Search NASA⌕ Search

SEARCH · Search NASA

Results for “Initial state”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2018

Two key features influencing community assembly processes at regional scale: Initial state and degree of change in environmental conditions

Belowground microbial communities strongly influence ecosystem function such that predicting function may rely on understanding ecological processes that assemble communities. Uncertainty remains, however, in what governs the relative contributions of different ecological processes. To help fill this knowledge gap we test the general hypothesis that both initial state and degree of change in environmental conditions govern the relative contributions of different ecological assembly processes. To do so we leveraged regional-scale nutrient and organic matter addition experiments and used soil organic matter (SOM) as a proxy of integrated soil environmental conditions. Consistent with our hypothesis, we found that both the initial amount of SOM and the degree of change in SOM—in response to nutrient addition—influenced the relative contributions of different ecological assembly processes. These influences were most clearly observed at the regional scale, suggesting potential scale dependence. More specifically, nutrient additions homogenized bacterial community composition due to enhanced influences of homogenizing dispersal when SOM content was initially high. In contrast, nutrient additions led to divergence in community composition due to variable selection when initial SOM was low and/or when SOM increased significantly in response to nutrient additions. Our findings indicate important connections among initial conditions, degree of change in environmental variables, and microbial community assembly processes that may influence ecosystem processes. These conceptual inferences highlight a need to strengthen connections between ecological theory and biogeochemical modeling.

Feng, Youzhi↗
DOE OSTI2021

Quantum optimal control for pure-state preparation using one initial state

This paper presents a framework for solving the pure-state preparation problem using numerical optimal control. As an example, we consider the case where a number of qubits are dispersively coupled to a readout cavity. Herein, we model open system quantum dynamics using the Markovian Lindblad master equation driven by external control pulses. The main result of this paper develops a basis of density matrices (a parameterization) where each basis element is a density matrix by itself. Utilizing a specific objective function, we show how an ensemble of the basis elements can be used as a single initial state throughout the optimization process—independent of the system dimension. We apply the general framework to the specific application of ground-state reset of one and two qubits coupled to a readout cavity.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2021

Learning electric vehicle driver range anxiety with an initial state of charge-oriented gradient boosting approach

This manuscript focuses on the modeling of electric vehicle (EV) driver’s range anxiety, a fear that a vehicle does not have sufficient range, or state of charge (SOC) of the battery pack, to reach its destination and would strand its occupants. Despite numerous research studies on the modeling of charging behaviors, modeling efforts to understand at what battery percentages do EV drivers charge their vehicles, and what are the associated contributing factors, are rather limited. To this end, an ensemble learning model based on gradient boosting is developed. The model sequentially fits new predictors to new residuals of the previous prediction and, then, minimizes the loss when adding the latest prediction. A total of 18 features are defined and extracted from the multisource data, which cover information on driver, vehicles, stations, traffic conditions, as well as spatial-temporal context information of the charging events. The analyzed dataset includes 4.5-year’s charging event log data from 3,096 users and 468 public charging stations in Kansas City Missouri, and the macroscopic travel demand model maintained by the metropolitan planning organization. Here, the result shows the proposed model achieved a satisfactory result with a R square value of 0.54 and root mean square error of 0.14, both better than multiple linear regression model and random forest model. To reduce range anxiety, it is suggested that the priorities of deploying new charging facilities should be given to the areas with higher daily traffic prediction, with more conservative EV users or that are further from residential areas.

33 ADVANCED PROPULSION SYSTEMS↗
DOE OSTI2026

Generating entangled steady states in multistable open quantum systems via initial state control

Entanglement underpins the power of quantum technologies, yet it is fragile and typically destroyed by dissipation. Paradoxically, the same dissipation, when carefully engineered, can drive a system toward robust entangled steady states. However, this engineering task is nontrivial, as dissipative many-body systems are complex, particularly when they support multiple steady states. Here, we derive analytic expressions that predict how the steady state of a system evolving under a Lindblad equation depends on the initial state, without requiring integration of the dynamics. These results extend Refs. [V. V. Albert and L. Jiang, Phys. Rev. A 89, 022118 (2014); V. V. Albert et al., Phys. Rev. X 6, 041031 (2016)], showing that while the steady-state manifold is determined by the Liouvillian kernel, the weights within it depend on both the Liouvillian and the initial state. We identify a special class of Liouvillians for which the steady state depends only on the initial overlap with the kernel. Our framework provides analytical insight and a computationally efficient tool for predicting steady states in open quantum systems. As an application, we propose schemes to generate metrologically useful entangled steady states in spin ensembles via balanced collective decay.

