Search NASA⌕ Search

SEARCH · Search NASA

Results for “LANDING SYSTEM”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1983

Terminal area automatic navigation, guidance and control research using the Microwave Landing System (MLS). Part 5: Design and development of a Digital Integrated Automatic Landing System (DIALS) for steep final approach using modern control techniques

The design and development of a 3-D Digital Integrated Automatic Landing System (DIALS) for the Terminal Configured Vehicle (TCV) Research Aircraft, a B-737-100 is described. The system was designed using sampled data Linear Quadratic Gaussian (LOG) methods, resulting in a direct digital design with a modern control structure which consists of a Kalman filter followed by a control gain matrix, all operating at 10 Hz. DIALS uses Microwave Landing System (MLS) position, body-mounted accelerometers, as well as on-board sensors usually available on commercial aircraft, but does not use inertial platforms. The phases of the final approach considered are the localizer and glideslope capture which may be performed simultaneously, localizer and steep glideslope track or hold, crab/decrab and flare to touchdown. DIALS captures, tracks and flares from steep glideslopes ranging from 2.5 deg to 5.5 deg, selected prior to glideslope capture. Digital Integrated Automatic Landing System is the first modern control design automatic landing system successfully flight tested. The results of an initial nonlinear simulation are presented here.

Halyo, N.↗
NASA NTRS1981

Operational considerations in utilization of microwave landing system approach and landing guidance

The characteristics of microwave landing system (MLS) equipment are reviewed and the flight performance of the terminal configured vehicle B-737 airplane during nearly five years of flight experience with MLS is summarized. Most of these flights involved curved, descending flight paths with automatic landings and final approaches as short as 0.44 n. mi. Possible uses to solve noise abatement problems with MLS equipment of varying degrees of complexity are discussed. It is concluded that altitude derived from MLS is superior to other sources near the airport traffic pattern.

White, W. F.↗
NASA NTRS1967

Spacecraft landing systems.

Spacecraft landing systems technology, materials and hardware, model impact testing and para-sail landing rocket program

LANDING SYSTEM↗
NASA NTRS2019

Oxygen Production System for Refueling Human Landing System Elements

Current NASA plans for lunar exploration include a human lunar landing system, comprised of separate descent andascent modules, with the eventual goal of reusability. Different oxygen production processes were studied to evaluatethe feasibility of producing 10 tons of oxygen per year assuming a high latitude landing location. The study includesconsideration of packaging the ISRU components on the descent module, methods to transfer the regolith from theexcavators to the processing plant which may be mounted well above the lunar surface, and general concept ofoperations for excavation, oxygen production, and liquefaction and storage. A solar-based power system was alsodesigned and packaged on the lander, including the use of direct solar thermal energy where appropriate.

Linne, Diane↗
NASA NTRS1981

Development of a digital integrated automatic landing system /DIALS/ for steep approach and landing

This paper describes the development of a three-dimensional digital integrated automatic landing system (DIALS) for a small commercial jet transport. The system uses the Microwave Landing System (MLS), body-mounted accelerometers, as well as on-board sensors usually available on commercial aircraft, but does not require inertial platforms. The system development uses modern digital control techniques. The phases of flight considered are the localizer and glideslope capture, which may be performed simultaneously or sequentially, localizer and glideslope track (hold), crab/decrab, and flare to touchdown. The system captures, tracks and flares from steep glideslopes (2.5 - 5.5 deg) selected prior to glideslope capture. The results of a nonlinear simulation are presented.

Halyo, N.↗
NASA NTRS1981

Operational considerations in utilization of microwave landing system approach and landing guidance

The characteristics and performance of MLS equipment utilized by the TCV B-737. Several classes of MLS service and approach procedures are discussed in light of TCV experience. Since the early uses of MLS involves procedures identical to ILS, most of the discussion is concerned with exploitation of MLS capabilities not possessed by ILS. Examples are given of how this could be done by using MLS to enhance the safety and utility of procedures presently in use for noise abatement. Some areas which require definition of new procedures and conventions are indicated.

White, W. F.↗
NASA NTRS1985

Development and flight test of a helicopter, X-band, portable precision landing system concept

A beacon landing system (BLS) is being developed and flight tested as a part of NASA's Rotorcraft All-Weather Operations Research Program. The system is based on state-of-the-art X-band radar technology and digital processing techniques. The BLS airborne hardware consists of an X-band receiver and a small microprocessor, installed in conjunction with the aircraft instrument landing system (ILS) receiver. The microprocessor analyzes the X-band, BLS pulses and outputs ILS-compatible localizer and glide slope signals. Range information is obtained using an on-board weather/mapping radar in conjunction with the BLS. The ground station is an inexpensive, portable unit; it weighs less than 70 lb and can be quickly deployed at a landing site. Results from the flight-test program show that the BLS has a significant potential for providing rotorcraft with low-cost, precision instrument approach capability in remote areas.

