Search NASA⌕ Search

SEARCH · Search NASA

Results for “In-situ Raman spectroscopy”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Influence of electrical field on the susceptibility of gallium nitride transistors to proton irradiation

Radiation susceptibility of electronic devices is commonly studied as a function of radiation energetics and device physics. Often overlooked is the presence or magnitude of the electrical field, which we hypothesize to play an influential role in low energy radiation. Accordingly, we present a comprehensive study of low-energy proton irradiation on gallium nitride high electron mobility transistors (HEMTs), turning the transistor ON or OFF during irradiation. Commercially available GaN HEMTs were exposed to 300 keV proton irradiation at fluences varying from 3.76 × 10 12 to 3.76 × 10 14 cm 2 , and the electrical performance was evaluated in terms of forward saturation current, transconductance, and threshold voltage. The results demonstrate that the presence of an electrical field makes it more susceptible to proton irradiation. The decrease of 12.4% in forward saturation and 19% in transconductance at the lowest fluence in ON mode suggests that both carrier density and mobility are reduced after irradiation. Additionally, a positive shift in threshold voltage (0.32 V and 0.09 V in ON and OFF mode, respectively) indicates the generation of acceptor-like traps due to proton bombardment. high-resolution transmission electron microscopy and energy dispersive x-ray spectroscopy analysis reveal significant defects introduction and atom intermixing near AlGaN/GaN interfaces and within the GaN layer after the highest irradiation dose employed in this study. According to in-situ Raman spectroscopy, defects caused by irradiation can lead to a rise in self-heating and a considerable increase in (∼750 times) thermoelastic stress in the GaN layer during device operation. The findings indicate device engineering or electrical biasing protocol must be employed to compensate for radiation-induced defects formed during proton irradiation to improve device durability and reliability.

gallium nitride↗
DOE OSTI2025

Direct observation of key aluminum hydroxide prenucleation oligomers for gibbsite nucleation and crystallization in sodium aluminate solution by liquid ToF-SIMS

The mechanism of gibbsite (aluminum hydroxide) crystallization from highly alkaline solutions such as Bayer liquors remains poorly understood, where aluminum (Al) transforms from largely tetrahedrally coordinated aluminate monomers in sodium aluminate solutions into a network of octahedra in gibbsite crystals. A variety of traditional analytical approaches applied to this system do not readily reveal the presence of higher-order oligomeric intermediates. To overcome this limitation, we employed in-situ liquid Time-of-Flight Secondary Ion Mass Spectrometry (ToF-SIMS) to examine the Al species present in concentrated sodium aluminate solutions favoring crystallization of gibbsite or sodium aluminate. A complex mixture of Al oligomers was found. By comparing the change in the relative concentration of Al oligomers with +1 and -1 charge, we were able to identify three major Al oligomer candidates, iso-tetramers, iso-pentamers, and cyclic-hexamers, for the nucleation and crystallization of gibbsite. The concentrations of iso-tetramers and iso-pentamers significantly surpass those of cyclic-hexamers. Time-dependent in-situ Raman spectroscopy analysis indicated that the appearance of gibbsite coincided with the peak concentration of these oligomers. The Density-functional theory (DFT) calculation suggests that the formation of iso-oligomers is more favorable than that of cyclic-hexamers. The combined results suggest that iso-tetramers and iso-pentamers play the most substantial role in the nucleation and growth of gibbsite in the sodium aluminate solutions. Our findings also suggest that the oligomers that promote gibbsite crystallization are more stable in dilute sodium aluminate solutions, making these solutions particularly suitable for efficient gibbsite crystallization. In conclusion, our study fills a major knowledge gap in understanding Al speciation that leads to the nucleation and crystallization of gibbsite in concentrated sodium aluminate solutions.