Dissipative dynamics↗
DOE OSTI2020

Observable signatures of initial state momentum anisotropies in nuclear collisions

In this work, we show that the correlation between the elliptic momentum anisotropy v 2 and the average transverse momentum [ p T ] at fixed multiplicity in small system nuclear collisions carries information on the origin of the observed momentum anisotropy. A calculation using a hybrid IP-Glasma+ music +UrQMD model that includes contributions from final state response to the initial geometry as well as initial state momentum anisotropies of the color glass condensate predicts a characteristic sign change of the correlator ρ ^ ( v 2 2 , [ p T ] ) as a function of charged particle multiplicity in p + Au and d + Au collisions at s = 200 GeV , and p + Pb collisions at s = 5.02 TeV . This sign change is absent in calculations without initial state momentum anisotropies. The model further predicts a qualitative difference between the centrality dependence of ρ ^ ( v 2 2 , [ p T ] ) in Au + Au collisions at s = 200 GeV and Pb + Pb collisions at s = 5.02 TeV , with only the latter showing a sign change in peripheral events. Predictions for O + O collisions at different collision energy show a similar behavior. Experimental observation of these distinct qualitative features of ρ ^ ( v 2 2 , [ p T ] ) in small and large systems would constitute strong evidence for the presence and importance of initial state momentum anisotropies predicted by the color glass condensate effective theory.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2022

An improved method to access initial states in relativistic heavy-ion collisions

Abstract Observables in heavy-ion collisions are generally categorized into centralities, which reflect an average over events within a range of impact parameters including a wide variety of initial-state configurations. A multiple binning method using spectator neutrons within each centrality has been shown to provide access to events with rare initial-state conditions. This work suggests an improvement in quantifying the difference between standard centrality and spectator neutron binning towards accessing the initial-state properties. A selection of events with higher initial-state density at a fixed participating nucleon number was observed to result in larger final-state particle production and smaller elliptic flow. The relative difference between observables in centrality and spectator binning shows reduced sensitivity for the observables dominated by impact parameter fluctuations in the initial state, such as triangular flow. This property renders the spectator binning method a good candidate for separating geometric contributions from random fluctuations in the initial state towards final-state observables.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2019

Role of initial-state electron correlation in one-photon double ionization of atoms and molecules

By decomposing the initial-state wave function into its unique natural orbital expansion, as defined in the 1950s by Löwdin and used in modern studies of entanglement, we analyze the role of electron correlation in the initial state of an atom or molecule in determining the angular distribution of one-photon double ionization. Final-state correlation of the two ejected electrons is treated completely in numerically accurate calculations as the initial states of He, H - , and H 2 are built up from correlating configurations in strict order of decreasing natural orbital occupations. Additionally, in the two-electron atoms it is found that the initial-state correlation plays a sometimes modest but generally measurable role. In striking contrast, for H 2 a large number of correlating configurations in the ground state is often necessary to produce angular distributions even approximately resembling the correct ones. Finally, one-photon double photoionization of oriented H 2 is found to be particularly sensitive to left-right correlation along the bond.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2022

Rapidity dependence of initial state geometry and momentum correlations in p + Pb collisions

Event geometry and initial state correlations have been invoked as possible explanations of long range azimuthal correlations observed in high multiplicity p+p and p+Pb collisions. We study the rapidity dependence of initial state momentum correlations and event-by-event geometry in √s = 5.02 TeV p+Pb collisions within the 3+1D IP-Glasma model [1], where the longitudinal structure is governed by JIMWLK rapidity evolution of the incoming nuclear gluon distributions. Furthermore, we find that the event geometry is correlated across large rapidity intervals whereas initial state momentum correlations are relatively short range in rapidity. Based on our results, we discuss implications for the relevance of both effects in explaining the origin of collective phenomena in small systems.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2025

Rapid Initial-State Preparation for the Quantum Simulation of Strongly Correlated Molecules

Studies on quantum algorithms for ground-state energy estimation often assume perfect ground-state preparation; however, in reality the initial state will have imperfect overlap with the true ground state. Here, we address that problem in two ways: by faster preparation of matrix-product-state (MPS) approximations and by more efficient filtering of the prepared state to find the ground-state energy. We show how to achieve unitary synthesis with a Toffoli complexity about 7 × lower than that in prior work and use that to derive a more efficient MPS-preparation method. For filtering, we present two different approaches: sampling and binary search. For both, we use the theory of window functions to avoid large phase errors and minimize the complexity. We find that the binary-search approach provides better scaling with the overlap at the cost of a larger constant factor, such that it will be preferred for overlaps less than about 0.003 . Finally, we estimate the total resources to perform ground-state energy estimation of Fe - S cluster systems, including the Fe Mo cofactor by estimating the overlap of different MPS initial states with potential ground states of the Fe Mo cofactor using an extrapolation procedure. With a modest MPS bond dimension of 4000 , our procedure produces an estimate of approximately 0.9 overlap squared with a candidate ground state of the Fe Mo cofactor, producing a total resource estimate of 7.3 × 10 10 Toffoli gates; neglecting the search over candidates and assuming the accuracy of the extrapolation, this validates prior estimates that have used perfect ground-state overlap. This presents an example of a practical path to prepare states of high overlap in a challenging-to-compute chemical system. Published by the American Physical Society 2025

