Search NASA⌕ Search

SEARCH · Search NASA

Results for “Impervious surface”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Measuring and modeling soil moisture and runoff at solar farms using a disconnected impervious surface approach

Abstract Ground‐mounted photovoltaic sites are often treated as impervious surfaces in stormwater permits. This ignores the pervious soils beneath and between solar arrays and leads to an overestimation of runoff. Our objective was to improve solar farm stormwater hydrology models by explicitly considering the disconnected impervious nature of solar design and site characteristics. Experimental sites established on utility scale solar farms in Colorado, Georgia, Minnesota, New York, and Oregon had perennial vegetative plantings with mean precipitation ranging from 40.6 to 124.5 cm, and soil texture ranging from loamy sand to clay. Soil moisture measurements were collected beneath arrays, under drip edges, and in the vegetated area between arrays at each site. Hydrus‐3D models for soil moisture and stormwater hydrology were developed that accounted for precipitation falling on solar panels, drip edge redistribution of rainfall, infiltration, and runoff in the pervious areas between solar arrays and beneath panels. Drip edge runoff averaged 3‐ to 10‐times incident precipitation at the New York and Minnesota sites, respectively. Root mean square error values between measured sub‐hourly soil moisture and predicted moisture for large measured single storm events averaged 0.029 across all five sites. Predicted runoff depths were strongly affected by precipitation depth, soil texture, soil profile depth, and soil bulk density. Runoff depths across the five experimental sites averaged 13%, 25%, and 45% of the 2‐, 10‐, and 100‐year design storm depths, clearly showing that these solar farms do not behave like impervious surfaces, but rather as disconnected impervious surfaces with substantial infiltration of runoff in the vegetated areas between and beneath solar arrays.

Agriculture↗
DOE OSTI2014

Prior-knowledge-based spectral mixture analysis for impervious surface mapping

In this study, we developed a prior-knowledge-based spectral mixture analysis (PKSMA) to map impervious surfaces by using endmembers derived separately for high- and low-density urban regions. First, an urban area was categorized into high- and low-density urban areas, using a multi-step classification method. Next, in high-density urban areas that were assumed to have only vegetation and impervious surfaces (ISs), the Vegetation-Impervious model (V-I) was used in a spectral mixture analysis (SMA) with three endmembers: vegetation, high albedo, and low albedo. In low-density urban areas, the Vegetation-Impervious-Soil model (V-I-S) was used in an SMA analysis with four endmembers: high albedo, low albedo, soil, and vegetation. The fraction of IS with high and low albedo in each pixel was combined to produce the final IS map. The root mean-square error (RMSE) of the IS map produced using PKSMA was about 11.0%, compared to 14.52% using four-endmember SMA. Particularly in high-density urban areas, PKSMA (RMSE = 6.47%) showed better performance than four-endmember (15.91%). The results indicate that PKSMA can improve IS mapping compared to traditional SMA by using appropriately selected endmembers and is particularly strong in high-density urban areas.

Impervious surface↗
DOE OSTI2022

Quantifying the City-Scale Impacts of Impervious Surfaces on Groundwater Recharge Potential: An Urban Application of WRF–Hydro

Decades of urbanization have created sprawling, complex, and vulnerable cities, half of which are located in water-scarce areas. With the looming effects of climate change, including increasing droughts and water shortages, there is an urgent need to better understand how urbanization impacts the water cycle at city scale. Impervious surfaces disrupt the natural flow of water, affecting groundwater recharge in water-scarce cities, such as Los Angeles, looking to harness local water resources. In the face of growing water demand, informing on opportunities to maximize potential groundwater recharge can help increase cities’ resilience. WRF–Hydro, a physics-based hydrological modeling system, capable of resolving atmospheric, land surface, and hydrological processes at city scale, is adapted to represent urban impervious surfaces. The modified model is used to assess the hydrological implications of historical urbanization. Pre- and post-urban scenarios are used to quantify the impacts of impervious surfaces on the local water budget. Our results show that urbanization in LA has vastly decreased the potential for groundwater recharge, with up to half of the water inflow being redirected from infiltration in highly urbanized watersheds, while doubling surface runoff’s share of the city’s water budget, from ~15% to 30%. This study not only sheds light on the role of imperviousness on groundwater recharge in water-scarce cities, but also offers a robust and transferable tool for the management of urban land and water resources.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2014

How much of the world’s land has been urbanized, really? A hierarchical framework for evading confusion

