Search NASA⌕ Search

SEARCH · Search NASA

Results for “K MATRIX”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

N-body U and K matrix program

Computer program was devised to compute free-fall trajectories of satellites, allowing for injection errors and midcourse velocity perturbations. Program consists of trajectory perturbing program and N-body integrating conic program which can also be used as 2-body patch conic program.

Setter, R. N.↗

Thermal Conductivity and Erosion Durability of Composite Two-Phase Air Plasma Sprayed Thermal Barrier Coatings

To enhance efficiency of gas turbines, new thermal barrier coatings (TBCs) must be designed which improve upon the thermal stability limit of 7 wt% yttria stabilized zirconia (7YSZ), approximately 1200 C. This tenant has led to the development of new TBC materials and microstructures capable of improved high temperature performance. This study focused on increasing the erosion durability of cubic zirconia based TBCs, traditionally less durable than the metastable t' zirconia based TBCs. Composite TBC microstructures composed of a low thermal conductivity/high temperature stable cubic Low-k matrix phase and a durable t' Low-k secondary phase were deposited via APS. Monolithic coatings composed of cubic Low-k and t' Low-k were also deposited, in addition to a 7YSZ benchmark. The thermal conductivity and erosion durability were then measured and it was found that both of the Low-k materials have significantly reduced thermal conductivities, with monolithic t' Low-k and cubic Low-k improving upon 7YSZ by approximately 13 and approximately 25%, respectively. The 40 wt% t' Low-k composite (40 wt% t' Low-k - 60 wt% cubic Low-k) showed a approximately 22% reduction in thermal conductivity over 7YSZ, indicating even at high levels, the t' Low-k secondary phase had a minimal impact on thermal in the composite coating. It was observed that a mere 20 wt% t' Low-k phase addition can reduce the erosion of a cubic Low-k matrix phase composite coating by over 37%. Various mixing rules were then investigated to assess this non-linear composite behavior and suggestions were made to further improve erosion durability.

Rare earth zirconia↗

Quasi-Optimal Schwarz Methods for the Conforming Spectral Element Discretization

Fast methods are proposed for solving the system K(sub N)x = b resulting from the discretization of self-adjoint elliptic equations in three dimensional domains by the spectral element method. The domain is decomposed into hexahedral elements, and in each of these elements the discretization space is formed by polynomials of degree N in each variable. Gauss-Lobatto-Legendre (GLL) quadrature rules replace the integrals in the Galerkin formulation. This system is solved by the preconditioned conjugate gradients method. The conforming finite element space on the GLL mesh consisting of piecewise Q(sub 1) elements produces a stiffness matrix K(sub h) that is spectrally equivalent to the spectral element stiffness matrix K(sub N). The action of the inverse of K(sub h) is expensive for large problems, and is therefore replaced by a Schwarz preconditioner B(sub h) of this finite element stiffness matrix. The preconditioned operator then becomes B(sub h)(exp -l)K(sub N). The technical difficulties stem from the nonregularity of the mesh. Tools to estimate the convergence of a large class of new iterative substructuring and overlapping Schwarz preconditioners are developed. This technique also provides a new analysis for an iterative substructuring method proposed by Pavarino and Widlund for the spectral element discretization.

Casarin, Mario↗

A study of pseudoresonances in the application of the Schwinger variational principle to electron scattering from atomic hydrogen

The Schwinger variational principle is applied to s-wave electron-hydrogen atom scattering. Computationally, consistent with a recent paper by Apagyi et al. (1988), there are pseudoresonances at the static exchange level of approximation, but not at the static level. The T-matrix as well as the K-matrix version of the Schwinger principle is used with a real Slater basis, and the same results are obtained in both. The origin of the pseudoresonances from singularities in the separable potential that is effectively employed in the Lippman-Schwinger equation from which the Schwinger variational principle can be derived. The determination of the pseudoresonance parameters from the separable potential is computationally inexpensive and may be used to predict the pseudoresonance parameters for the scattering calculations so as to avoid them.

Weatherford, Charles A.↗

Coherent state constructions of bases for some physically relevant group chains

Rotor coherent state constructions are given for the Wigner supermultiplet SU(4) contains SU(2)xSU(2) and for the special irreducible representations (N0) of the SO(5) contains SO(3) contains SO(2) group chain in exact parallel with the rotor coherent state construction for the SU(3) contains SO(3) contains SO(2) case given by Rowe, LeBlanc,, and Repka. Matrix elements of the coherent state realizations of the group generators are given in all cases by very simple expressions in terms of angular momentum Wigner coefficients involving intrinsic projection labels K. The K-matrix technique of vector coherent state theory is used to effectively elevate these K labels to the status of good quantum numbers. Analytic expressions are given for the (K K*)-matrices for many of the more important irreducible representations.

