Institutional heat wave analysis by building energy modeling fleet and meter data
Not Available
32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
SEARCH · Search NASA
Results for “Institutional analyses”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Three-Dimensional Electromagnetic and Structural Analysis of Disruptions in the COMPASS Upgrade Vacuum Vessel
Structural analyses of disruptions and the electromagnetic (EM) analyses to support them typically use symmetry to produce a manageable model size. Nonaxisymmetric halo loads require larger analysis models. Here, in this paper, the results of transient EM analyses of halo strikes during a vertical displacement event are presented. The plasma motions and halo characteristics are prescribed based on analyses performed by the Institute of Plasma Physics of the Czech Republic. The time transient EM solution provides loads to a full three-dimensional transient dynamic analysis of the vacuum vessel. The responses to large lateral halo loads are altered and mitigated by the mode responses of the vessel. Dynamic load factors are computed for specific locations in the vessel and supports.
70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
Considerations for Regulation and Practical Implementation of Analyses of Inadvertent Human Intrusion - 20169
Recommendations from the International Commission for Radiological Protection (ICRP) and the International Atomic Energy Agency (IAEA) identify the need to consider potential inadvertent human intrusion into a near-surface radioactive waste disposal facility when developing limits for radionuclide concentrations that can be disposed. The recommendations also provide perspective on expectations for performance criteria and general assumptions for such analyses. Inadvertent human intrusion analyses are conducted to address the potential failure of institutional controls and loss of memory of a disposal facility. The analyses consider potential consequences of human actions that result in unknowingly bringing waste to the surface. Inadvertent human intrusion scenarios consider potential impacts to someone involved in an activity that actually disturbs the waste (e.g., drilling or excavation of a basement) or that exposes the person to emanations from the waste (e.g., radioactive gases) and also for the case where there may be longer term exposures to waste that has been brought to the surface. In practice, inadvertent human intrusion analyses have proven to be a critical consideration for the development of waste classification systems and for the determination of disposal requirements and limitations on wastes that can be disposed at shallow depths. The IAEA implemented a project on Human Intrusion in the context of Disposal of Radioactive waste (HIDRA) to further explore the regulatory expectations and practical implementation of analyses of potential inadvertent human intrusion. The paper begins with a discussion of international recommendations related to consideration of inadvertent human intrusion and then summarizes examples of some topical considerations related to addressing inadvertent human intrusion that are being discussed as part of the second phase of the HIDRA project. The topical considerations are planned to be addressed in a formal IAEA publication. All information in this paper simply reflects on-going project discussions and no formal recommendations are implied for these topical considerations at this time. (authors)
12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
A Review on Protection Challenges on Transmission Lines Connected to Inverter Based Resources
The increased penetration of inverter-based resources (IBRs) connected to transmission grids is challenging how traditional electric power systems operate. Such systems were originally designed based on the dominant presence of synchronous generators. Some main challenges include the increased concerns about system stability due to the reduced system inertia caused by IBRs and the reduced protection reliability caused by the non-deterministic fault current response of IBRs. The protection relays’ algorithms have been designed and validated based on well-known fault current characteristics of synchronous generations, while the short-circuit responses of IBRs heavily depend on their vendor-specific control schemes, which are mainly set to protect inverter semiconductor switches and DC components. The magnitude of short current that IBRs contribute is typically between 1.1–1.5 times the rated current that may behave unstably and incoherently with the voltages. The control scheme of the IBRs also controls the active (P) and reactive (Q) support during system voltage sag and swell conditions. These characteristics challenge not only protective relay schemes but also existing short-circuit software tools to correctly model IBRs for fault studies and protection coordination analyses. Utilities, university researchers, research institutes, and relay manufacturers have performed studies to investigate different aspects of high IBR penetration. Almost all studies support 1) creating international and national standards to regulate the IBRs, 2) revising engineering tools to address shortcomings, and 3) adjusting the protective relay settings to resolve protection problems. This paper summarizes the studies and research conducted in recent years to quantify the impact of IBR penetration on transmission line protection and to identify potential solutions to improve the dependability and reliability of grid protection systems.