Bayer liquor↗
DOE OSTI2025

Gas Hydrate Film Growth in Microfluidic Channels for Carbon Dioxide Capture and Sequestration Applications

Gas or clathrate hydrates are a solid, crystalline compound composed of water and guest molecules that typically form at high pressure and low temperature conditions. Carbon dioxide (CO2) hydrates may be involved in several carbon dioxide capture and sequestration (CCS) applications, including CO2 pipeline transportation and CO2 offshore sequestration. Within these applications, the formation mechanism and kinetics must be well understood to manage the CCS processes, either by preventing or promoting hydrate formation. In this work, a high-pressure glass microfluidic reactor is used in tandem with visual microscopy and in-situ Raman spectroscopy to study both the morphological and kinetic behavior of gas hydrate crystals. Subcooling, pressure, and CO2 flow rate are investigated for their impact on the thickening behavior of pure CO2 hydrates, with flow rate being the only parameter to have a significant effect. Visual and Raman spectroscopy evidence show that both a dense hydrate layer and a porous hydrate layer form, and the latter may provide a path for mass transfer to continue hydrate crystallization. A first principles mass transfer model is developed to describe CO2 hydrate crystal thickening at the interface between gas and water. The impacts of gas impurities and channel wettability are also studied. This method is further applied to investigate the conversion of methane hydrate to CO2 hydrate for combined energy recovery and methane hydrate formation. The authors acknowledge the US Department of Energy Basic Energy Science award # DE-SC0022162.

Wadsworth, Lindsey [Colorado School of Mines, Gold↗
DOE OSTI2025

In situ high-temperature Raman spectroscopy for online EAF slag analysis

Real-time monitoring of slag chemistry is critical for optimizing Electric Arc Furnace (EAF) steelmaking operations, where dynamic variations in slag composition directly influence slag foaming, refractory degradation, and thermal efficiency. Conventional techniques such as X-ray fluorescence (XRF), Fourier-transform infrared (FTIR), and scanning electron microscopy coupled with energy-dispersive X-ray spectroscopy (SEM-EDS) are commonly used to analyze slag composition, but their offline nature and equipment constraints limit their applicability for online monitoring in harsh industrial environments. To address this challenge, we present an in situ, high-temperature analytical approach that integrates Raman spectroscopy with a custom designed fiber-optic probe for real-time slag characterization at 1550 °C. The system enables non destructive spectral acquisition from molten slags, providing molecular-level insights into silicate polymerization and iron oxidation states. Eight synthetic slag samples were evaluated, and key Raman features—such as Q n silicate units and FeO₄/FeO₆ coordination environments—were identified and quantitatively correlated with slag basicity and Fe₂O₃ content. The results demonstrate agreement between Raman spectral ratios and bulk slag chemistry, validating the method’s capability to track compositional and structural changes under molten temperature. This work establishes the feasibility of deploying fiber-optic Raman probe for online EAF slag monitoring and highlights their potential to support closed-loop control strategies, thereby enhancing process stability, refractory protection, and steel quality in industrial steelmaking applications.

47 OTHER INSTRUMENTATION↗
DOE OSTI2024

Synergistic Effects of the Electric Field Induced by Imidazolium Rotation and Hydrogen Bonding in Electrocatalysis of CO 2

The roles of the ionic liquid, 1-ethyl-3-methylimidazolium tetrafluoroborate ([EMIM][BF₄]), and water in controlling the mechanism, energetics, and electrocatalytic activity of CO₂ reduction to CO on silver in non-aqueous electrolytes were investigated. The first electron transfer occurs to CO₂ at reduced overpotentials when it is trapped between the planes of [EMIM]⁺ ring and electrode surface due to cation re-orientation as determined from voltammetry, in-situ surface-enhanced Raman spectroscopy, and density functional theory calculations. Within this interface, water up to 0.5 M does not induce significant faradaic activity, opposing the notion of it as a free proton source. Instead, water acts as a hydrogen bond donor and the proton is sourced from [EMIM]⁺. Furthermore, this study demonstrates that alcohols with varying acidity tune the hydrogen bonding network in the interfacial microenvironment to lower the energetics required for CO₂ reduction. Here, the hydrogen bonding suppresses the formation of inactive carboxylate species, thus preserving the catalytic activity of [EMIM]⁺. The ability to tune the hydrogen bonding network opens new avenues for advancing IL-mediated electrocatalytic reactions in non-aqueous electrolytes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Fe-single atom catalysts facilitate fast electron transfer with MoS 2 /SnS 2 cathodes in lithium–sulfur batteries

