Search NASA⌕ Search

SEARCH · Search NASA

Results for “JET MODEL”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1974

Use of cross-correlation measurements to investigate noise generating regions of a real jet engine and a model jet

Cross-correlations are reported of the jet static pressure fluctuations (as measured with a B and K microphone fitted with a nose cone), with the far-field radiated sound pressure. These measurements were made for various probe positions and a large number of far-field positions (at various angles). In addition, the tests were run for a number of different jet exit velocities. The measured, normalized cross-correlation functions vary between 0.004 and 0.155. These values depend upon the angular position of the far-field microphone, the jet exit Mach number, and the position of the probe. In addition, the cross-correlation technique was employed to study the symmetry of the far-field radiated sound about the jet axis. Third-octave analyses of both the probe signal and the far-field radiated sound were made. This is the first time correlation measurements have been made on a jet engine. In addition, a report is given on an extensive noise survey of a model jet. The correlations are related to sound source functions and jet source regions are discussed.

Meecham, W. C.↗
NASA NTRS1983

Modified shielding jet model for twin-jet shielding analysis

An analytical model to estimate the shielding of noise emitted from a point noise source has been developed assuming the shielding jet to be a cylinder of constant radius with uniform flow across the cross section. Comparison to experiment indicated that the model overestimates diffraction of sound around the jet in the far downstream region. The shielding jet model is modified to include widening downstream of the nozzle exit. This not only represents a more realistic model of the jet, but is also expected to improve the shielding estimate downstream. The modified jet model incorporates a Mach number dependent widening rate, a corresponding decrease in flow velocity downstream and an equivalent slug flow evaluation to retain the locally parallel flow approximation of the model development. The shielding analysis with modified jet model is compared to measured data for a subsonic isothermal air jet and a simulated hot subsonic jet. Improvement of the shielding estimate is discussed.

Gerhold, C. H.↗
NASA NTRS1986

On the dust jet model of SS 433

The dust jet model for production of narrow gamma-ray lines from SS 433 is examined and shown to be implausible. Sputtering rates at disk temperatures are high, and self-absorption rates in the disk and jet are important; both imply that dust particles would easily be destroyed. The energy deposited in the dust jet particles by collisions with the ambient protons should be radiated in the optical and infrared in amounts greatly exceeding that observed. The dust momentum pumps ambient gas out of the beam at rates which imply that for the steady state, the ambient gas has to have an initial temperature exceeding one million K. The ambient medium is also required to have densities exceeding those postulated for the H-alpha-emitting gas jet, and the interaction within the gas jet material would result in appreciable broadening of the H-alpha emission lines. At present, there is no viable model for the steady state production of the gamma-ray line radiation.

Helfer, H. L.↗
NASA NTRS1992

Time-dependent inhomogeneous jet models for BL Lac objects

Relativistic beaming can explain many of the observed properties of BL Lac objects (e.g., rapid variability, high polarization, etc.). In particular, the broadband radio through X-ray spectra are well modeled by synchrotron-self Compton emission from an inhomogeneous relativistic jet. We have done a uniform analysis on several BL Lac objects using a simple but plausible inhomogeneous jet model. For all objects, we found that the assumed power-law distribution of the magnetic field and the electron density can be adjusted to match the observed BL Lac spectrum. While such models are typically unconstrained, consideration of spectral variability strongly restricts the allowed parameters, although to date the sampling has generally been too sparse to constrain the current models effectively. We investigate the time evolution of the inhomogeneous jet model for a simple perturbation propagating along the jet. The implications of this time evolution model and its relevance to observed data are discussed.

Marlowe, A. T.↗
NASA NTRS1998

A 3-mode, Variable Velocity Jet Model for HH 34

Variable ejection velocity jet models can qualitatively explain the appearance of successive working surfaces in Herbig-Haro (HH) jets. This paper presents an attempt to explore which features of the HH 34 jet can indeed be reproduced by such a model.

Herbig-Haro objects↗
NASA NTRS1988

Relativistic jet models for the BL Lacertae object Mrk 421 during three epochs of observation

Coordinated observation of the nearby BL Lacertae object Mrk 421 obtained during May 1980, January 1984, and March 1984 are described. These observations give a time-frozen picture of the continuous spectrum of Mrk 421 at X-ray, ultraviolet, optical, and radio wavelengths. The observed spectra have been fitted to an inhomogeneous relativistic jet model. In general, the models reproduce the data well. Many of the observed differences during the three epochs can be attributed to variations in the opening angle of the jet and in the angle that the jet makes to the line of sight. The jet models obtained here are compared with the homogeneous, spherically symmetric, synchrotron self-Compton models for this source. The models are also compared with the relativistic jet models obtained for other active galactic nuclei.

