Search NASA⌕ Search

SEARCH · Search NASA

Results for “JuMP model”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Conformational Dynamics of Bacteriochlorophyll c in Chlorosomes from the bchQ Mutant of Chlorobaculum tepidum

In contrast to the common viewpoint that bacteriochlorophyll (BChl) motion is largely absent within the chlorosome assembly, physics-based modeling points to a crucial role of the nanoscale librational motion of the macrocycle for the transfer of excitons. To elucidate this motion experimentally, compositional uniformity and high sensitivity are required. We focused on uniformly 13 C labeled chlorosome preparations from the bchQ mutant Chlorobaculum tepidum with significantly enhanced structural homogeneity. The librational motion is characterized using Rotational Echo DOuble Resonance (REDOR), and in addition, the impact of temperature on specific functionalities within BChl molecules is studied with 1-dimensional and 2-dimensional dipolar and scalar-based MAS NMR measurements. Results show the gradual freezing of the tails and side chains of the BChls with decreasing temperature. However, the librational motion analyzed by measuring the 5C–H dipolar coupling strength obtained from REDOR data sets persists at different temperatures. REDOR simulations show a close match to the experimental dephasing frequency of oscillation for a dipolar coupling strength of 17.5 ± 0.5 kHz which is considerably less than the dipolar coupling strength of 22.7 kHz in the rigid limit. Following a two-site jump model, we arrive at an estimate for BChl libration sampling at an angle of θ = 48 ± 4°, corroborating that the macrocycle indeed experiences significant librational motion on a time scale that is short compared to the NMR measurement time. This finding is in full quantitative support of the dominant rotational motion exhibited by the BChl macrocycle estimated from early MD simulations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Na ion dynamics in P2-Na x [Ni 1/3 Ti 2/3 ]O 2 : a combination of quasi-elastic neutron scattering and first-principles molecular dynamics study

In this work, the P2-type layered material Na 2/3 [Ni 1/3 Ti 2/3 ]O 2 was studied as a promising bi-functional electrode material for sodium-ion batteries. To assess the electrochemical performance of this material, we investigated the diffusion mechanism as well as ionic and electronic conductivity with a combination of experimental and computational techniques. The quasi-elastic neutron scattering (QENS) experiments and first-principles molecular dynamics (FPMD) simulations were performed to identify the diffusion mechanism. The QENS data showed that Na ion diffusion can be well described by the Singwi–Sjölander jump diffusion model, where the obtained mean jump length matched the distances between the neighboring edge-share and face-share Na sites. FPMD predicted diffusivity values similar to those from QENS. The computed composition dependence of ionic and electronic conductivity of Na x [Ni 1/3 Ti 2/3 ]O 2 suggested that electronic conductivity changes significantly when x deviates from 2/3 as the redox couple of Ni and Ti is activated, while the change of ionic conductivity with x is relatively small.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Proton Diffusion in Liquid 1,2,3-Triazole Studied by Incoherent Quasi-Elastic Neutron Scattering

Improving the proton transport in polymer electrolytes impacts the performance of next-generation solid-state batteries. However, little is known about proton conductivity in nonaqueous systems due to the lack of an appropriate level of fundamental understanding. Here, we studied the proton transport in small molecules with dynamic hydrogen bonding, 1,2,3-triazole, as a model system of proton hopping in a nonaqueous environment using incoherent quasi-elastic neutron scattering. By using the jump-diffusion model, we identified the elementary jump-diffusion motion of protons at a much shorter length scale than those by nuclear magnetic resonance and impedance spectroscopy for the estimated long-range diffusion. In addition, a spatially restricted diffusive motion was observed, indicating that proton motion in 1,2,3-triazole is complex with various local correlated dynamics. In conclusion, these correlated dynamics will be important in elucidating the nature of the proton dynamics in nonaqueous systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

tsSLOPE

This project implements the interface that reads a machine learning (ML) model trained in Python to be used in Julia to inform a JuMP optimization model.