Lithium–sulfur batteries (LSBs) emerge as promising next-generation energy storage systems offering cost-effectiveness, environmental friendliness, and high theoretical energy density. The practical implementation of LSBs faces significant hindrances due to the shuttle effect and sluggish redox reactions. To address these challenges, single-atom catalyst (SAC) based combination materials from d-block elements can offer increased active catalytic sites, rapid charge transfer, accelerated electron migration, and fast sulfur redox conversion kinetics of lithium polysulfides (LiPSs). In this study, we fabricated three different LSB cathodes: pure S, S@MoS 2 /SnS 2 , and S@Fe–MoS 2 /SnS 2 . These cathodes were then used to explore the cycle life, capacity, rate capability, and redox kinetic reactions of LiPSs while assessing the influence of Fe-SACs on their performance. As a result, LSBs with S@Fe–MoS 2 /SnS 2 cathodes demonstrate an extended cycle life of 1000 cycles at a C-rate of 0.2C, maintaining a capacity close to 500 mA h g −1 , the highest initial discharge capacity of 1622 mA h g −1 and 1066 mA h g −1 at 0.05C and 0.2C, and excellent rate capabilities of 708 mA h g −1 and 558 mA h g −1 at 1C and 2C, respectively. The synergistic effect of the Fe-SAC-based combination cathode (S@Fe–MoS 2 /SnS 2 ) creates plentiful adsorptive and highly active catalytic sites, resulting in substantially enhanced capacity for adsorbing soluble long-chain LiPSs. This facilitates ultra-fast redox kinetics, surpassing the performance of the S@MoS 2 /SnS 2 and pure S cathodes. In the ex situ analysis, results from powder X-ray diffraction (XRD) to observe the new phase, soft X-ray absorption spectroscopy (XAS) to investigate the electronic structure, and hard X-ray photoelectron microscopy (HAXPES) with different energies (900 eV, 2000 eV, and 6000 eV) to track the chemical-state evolution of Fe-SACs in MoS 2 /SnS 2 cathodes displayed notable electrochemical reversibility involving S 8 ⇄ LiPSs ⇄ Li 2 S conversion even after 1000 cycles. Additionally, in situ, operando Raman analysis can unveil a novel catalytic mechanism of Fe-SACs in MoS 2 /SnS 2 “facilitating rapid electron transfer” during the discharge and charge processes of LSBs involving the conversion of S 8 ⇄ long-chain LiPSs ⇄ Li 2 S 2 /Li 2 S. This study elucidates the working mechanism of Fe-SAC cathodes, offering insights into overcoming the shuttle effect and facilitating sulfur redox kinetics to advance commercial LSBs.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Uncertainty analysis of Raman spectra for measuring ortho-parahydrogen compositions

Determining ortho-parahydrogen compositions at cryogenic temperatures is an important quality control for liquid hydrogen custody exchange. High orthohydrogen compositions lead to an exothermic reaction resulting in increased boil off and increased venting losses of liquid hydrogen product by either the supplier or consumer. Traditional methods for measuring ortho-parahydrogen compositions such as hot-wire anemometry, nuclear magnetic resonance, and infrared spectroscopy are typically inconvenient at best. As the number of cryogenic hydrogen systems continue to increase, there is an increased need for flexible, standardized techniques for post processing composition measurements. A Raman spectrometer implemented in the Cryo-Catalysis Hydrogen Experimental Facility (CHEF) has demonstrated incredible flexibility for composition measurements of cryogenic hydrogen flows through a wide range of temperatures and pressures with the Raman probe in-situ at cryogenic temperatures. This article analyzes the uncertainty of Raman spectroscopy data of cryogenic hydrogen equilibrated at temperatures in IONEX catalyst. Spectra from hydrogen catalyzed to the equilibrium ortho-parahydrogen composition are processed and compared to expected statistical distributions for method verification.

08 HYDROGEN↗
DOE OSTI2025

Best practices for in-situ and operando techniques within electrocatalytic systems