Urbanization has transformed the world’s landscapes, resulting in a series of ecological and environmental problems. To assess urbanization impacts and improve sustainability, one of the first questions that we must address is: how much of the world’s land has been urbanized? Unfortunately, the estimates of the global urban land reported in the literature vary widely from less than 1% to 3% primarily because different definitions of urban land were used. To evade confusion, here we propose a hierarchical framework for representing and communicating the spatial extent of the world’s urbanized land at the global, regional, and more local levels. The hierarchical framework consists of three spatially nested definitions: “urban area” that is delineated by administrative boundaries, “built-up area” that is dominated by artificial surfaces, and “impervious surface area” that is devoid of life. These are really three different measures of urbanization. In 2010, the global urban land was close to 3%, the global built-up area was 0.65%, and the global impervious surface area was 0.45%, of the word’s total land area (excluding Antarctica and Greenland). We argue that this hierarchy of urban land measures, in particular the ratios between them, can also facilitate better understanding the biophysical and socioeconomic processes and impacts of urbanization.

Urbanization Global urban land Urban area Built-up↗
DOE OSTI2016

Urban stream deserts: Mapping a legacy of urbanization in the United States

Protecting, as well as restoring, natural resources within the urban landscape has environmental and economic importance, especially as the global population continues to shift towards urban areas. One extreme legacy of rapid development and urbanization is stream burial. Riverless urban areas are mapped in 11 Megaregions within the United States, with additional focus on the Great Lakes, using a semi-automated, geoprocessing workflow completed within ArcMap10.2. Combining U.S. Census Bureau Urban Areas (UAs), Impervious Surface Coverage (ISC) from the 2011 National Land Cover Dataset (NLCD), and National Hydrography Dataset (NHD) flowlines, allowed the delineation of urban stream deserts (UrbSDs), or watershed areas where stream channels have likely been buried or removed. Approximately 6.2% of the area of UAs (or 11,490 km 2 ) within the 11 Megaregions are UrbSD, and they are most prevalent in major cities in the North California and Great Lakes Megaregions. Specifically, 537 UrbSD exist within the Great Lakes Megaregion, with Detroit (MI) and Chicago (IL) comprising some of the largest UrbSDs in the United States. Regardless of Megaregion, UrbSDs represent the most intensely urbanized components of the urban environment, as UrbSDs have higher population densities, impervious surface coverage and developed land uses than adjacent urban areas. UrbSD are unique, but poorly understood, components of the urban ecosystem that highlights the consequences of sacrificing longterm environmental sustainability (e.g., ecosystem services) for short-term economic growth (rapid development).

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Urban Scaling as Validation for Predictions of Imperviousness From Population

Abstract Strategies for creating quantitative projections for human systems, especially impervious surfaces, are necessary to consider the human drivers of climate and ecosystem change. There are models that generate predictions of how impervious surfaces may change in response to different potential futures, but few tools exist for validating those predictions. We seek to fill that gap. We demonstrate a statistically robust sublinear scaling relationship between population and urban imperviousness across a 15 year history. We show that Integrated Climate and Land‐Use Scenarios (ICLUS) urbanization projections are also consistent with theory. These results demonstrate a theory that can be used to validate other models' predictions of urban growth and land cover change, analogous to the ways in which allometric scaling laws in biology have been used to validate process‐based models of ecosystem composition under different climate scenarios.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2026

Differences in urban plant community compositions across an urban-rural gradient in Knoxville, TN

Urban forests, or vegetation in areas under heavy human influence, provide many ecosystem services to urban residents such as localized cooling via evapotranspiration, shade, filtering of air pollution, and the associated health benefits of natural spaces. In order to quantify the magnitude of localized cooling by trees growing in varying levels of urbanization (based on % impervious surfaces, e.g., buildings, pavement), urban forest species composition, tree size, and tree density must be characterized. As a part of Oak Ridge National Laboratory’s (ORNL) urban forest temperature study, we conducted tree censuses in five Knoxville city parks where ORNL meteorological stations are deployed. Moreover, we measured every woody plant ≥ 5 cm diameter at breast height (DBH) within a 50 m radius of each site’s meteorological station for its DBH and species identification. When possible, individuals were identified down to species. Certain genera (Quercus spp., Carya spp., Pinus spp.) were identified down to genera in interest of time. Individual and total site basal area were calculated from measured DBH data. Results show notable differences in urban plant community compositions and total woody plant basal area across sites, with more urban sites closer to downtown (West View and SEEED) having lower tree basal area than the more suburban sites (West Hills, Cumberland Estates, and Victor Ashe). We identified 54 species across all sites, with West Hills and Victor Ashe having the highest species diversity. Our results show differences in forest compositions and sizes across Knoxville, which are currently informing ORNL’s evapotranspiration estimates for each site. Data Summary: Census data for West Hills (WH), Cumberland Estates (CE), Victor Ashe (VA), West View (WV), and Socially Equal Energy Efficient Development or SEEED (SD) urban forests in Knoxville, TN, USA, including tree size based on diameter at breast height (DBH; 1.3 m), species identification (Latin and common names), and basal area per stem (BA=π×[.5*DBH]^2). Field data are summarized in this file: “Community_Composition_Data.CSV”. Site-specific data detailing each site’s coordinates, number of stems measured at DBH, average tree DBH, α-diversity (number of species present), and total site basal area (sum of individual basal areas per site) are in this file: “Site_Comparisons.CSV”.

