Search NASA⌕ Search

SEARCH · Search NASA

Results for “K-S”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRSDate not supplied

The Use of the BSRN Data as A Benchmark for the POWER Hourly DHI and DNI and In Validating Derived Hourly GTI

The satellite-based CERES SYN1deg hourly data is the source data of the POWER GIS solar data that covers 2001 to near present. The SYN1deg(Ed4.1) hourly GHI agrees well with the BSRN data, but the hourly DHI and DirHI (Direct Horizontal Irradiance) are positively and negatively, respectively, biased with appreciable magnitudes. The hourly DNI, derived by dividing the DirHI by cos(SZA), or the cosine of the solar zenith angle, is therefore negatively biased. Based on the statistics of comparisons with the BSRN data, we performed bias corrections on the hourly DHI and DNI. The corrections were executed in the 3-D phase space of latitude, cos(SZA), and cloud fraction (CLFR). The isotropic model is then used to derive the hourly global tilted irradiance (GTI). For validation purpose, we applied the isotropic model to the BSRN data at the original 1-, 2-, 3- or 5-minute interval. The satellite-based hourly GTI shows good agreement with their BSRN counterpart. We also examined two monthly-mean-based methods that empirically derive monthly mean GTI and DNI from monthly mean GHI and from both monthly mean GHI and DHI. The monthly-mean-based results compare favorably with the hourly-mean-based results. The GEWEX SRB (V4-IP) provides POWER with daily mean GHI for the years before the CERES era, and the data were corrected using quantile mapping by referencing the CERES SYN1deg data. We used the Kolmogorov -Smirnov test (K-S test) and Cramer-von Mises test to examine how well the results agree with the BSRN data. We found that if we set the lower limit for the daily mean GHI to 30 W m-2, the data can pass the K-S test at 0.01 significance level and the Cramer-von Mises test at 0.001 significance level. If no lower limit is set on the daily means, the data fail both tests. The satellite-based CERES SYN1deg hourly data is the source data of the POWER GIS solar data that covers 2001 to near present. The SYN1deg(Ed4.1) hourly GHI agrees well with the BSRN data, but the hourly DHI and DirHI (Direct Horizontal Irradiance) are positively and negatively, respectively, biased with appreciable magnitudes. The hourly DNI, derived by dividing the DirHI by cos(SZA), or the cosine of the solar zenith angle, is therefore negatively biased. Based on the statistics of comparisons with the BSRN data, we performed bias corrections on the hourly DHI and DNI. The corrections were executed in the 3-D phase space of latitude, cos(SZA), and cloud fraction (CLFR). The isotropic model is then used to derive the hourly global tilted irradiance (GTI). For validation purpose, we applied the isotropic model to the BSRN data at the original 1-, 2-, 3- or 5-minute interval. The satellite-based hourly GTI shows good agreement with their BSRN counterpart. We also examined two monthly-mean-based methods that empirically derive monthly mean GTI and DNI from monthly mean GHI and from both monthly mean GHI and DHI. The monthly-mean-based results compare favorably with the hourly-mean-based results. The GEWEX SRB (V4-IP) provides POWER with daily mean GHI for the years before the CERES era, and the data were corrected using quantile mapping by referencing the CERES SYN1deg data. We used the Kolmogorov -Smirnov test (K-S test) and Cramer-von Mises test to examine how well the results agree with the BSRN data. We found that if we set the lower limit for the daily mean GHI to 30 W m-2, the data can pass the K-S test at 0.01 significance level and the Cramer-von Mises test at 0.001 significance level. If no lower limit is set on the daily means, the data fail both tests.

Taiping Zhang↗
DOE OSTI2020

A Progress Report on Metal–Sulfur Batteries

Nonaqueous conversion-reaction sulfur chemistry has been attracting increasing attention over the past decade for the development of next-generation lithium-based batteries. Li–S batteries are currently approaching a nexus stage from lab-scale experiments to possible pragmatic applications. Inspired by the success of Li–S chemistry, other metal–sulfur batteries with a variety of metallic anodes, such as sodium, potassium, magnesium, calcium, and aluminum, have also started to attract attention. In comparison to lithium, Na, Mg, Al, K, and Ca are naturally more abundant and affordable. The Na-S, Mg-S, Al-S, K-S, and Ca-S battery systems provide a great potential for improving the volumetric energy density of sulfur-based batteries. The multivalent metal-sulfur systems, Mg-S, Al-S, and Ca-S, offer better safety features as well. However, the research and development on Na-S, Mg-S, Al-S, K-S, and Ca-S batteries is far behind the Li–S system due to many critical challenges. In this progress report, the fundamental principles of various metal–sulfur chemistries are first presented and compared. Then, the historical progress, recent advances, and key challenges of the Li–S, Na-S, Mg-S, Al-S, K-S, and Ca-S systems are summarized and discussed. Finally, future efforts and directions for both the fundamental and practical research are prospected.