In-situ and operando techniques in heterogeneous electrocatalysis are a powerful tool used to elucidate reaction mechanisms. Ultimately, they are key in determining concrete links between a catalyst’s physical/electronic structure and its activity en route to designing next-generation systems. To this end, the exact execution and interpretation of these lines of experiments is critical as this determines the strength of conclusions that can be drawn and what uncertainties remain. Instead of focusing on how techniques were used to understand systems, as is the case with most reviews on the topic, this work instead initiates a nuanced discussion of 1) how to best carry out each technique and 2) initiate a nuanced analysis of which level of insights can be drawn from the set of in-situ or operando experiments/controls carried out. We focus on several commonly used techniques, including vibrational (IR, Raman) spectroscopy, X-ray absorption spectroscopy and electrochemical mass spectrometry. In addition to this, we include sections of reactor design and the link with theoretical modelling that are applicable across all techniques. While we focus on heterogeneous electrocatalysis, we make links when appropriate to the areas of photo- and thermo-catalytic systems. We highlight common pitfalls in the field, how to avoid them, and what sets of complementary experiments may be used to strengthen the analysis. We end with an overview of what gaps remain in in-situ and operando techniques and what innovations must be made to overcome them.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Discovery of a new phase transition and high-valent redox mechanism in Fe-substituted Na 2 Mn 3 O 7

Sodium-ion batteries are a promising lower-cost alternative to lithium-ion batteries, but further improvements in electrochemical performance are required. One strategy to increase capacity is to enable reversible high-valent cationic and anionic redox in layered cathode materials; however, this is typically accompanied by structural degradation. Here, in this study, we elucidate the mechanism by which Fe-doped Na 2 Mn 3 O 7 , featuring ordered transition metal-vacancies, achieves reversible high-valent redox. Using Mössbauer spectroscopy, soft X-ray absorption spectroscopy (XAS), and in-situ hard XAS, we demonstrate reversible high-valent cationic redox involving both Fe and Mn while in-situ Raman confirms the absence of local structural degradation associated with oxygen redox. Combining in-situ X-ray diffraction with theoretical calculations, we further identify a previously unreported global phase transition from the $\bar{P1}$ to the $P2_1/c$ space group during electrochemical cycling and develop a physical model describing this structural evolution. These results provide insights for structurally stable layered sodium transition metal oxide cathodes with reversible high-valent redox.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Enhanced production of active species and NH 3 using non-equilibrium ferroelectric barrier discharge

Non-equilibrium plasma-assisted ammonia synthesis is investigated through enhanced active species production with ferroelectric discharge. Time-resolved in-situ diagnostics of femtosecond two-photon absorption laser-induced fluorescence, coherent anti-Stokes Raman scattering, and laser absorption spectroscopy, as well as optical emission spectroscopy, were conducted to probe the key intermediate species, such as H and N radicals as well as N 2 (ν), ions, and NH 3 to achieve better understanding of non-equilibrium energy transfer and ammonia formation. The results reveal that ferroelectric discharge improved ammonia yield by four times. Results also show that ferroelectrics not only enhanced ions (N 2 + ) production, radicals (N, H) number density, but also increased the N 2 vibrational temperature. Further plasma modeling identified the couplings between elevated radical and ion production and enhanced vibrational excitation reactions, e.g., N + H 2 (ν)→NH + H, N 2 (ν)+H → NNH, N 2 + + H 2 → H + N 2 H + , and N 2 H + +e→NH + N, facilitated by ferroelectric discharge. These findings provide critical insight into the mechanism of ferroelectric plasma catalysis and highlight their potential in advancing energy-efficient chemical synthesis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Electrosynthesis of high purity ethylene using high-index facet Cu 2 O nanocrystals electrocatalyst

Electrochemical CO 2 reduction reaction (eCO2RR) to multi-carbon (C 2+ ) products with copper-based catalysts is often limited by poor selectivity. This challenge arises from the concurrent formation of various intermediates, dictated by the atomic arrangement and electronic properties of surface atoms. In this study, we found that copper (I) oxide (Cu 2 O) nanocrystals with 50 facets (50F-NC), predominantly featuring (211) facets that offers high density of under-coordinated sites, demonstrate superior ethylene (C 2 H 4 ) selectivity of 92% ± 2 with an overall current density of 212 mA/cm 2 at -650 mV vs RHE. Furthermore, after one month of storage in a 1 M KOH electrolyte, this catalyst demonstrated a C 2 H 4 Faradaic efficiency of 87% highlighting its stabile structure under strong alkaline environments. Here, operando electrochemical Raman spectroscopy revealed enhanced CO* intermediate coverage on the 50F-NC catalyst, correlating with improved C-C coupling. SEM, TEM, and XPS analyses, along with DFT calculations, suggested that Cu sites on the (211) facet of 50F-NC and those at the Cu/Cu 2 O interface formed in-situ due to the surface reconstruction during the reaction, are likely active sites for effective C-C coupling and sustained high-rate C 2 H 4 production.