Warren, Jeffrey [ORNL] (ORCID:0000000206804697)↗
DOE OSTI2016

Nanoparticles in road dust from impervious urban surfaces: distribution, identification, and environmental implications

Nanoparticles (NPs) resulting from urban road dust resuspension are an understudied class of pollutants in urban environments with strong potential for health hazards. The objective of this study was to investigate the heavy metal and nanoparticle content of PM2.5 generated in the laboratory using novel aerosolization of 66 road dust samples collected throughout the mega-city of Shanghai (China). The samples were characterized using an array of techniques including inductively-coupled plasma mass spectrometry, aerosol size distribution measurements, and scanning and transmission electron microscopy coupled with elemental characterization and electron diffraction. Principal metal concentrations were plotted geospatially. Results show that metals were generally enriched in aerosolized samples relative to the bulk dust. Elevated concentrations of metals were found mostly in downtown areas with intense traffic. Fe-, Pb-, Zn-, and Ba-containing NPs were identified using electron microscopy, spectroscopy, and diffraction, and we tentatively identify most of them as either engineered, incidental, or naturally occurring NPs. For example, dangerous Pb sulfide and sulfate NPs likely have an incidental origin and are also sometimes associated with Sn; we believe that these materials originated from an e-waste plant. Size distributions of most aerosolized samples presented a peak in the ultrafine range (<100 nm). We estimate that 3.2 ± 0.7 μg mg -1 of Shanghai road dust may become resuspended in the form of PM2.5. Aerosolization, as done in this study, seems to be a very useful approach to study NPs in dust.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Influence of urban extent discrepancy on the estimation of surface urban heat island intensity: A global-scale assessment in 892 cities

The estimation of surface urban heat island intensity (SUHII) is crucial for studying the urban thermal environment, which is influenced not only by the commonly known definition of rural reference but also by the delineation of urban extent. Existing studies relies on various urban extent products defined in different ways, and the influence of urban extent discrepancy (UED) on SUHII estimates still remains unclear. In this study, we collected five open-source global urban extent products (GUEPs) for the year 2015 and corresponding daily land surface temperature (LST) observations (MYD11A1). Based on these products, we quantified the UED-induced uncertainty in SUHII estimates by comparing absolute difference (ΔSUHII AD ) and relative difference (ΔSUHII RD ) in SUHII among GUEPs across 892 global cities. Additionally, we introduced an ISF-constrained (ISF–C) method to reduce SUHII differences among GUEPs by constraining the impervious surface fraction (ISF) within urban and rural extents. The results show that urban extents delineated by different GUEPs are not consistent, leading to their difference in ISF as well as LST, which in turn causes uncertainties in the estimated SUHII. On average for global cities, the annual daytime and nighttime ΔSUHII AD are 0.46 ± 0.02 °C (mean ± 95% confidence interval) and 0.24 ± 0.01 °C, with corresponding ΔSUHII RD of 42.0 ± 2.7% and 35.2 ± 2.3%, respectively. The UED-induced uncertainty in SUHII estimates varies among climate zones, and the annual daytime ΔSUHII RD averaged for cities located in the arid zone reaches up to 60.8 ± 6.6%, which is nearly twice as high as that in other climate zones. More importantly, both ΔSUHII AD and ΔSUHII RD show lower values when using the ISF-C method, implying the effectiveness of this method. This study highlights the non-negligible impact of UED on the estimation of SUHII, which requires more attention due to the inconsistency of urban extents among current products.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2026

Model data for infrastructure-aware simulation of compound flooding at Alligator Bayou Watershed, southeast Texas