25 ENERGY STORAGE↗
DOE OSTI2025

Electrolyte Design and Optimization for Alkali Metal‐Sulfur Batteries

Alkali metal-sulfur batteries, including lithium-sulfur (Li-S), sodium-sulfur (Na-S), and potassium-sulfur (K-S) systems, have garnered significant attention as promising electrochemical energy storage (EES) technologies. Among them, Li-S batteries stand out as strong contenders for next-generation energy storage, owing to their high energy density and the cost-effectiveness of sulfur-based cathodes. However, with the rapid technological advances and the escalating energy demand, lithium resources are becoming increasingly scarce, making it imperative to explore alternative metal anodes to replace lithium. Therefore, Na-S and K-S batteries, serving as counterparts to Li-S systems, are emerging as formidable contenders for next-generation energy storage technologies due to the abundant and cost-effective nature of sodium and potassium. Although Na-S and K-S batteries possess considerable potential in the energy sector, their development is still in its infancy, with performance constrained by the nascent state of electrolyte design and optimization. This review article provides a comprehensive overview of recent advancements and developments in liquid electrolytes for alkali metal-sulfur batteries. Additionally, it identifies key challenges and proposes future research directions aimed at enhancing electrolyte stability, optimizing interfacial compatibility, and improving the overall performance of alkali metal-sulfur batteries.

25 ENERGY STORAGE↗
NASA NTRS2000

The AGN Content of the Micron all Sky Survey

The Two Micron All Sky Survey (2MASS) began routine operations from its northern facility on Mt. Hopkins, AZ in June of 1997, and from its southern facility on Cerro Tololo, Chile in March of 1998. At each site, highly automated 1.3 m telescopes equipped with identical 3-channel cameras, are systematically imaging the sky in three near infrared wavelength bands, J (1.25 um), H (1.65 um) and K-s (2.17 um). The Survey will ultimately produce an Image Atlas containing nearly two million 512 x 1024 pixel images (1 arcsec/pix) in the three colors, a highly complete and reliable catalog containing approx. 300 million point sources having SNR greater than 10 photometry at J less or = 15.8, H less or = 15.1 and K-s less or = 14.3 mag. and an astrometric accuracy greater than 0.511 RMS, and a catalog of 1-2 million resolved sources, primarily galaxies, having SNR greater than 10 photometric accuracy at J less than or = 15.5, H less than or = 14.8 and K-s less than or = 13.5 mag. The 2MASS Sampler, an introductory set of data, was released to the community in December of 1998 (see http://www.ipac.caltech.edu/2mass/). We review the near IR and optical/IR properties of "conventional" QSOs from UV and optical samples, and estimate the number that will be detected by 2MASS. We also discuss 2MASS's ability to test for for new populations of extremely red AGN that have been missed by UV and Visual surveys, as suggested by from IRAS and radio studies. Results of spectroscopic follow-up of 2MASS-selected new AGN candidates will also be presented.

Cutri, R. M.↗
DOE OSTI2023

Seeing through noise in power laws

Despite widespread claims of power laws across the natural and social sciences, evidence in data is often equivocal. Modern data and statistical methods reject even classic power laws such as Pareto’s law of wealth and the Gutenberg–Richter law for earthquake magnitudes. We show that the maximum-likelihood estimators and Kolmogorov–Smirnov (K-S) statistics in widespread use are unexpectedly sensitive to ubiquitous errors in data such as measurement noise, quantization noise, heaping and censorship of small values. This sensitivity causes spurious rejection of power laws and biases parameter estimates even in arbitrarily large samples, which explains inconsistencies between theory and data. We show that logarithmic binning by powers of λ > 1 attenuates these errors in a manner analogous to noise averaging in normal statistics and that λ thereby tunes a trade-off between accuracy and precision in estimation. Binning also removes potentially misleading within-scale information while preserving information about the shape of a distribution over powers of λ, and we show that some amount of binning can improve sensitivity and specificity of K-S tests without any cost, while more extreme binning tunes a trade-off between sensitivity and specificity. We therefore advocate logarithmic binning as a simple essential step in power-law inference.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2023

