Search NASA⌕ Search

SEARCH · Search NASA

Results for “Joint distribution”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Wave energy resource characterization employing joint distributions in frequency-direction-time domain

Joint and marginal distributions in the frequency, direction, and time domain are employed to demonstrate their value for wave energy resource characterization when full spectra are available. Insights gained through analysis of these distributions support wave energy converter concept design, operation and maintenance. Spatial trends in the wave energy resource and contributing wave energy systems along the continental shelf of the West Coast of the United States are investigated using the most recent two-dimensional wave spectra measurements at four buoys over an eleven year period (2008 to 2018). Resource hot spots and dominant resolved energy resource bands in the frequency-direction-time domain are delineated. Resource attributes, including frequency and directional spreading, and seasonal variability, are characterized using joint distributions and marginal distributions of wave power spectra. North Pacific westerly swells in the winter season, augmented by Aleutian low-pressure southwesterly swells, are the principal suppliers of the dominant resource and main drivers influencing resource attributes. In conclusion, the modification of these systems southward, especially the North Pacific westerly swells, explains the observed spatial resource trends. The dominant resource wave period shifts two seconds to higher wave periods, thirty degrees in the dominant direction band to a more northward orientation, and forward by one month.

16 TIDAL AND WAVE POWER↗
NASA NTRS1979

IMF orientation, solar wind velocity, and Pc 3-4 signals - A joint distribution

Separate studies using the same micropulsation data base in the period range 10-150 s have shown earlier that signal levels recorded during September, October, and November 1969 at Calgary correlated positively with both solar-wind alignment of the IMF and solar-wind speed, but each correlation contained enough scatter to allow for the influence of the other factor. In this report, joint correlations of velocity and field direction with parameters representing hourly distributions rather than minima of IMF orientation angle display the relative effect of the two agents on magnetic pulsation signal levels. The joint correlations reduce the overall scatter and show that solar-wind speeds above 200-300 km/s and angles between the IMF and the sun-earth line of less than 50-60 deg are associated with enlarged magnetic pulsation amplitudes. These threshold effects tend to support both the bow-shock origin and the Kelvin-Helmholtz amplification of daytime signal transients in the Pc 3, 4 period ranges.

Greenstadt, E. W.↗
DOE OSTI2020

Probabilistic Topography Project Update 5/20 [Slides]

Problem/Goal: Earth System Models (ESMs) do not accurately predict fire spread. There are no effects from topography/vegetation heterogeneity below the model’s scale (100-200km). Use physics based models (FIRETEC and QUICFIRE) to produce an archive of correction factors for SPITFIRE (chosen ESM). This project will: Use datasets to create PDFs of slope & aspect, vegetation distribution; Create joint distribution and sample to make new domain; Run FIRETEC & QUICFIRE on created domain, record output (area burned, intensity, etc.); and Use output to create PDF of correction factors for SPITFIRE runs.

58 GEOSCIENCES↗
NASA NTRS1978

Analysis of vector wind change with respect to time for Cape Kennedy, Florida

Multivariate analysis was used to determine the joint distribution of the four variables represented by the components of the wind vector at an initial time and after a specified elapsed time is hypothesized to be quadravariate normal; the fourteen statistics of this distribution, calculated from 15 years of twice-daily rawinsonde data are presented by monthly reference periods for each month from 0 to 27 km. The hypotheses that the wind component changes with respect to time is univariate normal, that the joint distribution of wind component change with respect to time is univariate normal, that the joint distribution of wind component changes is bivariate normal, and that the modulus of vector wind change is Rayleigh are tested by comparison with observed distributions. Statistics of the conditional bivariate normal distributions of vector wind at a future time given the vector wind at an initial time are derived. Wind changes over time periods from 1 to 5 hours, calculated from Jimsphere data, are presented. Extension of the theoretical prediction (based on rawinsonde data) of wind component change standard deviation to time periods of 1 to 5 hours falls (with a few exceptions) within the 95 percentile confidence band of the population estimate obtained from the Jimsphere sample data. The joint distributions of wind change components, conditional wind components, and 1 km vector wind shear change components are illustrated by probability ellipses at the 95 percentile level.

Adelfang, S. I.↗
NASA NTRS2004

Product Distribution Theory for Control of Multi-Agent Systems

Product Distribution (PD) theory is a new framework for controlling Multi-Agent Systems (MAS's). First we review one motivation of PD theory, as the information-theoretic extension of conventional full-rationality game theory to the case of bounded rational agents. In this extension the equilibrium of the game is the optimizer of a Lagrangian of the (probability distribution of) the joint stare of the agents. Accordingly we can consider a team game in which the shared utility is a performance measure of the behavior of the MAS. For such a scenario the game is at equilibrium - the Lagrangian is optimized - when the joint distribution of the agents optimizes the system's expected performance. One common way to find that equilibrium is to have each agent run a reinforcement learning algorithm. Here we investigate the alternative of exploiting PD theory to run gradient descent on the Lagrangian. We present computer experiments validating some of the predictions of PD theory for how best to do that gradient descent. We also demonstrate how PD theory can improve performance even when we are not allowed to rerun the MAS from different initial conditions, a requirement implicit in some previous work.