14 SOLAR ENERGY↗
Multiview Incomplete Knowledge Graph Integration with application to cross-institutional EHR data harmonization
Objective: The growing availability of electronic health records (EHR) data opens opportunities for integrative analysis of multi-institutional EHR to produce generalizable knowledge. A key barrier to such integrative analyses is the lack of semantic interoperability across different institutions due to coding differences. We propose a Multiview Incomplete Knowledge Graph Integration (MIKGI) algorithm to integrate information from multiple sources with partially overlapping EHR concept codes to enable translations between healthcare systems. Methods: The MIKGI algorithm combines knowledge graph information from (i) embeddings trained from the co-occurrence patterns of medical codes within each EHR system and (ii) semantic embeddings of the textual strings of all medical codes obtained from the Self-Aligning Pretrained BERT (SAPBERT) algorithm. Due to the heterogeneity in the coding across healthcare systems, each EHR source provides partial coverage of the available codes. MIKGI synthesizes the incomplete knowledge graphs derived from these multi-source embeddings by minimizing a spherical loss function that combines the pairwise directional similarities of embeddings computed from all available sources. MIKGI outputs harmonized semantic embedding vectors for all EHR codes, which improves the quality of the embeddings and enables direct assessment of both similarity and relatedness between any pair of codes from multiple healthcare systems. Results: With EHR co-occurrence data from Veteran Affairs (VA) healthcare and Mass General Brigham (MGB), MIKGI algorithm produces high quality embeddings for a variety of downstream tasks including detecting known similar or related entity pairs and mapping VA local codes to the relevant EHR codes used at MGB. Based on the cosine similarity of the MIKGI trained embeddings, the AUC was 0.918 for detecting similar entity pairs and 0.809 for detecting related pairs. For cross-institutional medical code mapping, the top 1 and top 5 accuracy were 91.0% and 97.5% when mapping medication codes at VA to RxNorm medication codes at MGB; 59.1% and 75.8% when mapping VA local laboratory codes to LOINC hierarchy. When trained with 500 labels, the lab code mapping attained top 1 and 5 accuracy at 77.7% and 87.9%. MIKGI also attained best performance in selecting VA local lab codes for desired laboratory tests and COVID-19 related features for COVID EHR studies. Compared to existing methods, MIKGI attained the most robust performance with accuracy the highest or near the highest across all tasks. Conclusions: The proposed MIKGI algorithm can effectively integrate incomplete summary data from biomedical text and EHR data to generate harmonized embeddings for EHR codes for knowledge graph modeling and cross-institutional translation of EHR codes.
Zhou, Doudou↗
Residual symmetries and scalar multiplet vacuum alignment in non-Abelian flavour models
We demonstrate that, upon minimizing a renormalizable, single-scalar potential invariant under a non-Abelian symmetry, special orientations in the associated vacuum alignment of the scalar multiplet correspond to the preservation of a discrete residual flavour symmetry in the broken phase of the theory. Conversely, we show that these special scalar alignments are perturbed when additional Lagrangian operators (e.g. renormalizable, multi-flavon operators and/or effective, higher-dimensional operators) are present that break said residual symmetry, leading to a vacuum reorientation and phenomenological consequences. We therefore construct a one-to-one correspondence principle between broken residual symmetries and vacuum alignment corrections, providing a mechanism to identify (and correct) a subtle but persistent form of phenomenologically relevant fine-tuning embedded in — but often ignored by — most successful non-Abelian flavour models. We first establish this correspondence in a set of toy models based on the S4 permutation symmetry, and then apply the lessons learned to the more realistic A4 Altarelli-Feruglio and ∆(27) Universal Texture Zero models.