Hecht, Karl T.↗

REQUEST: A Recursive QUEST Algorithm for Sequential Attitude Determination

In order to find the attitude of a spacecraft with respect to a reference coordinate system, vector measurements are taken. The vectors are pairs of measurements of the same generalized vector, taken in the spacecraft body coordinates, as well as in the reference coordinate system. We are interested in finding the best estimate of the transformation between these coordinate system.s The algorithm called QUEST yields that estimate where attitude is expressed by a quarternion. Quest is an efficient algorithm which provides a least squares fit of the quaternion of rotation to the vector measurements. Quest however, is a single time point (single frame) batch algorithm, thus measurements that were taken at previous time points are discarded. The algorithm presented in this work provides a recursive routine which considers all past measurements. The algorithm is based on on the fact that the, so called, K matrix, one of whose eigenvectors is the sought quaternion, is linerly related to the measured pairs, and on the ability to propagate K. The extraction of the appropriate eigenvector is done according to the classical QUEST algorithm. This stage, however, can be eliminated, and the computation simplified, if a standard eigenvalue-eigenvector solver algorithm is used. The development of the recursive algorithm is presented and illustrated via a numerical example.

Bar-Itzhack, Itzhack Y.↗

Using Dual-wavelength Fiber Bragg Gratings for Temperature and Strain Sensing at Cryogenic Temperature

By using dual-wavelength fiber-optic Bragg gratings, a new technique has been developed for sensing both temperature and strain simultaneously in cryogenic temperature range. Two Bragg gratings with different wavelengths were inscribed at the same location in an optical fiber to form a dual-wavelength sensor. By measuring the wavelength shifts that resulted from the fiber being subjected to different temperatures and strains, the wavelength-dependent thermo-optic coefficients and photoelastic coefficients of the fiber were determined. These coefficients were used to construct the elements of the K matrix, which enables to determine inversely the strain and temperature changes by measuring the wavelength shifts of the dual-wavelength Bragg grating. In this study, measurements were made over the temperature range from room temperature down to about 10 K, addressing much of the low temperature range of cryogenic tanks. A structure transition of the optical fiber during the temperature change was found from about 70 K to 140 K. This transition caused splitting of the waveforms characterizing the Bragg gratings, and the determination of wavelength shifts was consequently complicated. Several alternatives are proposed to resolve this problem. The effectiveness and sensitivities of these measurements in different temperature ranges are discussed. The separation of two wavelengths for the dual-wavelength Bragg grating has been widened to increase the sensitivities of measurement; however, this separation can still be covered in the scanning range from single scanning laser.

Wu, Meng-Chou↗

State estimation Kalman filter using optical processings Noise statistics known

Reference is made to a study by Casasent et al. (1983), which gave a description of a frequency-multiplexed acoustooptic processor and showed how it was capable of performing all the individual operations required in Kalman filtering. The data flow and organization of all required operations however, were not detailed in that study. Consideration is given here to a simpler Kalman filter state estimation problem. Equally spaced time-sampled intervals (k times T sub s, with k the iterative time index) are assumed. It is further assumed that the system noise vector w and the measurement noise vector v are uncorrelated and Gaussian distributed and that the noise statistics (Q and R) and the system model (Phi, Gamma, H) are known. The error covariance matrix P and the extrapolated error covariance matrix M can thus be precomputed and the Kalman gain matrix K sub k can be precomputed and stored for each input time sample.

Jackson, J.↗

Error analysis for semi-analytic displacement derivatives with respect to shape and sizing variables

Sensitivity analysis is fundamental to the solution of structural optimization problems. Consequently, much research has focused on the efficient computation of static displacement derivatives. As originally developed, these methods relied on analytical representations for the derivatives of the structural stiffness matrix (K) with respect to the design variables (b sub i). To extend these methods for use with complex finite element formulations and facilitate their implementation into structural optimization programs using the general finite element method analysis codes, the semi-analytic method was developed. In this method the matrix the derivative of K/the derivative b sub i is approximated by finite difference. Although it is well known that the accuracy of the semi-analytic method is dependent on the finite difference parameter, recent work has suggested that more fundamental inaccuracies exist in the method when used for shape optimization. Another study has argued qualitatively that these errors are related to nonuniform errors in the stiffness matrix derivatives. The accuracy of the semi-analytic method is investigated. A general framework was developed for the error analysis and then it is shown analytically that the errors in the method are entirely accounted for by errors in delta K/delta b sub i. Furthermore, it is demonstrated that acceptable accuracy in the derivatives can be obtained through careful selection of the finite difference parameter.