Lee, Chia Fan↗
DOE OSTI2020

Development of a Comparison Framework for Evaluating Environmental Contours of Extreme Sea States

Environmental contours of extreme sea states are often utilized for the purposes of reliability-based offshore design. Many methods have been proposed to estimate environmental contours of extreme sea states, including, but not limited to, the traditional inverse first-order reliability method (I-FORM) and subsequent modifications, copula methods, and Monte Carlo methods. These methods differ in terms of both the methodology selected for defining the joint distribution of sea state parameters and in the method used to construct the environmental contour from the joint distribution. It is often difficult to compare the results of proposed methods to determine which method should be used for a particular application or geographical region. The comparison of the predictions from various contour methods at a single site and across many sites is important to making environmental contours of extreme sea states useful in practice. The goal of this paper is to develop a comparison framework for evaluating methods for developing environmental contours of extreme sea states. This paper develops generalized metrics for comparing the performance of contour methods to one another across a collection of study sites, and applies these metrics and methods to develop conclusions about trends in the wave resource across geographic locations, as demonstrated for a pilot dataset. These proposed metrics and methods are intended to judge the environmental contours themselves relative to other contour methods, and are thus agnostic to a specific device, structure, or field of application. The metrics developed and applied in this paper include measures of predictive accuracy, physical validity, and aggregated temporal performance that can be used to both assess contour methods and provide recommendations for the use of certain methods in various geographical regions. The application and aggregation of the metrics proposed in this paper outline a comparison framework for environmental contour methods that can be applied to support design analysis workflows for offshore structures. This comparison framework could be extended in future work to include additional metrics of interest, potentially including those to address issues pertinent to a specific application area or analysis discipline, such as metrics related to structural response across contour methods or additional physics-based metrics based on wave dynamics.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS2001

Satellite Remote Sensing of Tropical Precipitation and Ice Clouds for GCM Verification

This project, supported by the NASA New Investigator Program, has primarily been funding a graduate student, Darren McKague. Since August 1999 Darren has been working part time at Raytheon, while continuing his PhD research. Darren is planning to finish his thesis work in May 2001, thus some of the work described here is ongoing. The proposed research was to use GOES visible and infrared imager data and SSM/I microwave data to obtain joint distributions of cirrus cloud ice mass and precipitation for a study region in the Eastern Tropical Pacific. These joint distributions of cirrus cloud and rainfall were to be compared to those from the CSU general circulation model to evaluate the cloud microphysical amd cumulus parameterizations in the GCM. Existing algorithms were to be used for the retrieval of cloud ice water path from GOES (Minnis) and rainfall from SSM/I (Wilheit). A theoretical study using radiative transfer models and realistic variations in cloud and precipitation profiles was to be used to estimate the retrieval errors. Due to the unavailability of the GOES satellite cloud retrieval algorithm from Dr. Minnis (a co-PI), there was a change in the approach and emphasis of the project. The new approach was to develop a completely new type of remote sensing algorithm - one to directly retrieve joint probability density functions (pdf's) of cloud properties from multi-dimensional histograms of satellite radiances. The usual approach is to retrieve individual pixels of variables (i.e. cloud optical depth), and then aggregate the information. Only statistical information is actually needed, however, and so a more direct method is desirable. We developed forward radiative transfer models for the SSM/I and GOES channels, originally for testing the retrieval algorithms. The visible and near infrared ice scattering information is obtained from geometric ray tracing of fractal ice crystals (Andreas Macke), while the mid-infrared and microwave scattering is computed with Mie scattering. The radiative transfer is performed with the Spherical Harmonic Discrete Ordinate Method (developed by the PI), and infrared molecular absorption is included with the correlated k-distribution method. The SHDOM radiances have been validated by comparison to version 2 of DISORT (the community "standard" discrete-ordinates radiative transfer model), however we use SHDOM since it is computationally more efficient.