Mufson, S. L.↗
NASA NTRS1986

Application of a relativistic jet model to the study of BL Lacertae objects

The development of a relativistic jet model and its use in fitting coordinated observations of the BL Lacertae objects Mrk 180, Mrk 421, and Mrk 501 are described. This model is a modified version of one by Koenigl (1981). The present model fits show that the properties of the jets in all three objects are similar. The variation in the angle between the jet axis and the observer's line of sight accounts for the differing degrees of variability of the sources. For the case where the jet is seen close to the line of sight (Mrk 421), the Doppler enhanced nonthermal radiation dominates the optical flux. The variation of particle density and magnetic field strength along the jets is similar in all three sources, and suggests that the energy flux is dominated by the magnetic field in the inner regions and by the particle energy at large distances from the jet apex. This result is consistent with models of jets in which the Poynting flux drives particle acceleration at large jet radii.

Hutter, D. J.↗
NASA NTRS1986

Observations of three BL Lacertae objects - Constraints on inhomogeneous relativistically beamed jet models

Multifrequency observations are presented of three BL Lac objects, including the first UV measurements of 0912 + 297 and 1219 + 285. An eight day optical flare was measured from 0422 = 004 in which a doubling in visual flux density was noted; other sources displayed smaller daily fluctuations. The 5-15 GHz radio flux from these three objects remained constant for two months, although the 15-20 GHz emission from 0912 + 297 varied slightly over a period of a month. Constraints which are provided by these and other Bl Lac data are discussed for inhomogeneous relativistically beamed jet models. It is concluded that a tapered jet model is in good agreement with the data for each source and that additional emission regions are not required.

Worrall, D. M.↗
NASA NTRS1990

An evolving relativistic jet model for the BL Lacertae object Markarian 421

Coordinated observations of the nearby BL Lacertae object Mrk 421 obtained during May 1980, January 1984 and March 1984, are described. These observations give a time-frozen picture of the continuous spectrum of Mrk 421 at X-ray, ultraviolet, optical, and radio wavelengths. The observed spectra have been fitted to an inhomogeneous relativistic jet model described by Hutter and Mufson. The studies show that it is difficult to describe the data by a single jet whose properties vary as a function of time in a self-consistent manner unless the flat spectrum, hard X-ray tail present in January 1984 is due to an additional short-lived component of emission. These jet models are compared with homogeneous, spherically symmetric, synchrotron self-Compton models for this source.

Mufson, S. L.↗
NASA NTRS1996

Nonlinear axisymmetric and three-dimensional vorticity dynamics in a swirling jet model

The mechanisms of vorticity concentration, reorientation, and stretching are investigated in a simplified swirling jet model, consisting of a line vortex along the jet axis surrounded by a jet shear layer with both azimuthal and streamwise vorticity. Inviscid three-dimensional vortex dynamics simulations demonstrate the nonlinear interaction and competition between a centrifugal instability and Kelvin-Helmholtz instabilities feeding on both components of the base flow vorticity. Under axisymmetric flow conditions, it is found that the swirl leads to the emergence of counterrotating vortex rings, whose circulation, in the absence of viscosity, can grow without bounds. Scaling laws are provided for the growth of these rings, which trigger a pinch-off mechanism resulting in a strong decrease of the local jet diameter. In the presence of an azimuthal disturbance, the nonlinear evolution of the flow depends strongly on the initial ratio of the azimuthal and axisymmetric perturbation amplitudes. The long term dynamics of the jet can be dominated by counterrotating vortex rings connected by braid vortices, by like-signed rings and streamwise braid vortices, or by wavy streamwise vortices alone.

Martin, J. E.↗
NASA NTRS1979

Fluctuating loads measured on an over-the-wing supersonic jet model

Fluctuating pressure loads on the wing and flap of an over-the-wing supersonic jet model were measured. The model was tested statically and at a Mach number of 0.1 in a small free jet to simulate forward speed. Test parameters were impingement angle, nozzle height, and flap deflection. Load levels as high as 170 db were measured at the center of the impingement region during static tests. Forward speed reduced the loading about 1 db. Load level increased with increasing impingement angle and decreasing nozzle height above the wing. The effect of flap deflection was small. When scaled to full-size aircraft conditions, the maximum amplitude of the one-third-octave fluctuating pressure spectra was about 154 db at about 160 Hz. Maximum load level occurred near the intersection of the nozzle center line with the impinged surface. Downstream of the maximum the fluctuating pressure is inversely proportional to the distance downstream of the nozzle.