Seeing through noise in power laws

Despite widespread claims of power laws across the natural and social sciences, evidence in data is often equivocal. Modern data and statistical methods reject even classic power laws such as Pareto’s law of wealth and the Gutenberg–Richter law for earthquake magnitudes. We show that the maximum-likelihood estimators and Kolmogorov–Smirnov (K-S) statistics in widespread use are unexpectedly sensitive to ubiquitous errors in data such as measurement noise, quantization noise, heaping and censorship of small values. This sensitivity causes spurious rejection of power laws and biases parameter estimates even in arbitrarily large samples, which explains inconsistencies between theory and data. We show that logarithmic binning by powers of λ > 1 attenuates these errors in a manner analogous to noise averaging in normal statistics and that λ thereby tunes a trade-off between accuracy and precision in estimation. Binning also removes potentially misleading within-scale information while preserving information about the shape of a distribution over powers of λ, and we show that some amount of binning can improve sensitivity and specificity of K-S tests without any cost, while more extreme binning tunes a trade-off between sensitivity and specificity. We therefore advocate logarithmic binning as a simple essential step in power-law inference.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2021

Higher Compact Multiple Occurrence around Metal-poor M-dwarfs and Late-K-dwarfs

The planet–metallicity correlation serves as a potential link between exoplanet systems as we observe them today and the effects of bulk composition on the planet formation process. Many observers have noted a tendency for Jovian planets to form around stars with higher metallicities; however, there is no consensus on a trend for smaller planets. Here, we investigate the planet–metallicity correlation for rocky planets in single- and multi-planet systems around Kepler M-dwarf and late-K-dwarf stars. Due to molecular blanketing and the dim nature of these low-mass stars, it is difficult to make direct elemental abundance measurements via spectroscopy. We instead use a combination of accurate and uniformly measured parallaxes and photometry to obtain relative metallicities and validate this method with a subsample of spectroscopically determined metallicities. We use the Kolmogorov–Smirnov (K-S) test, Mann–Whitney U-test, and Anderson–Darling (AD) test to compare the compact multiple planetary systems with single-transiting planet systems and systems with no detected transiting planets. We find that the compact multiple planetary systems are derived from a statistically more metal-poor population, with a p-value of 0.015 in the K-S test, a p-value of 0.005 in the Mann–Whitney U-test, and a value of 2.574 in the AD test statistic, which exceeds the derived threshold for significance by a factor of 25. We conclude that metallicity plays a significant role in determining the architecture of rocky planet systems. Compact multiples either form more readily, or are more likely to survive on gigayear timescales, around metal-poor stars.

47 OTHER INSTRUMENTATION↗
NASA NTRS1986

Formation of active region and quiescent prominence magnetic field configurations

To investigate the formation of prominences, researchers studied chromospheric mass injection into an overlying coronal dipole magnetic field using a 2-D ideal magnetohydrodynamic (MHD) numerical model. Researchers propose that active region prominences are formed by chromospheric plasmas injected directly into the overlying coronal magnetic field and that quiescent prominences are formed by plasmas evaporated at the interface between spicules and corona. Hence, for the simulation of an active region prominence magnetic field we inject the mass from one side, but use a symmetric mass injection to form a quiescent prominence field configuration. Researchers try to find optimum conditions for the formation of Kippenhahn-Schuluter(K-S)type field configuration for stable support of the injection plasmas. They find that the formation of K-S type field configuration by mass injection requires a delicate balance between injection velocity, density, and overlying magnetic fields. These results may explain why a prominence does not form on every neutral line.

An, C.-H.↗
NASA NTRS1990

The role of condensation and heat conduction in the formation of prominences - An MHD simulation

The effects of condensation and thermal conduction on the formation of Kippenhahn-Schlueter (K-S) type prominences in quiet regions (QP) due to symmetric mass injection are investigated. To implement this investigation a self-consistent, two-dimensional, nonplanar, time-dependent MHD simulation model is developed. In the model, various values of the injection velocity, density, and magnetic field strength are used to determine the most favorable conditions for the QP formation. Based on these simulation results, it is found that the formation of a K-S type field configuration should be considered as a dynamic process which needs both condensation amd mass injection to supply enough mass to maintain such a configuration to complete the quiescent prominence formation process.