Chiang, Nai Yun [Lawrence Livermore National Labor↗
DOE OSTI2023

Applications of the Dulmage–Mendelsohn decomposition for debugging nonlinear optimization problems

Nonlinear modeling and optimization is a valuable tool for aiding decisions by engineering practitioners, but programming an optimization problem based on a complex electrical, mechanical, or chemical process is a time-consuming and error-prone activity. Therefore, there is a need for model analysis and debugging tools that can detect and diagnose modeling errors. One such tool is the Dulmage–Mendelsohn decomposition, which identifies structurally under- and over-determined subsets in systems of equations and variables by partitioning the bipartite graph of the system. This work provides the necessary background to understand the Dulmage–Mendelsohn decomposition and its application to the analysis of nonlinear optimization problems, demonstrates its use in diagnosing a variety of modeling errors, and introduces software implementations for analyzing nonlinear optimization problems in the Pyomo and JuMP algebraic modeling languages.

42 ENGINEERING↗
DOE OSTI2024

Rupture Jumping and Seismic Complexity in Models of Earthquake Cycles for Fault Stepovers with Off-Fault Plasticity

ABSTRACT Fault stepovers are prime examples of geometric complexity in natural fault zones that may affect seismic hazard by determining whether an earthquake rupture continues propagating or abruptly stops. However, the long-term pattern of seismicity near-fault stepovers and underlying mechanisms of rupture jumping in the context of earthquake cycles are rarely studied. Leveraging a hybrid numerical scheme combining the finite element and the spectral boundary integral methods, FEBE, we carry out fully dynamic simulations of sequences of earthquakes and aseismic slip for both compressive and tensile stepovers with off-fault plasticity. We consider a rate-and-state friction law for the fault friction and pressure-sensitive Drucker–Prager plasticity for the off-fault bulk response. We observe that the accumulation of plastic deformation, an indication of off-fault damage, is significantly different in the two cases, with more plastic deformation projected in the overlapping region for the tensile stepover. The seismic pattern for a tensile stepover is more complex than for a compressive stepover, and incorporating plasticity also increases complexity, relative to the elastic case. A tensile stepover with off-fault plasticity shows rupture segmentation, temporal clustering, and frequent rupture jumping from one fault to another. These results shed light on possible mechanisms of rupture jumping in fault stepovers as well as the long-term evolution of the fault zone.

Geochemistry & Geophysics↗
DOE OSTI2021

Computational framework for behind-the-meter DER techno-economic modeling and optimization: REopt Lite

The energy system is undergoing a major transformation with the global emphasis on decarbonization. Distributed generation is projected to play a significant role in the new energy system, and energy models are informing how distributed generation can be integrated reliably and economically. In this work, we present an end-to-end computational framework for distributed energy resource (DER) modeling, REopt Lite™, which captures the interface of technology, economics, and policy in the energy modeling process. We describe the problem space, the building blocks of the model, the scaling capabilities of the design, the optimization formulation, and the extensibility of the model. We present a framework for accelerating the techno-economic analysis of behind-the-meter distributed energy resources to enable rapid planning and decision-making, thereby enabling greater renewable energy deployment. This computation framework is open-sourced to facilitate transparency, flexibility, and wider collaboration opportunities within the worldwide energy modeling community.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2021

Water dynamics in C–S–H and M-S-H cement pastes: A revised jump-diffusion and rotation-diffusion model

The Quasi-Elastic Neutron Scattering (QENS) spectra from four cement pastes are re-analyzed by a new revised jump-diffusion and rotation-diffusion model (rJRM). From the QENS fit, it can be seen that the rJRM is an improved model to fit QENS spectra within the whole detected neutron energy transfer and scattering vector. By the rJRM fitting, the structure parameters extracted from QENS spectra show that both the additives aluminum-silicate nanotubes (ASN) and carboxyl group functionalized ASN (ASN-COOH) can improve magnesium-silicate-hydrate (M-S-H) toward calcium-silicate-hydrate (C–S–H) direction in mechanical properties, but the improvement is weakened with decreasing temperatures. The extracted dynamical parameters show that there is a dynamic anomaly near 230 K in not only translational but also rotational diffusion of water confined in all the investigated samples. In conclusion, the anomaly in rotational diffusion is new compared with those results obtained by the QENS fit using other models.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Understanding the structure and mechanism of Na + diffusion in NASICON solid-state electrolytes and the effect of Sc- and Al/Y-substitution