Cu nano particle↗
DOE OSTI2025

Hydrotrope-enabled high concentration aqueous electrolytes for reversible and sustainable iron metal anodes

Iron metal-based energy storage devices hold great potential in stationary grid-scale sustainable energy due to the high theoretical specific capacity, ultralow cost, and abundance of iron. However, their practical deployment is limited by the poor reversibility of iron plating and stripping, as well as competitive hydrogen evolution. Here we introduce the concept of hydrotropy into iron electrolytes by developing an environmentally friendly and cost-effective high-concentration ferrous sulfate electrolyte using urea as a hydrotropic agent. The designed electrolyte increases the Coulombic efficiency of iron metal electrodes to approximately 96.5%, compared with ~84.6% for the dilute electrolyte. Molecular dynamics simulations and Raman spectroscopy illustrate that urea regulates the competitive coordination of anions and urea in the iron solvation sheath, while reconstructing the hydrogen-bond network in free water molecules. This reduces the activity of both solvated and free water, thereby alleviating hydrogen evolution. Moreover, the coordinated anions and urea molecules facilitate the in-situ formation of an organic-inorganic hybrid protective layer on the metallic iron, establishing a physical barrier against water and promoting homogeneous interfacial reactions. This work demonstrates an appealing opportunity to design cost-effective and high-performance electrolytes and propels the practical application of iron metal-based energy storage devices.

Feng, Guangxia [Stanford Univ., CA (United States)↗
DOE OSTI2024

The effects of thickness, polarization, and strain on vibrational modes of 2D Fe 3 GeTe 2

In this study, we investigated the effects of thickness, light polarization, and strain on the Raman spectra of two-dimensional (2D) Fe 3 GeTe 2 (FGT) crystals synthesized via chemical vapor transport. The crystals are thoroughly characterized using a combination of microscopic, diffraction, and spectroscopic techniques. Particularly, a systematic angle-resolved polarized Raman spectroscopy study reveals a clear polarization dependence of the Raman intensity in both parallel and crossed polarization directions, with the $A$$^{1}_{g}$ mode completely disappearing in the crossed polarization direction. The angle-dependent intensity of both the $A$$^{1}_{g}$ and $E$$^{2}_{2g}$ modes in parallel polarization and the intensity of the $E$$^{2}_{2g}$ mode in the crossed polarization remain constant at all angles. These findings align with predictions from Raman tensor analysis, providing compelling evidence for the unambiguous assignment of the $A$$^{1}_{g}$ and $E$$^{2}_{2g}$ modes to specific peaks observed in the Raman spectrum of FGT, resolving existing confusion in the literature regarding their assignment. Furthermore, we examine the effect of strain on the Raman spectrum of 2D FGT in-situ using a bending device. Our study, conducted on a monolayer to few-layer 2D FGT deposited onto polyethylene terephthalate and subjected to outward (inward), i.e., tensile (compressive) bending, demonstrates appreciable downshifting (upshifting) of the Raman peak position of both $A$$^{1}_{g}$ and $E$$^{2}_{2g}$ modes. Furthermore, these findings are particularly significant given that strain engineering represents an effective approach to modulate the magnetic properties of FGT and other 2D magnetic materials.

2D materials↗
DOE OSTI2026

Influence of thermal treatment on structure and catalytic performance of ceria-zirconia supported copper oxide (CuO x /Ce y Zr 1-y O 2 ) catalysts for CO oxidation