72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
Nuclear Data Assessment for Advanced Reactors
Advanced reactor concepts being developed throughout the industry are significantly different from light-water reactor (LWR) designs with respect to geometry, materials, and operating conditions, and consequently, with respect to their reactor physics behavior. Given the limited operating experience with non-LWRs, the accurate simulation of reactor physics and the quantification of associated uncertainties are important for ensuring that the nuclear design for advanced reactor concepts include appropriate margins. Nuclear data are a major source of input uncertainties in reactor physics analysis. As part of a project sponsored by the US Nuclear Regulatory Commission at Oak Ridge National Laboratory (ORNL), key nuclear data relevant to reactor safety analysis in selected advanced reactor technologies were identified, and their impacts on important key figures of merit were assessed based on (1) a review of available advanced reactor specifications, (2) analysis of previous studies performed at ORNL and other research institutions, and (3) sensitivity and uncertainty analyses performed for six selected benchmarks—three experimental and three computational—to quantify the impacts of the identified key nuclear data on several key metrics. This report summarizes the key nuclear data—nominal data and nuclear data uncertainties— considering the most important nuclear reactions in the fuel and in various materials for the moderator, coolant, and structure of the considered advanced reactors.
21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
Investigation of Process Emissions during Thermal Cutting of Clad Metals from the Nuclear Sector - 20183
Typically, reactor pressure vessels as well as steam generators comprising low alloyed steel with a cladding of stainless steel. Recently the permissible values for Cr (VI) in the air of the working areas have been reduced in Germany from 100 μg/m{sup 3} to 1 μg/m{sup 3} air. This results in the danger that even with low-alloy steel with claddings these limit values would be exceeded when using flame cutting technologies. In order to ensure compliance with the permissible limit values, exhaust gas systems with gas cleaning measures are provided. The process emission test shall replace the assumptions required for the design of these systems with measured values. NUKEM Technologies Engineering Services GmbH (NUKEM) has chosen autogenous flame cutting as an example of a thermal cutting system for process emission testing, as there are no proven values in the literature for the Cr (VI) and NiOx emissions produced. The autogenous flame cutting can be used for a variety of cutting tasks within decommissioning projects. In order to simulate the material to be cut, mock ups were generated and cut from information about the material specification for the reactor pressure vessel from existing nuclear power plants including possible claddings. The cutting length needed for analysis in the test will be maximum 100 mm. The airborne emissions from the thermal cutting process will be captured and analyzed as follows: - Dust emission: The generated particles will be collected by a hood equipped with strong suction device and suitable filter elements. The resulting filter is gravimetrically measured before and after the tests. - Particle Size Distribution: The airborne particle size distribution measurement will result in figures for the size and number of particles arising from the thermal cutting process. - Gas Analysis: The gas analysis enables the determination of e.g. CO{sub 2}, CO, O{sub 3}, NO, NO{sub 2}. - Cr (VI) and NiOx Analysis: For the Cr (VI) and NiOx analysis, samples of the filter residue will be taken. As a result Cr (VI) in relation to total Cr as well as the Ni content will be determined by ICP-optically emission spectroscopy and put in relation to the total dust amount. The process emissions test itself as well as the necessary gas analyses and spectroscopic analyses were carried out at the Institute of Materials Science (IW) of Leibniz Universitaet Hannover (LUH). The results of the process emission tests are used to confirm the design of the gas cleaning systems. (authors)
12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
Hydrogen Storage System Cost Analysis (2017-2021) (Final Report)
This final technical report summarizes hydrogen storage system cost analysis results from 2017-2021. Results include onboard hydrogen storage system costs for light-duty vehicles, medium-duty vehicles, heavy-duty vehicles, class 8 long haul trucks, and passenger buses. Multiple storage systems are included, primarily focusing on compressed and cryo-compressed hydrogen in Type 3 and Type 4 storage systems. Additional analysis includes large-scale gaseous and liquid hydrogen storage at refueling stations in tube trailers and Dewars; advanced materials-based storage systems such as metal organic frameworks and metal hydrides; and a baseline setting analysis of compressed natural gas storage systems in support of the Institute for Advanced Composites Manufacturing Initiative (IACMI). Analyses were primarily conducted using a Design for Manufacture and Assembly ® methodology, which is a bottom-up process-based approach to estimating factory costs. Multiple annual production rates are reported to project high-volume costs relevant to mature markets.