Berry, Dominic W. (ORCID:0000000334461449)↗
DOE OSTI2021

Predicting Cement-Sheath Integrity with Consideration of Initial State of Stress and Thermoporoelastic Effects

In conventional wellbore-integrity analysis, the cement sheath’s initial state of stress and transient thermoporoelastic effects are often neglected. However, the initial state of stress is prerequisite information for accurately predicting the safe operating conditions that prevent a cemented well from being damaged. In addition, transient thermoporoelastic effects can have a profound effect on when damage will occur. Here in this paper, we propose a model that includes these effects to predict the safe operating pressures and temperatures that will prevent cement-sheath failure. For the initial state of stress, we proposed an empirical model using measurements. Subsequent stress changes are evaluated by a fully coupled transient thermoporoelastic model to analyze the mechanical behavior of the cement sheath. We predict the safe operating envelope (SOE) for shear, tensile, and debonding cement-sheath failures caused by pressure and temperature perturbations after the cement sets. Our model predicts that pore pressure is a key factor for cement failure, especially for rapid temperature changes. If the formation is low permeability, the transient pore pressures are amplified, causing the risk of damage to increase. Compared with conventional thermoelastic models, the thermoporoelastic model predicts a smaller SOE when heating the internal casing fluid and a larger envelope when cooling the internal casing fluid. Finally, the heating rate was considered with respect to field applications. The heating rate was also considered, and slower heating/cooling rates can prevent damage to the cement sheath. Finally, the thermoporoelastic model was applied to explain several laboratory and field experiments and achieved good matches.

02 PETROLEUM↗
DOE OSTI2018

Dynamical initial-state model for relativistic heavy-ion collisions

We present a fully three-dimensional model providing initial conditions for energy and net-baryon density distributions in heavy ion collisions at arbitrary collision energy. The model includes the dynamical deceleration of participating nucleons or valence quarks, depending on the implementation. The duration of the deceleration continues until the string spanned between colliding participants is assumed to thermalize, which is either after a fixed proper time, or a uctuating time depending on sampled final rapidities. Energy is deposited in space-time along the string, which in general will span a range of space-time rapidities and proper times. We study various observables obtained directly from the initial state model, including net-baryon rapidity distributions, 2-particle rapidity correlations, as well as the rapidity decorrelation of the transverse geometry. Their dependence on the model implementation and parameter values is investigated. Here, we also present the implementation of the model with 3+1 dimensional hydrodynamics, which involves the addition of source terms that deposit energy and net-baryon densities produced by the initial state model at proper times greater than the initial time for the hydrodynamic simulation.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2018

Structural Transition and Antibody Binding of EBOV GP and ZIKV E Proteins from Pre-Fusion to Fusion-Initiation State

Membrane fusion proteins are responsible for viral entry into host cells—a crucial first step in viral infection. Additonally, these proteins undergo large conformational changes from pre-fusion to fusion-initiation structures, and, despite differences in viral genomes and disease etiology, many fusion proteins are arranged as trimers. Structural information for both pre-fusion and fusion-initiation states is critical for understanding virus neutralization by the host immune system. In the case of Ebola virus glycoprotein (EBOV GP) and Zika virus envelope protein (ZIKV E), pre-fusion state structures have been identified experimentally, but only partial structures of fusion-initiation states have been described. While the fusion-initiation structure is in an energetically unfavorable state that is difficult to solve experimentally, the existing structural information combined with computational approaches enabled the modeling of fusion-initiation state structures of both proteins. In conclusion, these structural models provide an improved understanding of four different neutralizing antibodies in the prevention of viral host entry.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2026

Scan‐Path‐ and Initial‐State‐Dependent Superdomain Switching in (111)‐Oriented PZT

Polarization switching in ferroelectric materials arises from the collective evolution of complex domain hierarchies, yet deterministic control over these processes remains challenging. Here, we investigate scan-path- and initial-state-dependent switching in epitaxial (111)-oriented PbZr 0.2 Ti 0.8 O 3 thin films using automated AFM-based writing combined with quantitative 3D piezoresponse force microscopy. We show that the scan trajectory acts as an experimentally accessible control parameter for superdomain formation. Box-in-box raster scans reproducibly stabilize ordered stripe superdomains with a reduced subset of symmetry-allowed variants, whereas spiral trajectories generate frustrated mixed-variant states with a broader distribution of final microstructures. Automated pulsing experiments further show that the local superdomain configuration at the nucleation site strongly influences the final written morphology. Phase-field modeling qualitatively reproduces the contrast between representative initial-state geometries and supports the role of compatibility constraints among competing ferroelastic pathways. These findings establish scan-path and initial-state engineering as practical handles to program ferroic order in hierarchical ferroelectric domain structures.