Fenyes, Peter A.↗

Feature combinations and the Bhattacharyya criterion

A procedure for calculating a kxn rank k matrix B for data compression using the Bhattacharyya bound on the probability of error and an iterative construction using Householder transformation was developed. Two sets of remotely sensed agricultural data are used to demonstrate the application of the procedure. The results of the applications gave some indication of the extent to which the Bhattacharyya bound on the probability of error is affected by such transformations for multivariate normal populations.

Decell, H. P., Jr.↗

On the computation and updating of the modified Cholesky decomposition of a covariance matrix

Methods for obtaining and updating the modified Cholesky decomposition (MCD) for the particular case of a covariance matrix when one is given only the original data are described. These methods are the standard method of forming the covariance matrix K then solving for the MCD, L and D (where K=LDLT); a method based on Householder reflections; and lastly, a method employing the composite-t algorithm. For many cases in the analysis of remotely sensed data, the composite-t method is the superior method despite the fact that it is the slowest one, since (1) the relative amount of time computing MCD's is often quite small, (2) the stability properties of it are the best of the three, and (3) it affords an efficient and numerically stable procedure for updating the MCD. The properties of these methods are discussed and FORTRAN programs implementing these algorithms are listed.

Vanrooy, D. L.↗

Preliminary demonstration of a robust controller design method

Alternative computational procedures for obtaining a feedback control law which yields a control signal based on measurable quantitites are evaluated. The three methods evaluated are: (1) the standard linear quadratic regulator design model; (2) minimization of the norm of the feedback matrix, k via nonlinear programming subject to the constraint that the closed loop eigenvalues be in a specified domain in the complex plane; and (3) maximize the angles between the closed loop eigenvectors in combination with minimizing the norm of K also via the constrained nonlinear programming. The third or robust design method was chosen to yield a closed loop system whose eigenvalues are insensitive to small changes in the A and B matrices. The relationship between orthogonality of closed loop eigenvectors and the sensitivity of closed loop eigenvalues is described. Computer programs are described.

Anderson, L. R.↗

Optimal filtration of the atmospheric parameters profiles

The idea of optimal Marcovian filtration of fluctuating profiles from lidar signals is developed but as applied to a double-frequency sounding which allows the use of large cross sections of elastic scattering and correct separation of the contributions due to aerosol and Rayleigh scatterings from the total lidar return. The filtration efficiency is shown under different conditions of sounding using a computer model. The accuracy of restituted profiles (temperature, pressure, density) is determined by the elements of a posteriori matrix K. The results obtained allow the determination of the lidar power required for providing the necessary accuracy of restitution of the atmospheric parameter profiles at chosen wavelengths of sounding in the ultraviolet and visible range.

Zuev, V. E.↗

Concept of adaptive structures

The concept of adaptive structures is brought up in connection with the need in ultra lightweight structural systems to maintain desired properties and configurations without human intervention when subjected to dynamic, thermal, and other environmental forces. Examples are large antenna structures and flexible robotic structures. In the both cases such adaptivity would allow less massive structural members to be employed under normal loading conditions. During special circumstances when unusually large loads are encountered, temporary stiffening would allow the use of less sturdy structures, resulting in large savings in their cost, and in increasing their mobility and efficiency. Within the framework of a finite-dimensional representation of structural dynamics, the adaptivity can be implemented by the dependence of the stiffness matrix (k) upon the expected load (Q), or expected (programmed) changes in configurations, i.e., (k) = (k(t)) where the dependence upon time is programmed in advance. In order to sustain unexpected loads the adaptive structure can be provided by feedback force control, or by a parametrical stiffness control.

Zak, Michail↗

Application of the Schwinger multichannel formulation to electron-impact excitation of the b 3Sigma(+) state of CO

The Chi 1Sigma - b 3Sigma(+) transition of CO is described using the Schwinger multichannel method in the two-state approximation, in an energy range from threshold to 20 eV. The resonance structure is analyzed by performing a partial-wave decomposition and the resonance positions are established based on the typical discontinuous behavior in the K-matrix elements as well as the pi radian change in the partial-wave eigenphases. The resonance behavior is related to the concept of core-excited resonances and the 'grandparent' model of resonances. The results are related to the formation of the negative ion by carrying out bound-state calculations on the (5 sigma)(3 s sigma)-squared core-excited Rydberg state of CO(-), and the position is found to agree well with the low-energy resonance positions.

Weatherford, Charles A.↗