08 HYDROGEN↗
Application of Quantum Machine Learning to High Energy Physics Analysis at LHC Using Quantum Computer Simulators and Quantum Computer Hardware
Machine learning enjoys widespread success in High Energy Physics (HEP) analyses at LHC. However the ambitious HL-LHC program will require much more computing resources in the next two decades. Quantum computing may offer speed-up for HEP physics analyses at HL-LHC, and can be a new computational paradigm for big data analyses in High Energy Physics.We have successfully employed three methods (1) Variational Quantum Classifier (VQC) method, (2) Quantum Support Vector Machine Kernel (QSVM-kernel) method and (3) Quantum Neural Network (QNN) method for two LHC flagship analyses: ttH (Higgs production in association with two top quarks) and H->mumu (Higgs decay to two muons, the second generation fermions). We shall address the progressive improvements in performance from method (1) to method (3).We will present our experiences and results of a study on LHC High Energy Physics data analyses with IBM Quantum Simulator and Quantum Hardware (using IBM Qiskit framework), Google Quantum Simulator (using Google Cirq framework), and Amazon Quantum Simulator (using Amazon Braket cloud service). The work is in the context of a Qubit platform (a gate-model quantum computer). Taking into account the present limitation of hardware access, different quantum machine learning methods are studied on simulators and the results are compared with classical machine learning methods (BDT, classical Support Vector Machine and classical Neural Network). Furthermore, we do apply quantum machine learning on IBM quantum hardware to compare performance between quantum simulator and quantum hardware. The work is performed by an international and interdisciplinary collaboration with the Department of Physics and Department of Computer Sciences of University of Wisconsin, CERN Quantum Technology Initiative, IBM Research Zurich, IBM T.J. Watson Research Center, Fermilab Quantum Institute, BNL Computational Science Initiative, State University of New York at Stony Brook, and Quantum Computing and AI Research of Amazon Web Services. This work pioneers a close collaboration of academic institutions with industrial corporations in the High Energy Physics analyses effort. Though the size of event samples in future HL-LHC physics and the limited number of qubits pose some challenges to the Quantum Machine learning studies for High Energy Physics, more advanced quantum computers with larger number of qubits, reduced noise and improved running time (as envisioned by IBM and Google) may outperform classical machine learning in both classification power and in speed.Although the era of efficient quantum computing may still be years away, we have made promising progress and obtained preliminary results in applying quantum machine learning to High Energy Physics. A PROOF OF PRINCIPLE.
46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
pop-cosmos : redshifts and physical properties of KiDS-1000 galaxies
ABSTRACT Principled Bayesian inference of galaxy properties has not previously been performed for wide-area weak-lensing surveys with millions of sources. We address this gap by applying the pop-cosmos generative model to perform spectral energy distribution (SED) fitting for 4 million KiDS (Kilo-Degree Survey)-1000 galaxies. Calibrated on deep COSMOS2020 photometric data, pop-cosmos specifies a physically motivated prior over the galaxy population up to $z \simeq 6$ in stellar population synthesis (SPS) parameter space. Using the Speculator SPS emulator with GPU (graphics processing unit)-accelerated Markov Chain Monte Carlo sampling, we perform full posterior inference at 8.2 GPU seconds per galaxy, obtaining joint constraints on galaxy redshifts and physical properties. We validate photometric redshifts against $\sim \!185\,\!000$ KiDS galaxies cross-matched to Dark Energy Spectroscopic Instrument Data Release 1 spectroscopic samples, achieving low bias ($2\times 10^{-3}$), scatter ($\sigma _{\mathrm{MAD}}=0.03$), and outlier fraction (3.2 per cent) for the Bright Galaxy Survey, with comparable performance (bias $3\times 10^{-2}$, $\sigma _{\mathrm{MAD}}=0.05$, 1.0 per cent outliers) for luminous red galaxies (LRGs). Within the LRG sample, we identify massive, dusty, star-forming contaminants at $z \simeq 0.4$ satisfying standard colour selections for quenched populations. We infer trends in stellar mass, star formation, metallicity, and dust across five tomographic redshift bins consistent with established scaling relations. Using specific star formation rate constraints, we identify $\sim$7 per cent of KiDS-1000 galaxies as quenched, versus 37 per cent implied by conservative colour cuts. This enables the construction of weak-lensing samples defined by physical properties while mitigating intrinsic alignment systematics and preserving statistical power. Our analysis validates pop-cosmos out of sample, establishing it as a scalable approach for galaxy evolution and cosmological analyses with photometric surveys.