This dataset supports infrastructure-aware hydrologic modeling and flood scenario analysis for the Alligator Bayou Watershed, a highly managed urban watershed in Southeast Texas. It includes Jupyter notebooks for figure reproduction, model configuration files, simulation outputs, and derived products used to quantify the influence of engineered stormwater infrastructure on flood behavior across multiple spatial scales. The dataset was generated using the Watershed Workflow Python package and the Advanced Terrestrial Simulator (ATS), enabling integrated surface–subsurface hydrologic simulations on a channel-aligned mesh with explicit representations of pump stations, gate structures, detention basins, and impervious surfaces. Outputs include time series of gate and pump flows, stage observations, and water balance components, as well as spatially explicit fields of peak ponded depth and flood duration across multiple infrastructure scenarios spanning a single-location detention basin expansion, distributed drainage limitations, and compound coastal flooding. These data facilitate full reproducibility of the manuscript figures and support further research on urban flood dynamics and the role of stormwater infrastructure in shaping watershed-scale flood response.

EARTH SCIENCE > OCEANS > COASTAL PROCESSES↗
DOE OSTI2014

What are hot and what are not in an urban landscape: quantifying and explaining the land surface temperature pattern in Beijing, China

Understanding how landscape components affect the urban heat islands is crucial for urban ecological planning and sustainable development. The purpose of this research was to quantify the spatial pattern of land surface temperatures (LSTs) and associated heat fluxes in relation to land-cover types in Beijing, China, using portable infrared thermometers, thermal infrared imagers, and the moderate resolution imaging spectroradiometer. The spatial differences and the relationships between LSTs and the hierarchical landscape structure were analyzed with in situ observations of surface radiation and heat fluxes. Large LST differences were found among various land-use/land-cover types, urban structures, and building materials. Within the urban area, the mean LST of urban impervious surfaces was about 6–12°C higher than that of the urban green space. LSTs of built-up areas were on average 3–6°C higher than LSTs of rural areas. The observations for surface radiation and heat fluxes indicated that the differences were caused by different fractions of sensible heat or latent heat flux in net radiation. LSTs decreased with increasing elevation and normalized difference vegetation index. Variations in building materials and urban structure significantly influenced the spatial pattern of LSTs in urban areas. By contrast, elevation and vegetation cover are the major determinants of the LST pattern in rural areas. In summary, to alleviate urban heat island intensity, urban planners and policy makers should pay special attention to the selection of appropriate building materials, the reasonable arrangement of urban structures, and the rational design of landscape components.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2023

Global mapping of urban thermal anisotropy reveals substantial potential biases for remotely sensed urban climates

Urban thermal anisotropy (UTA) drastically biases satellite-derived urban surface temperatures and fluxes, and consequently inhibits a more comprehensive understanding of global urban climates. However, UTA patterns and associated biases in observed urban climate variables have not been investigated across an adequate number of global cities with diverse contexts; nor is it known whether there are globally measurable factors that are closely related to the UTA intensity (UTAI, quantified as the maximum difference between the nadir and off-nadir urban thermal radiation). Here we investigate the UTAI over more than 5500 cities worldwide using the moderate resolution imaging spectroradiometer (MODIS) multi-angle land surface temperature (LST) observations from 2003 to 2021. The results show that the global mean UTAI can reach 5.1, 2.7, 2.4, and 1.7 K during summer daytime, winter daytime, summer nighttime, and winter nighttime, respectively. Using nadir LST observations as a reference, our analysis reveals that UTA can lead to an underestimation of satellite-based urban surface sensible heat fluxes ( H ) by 45.4% and surface urban heat island intensity ( I s ) by 43.0% when using LST observations obtained from sensor viewing zenith angles (VZAs) of ±60°. However, practitioners can limit the biases of H and I s within ±10% by using LSTs from sensor VZAs within ±30°. We find that UTAI is closely related to urban impervious surface percentage and surface air temperature across global cities. In conclusion, these findings have implications for angular normalization of satellite-retrieved instantaneous LST observations across cities worldwide.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Geospatial Diffusion for Land Cover Imperviousness Change Forecasting

Land-use and land-cover (LULC) has a significant effect on several Earth system processes. For example, impervious surfaces reduce infiltration and speed water flow, impacting regional hydrology and flood risk. While Earth System models have improved forecasting hydrologic and atmospheric processes at higher resolutions, the ability to forecast LULC change has lagged behind. In this paper, we propose a new paradigm exploiting Generative AI (GenAI) for land cover change forecasting by framing it as a data synthesis problem conditioned on historical and auxiliary data-sources. To demonstrate the feasibility of our methodology, we perform experiments where a diffusion model is trained for decadal forecasting of imperviousness change across the entire United States. We find that our model yields MAE lower than a no-change baseline for resolutions ≥ 0.7 X 0.7km2 on average, demonstrating its ability to capture and project accurate spatiotemporal patterns. Finally, we discuss future research to incorporate Earth's physical properties and enabling scenario simulations via driver variables.

