Earth System Model (E3SM). MPAS-Ocean circumvents the limitation of low resolution using unstructured global meshing. We are at this stage simulating the largest semidiurnal (M2, S2, N2) and diurnal (K1, O1) tidal constituents in a single-layer version of MPAS-O. First, we show that the tidal constituents calculated using MPAS-Ocean closely agree with the results of the global tidal prediction model TPXO8 when suitably tuned topographic wave drag and bottom drag coefficients are employed. Thereafter, we present the sensitivity of global tidal evolution due to the presence of Antarctic ice shelf cavities. The effect of ice shelves on the amplitude and phase of tidal constituents are presented. Lower values of complex errors (with respect to TPXO8 results) for the M2 tidal constituents are observed when the ice shelf is added in the simulations, with particularly strong improvement in the Southern Ocean. Our work points towards future research with varying Antarctic ice shelf geometries and sea ice coupling that might lead to better comparison and prediction of tides and thus better prediction of sea-level rise and also the future climate variability.

58 GEOSCIENCES↗

An Improved Convective Ice Parameterization for the NASA GISS Global Climate Model and Impacts on Cloud Ice Simulation

Partitioning of convective ice into precipitating and detrained condensate presents a challenge for GCMs since partitioning depends on the strength and microphysics of the convective updraft. It is an important issue because detrainment of ice from updrafts influences the development of stratiform anvils, impacts radiation, and can affect GCM climate sensitivity. Recent studies have shown that the CMIP5 configurations of the Goddard Institute for Space Studies (GISS) GCM simulated upper-tropospheric ice water content (IWC) that exceeded an estimated upper bound by a factor of 2. Partly in response to this bias, a new GCM parameterization of convective cloud ice has been developed that incorporates new ice particle fall speeds and convective outflow particle size distributions (PSDs) from the NASA African Monsoon Multidisciplinary Analyses (NAMMA), NASA Tropical Composition, Cloud and Climate Coupling (TC4), DOE ARM–NASA Midlatitude Continental Convective Clouds Experiment (MC3E), and DOE ARM Small Particles in Cirrus (SPARTICUS) field campaigns. The new parameterization assumes a normalized gamma PSD with two novel developments: no explicit assumption for particle habit in the calculation of mass distributions, and a formulation for translating ice particle fall speeds as a function of maximum diameter into fall speeds as a function of melted-equivalent diameter. Two parameters (particle volume– and projected area–weighted equivalent diameter) are diagnosed as a function of temperature and IWC in the convective plume, and these parameters constrain the shape and scale of the normalized gamma PSD. The diagnosed fall speeds and PSDs are combined with the GCM’s parameterized convective updraft vertical velocity to partition convective updraft condensate into precipitating and detrained components. A 5-yr prescribed sea surface temperature GCM simulation shows a 30%–50% decrease in upper-tropospheric deep convective IWC, bringing the tropical and global mean ice water path into closer agreement with CloudSat best estimates.

54 ENVIRONMENTAL SCIENCES↗

Sea-Ice Effects on the Alaskan Wave Climate

This study investigates the uncertainty of wave resource assessments due to sea ice in the nearshore region of Alaska using an innovative approach of combining remotely sensed data and a third-generation phase-averaged wave model. Modeling analysis focused on winter months, when high wave energy is present along with sea ice. This study includes recommendations to improve the accuracy of wave resource assessments and optimize marine and hydrokinetic device siting with consideration of sea-ice effects. Additional recommendations, based on preliminary sea-ice information in Cook Inlet, Alaska, are provided for a trajectory analysis of drifting sea ice and a collision risk assessment of sea ice and tidal turbines. The outcome of this project will provide valuable information about the level of sea-ice impact on the accuracy of wave resource assessments in the Alaska nearshore region, and of sea-ice collision risk with MHK devices and ocean observation systems during winter months when sea ice is present.

16 TIDAL AND WAVE POWER↗

Global Impacts of Arctic Sea Ice Loss Mediated by the Atlantic Meridional Overturning Circulation

We explore the global impacts of Arctic sea ice decline in climate model perturbation experiments focusing on the temporal evolution of induced changes. We find that climate response to a realistic reduction in sea ice cover varies dramatically between shorter decadal and longer multidecadal to centennial timescales. During the first two decades, when atmospheric processes dominate, sea ice decline induces a “bipolar seesaw” pattern in surface temperature with warming in the Northern and cooling in the Southern Hemisphere, leading to a northward displacement of the Intertropical Convergence Zone and an expansion of Antarctic sea ice. In contrast, on multidecadal and longer timescales, the weakening of the Atlantic meridional overturning circulation, caused by upper-ocean buoyancy anomalies spreading from the Arctic, mediates direct sea ice impacts and nearly reverses the original response pattern outside the Arctic. Lastly, the Southern Hemisphere warms, a Warming Hole emerges in the North Atlantic, the Intertropical Convergence Zone shifts southward, and Antarctic sea ice contracts.

58 GEOSCIENCES↗