Willis, C. M.↗
NASA NTRS1994

Modeling jets in cross flow

Various approaches to the modeling of jets in cross flow are reviewed. These are grouped into four classes, namely: empirical models, integral models, perturbation models, and numerical models. Empirical models depend largely on the correlation of experimental data and are mostly useful for first-order estimates of global properties such as jet trajectory and velocity and temperature decay rates. Integral models are based on some ordinary-differential form of the conservation laws, but require substantial empirical calibration. They allow more details of the flow field to be obtained; simpler versions have to assume similarity of velocity and temperature profiles, but more sophisticated ones can actually calculate these profiles. Perturbation models require little empirical input, but the need for small parameters to ensure convergent expansions limits their application to either the near-field or the far-field. Therefore, they are mostly useful for the study of flow physics. Numerical models are based on conservation laws in partial-differential form. They require little empirical input and have the widest range of applicability. They also require the most computational resources. Although many qualitative and quantitative features of jets in cross flow have been predicted with numerical models, many issues affecting accuracy such as grid resolution and turbulence model are not completely resolved.

Demuren, A. O.↗
NASA NTRS1990

Hollow conical jet models for SS 433 - A paradigm lost?

A precessing jet such as that in SS 433 may be approximated as an axisymmetric flow, if the precession time is short by comparison to the propagation time. A series of simulations has been conducted for precessing jets using an axisymmetric finite-difference hydrodynamics code. Examinations are made of hollow cylindrical jets, which lack the complication of a growing interior volume, and conical jets, which model the behavior of a precessing jet propagating on the surface of its precession cone.

Kochanek, Christopher S.↗
NASA NTRS1996

Aeroelastic Calculations Using CFD for a Typical Business Jet Model

Two time-accurate Computational Fluid Dynamics (CFD) codes were used to compute several flutter points for a typical business jet model. The model consisted of a rigid fuselage with a flexible semispan wing and was tested in the Transonic Dynamics Tunnel at NASA Langley Research Center where experimental flutter data were obtained from M(sub infinity) = 0.628 to M(sub infinity) = 0.888. The computational results were computed using CFD codes based on the inviscid TSD equation (CAP-TSD) and the Euler/Navier-Stokes equations (CFL3D-AE). Comparisons are made between analytical results and with experiment where appropriate. The results presented here show that the Navier-Stokes method is required near the transonic dip due to the strong viscous effects while the TSD and Euler methods used here provide good results at the lower Mach numbers.

Gibbons, Michael D.↗
NASA NTRS1972

Noise field of a supersonic Mach 1.5 cold model jet.

Systematic surveys of both the near and far noise fields were made for a supersonic (nozzle design Mach number 1.5) cold model jet. The purpose of this investigation was to extend the existing understanding of the noise field of a supersonic shock-free jet at a moderate exit Mach number and the variations in its acoustic behavior when the nozzle was operated at its underexpanded mode, where strong shock waves were present. It was found that the broad-band pressure spectra of apparent sources in each of the individual characteristic flow regions were grossly similar. The strongest source for the shock-free jet was located in the region between the laminar core tip and the supersonic core tip, whereas for the underexpanded jet the strongest source was found near the middle of the flow region containing repetitive shock waves. It is shown that the significant increase in the noise output at the underexpanded mode of operation was primarily due to high-frequency components.

Yu, J. C.↗
NASA NTRS1982

Effect of nacelles on aerodynamic characteristics of an executive-jet model with simulated, partial-chord, laminar-flow-control wing glove

Tests were conducted in the Langley High-Speed 7- by 10-Foot Tunnel using a 1/10-scale model of an executive jet to examine the effects of the nacelles on the wing pressures and model longitudinal aerodynamic characteristics. For the present investigation, each wing panel was modified with a simulated, partial-chord, laminar-flow-control glove. Horizontal-tail effects were also briefly examined. The tests covered a range of Mach numbers from 0.40 to 0.82 and lift coefficients from 0.20 to 0.55. Oil-flow photographs of the wing at selected conditions are included.

Campbell, R. L.↗