Halder, Anik [Institute of Astronomy and Kavli Ins↗
Documenting numerical experiments in support of the Coupled Model Intercomparison Project Phase 6 (CMIP6)
Abstract. Numerical simulation, and in particular simulation of the earth system, relies on contributions from diverse communities, from those who develop models to those involved in devising, executing, and analysing numerical experiments. Often these people work in different institutions and may be working with significant separation in time (particularly analysts, who may be working on data produced years earlier), and they typically communicate via published information (whether journal papers, technical notes, or websites). The complexity of the models, experiments, and methodologies, along with the diversity (and sometimes inexact nature) of information sources, can easily lead to misinterpretation of what was actually intended or done. In this paper we introduce a taxonomy of terms for more clearly defining numerical experiments, put it in the context of previous work on experimental ontologies, and describe how we have used it to document the experiments of the sixth phase for the Coupled Model Intercomparison Project (CMIP6). We describe how, through iteration with a range of CMIP6 stakeholders, we rationalized multiple sources of information and improved the clarity of experimental definitions. We demonstrate how this process has added value to CMIP6 itself by (a) helping those devising experiments to be clear about their goals and their implementation, (b) making it easier for those executing experiments to know what is intended, (c) exposing interrelationships between experiments, and (d) making it clearer for third parties (data users) to understand the CMIP6 experiments. We conclude with some lessons learnt and how these may be applied to future CMIP phases as well as other modelling campaigns.
Pascoe, Charlotte (ORCID:0000000223616778)↗
Joint Sample Analyses of Nuclear Forensic Materials Provided by the Republic of Kazakhstan: U. S. Laboratory Results
This document serves as an interim report to summarize sample analyses performed by Lawrence Livermore National Laboratory (LLNL) and Los Alamos National Laboratory (LANL) on a series of five nuclear forensics samples provided by the Institute of Nuclear Physics (INP) in the Republic of Kazakhstan. The sample set contains four uranium oxide powders and one low-enriched uranium fuel pellet. The samples were provided as part of a broader collaboration that involved a set of joint sample analyses conducted by INP and the US National Laboratories. The joint analyses are being conducted using well-developed analytical plans. These activities are designed to support the advancement of nuclear forensic science and capacity building in all three institutes in both countries. This report builds upon an earlier preliminary summary of the joint interactions and will be augmented by a final report. The final report will summarize the results and value of all sample analyses performed at the three institutes (INP, LLNL, and LANL). The final report will also provide an intercomparison of the results, analytical methods and best practices employed, as well as outline future collaborative nuclear forensics activities that are being developed in the Kazakhstan region.