Evans, K. Franklin↗
NASA NTRS1994

Comparison of TOPEX/POSEIDON sigma(sub 0) and significant wave height distributions to Geosat

Monthly Ku band sigma(sub 0) and significant wave height (SWH) histograms from the NASA altimeter on the TOPEX/POSEIDON satellite are preseneted for January through June 1993 for three latitude bands between +/- 60 degrees. The data are compared to distributions from the Geosat mission for the same months in 1987-1989. Generally, the distributions agree quite well, although there are some seasonal/hemispherical differences. The sigma(sub 0) comparison reveals an overall bias between the two altimeters with the TOPEX sigma(sub 0) higher by about 0.7 dB, which is consistent with algorithm improvements for TOPEX. The SWH distributions show strong hemispherical/seasonal changes. The seasonal/hemispherical differences between TOPEX and Geosat are consistent for SWH and sigma(sub 0). The joint distribution of sigma(sub 0) and SWH is extremely stable friom month to month. The typical SWH is independent of sigma(sub 0) for sigma(sub 0) greater than 11.3 dB. The minimum SWH grows exponentially with wind speed. This joint distribution may be useful for understanding electromagnetic bias in altimeter measurements. Finally, altimeter data are compared to buoy values from 21 overflights of the NASA verification site near Pt. Conception, California. Wave heights agree well with an root mean square (RMS) difference of only 0.2 m. Altimeter sigma(sub 0) values are compared to buoy wind speeds. The results are consistent with the -0.7 dB sigma(sub 0) offset from the histogram comparisons.

Callahan, Philip S.↗
NASA NTRS1977

Analysis of vector wind change with respect to time for Cape Kennedy, Florida: Wind aloft profile change vs. time, phase 1

Wind vector change with respect to time at Cape Kennedy, Florida, is examined according to the theory of multivariate normality. The joint distribution of the four variables represented by the components of the wind vector at an initial time and after a specified elapsed time is hypothesized to be quadravariate normal; the fourteen statistics of this distribution, calculated from fifteen years of twice daily Rawinsonde data are presented by monthly reference periods for each month from 0 to 27 km. The hypotheses that the wind component changes with respect to time is univariate normal, the joint distribution of wind component changes is bivariate normal, and the modulus of vector wind change is Rayleigh, has been tested by comparison with observed distributions. Statistics of the conditional bivariate normal distributions of vector wind at a future time given the vector wind at an initial time are derived. Wind changes over time periods from one to five hours, calculated from Jimsphere data, are presented.

Adelfang, S. I.↗
DOE OSTI2020

Multi-Mechanism Flood Hazard Assessment: Critical Review of Current Practice and Approaches

This report documents the initial findings from the Nuclear Regulatory commission (NRC)-sponsored research project Methods for Estimating Joint Probabilities of Coincident and Correlated Flooding Mechanisms for Nuclear Power Plant Flood Hazard Assessments.1 This research project is a part of NRC’s Probabilistic Flood Hazard Assessment (PFHA) Research Program and will aid the development of guidance on the use of PFHA methods to evaluate infrastructure safety for existing and proposed US nuclear power plants (NPPs). More specifically, this project intends to provide technical background for the development of flood hazard curves for multi-mechanism floods (MMFs). MMFs are flood events caused by more than one flooding mechanism (e.g., flood events due to the simultaneous occurrence of precipitation-induced river flooding and storm surge). Project activities include three main tasks: Task 1—Survey of current concepts and methods in assessing MMF hazards; Task 2—Critical assessment of selected methods and approaches for quantifying probabilistic MMF hazard risk; Task 3—Development of example case studies to illustrate best practices for quantifying probabilistic MMF hazard risk The initial findings from Tasks 1 and 2 are documented in this report. Task 1 comprised a survey of approaches and methods that have been applied to understand and assess flood hazards due to MMFs. Task 2 involved a critical review of the selected approaches and methods. To that end, the scope of this report includes documentation of (1) a reconnaissance-level survey of the current state of concepts and practice for MMF hazard assessment; (2) a generalized MMF assessment framework to address the distinctions among various types of flood-forcing phenomena, flood mechanisms (grouped into three mechanism types), and flood severity metrics; (3) a wide-ranging survey of approaches and methods that have been applied to various flooding phenomena and settings; and (4) a critical assessment of MMF hazard assessment methods. Studies were identified involving MMFs related to coastal flooding mechanisms, fluvial (rivers/streams) flooding mechanisms, and associated combinations of coastal and fluvial flooding mechanisms. Studies were also identified that address MMFs involving coastal and fluvial flooding mechanisms as well as coastal flooding mechanisms along with extreme precipitation (without specific attribution to fluvial or pluvial mechanisms). The studies identified for review in this report included assessments at varying spatial scales (from local to global) with differing geographic regions of focus using both observed and synthetic data. The majority of studies identified and reviewed were site-specific assessments focusing on relatively short return periods. Studies considered a range of flood severity metrics, made differing assumptions regarding the occurrence of extrema, and used multiple statistical techniques; the use of copulas for the development of joint distributions was a particularly popular analysis technique. The literature review highlighted the differences among existing studies relative to terminology used, means of presenting results, framework and techniques employed, and level of sophistication regarding the number and types of variables considered. Despite the significant diversity in existing studies, the review identified several promising techniques that will be considered in future work under this project, including the development of joint distributions for MMFs using copula and Bayesian-motivated approaches.

