A porous supramolecular ionic solid
Charge decoration provides a new synthetic strategy to integrate discrete coordination cages into an extended permanently porous material.
Jackson, Nathan↗
SEARCH · Search NASA
Results for “Ionic solids”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
High-Pressure Equation of State for Partially Ionic Solids
Recently, we showed that the cohesive energy of partially ionic solids may be characterized by a two-term energy relationship consisting of a Coulomb term arising from the valence-charge transfer delta Z between the atoms, and a scaled universal energy function E(sup *)(a(sup *)), which accounts for the partially covalent character of the bond and for the repulsion between the atomic cores for small R; a(sup *) is a scaled length. Normalized cohesive-energy curves of alkali halide crystals and of Ti and Ag halide crystals were obtained, and the cohesive-energy-curve parameters were used to generate theoretical equation-of-state (EOS) curves for the Li, Na, K, Cs, and Ag halides. Good agreement was obtained with the experimental isothermal compression curves over a wide pressure range (0-90 kbar). In this paper we verify that the cohesive-energy relationship is valid for divalent partially ionic solids; physically reasonable charge-transfer values (1.80 less than delta Z less than 2.0) are obtained for MgO, CaO, and CaS. Next, EOS curves for LiF, NaF, Nal, CsCl, Csl, MgO, CaO, and CaS are generated in terms of the cohesive-energy parameters. These EOS's yield excellent fits to experimental isothermal-compression data and to shock-wave data to very high pressures (P(sub max)= 250-1350 kbar).
Schlosser, Herbert↗
Neural network potentials with effective charge separation for non-equilibrium dynamics of ionic solids: a ZnO case study
Developing neural network potentials (NNPs) accurate under non-equilibrium dynamics is challenging, as such systems require extensive sampling beyond equilibrium phases. Here we construct high-fidelity NNPs for zinc oxide (ZnO), a polymorphic ionic solid, using density functional theory (DFT) reference data. To efficiently capture transitional configurations, we combine enhanced-sampling molecular dynamics with empirical potentials, data distillation, and pretraining on short-range atomic energies (A-Train), followed by transfer learning with DFT-relabeled datasets. This hierarchical approach improves transferability across polymorphs and stress states. We further introduce effective charge separation, treating long-range Coulombic terms analytically while short-range residual interactions are learned by the NNP. The optimal effective charges fall in the range 0.5–1.0 q e , consistent with dielectric-screened values derived from formal charges but distinct from Bader estimates. Motivated by this observation, we propose a simple data-driven protocol in which effective charges are optimized by comparing DFT reference energies with explicit Coulomb calculations, without additional NNP training. This strategy improves accuracy and transferability in DFT-level predictions of energies, forces, and stress. Together, these results provide a practical charge-selection framework for robust NNP development in ionic solids, enabling reliable simulation of polymorphic phase transformations and non-equilibrium dynamics.
Chemistry↗
Electrical screening procedure for solid ionic conductors
An electrical screening method has been developed for preliminary evaluation of polycrystalline specimens of candidates for use as solid ionic conductive electrolytes in batteries. The procedure measures dielectric loss and capacitance, from which are calculated an ac conductivity attributed provisionally to ions and an activation energy for that conductivity. Electronic conductivity is directly measured. The screening procedure applied to sodium beta-alumina yielded acceptable values for conductivity and activation energy.
Kautz, H. E.↗
Pinning ångström-size solid ionic channels for rare-earth element separation
High-purity rare-earth elements are essential for modern technologies, yet current solvent extraction processes are energy-intensive and environmentally harmful because of inadequate selectivity and ligand toxicity. Although combining size exclusion and binding affinity can improve lanthanide separation, the role of long-range confinement remains underexplored. Here we report lanthanide separation in aqueous systems using extremely confined manganese oxide solid ionic channels with optimized layer spacing. Different lanthanides induce distinct solid-state phase transformations in manganese oxide, creating a strong driving force for separation. Two lanthanide groups, differing by ~1.4 Å in spacing, were identified and confirmed to be stable by density functional theory. The narrower confinement of heavier Group II lanthanides improves cross-group separation by increasing the dehydration barrier for lighter Group I lanthanides without inducing strong binding. Here, we further developed a strategy to pin the confinement dimensions and enhance same-group separation, increasing enrichment factors for La–Nd and La–Pr pairs from 1.6 ± 0.1 and 1.5 ± 0.1 to 5.4 ± 0.1 and 4.2 ± 0.1, respectively.