NASICON (sodium superionic conductor) based ceramics are one of the most promising classes of solid-state electrolytes for all-solid-state batteries. However, the mechanism of sodium ion diffusion is not understood in great detail since there is still a discrepancy between reported average structure models, local structures, and the number and position of sodium sites. To close this gap, we investigate the underlying diffusion mechanism and structural changes governing the Na + transport in Na 3.4 Zr 2 Si 2.4 P 0.6 O 12 using quasielastic neutron scattering (QENS) and powder X-ray diffraction (XRD). In the temperature range from 298 K to 640 K, the correlations between structural changes of a monoclinic C2/c to rhombohedral R $\bar{3}$c phase transition and the result of ion diffusion are investigated. The analysis of the quasielastic neutron scattering data reveals two quasielastic components corresponding to the Chudley-Elliott jump-diffusion model. It clearly shows two different Na + diffusion processes, local and long-range, on two different time and length scales and allows calculations of their corresponding activation energies. Additionally, the effects of Sc 3+ and Al 3+ /Y 3+ aliovalent substitution of Zr 4+ ions on the crystal structure and Na + diffusion are also studied. We can distinguish a local, chain, and cross-chain diffusion mechanism based on correlated QENS and XRD comparison of relevant nearest crystallographic Na–Na distances. The results reveal that the Na + diffusion in these NASICONs is three-dimensional and can provide guidelines on how dopants and changes in the crystal structure can affect the Na + conductivity.

25 ENERGY STORAGE↗
DOE OSTI2025

Temperature sensitivity of the equilibrium neutronics and accident analysis of the HTR-10

Pebble-Bed High-Temperature Gas-cooled Reactors (PB-HTGR) are moderated by the graphite in the fuel pebbles and the graphite reflector surrounding the pebble-bed. Because graphite is by far the most abundant material in PB-HTGRs and the primary moderator, accurate modeling of the graphite material, including density, impurities, and temperatures, is crucial for accurate computational modeling and simulation of these reactors. While main characteristics of the graphite components are often known, the local temperature is less well known and often averaged over all components. Here, this work studies the impact of considering accurate temperature profiles in the graphite material on the generation of a small PB-HTGR model at the state of equilibrium operation and on short-term accident progression. The fuel compositions for the PB-HTGR were determined using a jump-in equilibrium modeling method, the Axial Radial Zone Equilibrium Modeling (AR-ZEM) method. In contrast to previous work, the AR-ZEM method was used considering thermal-hydraulic feedback from the MELCOR code to determine temperatures of the fuel pebbles and the surrounding graphite reflector. The consideration of an axial and radial temperature profile in the core and reflector, as opposed to uniform material temperatures, had an impact of almost 1,300 pcm on the equilibrium core eigenvalue and caused significant differences in the discharged plutonium fuel inventory with up to 4.9% and 11.0% for Pu-239 and Pu-242, respectively. To assess the impact on short-term accident progression, two Anticipated Transient Without SCRAM (ATWS) events, a Pressurized Loss of Forced Coolant (PLOFC) and a Control Rod Withdrawal (CRW) with loss of flow, were simulated with MELCOR. The use of temperature profiles in the equilibrium core models did not reveal a significant impact on the temperature, power, or reactivity responses during the transients. In conclusion, a need for consideration of accurate temperature profiles, in particular for the graphite reflector, was found for the generation of equilibrium PB-HTGRs core models using jump-in methods, but detailed temperature profiles may not be necessary when performing conservative transient analysis.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
DOE OSTI2023

3-D Simulations of earthquakes rupture jumps: 1. Homogeneous pre-stress conditions