98 NUCLEAR DISARMAMENT, SAFEGUARDS, AND PHYSICAL P↗
DOE OSTI2021

Machine Learning Augmented Predictive and Generative Model for Rupture Life in Ferritic and Austenitic Steels

The Larson-Miller parameter (LMP) offers an efficient and fast scheme to estimate the creep rupture life of alloy materials for high temperature applications. However, owing to poor generalizability and dependence on the constant C, which is typically not known a-priori, estimations using the Larson-Miller parameter often result in suboptimal performance for a wide range of materials. At best it is useful in comparing alloys of similar composition. In this work, three machine learning (ML) schemes were developed for rupture life prediction for 9-12% Cr ferritic-martensitic steels and austenitic stainless steels, i.e., a hierarchical model to parameterize LMP using the LMP constant C to compute rupture life, a hierarchical model to parameterize both C and LMP to compute rupture life, and a direct prediction of rupture life. Specifically, we show that the third scheme, using a gradient boosting algorithm, can be used to train ML models for very accurate prediction of rupture life in a variety of alloys (Pear-son Correlation Coefficient > 0.9 for 9-12% Cr and > 0.8 for austenitic stainless steels). In addition, the Shapley value was used to quantify feature importance, making the model interpretable by identifying the effect of various features on the model performance. Furthermore, a variational autoencoder-based generative model was built by conditioning on the experimental dataset to sample hypothetical synthetic candidate alloys from the learnt joint distribution not existing in both 9-12 % Cr ferritic-martensitic steel and austenitic stainless steel datasets. Finally, based on the predictive and generative model, a reinforcement learning strategy has been proposed to guide experimentalists into designing better heat resistant alloys.

Mamun, Md Osman G.↗
DOE OSTI2021

On the Reliability of Parameter Inferences in a Multiscale Model for Transport in Stream Corridors

Nonreacting tracer tests capture information about physical processes in transient storage zones including the hyporheic zone (HZ). However, reliably extracting this information from breakthrough curves (BTCs) and distinguishing the effects of in-channel dispersion and transient storage are well-known challenges. Using BTCs from a nonreacting tracer test monitored at multiple locations, we explore ways for reliable parameter estimations. The identifiability of parameters is greatly influenced by the choice of forward and inverse modeling frameworks in addition to the quality of the data. Our forward model is a recently proposed multiscale model that uses subgrid transport models written in the Lagrangian form to represent transport along a diverse set of HZ pathways with a shape-free distribution of travel times. Joint distributions of HZ and channel parameters are estimated using the Markov Chain Monte Carlo technique. Numerical experiments show ambiguity between channel dispersion and HZ transport when the reach length is too short to allow significant solute-HZ interaction, the observation period is too brief to observe the tailing behavior, or the solute source is spread in time. In contrast, we obtained reliable parameter estimates by simultaneously fitting BTCs observed at different locations in the test reach using a single set of HZ parameters and section-specific channel areas and dispersion coefficients. Furthermore, this study demonstrates the estimation of travel time distributions, HZ exchange rates, and channel parameters in a new multiscale approach and offers guidance for extracting reliable parameter estimates from multiple BTCs.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS1981

Computer simulation of random variables and vectors with arbitrary probability distribution laws

Assume that there is given an arbitrary n-dimensional probability distribution F. A recursive construction is found for a sequence of functions x sub 1 = f sub 1 (U sub 1, ..., U sub n), ..., x sub n = f sub n (U sub 1, ..., U sub n) such that if U sub 1, ..., U sub n are independent random variables having uniform distribution over the open interval (0,1), then the joint distribution of the variables x sub 1, ..., x sub n coincides with the distribution F. Since uniform independent random variables can be well simulated by means of a computer, this result allows one to simulate arbitrary n-random variables if their joint probability distribution is known.

Bogdan, V. M.↗
NASA NTRS1973

The asymptotic distribution of maxima in bivariate samples

The joint distribution (as n tends to infinity) of the maxima of a sample of n independent observations of a bivariate random variable (X,Y) is studied. A method is developed for deriving the asymptotic distribution of the maxima, assuming that X and Y possess asymptotic extreme-value distributions and that the probability element dF(x,y) can be expanded in a canonical series. Applied both to the bivariate normal distribution and to the bivariate gamma and compound correlated bivariate Poisson distributions, the method shows that maxima from all these distributions are asymptotically uncorrelated.

Campbell, J. W.↗
NASA NTRS1992

On probability-possibility transformations

Several probability-possibility transformations are compared in terms of the closeness of preserving second-order properties. The comparison is based on experimental results obtained by computer simulation. Two second-order properties are involved in this study: noninteraction of two distributions and projections of a joint distribution.

Klir, George J.↗