Chemical engineering↗
High pressure far infrared spectroscopy of ionic solids
A high-pressure far-infrared cell operating at up to truly hydrostatic pressures of 8 kbar is described and used to determine the anharmonic self-energies associated with the transverse optic modes of ionic solids in which q approximately equals zero. The cell allows far-infrared studies in the spectral range below 120 reciprocal cm. The transverse optic modes were investigated to determine their mode Gruneisen constants and the pressure dependence of their inverse lifetimes in RbI, CsI, and TlCl.
Lowndes, R. P.↗
Broadening solid ionic conductor selection for sustainable and earth-abundant solid-state lithium metal batteries
We propose a universal solid electrolyte design that broadens the selection of ceramic LICs for solid-state lithium metal batteries, without requirements of electronic insulation or (electro)chemical stability.
Chemistry↗
Erratum: An Analysis of Solid-State Electrodeposition-Induced Metal Plastic Flow and Predictions of Stress States in Solid Ionic Conductor Defects [J. Electrochem. Soc., 167, 020534 (2020)]
A corrected equation is provided in this free article.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Shock Compression of the Ionic Solid MgF2: Experiments and Simulations
Explore the source record for details and available documents.
Root, Seth↗
Impact of Ionic Liquid on Lithium Ion Battery with a Solid Poly(Ionic Liquid) Pentablock Terpolymer as Electrolyte and Separator
In this work, a ternary blend solid polymer electrolyte (SPE) consisting of a poly(ionic liquid) (PIL) multiblock polymer, lithium salt, and ionic liquid (IL) was investigated with the goal of understanding the influence of IL concentration on ion transport mechanisms and electrochemical stability. The physical, transport, mechanical, morphological, and electrochemical properties of the ternary blend SPE were systematically investigated as a function of IL concentration (r = [IL]/[PIL] mole ratio between 0.1 and 0.7). The results indicate that with increasing IL concentration, the continuous conductive domain increases along with the polymer chain segmental mobility, as well as facilitate ionic conductivity, while the mechanical modulus exhibits a percolation threshold (from 52.17 MPa to 0.55 MPa at r = 0.2 to 0.3). Surprisingly, at higher IL concentrations, there is a reduction in the lithium cation mobility (i.e., 9.3 × 10-12 m2 s-1 versus 3.8 × 10-12 m2 s-1 for r = 0.2 versus r = 0.5, respectively) as evidenced by pulsed-field gradient nuclear magnetic resonance (PFG-NMR), which coincides with an increased overpotential (i.e., 50 mV versus 150 mV for r = 0.2 versus r = 0.5, respectively) evidenced by lithium metal stripping and plating. This work provides valuable insights into the impact of IL on lithium ion conducting PIL block polymers, which may enable the design of new SPEs with both high ionic conductivity and improved stability for the future lithium ion batteries.