and nuclear chemistry↗
Phase 1 NuScale SMR FOAK Nuclear Demonstration Readiness Project (Final Scientific/Technical Report)
The overarching objective of the Phase 1 NuScale SMR First-of-a-Kind (FOAK) Nuclear Demonstration Readiness Project was to enhance competitiveness of the U.S. nuclear industry by enabling timely deployment of the NuScale small modular reactor (SMR). The scope of this Phase 1 project continued to advance the licensing and design maturity, particularly in those areas related to supporting customer readiness, supply chain integration, cost competitiveness, and cost confidence. This investment provided by the Government has accelerated development of these designs and technologies so that the existing domestic fleet of nuclear power plants remains viable and the most mature in the nuclear industry. The intent is to have the new, advanced U.S. designs be deployed as early 2026, and be globally competitive. As a part of the First-of-a-Kind Nuclear Demonstration Readiness Project, NuScale has been developing an advanced reactor design, leading the path for other development projects or complex technology advancements for existing plants that have significant technical and licensing risk. The NuScale Power team (NuScale) is advancing licensing, engineering, supply chain development, testing, and other required activities to enhance the innovation and competitiveness of the U.S. nuclear industry by enabling timely deployment of the NuScale SMR. Specifically, NuScale is performing the following activities in Phase 1. Fully supporting the NRC review of the NuScale DCA to ensure approval of a final safety evaluation report by the end of 2020. Improving plant cost confidence and cost competitiveness through design and supply chain advancement, incorporation of constructability best practices, and margin recovery to increase plant power output. Accelerating design maturity, technology development, and operational program readiness to support a customer commitment for plant deployment. The Department of Energy (DOE) Office of Scientific and Technical Information (OSTI), a unit of the Office of Science, fulfills agency-wide responsibilities to collect, preserve, and disseminate both unclassified and classified scientific and technical information (STI) emanating from DOE-funded research and development (R&D) activities at DOE national laboratories and facilities and at universities and other institutions nationwide. This scientific and technical report provides summaries of the analyses and research that was performed by NuScale under this project that achieves the objective of disseminating information to the nuclear industry to ensure the innovations realized are shared for the benefit of the industry at large.
21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
Metagenome-assembled genomes from Slate River floodplain sediments near Crested Butte, CO, USA (June to October 2020)
Microorganisms play a key role in cycling nutrients and contaminants in the terrestrial environment depending on their genetic potential. Here we present metagenome-assembled genomes (MAGs) for the bacterial and archaeal community in floodplain sediment samples taken June to October 2020 at two locations (OBJ1 and OBJ2) near the confluence of the Oh-Be-Joyful Creek and Slate River. The site is one of the field sites in focus for the SLAC National Accelerator Laboratory Groundwater Quality Science Focus Area (SFA) program. Sediment samples from a deep soil pit were collected from 30 cm depth below surface to just above the cobble layer (~190-250 cm depth) at discrete depths every 40 cm for microbial analyses. A total of 35 metagenomes were sequenced through the Joint Genome Institute (JGI) and can be found under Genomes Online Database (GOLD) sequencing project: Gs0142591. Metagenomes were assembled, binned, and refined using metawrap to generate MAGs (>50% complete and < 10% contamination based on checkM scores). This dataset includes a zip file of 2848 MAG fasta files and a csv file with quality, taxonomic classification (Genome Taxonomy Database Release RS220), and metagenome accessions for MAGs. This dataset also includes a file-level metadata (flmd.csv) file that lists each file contained in the dataset with associated metadata and a data dictionary (dd.csv) file that contains column/row headers used throughout the files along with a definition, units, and data type.Part of this work was performed at SLAC Accelerator Laboratory funded by the US Department of Energy, Office of Science, Biological and Environmental Research under Contract No. DE-AC02-76SF00515.
54 ENVIRONMENTAL SCIENCES↗
Metagenome-assembled genomes from Slate River floodplain sediments near Crested Butte, CO, USA (September 2019)
Microorganisms play a key role in cycling nutrients and contaminants in the terrestrial environment depending on their genetic potential. Here we present metagenome-assembled genomes (MAGs) for the bacterial and archaeal community in floodplain sediment samples taken September 2019 at one locations (OBJ1) near the confluence of the Oh-Be-Joyful Creek and Slate River. The site is one of the field sites in focus for the SLAC National Accelerator Laboratory Groundwater Quality Science Focus Area (SFA) program. Sediment samples from a deep soil pit were collected from 50 to 150 cm depth below surface at discrete depths every 20 cm for microbial analyses. A total of 6 metagenomes were sequenced through the Joint Genome Institute (JGI) and can be found under Genomes Online Database (GOLD) sequencing project: Gs0142591. Metagenomes were assembled, binned, and refined using metawrap to generate MAGs (>50% complete and < 10% contamination based on checkM scores). This dataset includes a zip file of 2562 MAG fasta files and a csv file with quality, taxonomic classification (Genome Taxonomy Database Release RS220), and metagenome accessions for MAGs. This dataset also includes a file-level metadata (flmd.csv) file that lists each file contained in the dataset with associated metadata and a data dictionary (dd.csv) file that contains column/row headers used throughout the files along with a definition, units, and data type.Part of this work was performed at SLAC Accelerator Laboratory funded by the US Department of Energy, Office of Science, Biological and Environmental Research under Contract No. DE-AC02-76SF00515.