Copper oxide (CuO x ) supported on ceria-zirconia (Ce y Zr 1-y O 2 , y = 1.0, 0.5, 0.0) catalysts were investigated to elucidate the effects of thermal treatment on their physicochemical properties and catalytic performance in carbon monoxide (CO) oxidation. Here, the catalysts were synthesized via a one-pot chemical vapor deposition (OP-CVD) method at 700˚C and 900˚C with controlled Cu loading. Characterization techniques, including synchrotron X-ray diffraction (S-XRD), Raman spectroscopy, X-ray photoelectron spectroscopy (XPS), inductively coupled plasma spectroscopy (ICP), and N 2 adsorption-desorption, were implemented to probe the crystalline structure, molecular and electronic structure, oxygen vacancies, specific surface area (SSA) and metal loading. CO oxidation was chosen as a model reaction to explore the structure-catalytic performance relationship. A ∼100% CO conversion was achieved at < 150˚C, particularly with the CuO x /CeO 2 catalyst calcined at 700˚C. In contrast, calcination at 900˚C caused a ∼90% decrease in SSA and a ∼24% increase in T 50 . Activity tests revealed that increasing ZrO 2 content lowered CO oxidation activity despite generating more defect sites. In-situ measurement of the 700 °C calcined samples revealed the presence of stable and unstable defects in CuO x /Ce 0.5 Zr 0.5 O 2 and CeO 2 respectively, which play a key role in the activity of the catalysts. The results highlight that catalytic performance is closely related to the SSA. Furthermore, an optimum calcination temperature favor significant oxygen vacancy formation with required CuO x -support interactions, enhancing redox properties and catalytic performance.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Storage-Induced Collapse of Lignin Macromolecular Structure and Its Impacts on the Biorefinery

Lignin plays a vital role in the economics of biorefineries, serving as a source of process energy and a feedstock for sustainable fuels and chemical production. While understanding lignin’s chemical composition is crucial, emerging evidence suggests that a more comprehensive understanding of its macromolecular structure is critical to explaining its complex behavior in the biorefinery. This study investigated the partial collapse of the lignin network in corn stover feedstock after harvest and storage as a result of the microbial digestion of hemicellulose. Fluorescence microscopy was used to detect the collapse of lignin in terms of lignin’s inter-molecular interaction and the re-orientation of lignin’s chromophores, by the changes in lignin’s fluorescence lifetime, anisotropy, and the number of effective emitters. With minimal sample perturbation, our in-situ microscopic results revealed lignin's coil-globule transition phenomena, which was only previously predicted by molecular dynamics modeling extracted lignin in solvent. This collapse of lignin macromolecular structure was confirmed by results from NMR, IR, Raman, and powder X-ray diffraction. We also investigated the impact of this storage-induced collapse on the downstream biorefinery processes. Our study revealed that the two major approaches for lignin valorization in the lignin-first biorefinery model, namely monomer extraction and milled wood lignin extraction, were negatively impacted by the lignin collapse. As changes during storage are a source of feedstock variability, our study highlights the importance of understanding the effect of feedstock handling on biorefinery operations and economics.

09 BIOMASS FUELS↗
DOE OSTI2025

Inkless, dry printing nanographene via in-Situ Coordinated laser ablation and sintering processes

Printing carbon, such as graphene and other carbon structures, for flexible and printed electronics currently relies on either ink-based printing, laser-induced forward transfer (LIFT), or laser-induced graphitization (LIG) to convert carbon-rich precursor materials, such as polymers, to graphene-like carbon structures. Liquid inks contain toxic solvents, surfactants, and stabilizing additives that degrade electrical conductivity and require high-temperature post-processing. On the other hand, LIG is limited by the substrate. Here, this study introduces an additive manufacturing method for dry-printing carbon nanomaterials, ranging from amorphous carbon to crystalline graphene-like structures, on various substrates. The system utilizes laser ablation of a solid graphite target to create pure carbon nanoparticles in situ and on demand. An inert gas carries the nanoparticles onto the substrate, where they can be deposited either as amorphous structures or laser-sintered in real time to form various graphitic structures. The study of laser processing parameters, specifically fluence and pulse repetition frequency, revealed three unique regimes of nanostructure evolution that influence the morphological and electrical properties of these printed structures. Raman spectroscopy confirmed graphitization with a resistivity slightly higher than that of the bulk graphite target. The conductivity/resistivity could be tuned as a function of sintering laser power. Scanning transmission electron microscopy (STEM) revealed that turbostratic nanographene formed with an interlayer spacing of 0.40 nm. Despite ink-based printing methods, such as screen printing, inkjet printing (IJP), and aerosol jet printing (AJP), this eco-friendly and green manufacturing technique could eliminate toxic chemicals, reduce environmental impact, and enable single-step fabrication of carbon-based devices for applications in wearable sensors, energy storage, flexible electronics, and Internet of Things (IoT) devices.

Additive nanomanufacturing↗