Davis, T. J.↗
NASA NTRS1985

Development and flight test of a helicopter, X-band, portable precision landing system concept

A beacon landing system (BLS) is being developed and flight tested as a part of NASA's Rotorcraft All-Weather Operations Research Program. The system is based on state-of-of-the-art X-band radar technology and digital processing techniques. The bLS airborne hardware consists of an X-band receiver and a small micropreocessor, installed in conjunction wht the aircraft instrument landing system (ILS) receiver. The microprocessor analyzes the X-band, BLS pulses and outputs ILS-compatible localizer and glide slope signals. Range information is obtained using an on-board weather/mapping radar in conjunction with the BLS. The ground station is an inexpensive, portable unit; it weighs less than 70 lb and can be quickly deployed at a landing site. Results from the flight-test program show that the BLS has a significant potential for providing rotorcaraft with low-cost, precision instrument approach capability in remote areas.

Davis, T. J.↗
NASA NTRSDate not supplied

NASA's Artemis Human Landing Systems

The Human Landing System (HLS) is the mode of transportation that will take astronauts to the lunar surface in NASA's Artemis lunar exploration program. On early missions, the astronauts will live inside the pressurized crew cabin portion of the lander for up to a week. The HLS program, based at Marshall Space Flight Center in Huntsville, Alabama, is working closely with commercial partners to build innovative and technically advanced lunar landers, leveraging decades of human spaceflight experience and the speed of the commercial sector. In addition to the NextSTEP-2 Broad Agency Announcement Appendix H Option A contract that includes one uncrewed and one crewed demonstration mission to the lunar surface, the HLS program is taking steps to establish a regular cadence of crewed missions to the surface of the Moon. This paper will discuss the HLS program’s latest development activities.

Lisa Watson-Morgan↗
NASA NTRSDate not supplied

NASA’s Artemis Human Landing Systems

The Human Landing System (HLS) is the mode of transportation that will take astronauts to the lunar surface in NASA's Artemis lunar exploration program. On early missions, the astronauts will live inside the pressurized crew cabin portion of the lander for up to a week. The HLS program, based at NASA’s Marshall Space Flight Center in Huntsville, Alabama, is working closely with commercial partners to build innovative and technically advanced lunar landers, leveraging decades of human spaceflight experience and the speed of the commercial sector. In addition to the NextSTEP-2 Broad Agency Announcement Appendix H Option A contract that includes one uncrewed and one crewed demonstration mission to the lunar surface, the HLS program is taking steps to establish a regular cadence of crewed missions to the surface of the Moon. This paper will discuss the HLS program’s latest development activities.

Lisa Watson-Morgan↗
NASA NTRS2017

The Intelligent Landing System for Safe and Precise Landing on Europa

Europa, the smallest of Jupiter’s Galilean moons, is thought to harbor a vast liquid water ocean beneath its icy crust, making it one of the most scientifically intriguing targets for a robotic surface sampling mission in our Solar System. However, autonomously landing a spacecraft safely and precisely on Europa poses unique challenges, such as very little existing high-resolution reconnaissance imagery, a surface expected to be very rough and hazardous over a wide range of scales, an extremely intense ionizing radiation environment, and very limited lander resources for mass and volume. To address these challenges, we propose a novel Intelligent Landing System (ILS) combining four Guidance, Navigation & Control (GN&C) sensing functions – velocimetry, altimetry, map-relative localization, and hazard detection – that would together enable safe and precise landing on Europa’s surface. The ILS is a smart sensor system, combining an inertial measurement unit (IMU), a monocular, passive-optical camera, and a light detection and ranging (Li-DAR) sensor with dedicated computing resources as well as an onboard 3D terrain map. The ILS leverages more than a decade of technology development from programs such as the Lander Vision System, currently baselined on the Mars 2020 mission. This paper provides a detailed description of the proposed ILS architecture and concept of operations, as well as select preliminary simulation results to assess performance and robustness.

Trawny, Nikolas↗
NASA NTRS1982

Shuttle automatic landing system

The Shuttle automatic landing system design requirements are discussed, the approach and landing flight phase is described, and the hardware and software subsystems are functionally described. Emphasis is placed on the complexity, flexibility, and criticality of the software function. The software structure, critical computational problems, and verification process as a subsystem are discussed. Finally, the hardware/software verification activities required before flight test of the autoland system are described, along with the results from two flight tests and the planned system certification to the operational flight boundaries.

Tsikalas, G.↗
NASA NTRS1973

Study of application of adaptive systems to the exploration of the solar system. Volume 3: Mars landed systems

The results of a more detailed study of three missions to the surface of Mars: (1) an advanced lander, (2) a lander with a small tethered rover, and (3) a lander with a medium sized rover that operates independently of the lander for most of its functions but communicates with Earth through the lander are presented. For all three missions it was assumed that the Viking orbiter and lander would be used with modifications as required to improve the science package, to accommodate the rovers, and to handle the increased payloads.

Source record↗
NASA NTRS1996

NASA Landing Systems Research Aircraft

NASA Landing Systems Research Aircraft (LSRA) is Convair 990 airplane modified to incorporate tire-and-landing-gear test facility containing test fixture. Airplane instrumented to measure loads, velocities, and slip angles between tires and runways.

Carter, John F.↗