Wu, S. T.↗
NASA NTRS1997

Enhanced Multiobjective Optimization Technique for Comprehensive Aerospace Design

A multidisciplinary design optimization procedure which couples formal multiobjectives based techniques and complex analysis procedures (such as computational fluid dynamics (CFD) codes) developed. The procedure has been demonstrated on a specific high speed flow application involving aerodynamics and acoustics (sonic boom minimization). In order to account for multiple design objectives arising from complex performance requirements, multiobjective formulation techniques are used to formulate the optimization problem. Techniques to enhance the existing Kreisselmeier-Steinhauser (K-S) function multiobjective formulation approach have been developed. The K-S function procedure used in the proposed work transforms a constrained multiple objective functions problem into an unconstrained problem which then is solved using the Broyden-Fletcher-Goldfarb-Shanno (BFGS) algorithm. Weight factors are introduced during the transformation process to each objective function. This enhanced procedure will provide the designer the capability to emphasize specific design objectives during the optimization process. The demonstration of the procedure utilizes a computational Fluid dynamics (CFD) code which solves the three-dimensional parabolized Navier-Stokes (PNS) equations for the flow field along with an appropriate sonic boom evaluation procedure thus introducing both aerodynamic performance as well as sonic boom as the design objectives to be optimized simultaneously. Sensitivity analysis is performed using a discrete differentiation approach. An approximation technique has been used within the optimizer to improve the overall computational efficiency of the procedure in order to make it suitable for design applications in an industrial setting.

Chattopadhyay, Aditi↗
NASA NTRS2000

An Enhanced Multi-Objective Optimization Technique for Comprehensive Aerospace Design

An enhanced multiobjective formulation technique, capable of emphasizing specific objective functions during the optimization process, has been demonstrated on a complex multidisciplinary design application. The Kreisselmeier-Steinhauser (K-S) function approach, which has been used successfully in a variety of multiobjective optimization problems, has been modified using weight factors which enables the designer to emphasize specific design objectives during the optimization process. The technique has been implemented in two distinctively different problems. The first is a classical three bar truss problem and the second is a high-speed aircraft (a doubly swept wing-body configuration) application in which the multiobjective optimization procedure simultaneously minimizes the sonic boom and the drag-to-lift ratio (C(sub D)/C(sub L)) of the aircraft while maintaining the lift coefficient within prescribed limits. The results are compared with those of an equally weighted K-S multiobjective optimization. Results demonstrate the effectiveness of the enhanced multiobjective optimization procedure.

Chattopadhyay, Aditi↗
DOE OSTI2024

X-ray fluorescence and XANES spectroscopy revealed diverse potassium chemistries and colocalization with phosphorus in the ectomycorrhizal fungus Paxillus ammoniavirescens

Ectomycorrhizal (ECM) fungi play a major role in forest ecosystems and managed tree plantations. Particularly, they facilitate mineral weathering and nutrient transfer towards colonized roots. Among nutrients provided by these fungi, potassium (K) has been understudied compared to phosphorus (P) or nitrogen (N). The ECM fungus Paxillus ammoniavirescens is a generalist species that interacts with the root of many trees and can directly transfer K to them, including loblolly pine. However, the forms of K that ECM fungi can store is still unknown. Here, we used synchrotron potassium X-ray fluorescence (XRF) and K-edge X-ray Absorption Near Edge Structure (XANES) spectroscopy on P. ammoniavirescens growing in axenic conditions to investigate the K chemistries accumulating in the center and the edge of the mycelium. We observed that various K forms accumulated in different part of the mycelium, including K-nitrate (KNO 3 ), K-C-O compounds (such as K-tartrate K 2 (C 4 H 4 O 6 ) and K-oxalate (K 2 C 2 O 4 )), K-S and K-P compounds. Saprotrophic fungi have been shown to excrete carboxylic acids, which in turn play a role in soil mineral weathering. Our finding of several K counter-ions to carboxylic acids may suggest that, besides their direct transfer to colonized roots, K ions can also be involved in the production of compounds necessary for sourcing nutrients from their surrounding environment by ECM fungi. Additionally, this work reveals that XANES spectroscopy can be used to identify the various forms of K accumulating in biological systems.