SUMMARY Observational and modelling studies indicate that earthquake ruptures can jump between fault sections as large as ∼3 and ∼5 km for compressional and extensional offsets, respectively. Here, we compare characteristics of the rupture jump process on parallel but offset fault sections from traditional 3-D dynamic rupture simulations governed by slip weakening friction using the finite element code, FaultMod, to those from quasi-dynamic simulations governed by rate- and state-dependent friction (rate-state friction) using the code RSQSim. These simulations use spatially uniform initial stresses. For a variety of measures the rupture renucleation position on the offset fault, the rate-state friction and slip weakening friction models produce very similar results. The principal difference is the additional occurrence of delayed rupture jumps that arise from the time- and stress-dependent nucleation that is characteristic of rate-state friction. For immediate rupture jumps, models with slip weakening friction span greater offsets than those with rate-state friction. However the jump distances are nearly identical when delayed rupture jumps are included in the comparisons. We propose that delayed rupture jumps are the likely mechanism for adjacent large-earthquake pairs and clusters. Based on the similarity of renucleation positions with both dynamic and quasi-dynamic models, we conclude that the renucleation positions for rupture initiation on the receiver fault (separated by less than ∼3 km from the source fault) are primarily controlled by static stress changes induced by slip on the initiating fault. However, in light of the slightly greater maximum jump distances (>3 km) seen with the dynamic slip weakening friction model, dynamic stress changes from seismic waves play an increasingly important role as offset distances increase.

, RSQSim↗
DOE OSTI2023

Stochastic Price Generation for Evaluating Wholesale Electricity Market Bidding Strategies

This work presents a novel method for generating electricity price scenarios from statistical properties of past electricity prices using a hybrid statistical and reduced-form stochastic model. Previous work in applying stochastic differential equations (SDE) to model electricity prices has focused on daily average prices. To extend stochastic price generation methods to hourly or sub-hourly pricing, we address several weaknesses in the state-of-the-art: (1) we replace the mean-reversion component of the SDE with an ARIMA process that is better able to characterize the daily and weekly trends; (2) we extend the price-spike, or jump process to account for conditional probabilities of price spikes occurring in consecutive time steps by replacing the traditional Poisson process for modeling jumps with a generalized point process model inspired by brain neuron models; and (3) we replace the traditional method of estimating spike intensity with empirical variance with a Markov process based on observed price spike intensity transitions. The method is demonstrated with electricity prices from the US ERCOT market and a use-case example is provided for bidding an energy storage unit into the day-ahead and real-time energy markets of ERCOT using stochastic optimization methods. Results show that the the synthetic price model out performs a (naive) persistence forecast model by resulting in 24% to 47% more in profits over 168 simulated days.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2025

Optimizing lossy state preparation for quantum sensing using Hamiltonian engineering

One of the most prominent platforms for demonstrating quantum sensing below the standard quantum limit is the spinor Bose–Einstein condensate. While a quantum advantage using several tens of thousands of atoms has been demonstrated in this platform, it faces an important challenge: atom loss. Atom loss is a Markovian error process modeled by Lindblad jump operators, and a no-go theorem, which we also show here, states that the loss of atoms in all spin components reduces the quantum advantage to a constant factor. Here, we show that this no-go theorem can be circumvented if we constrain atom losses to a single spin component. Moreover, we show that in this case, the maximum quantum Fisher information with N atoms scales as N 3/2 , establishing that a scalable quantum advantage can be achieved despite atom loss. Although Lindblad jump operators are generally non-Hermitian and non-invertible, we use their Moore–Penrose inverse to develop a framework for constructing several states with this scaling of Fisher information in the presence of losses. We use Hamiltonian engineering with realistic Hamiltonians to develop experimental protocols for preparing these states. Finally, we discuss possible experimental techniques to constrain the losses to a single spin mode.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2022

Capillary Water in 2-D Drying-Cracking Soil Sub-Grain Models: Morphology and Kinematics of Evaporation and Haines Jumps