Vasudevan, Rama K. [Oak Ridge National Laboratory ↗
DOE OSTI2018

Monte Carlo Study of the Effect of Initial States and Structural Defects on Nonequilibrium Critical Behavior of the Three-Dimensional Ising Model

The effect of various initial magnetizations m{sub 0} and structural defects the nonequilibrium critical behavior of the three-dimensional Ising model is numerically studied. Based on an analysis of the time dependence of the magnetization and the two-time dependence of the autocorrelation function and dynamic susceptibility, the significant effect of initial states on relaxation magnetizations and aging effects characterized by anomalous relaxation inhibition and correlation in the system with increasing waiting time was revealed. The fluctuation–dissipation theorem violation was studied, and the values of the limit fluctuation–dissipation ratio (FDR) are calculated. It is shown that two universality subclasses can be distinguished in the nonequilibrium critical behavior of the three-dimensional Ising model with random initial magnetization m{sub 0} These subclasses correspond to the system evolution from the high-temperature (m{sub 0} = 0) and low-temperature (m{sub 0} = 1) initial states with limit FDRs characteristic of these states.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2017

Analysis of the Effect of Different Initial States and Structural Defects on the Characteristics of the Nonequilibrium Critical Behavior of the 3D Ising Model

The effect of different initial values m{sub 0} of magnetization and structural defects on the nonequilibrium critical behavior of the 3D Ising model have been analyzed numerically using the Monte Carlo method. Analysis of the two-time dependences of the autocorrelation function and dynamic susceptibility has revealed a substantial influence of the initial states on the aging effects that are characterized by anomalous retardation of relaxation and correlation in the system upon an increase in the waiting time. We have studied the violations of the fluctuation–dissipation theorem and calculated the limiting fluctuation–dissipation ratio. It is shown that in the nonequilibrium critical behavior of the 3D Ising model, two universality subclasses corresponding to the evolution of the system from the high-temperature (with m{sub 0} = 0) and low-temperature (with m{sub 0} = 1) initial states with the values of the limiting fluctuation–dissipation ratio typical of these states can be singled out.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2025

Statistical analysis of the fluctuations of an initial-state model with independently distributed hot spots

Abstract We determine the uncorrelated modes that characterize the fluctuations in a semi-realistic model for the initial state of high-energy nuclear collisions, consisting of hot spots whose positions are distributed independently. Varying the number of hot spots, their size, and the weights with which they contribute to the initial state, we find that the parameter that has the largest influence on the relative importance of the fluctuation modes is the source size, with more extended hot spots leading to a more marked predominance of the principal modes.

Borghini, Nicolas↗
DOE OSTI2022

Initial state QED radiation aspects for future $e^+e^-$ colliders

This white paper concerns theoretical and phenomenological aspects relevant to the physics of future $e^+e^-$ colliders, in particular regarding initial-state QED radiation. The contributions each contain key technical aspects, and are formulated in a pedagogical manner so as to render them accessible also to those who are not directly working on these and immediately-related topics. This should help both experts and non-experts understand the theoretical challenges that we shall face at future $e^+e^-$ colliders. Specifically, this paper contains descriptions of the treatment of initial state radiation from several Monte Carlo collaborations, as well as contributions that explain a number of more theoretical developments with promise of future phenomenological impact.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2022

Quantifying the impact of temporal analysis of products reactor initial state uncertainties on kinetic parameters

The temporal analysis of products (TAP) reactor, a transient kinetic tool, provides users with information as the catalyst state evolves. However, the state of the art for TAP uncertainty quantification only considers the experimental noise present in the outlet flow signal. Additional sources of uncertainty, including, but not limited to, initial surface coverages, the catalyst zone location, the inert void fraction, and the gas pulse intensity and pulse delay, are not included. For this reason, a framework for quantifying all uncertainty sources present in TAP experiments is presented and applied to a carbon monoxide oxidation case study. Herein, two methods for quantifying these sources of uncertainty are introduced. The first utilizes initial state sensitivities to approximate the parameter variances, as well as to provide insights into the structural certainty of the model. The second generates parameter confidence distributions through an ensemble-based sampling algorithm. This initial state covariance matrix can ultimately be merged with the experimental noise covariance matrix, providing a unified description of the parameter uncertainties for a single TAP experiment.

36 MATERIALS SCIENCE↗