Varshney, Debvrat [ORNL] (ORCID:0000000188981736)↗
DOE OSTI2021

Role of underlying surface, rainstorm and antecedent wetness condition on flood responses in small and medium sized watersheds in the Yangtze River Delta region, China

Floods are becoming more frequent and are hard to control due to the shortage of water conservancy projects in small and medium sized basins, especially in developing regions. Understanding the hydrologic responses and estimated flood characteristics to storm events can help to predict flood disasters and form better effective mitigation and adaptation strategies. Here, using observations of several representative watersheds and Artificial Neural Networks (ANN) and Principal Component Regression (PCR) models, we conducted data-driven analyses to examine the flood responding characteristics. We quantified the relative contributions of the influencing factors to the variation of each flood characteristic. Statistical analysis of the observations shows that the drainage area plays a key role in determining the distribution of lag time and peak discharge. Rainstorm variability has direct influence on floods, and typhoon-induced rainstorms with high total rainfall and rainfall intensity generate higher lag time, flood peak, unit discharge and runoff depth, but lower runoff coefficient. The ANN and PCR models accurately predicted the variations of flood features using the driving factors including physical geographical characteristics, rainstorm features, and antecedent condition. Physical geographic characteristics are key influential factors of lag time, flood peak and runoff coefficient, while the rainstorm features control the magnitude of unit discharge and runoff depth. These results indicate that floods are mainly affected by rainstorm features and physical geographic characteristics in the Yangtze River delta, and it might become more damaging with the increasing rainfall extremes and sprawling impervious surfaces in a changing environment.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2019

The Urban Hydrological System

This chapter treats the urban system’s intersection with the water cycle. The water cycle will be explained, and the city’s local and regional effects will be examined. These will include water routing to and from humans: water consumption (drinking and other uses) and sewering systems; runoff interactions: how impervious surface affects runoff from precipitation events, including the storm hydrograph, particle transport from streets, and combined storm overflows; atmospheric interactions: how the urban heat island and air pollution affect evapotranspiration and precipitation; urban recipient waters: streams, lakes, rivers, estuaries, and wetlands; the role of green infrastructure in the hydrological cycle; and the potential impacts of climate change.

Urban hydrological system, Urban water cycle, Urba↗
DOE OSTI2023

Urbanization effects on the spatial patterns of spring vegetation phenology depend on the climatic background

Cities have been considered ideal surrogates for evaluating ecological responses to climate warming. Although research has revealed that the urban heat island effect is not the only determinant that drives the rural-urban difference in spring phenology, limited attempts further explore the effect of complex interactions between urbanization and climates on the start of the season (SOS). Here, we employed the percentage of impervious surface area as an indicator of urbanization levels, incorporating the urban heat island (UHI) effect and climates to decipher the multiple effects on the temporal shift in SOS. Our results suggest that urbanization, the UHI effect, and climates jointly drive the phenological timing in cities. Further, the SOS is highly linearly correlated with urbanization levels and UHI effects (p<0.001) in the zones with warm and humid climates, whereas relatively warmer, cooler, or arid climates break down the linearity. Geographically, the SOS is north-south symmetrical for the rural-urban ecosystem at the national scale, which initiates at the mid-latitudes (around 30 °N, 67.58 DOY ± 2.23 days) first and then towards the low (around 20 °N, 105.25 DOY ± 1.31 days) and high-latitudes (45 °N, 123.01 DOY ± 1.45 days). Chilling accumulation and spring temperature jointly contribute to this phenomenon. As the UHI effect is similar to the projected global warming in the future, understanding the phenological responses to urbanization in various climates is insightful for evaluating the impact of future warming on plants' phenological behavior in the global ecosystem.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2018

Modification of the association between high ambient temperature and health by urban microclimate indicators: A systematic review and meta-analysis

Highlights: • We summarized epidemiology papers that assessed modification of heat and health associations by microclimate indicators. • Temperature and health associations were stronger among those living in hotter and less vegetated areas within cities. • Further research on relationships between landscape, localized temperature, and health will advance current understanding. Landscape characteristics, including vegetation and impervious surfaces, influence urban microclimates and may lead to within-city differences in the adverse health effects of high ambient temperatures.

54 ENVIRONMENTAL SCIENCES↗