Chen, Tzu-Ling↗
Using Holey Graphene for Improved Interfacial Contact in Solid Electrolyte Ionic Conductivity Measurements
Solid-state batteries (SSBs) are poised to become the batteries of the future with advantages such as higher energy density, lighter weight, versatile geometry, and greater safety due to low flammability risk. An important parameter of the solid electrolyte (SE) used is its ionic conductivity. The ionic conductivity is generally calculated from the bulk resistance of a SE pellet, measured from the electrochemical impedance spectroscopy data. The SE pellet is typically prepared from the electrolyte powder by dry compression and is sandwiched between two blocking current collectors to obtain the impedance spectroscopy data. One of the challenges in conducting this measurement is poor interfacial contacts between the SE pellet and the current collector surfaces. Therefore, measurements reported in the literature may underestimate the true ionic conductivity of a given electrolyte. Holey graphene is a carbon nanomaterial with high electrical conductivity and unique dry compressibility, which is unusual for carbon materials but similar to many oxide and sulfide SEs. In this work, it is demonstrated that adding a thin layer of holey graphene between the electrolyte and the stainless steel current collectors significantly improves the interfacial contact. The ionic conductivity values obtained in the effort were sometimes several times higher than the data measured for SEs without the holey graphene layers. This work calls for more standardized measurement procedures to reduce the discrepancies in reported ionic conductivity values.
Solid state battery↗
Ionic conductivity of solid mixtures
Ionic conductivities of solid mixtures of lithium fluoride-lithium chloride, lithium chloride- potassium chloride, lithium fluoride-sodium chloride, and sodium chloride-potassium chloride
Fielder, W. L.↗
Solid State Ionics: Materials Development by Multiscale Modeling and Advanced Manufacturing Techniques
Solid-state ionic materials are an important enabling technology for energy conversion and storage. Solid-state batteries would be a safer and higher energy density alternative to commercially available lithium ion batteries (LIB), however their implementation requires ion conduction in solids at room temperature to occur on the same level as the current generation of liquid electrolytes. Microstructural modifications have been demonstrated to play a major role on ion transport through the control of grain boundary interfaces, which traditionally serve as “blocking” layers. Ultimately, these materials will be fabricated in thin films form as electrolytes in order to minimize ohmic losses in electrochemical devices. This work uses advanced manufacturing techniques in combination with theoretical modeling to implement a science-based approach in the deposition of thin films ion conductors with controlled microstructures used in ceramic energy conversion and storage devices.
25 ENERGY STORAGE↗
Solid-State Ionic Rectification in Perovskite Nanowire Heterostructures
Halide perovskites have attracted increasing research attention with regard to their potential for optoelectronic applications. Because of its low activation energy, ion migration is implicated in the long-term stability and many unusual transport behaviors of halide perovskite devices. However, direct observation and precise control of the ionic transport in halide perovskite crystals remain challenging. Here, we have designed an axial CsPbBr 3 -CsPbCl 3 nanowire heterostructure, in which electric-field-induced halide ion migration was clearly visualized and quantified. We demonstrated that halide ion migration is dependent on the applied electric field and exhibits ionic rectification in this solid-state system, which is due to the nonuniform distribution of the ionic vacancies in the nanowire that results from a competition between electrical screening and their creation/destruction at the electrodes' interfaces. Furthermore, the asymmetric heterostructure characteristics add an additional knob to control the ion movement in the design of advanced ionic circuits with halide perovskites as building blocks.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Solid-state ionics: The key to the discovery and domination of lithium batteries: some learnings from β-alumina and titanium disulfide
We report solid state ionics, the study of fast ion transport in solids, expanded explosively after the discovery of sodium ion transport in b-alumina 50 years ago and has revolutionized energy storage. Lithium ion batteries have come from a dream with titanium disulfide to enabling the communications revolution and are enabling renewable energy. Much can be learnt from these early studies, that will allow the attainment of a fossil-free society and a sustainable environment.
36 MATERIALS SCIENCE↗
Thermoelasticity Model for Lithium Fluoride
Lithium fluoride (LiF) is a typical ionic solid, and at the same time a typical polymorphic (multi-phase) material. Its phase diagram contains two solid phases, B1 (rock salt) and B2 (CsCl), which are typical of ionic solids. The phase diagram of LiF was suggested by Smirnov. We have carried out extensive study of the properties of LiF using one of the most recent versions of VASP (Vienna Ab initio Simulation Package) which allows one to carry out calculations on ionic solids; more detail will be presented elsewhere.
36 MATERIALS SCIENCE↗