Ectomycorrhizal symbiosis↗
DOE OSTI2024

Investigation of the thermal decomposition of Pu(IV) oxalate: a transmission electron microscopy study

The degradation of the internal structure of plutonium (IV) oxalate during calcination was investigated with Transmission Electron Microscopy (TEM), electron diffraction, Electron Energy-Loss Spectroscopy (EELS), and 4D Scanning TEM (STEM). TEM lift-outs were prepared from samples that had been calcined at 300°C, 450°C, 650°C and 950°C. The resulting phase at all calcination temperatures was identified as PuO 2 with electron diffraction. The grain size range was obtained with high-resolution TEM. In addition, 4D STEM images were analyzed to provide grain size distributions. In the 300°C calcined sample, the grains were <10 nm in diameter, at 650°C, the grains ranged from 10 to 20 nm, and by 950°C, the grains were 95–175 nm across. Using the Kolmogorov-Smirnov (K-S) two sample test, it was shown that morphological measurements obtained from 4D-STEM provided statistically significant distributions to distinguish samples at the different calcination conditions. Using STEM-EELS, carbon was shown to be present in the low temperature calcined samples associated with oxalate but had formed carbon (possibly graphite) deposits in the 950°C calcined sample. This work highlights the new methods of STEM-EELS and 4D-STEM for studying the internal structure of special nuclear materials (SNM).

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
NASA NTRS1982

Vaporization thermodynamics of K2S and K2SO3

The vaporization reactions, vapor pressures, and thermodynamics of potassium sulfide and potassium sulfite were studied for purposes of providing fundamental data for the seed cycle in magnetohydrodynamic electric power generation. Rate of effusion studies, supported by tube furnace experiments, X-ray powder diffraction, mass spectrometry and appropriate chemical analyses and tests, revealed that potassium sulfite disproportionates at high temperatures to form potassium sulfide and potassium sulfate. Potassium sulfide was observed to vaporize incongruently, the initial vapors beng predominantly potassium atoms, with minor species being S2 and various K-S molecules. The ratio of K/S2 in the vapor is very large initially and decreases steadily with prolonged heating. Several materials were evaluated for purposes of containing K2S/K2SO3 at temperatures or = 800 C: Pt, Mo, W, quartz, machinable glass, BN, high density graphite, pyrolytic coated graphite, and alumina. Of these, only alumina was observed to be chemically inert to both K2S but reacted with K2SO3. The other materials were not suitable for either substance. Thermodynamic calculations based on measured vapor pressures and approximate free energy functions are described. Results from isothermal total mass loss experiments and from thermogravimetric experiments are also included.

Bennet, J. E.↗
NASA NTRS1991

Void statistics of the CfA redshift survey

Clustering properties of two samples from the CfA redshift survey, each containing about 2500 galaxies, are studied. A comparison of the velocity distributions via a K-S test reveals structure on scales comparable with the extent of the survey. The void probability function (VPF) is employed for these samples to examine the structure and to test for scaling relations in the galaxy distribution. The galaxy correlation function is calculated via moments of galaxy counts. The shape and amplitude of the correlation function roughly agree with previous determinations. The VPFs for distance-limited samples of the CfA survey do not match the scaling relation predicted by the hierarchical clustering models. On scales not greater than 10/h Mpc, the VPFs for these samples roughly follow the hierarchical pattern. A variant of the VPF which uses nearly all the data in magnitude-limited samples is introduced; it accounts for the variation of the sampling density with velocity in a magnitude-limited survey.

Vogeley, Michael S.↗
NASA NTRS1992

Design of high speed proprotors using multiobjective optimization techniques

An integrated, multiobjective optimization procedure is developed for the design of high speed proprotors with the coupling of aerodynamic, dynamic, aeroelastic, and structural criteria. The objectives are to maximize propulsive efficiency in high speed cruise and rotor figure of merit in hover. Constraints are imposed on rotor blade aeroelastic stability in cruise and on total blade weight. Two different multiobjective formulation procedures, the Min summation of beta and the K-S function approaches are used to formulate the two-objective optimization problems.

Mccarthy, Thomas R.↗
NASA NTRS2000

Near-infrared galaxy morphology atlas

We present a representative sample of near-infrared (1-2 mu m) images spanning the Hubble galaxy morphology classification sequence. The images come from the Two Micron All Sky Survey, with a range in brightness of 7 mag , K-s , 13.5 mag, and the morphological classifications from the NASA/IPAC Extragalactic Database.

Hubble sequence dwarf galaxy infrared↗