Morphing of capillary water during the drying of a cluster of three wet grains is imaged and measured. The uniqueness of the tests is in the grains being long cylinders to make the system as close to a 2-D one as possible. In this way, the Laplace pressure depends on the only one curvature of the meniscus, which can easily be followed and is continuously image processed. The motion of liquid/gas interface, and its rate, as well as of contact angle and perimeter, are also monitored. The drying water body has been known to undergo two modes of re-morphing: a slow, evaporation rate-controlled one and a fast, inertia-driven instabilities of the interfaces. Two particular forms of dynamic re-morphing are being followed: one, called classically an “air entry,” which is a meniscus jump before its approaching the throat between the top and a bottom grain and another jump of the bottom contact, with a splitting of the meniscus into two between only two of the three grains. Associated dynamic variables, capillary pressure, and surface tension forces developing prior to and in conjunction with the instabilities of the menisci are presented in a companion paper by Hueckel et al..

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Bayesian projection pursuit regression

In projection pursuit regression (PPR), a univariate response variable is approximated by the sum of $M$ “ridge functions,” which are flexible functions of one-dimensional projections of a multivariate input variable. Traditionally, optimization routines are used to choose the projection directions and ridge functions via a sequential algorithm, and $M$ is typically chosen via cross-validation. Here, we introduce a novel Bayesian version of PPR, which has the benefit of accurate uncertainty quantification. To infer appropriate projection directions and ridge functions, we apply novel adaptations of methods used for the single ridge function case ($M$=1), called the Bayesian Single Index Model; and use a Reversible Jump Markov chain Monte Carlo algorithm to infer the number of ridge functions $M$. We evaluate the predictive ability of our model in 20 simulated scenarios and for 23 real datasets, in a bake-off against an array of state-of-the-art regression methods. Finally, we generalize this methodology and demonstrate the ability to accurately model multivariate response variables. Its effective performance indicates that Bayesian Projection Pursuit Regression is a valuable addition to the existing regression toolbox.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2020

New self-consistent homogenization for thermo-elastic polycrystals with imperfect interfaces

Here we present a new thermo-elastic self-consistent formulation to calculate the thermo-mechanical response of polycrystalline aggregates with imperfect interfaces. The new model is based on an improved treatment of the effect of imperfect interfaces on the micromechanical response of the grains compared to pre-existing models. New expressions/algorithms are derived for the effective elastic and thermal properties, localization relations, and calculation of intragranular field fluctuations. In addition, derivation of a novel integral equation for the strain field in a heterogeneous elastic medium subjected to arbitrary thermal strain field and displacement jumps is presented. The new model is applied to study the effective thermo-elastic properties and average field fluctuations as a function of the interface properties for imperfectly-bonded triaminotrinitrobenzene (TATB) polycrystalline granular aggregates. The proposed formulation is general in the sense that it can be extended to other material systems and deformation regimes that require a proper consideration of the effect of imperfect interface properties on the material's thermo-mechanical response.

36 MATERIALS SCIENCE↗
DOE OSTI2025

STREAM: A technology planning and capacity expansion model for the industrial sector

The Strategic Technology Roadmapping and Energy, Environmental, and Economic Analysis Model—STREAM—is an optimization-based modeling tool and analysis framework to assist with strategic planning and technology investments of the industrial sector. This open-source framework is written in Julia using the JuMP package, which enables users to model future “pathways” for incumbent and future production technologies, costs, fuels and energy carriers, and energy and non-energy environmental impacts from industries as they transform in pursuit of a robust and competitive manufacturing sector. The model starts with an initial stock of industrial production technologies and assets at a facility level and then determines pathways that minimize cost, subject to an array of possible constraints on demand, market shares, environmental flows, and other exogenously specified operational considerations such as capacity utilization rates or regional energy costs. Key features of the framework include flexibility to model a wide range of industries and industrial technologies/processes at varying levels of granularity, ability to perform parametric sensitivity analyses, and ability to visualize model results using visualization objects.

capacity expansion↗