54 ENVIRONMENTAL SCIENCES↗
Metagenome-assembled genomes from Slate River floodplain sediments near Crested Butte, CO, USA (June 2018)
Microorganisms play a key role in cycling nutrients and contaminants in the terrestrial environment depending on their genetic potential. Here, we present metagenome-assembled genomes (MAGs) for the bacterial and archaeal community in floodplain sediment samples taken June 2018 at two locations (OBJ1 and OBJ2) near the confluence of the Oh-Be-Joyful Creek and Slate River. The site is one of the field sites in focus for the SLAC National Accelerator Laboratory Groundwater Quality Science Focus Area (SFA) program. Sediment samples from a deep soil pit were collected from 50 to 150 cm depth below surface at discrete depths every 20 cm for microbial analyses. A total of 12 metagenomes were sequenced through the Joint Genome Institute (JGI) and can be found under Genomes Online Database (GOLD) sequencing project: Gs0142591. Metagenomes were assembled, binned, and refined using metawrap to generate MAGs (>50% complete and < 10% contamination based on checkM scores). This dataset includes a zip file of 1233 MAG fasta files and a csv file with quality, taxonomic classification (Genome Taxonomy Database Release RS220), and metagenome accessions for MAGs. This dataset also includes a file-level metadata (flmd.csv) file that lists each file contained in the dataset with associated metadata and a data dictionary (dd.csv) file that contains column/row headers used throughout the files along with a definition, units, and data type.Part of this work was performed at SLAC Accelerator Laboratory funded by the US Department of Energy, Office of Science, Biological and Environmental Research under Contract No. DE-AC02-76SF00515.
54 ENVIRONMENTAL SCIENCES↗
Metagenome-assembled genomes from East River floodplain sediments near Crested Butte, CO, USA (June to September 2019)
Microorganisms play a key role in cycling nutrients and contaminants in the terrestrial environment depending on their genetic potential. Here, we present metagenome-assembled genomes (MAGs) for the bacterial and archaeal community in floodplain sediment samples taken in 2019 in June (flooded conditions) and September (drained conditions) at two locations (MCB1 and MCB3) near the Meander C/Pumphouse floodplain sites of the East River. Sediment cores were collected from 2 depths, a near-surface, generally unsaturated depth (30-40 centimeter (cm) depth below surface) and a deeper depth influenced by flooding with redoximorphic features (70-80 cm depth below surface). Sediments were homogenized from the 10 cm core for microbial analyses. A total of 24 metagenomes were sequenced through the Joint genome institute (JGI) corresponding to 8 samples sequenced in triplicate. These metagenomes can be found under Genomes Online Database (GOLD) sequencing project: Gs0141020. Metagenomes were assembled, binned, and refined using metawrap to generate MAGs (>50% complete and < 10% contamination based on checkM scores). This dataset includes a zip file of 436 MAG fasta files and a csv file with quality, taxonomic classification (Genome Taxonomy Database Release RS220), and metagenome accessions for MAGs. This dataset also includes a file-level metadata (flmd.csv) file that lists each file contained in the dataset with associated metadata and a data dictionary (dd.csv) file that contains column/row headers used throughout the files along with a definition, units, and data type.This work was supported by the Watershed Function Science Focus Area at Lawrence Berkeley National Laboratory funded by the US Department of Energy, Office of Science, Biological and Environmental Research under Contract No. DE-AC02-05CH11231. Part of this work was performed at SLAC Accelerator Laboratory funded by the US Department of Energy, Office of Science, Biological and Environmental Research under Contract No. DE-AC02-76SF00515.
54 ENVIRONMENTAL SCIENCES↗