Search NASA⌕ Search

SEARCH · Search NASA

Results for “LANTHANUM BORIDES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

A New Grain Refiner for Ferritic Steels

A new grain refiner, LaB{sub 6}, was identified for ferritic steels based on the crystallographic calculation using the edge-to-edge matching model. Addition of 0.5 wt pct LaB{sub 6} led to a reduction of the average grain size from 765 to 92 μm and the proportion of the columnar structure from 35 to 8 pct in an as-cast Fe-4Si ferritic alloy. Although LaB{sub 6} was supposed to act as an active inoculant for δ-ferrite, thermodynamic calculation indicated that LaB{sub 6} is not thermodynamically stable in the melt of the Fe-4Si alloy. It was subject to decompose into La and B solutes. Consequently, both La and B reacted with Fe, O and S, forming different compounds. Microstructural examination at room temperature observed La{sub 2}SO{sub 2} and La{sub 2}O{sub 3} particles within the ferrite grains and Fe{sub 2}B along the grain boundaries in the samples. Through EBSD analysis, a reproducible orientation relationship between ferrite and La{sub 2}SO{sub 2} was identified. In addition, the edge-to-edge matching calculation also predicted the high potency for La{sub 2}SO{sub 2} to be an effective nucleant for δ-ferrite. It was considered that the grain refinement of LaB{sub 6} was attributed to the enhanced heterogeneous nucleation of δ-ferrite by La{sub 2}SO{sub 2}, and the solute effect of B due to the high Q-value in ferrite.

36 MATERIALS SCIENCE↗

A new route for the synthesis of submicron-sized LaB{sub 6}

Submicron crystalline LaB{sub 6} has been successfully synthesized by a solid-state reaction of La{sub 2}O{sub 3} with NaBH{sub 4} at 1200 °C. The effects of reaction temperature on the crystal structure, grain size and morphology were investigated by X-ray diffraction, scanning electron microscope and transmission electron microscope. It is found that when the reaction temperature is in the range of 1000–1100 °C, there are ultrafine nanoparticles and nanocrystals that coexist. When the reaction temperature elevated to 1200 °C, the grain morphology transformed from ultrafine nanoparticle to submicron crystals completely. High resolution transmission electron microscope images fully confirm the formation of LaB{sub 6} cubic structure. - Highlights: • Single-phased LaB{sub 6} have been synthesized by a solid-state reaction in a continuous evacuating process. • The reaction temperature has a important effect on the phase composition. • The grain size increase from nano-size to submicron with increasing reaction temperature.

36 MATERIALS SCIENCE↗

Additive-assisted synthesis of boride, carbide, and nitride micro/nanocrystals

General and simple methods for the syntheses of borides, carbides and nitrides are highly desirable, since those materials have unique physical properties and promising applications. Here, a series of boride (TiB{sub 2}, ZrB{sub 2}, NbB{sub 2}, CeB{sub 6}, PrB{sub 6}, SmB{sub 6}, EuB{sub 6}, LaB{sub 6}), carbide (SiC, TiC, NbC, WC) and nitride (TiN, BN, AlN, MgSiN{sub 2}, VN) micro/nanocrystals were prepared from related oxides and amorphous boron/active carbon/NaN{sub 3} with the assistance of metallic Na and elemental S. In-situ temperature monitoring showed that the reaction temperature could increase quickly to {approx}850 Degree-Sign C, once the autoclave was heated to 100 Degree-Sign C. Such a rapid temperature increase was attributed to the intense exothermic reaction between Na and S, which assisted the formation of borides, carbides and nitrides. The as-obtained products were characterized by XRD, SEM, TEM, and HRTEM techniques. Results in this report will greatly benefit the future extension of this approach to other compounds. - Graphical abstract: An additive-assisted approach is successfully developed for the syntheses of borides, carbides and nitrides micro/nanocrystals with the assistance of the exothermic reaction between Na and S. Highlights: Black-Right-Pointing-Pointer An additive-assisted synthesis strategy is developed for a number of borides, carbides and nitrides. Black-Right-Pointing-Pointer The reaction mechanism is demonstrated by the case of SiC nanowires. Black-Right-Pointing-Pointer The formation of SiC nanowires is initiated by the exothermic reaction of Na and S.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Boron-rich plasma by high power impulse magnetron sputtering of lanthanum hexaboride

Boron-rich plasmas have been obtained using a LaB{sub 6} target in a high power impulse sputtering (HiPIMS) system. The presence of {sup 10}B{sup +}, {sup 11}B{sup +}, Ar{sup 2+}, Ar{sup +}, La{sup 2+}, and La{sup +} and traces of La{sup 3+}, {sup 12}C{sup +}, {sup 14}N{sup +}, and {sup 16}O{sup +} have been detected using an integrated mass and energy spectrometer. Peak currents as low as 20 A were sufficient to obtain plasma dominated by {sup 11}B{sup +} from a 5 cm planar magnetron. The ion energy distribution function for boron exhibits an energetic tail extending over several 10 eV, while argon shows a pronounced peak at low energy (some eV). This is in agreement with models that consider sputtering (B, La) and gas supply (from background and 'recycling'). Strong voltage oscillations develop at high current, greatly affecting power dissipation and plasma properties.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

First-principles prediction of solar radiation shielding performance for transparent windows of GdB{sub 6}

The structural, electronic, magnetic, and optical properties of GdB{sub 6} are studied using the first-principles calculations. Calculated values for magnetic and optical properties and lattice constant are found to be consistent with previously reported experimental results. The calculated results show that GdB{sub 6} is a perfect near-infrared absorption/reflectance material that could serve as a solar radiation shielding material for windows with high visible light transmittance, similar to LaB{sub 6}, which is assigned to its plasma oscillation and a collective oscillation (volume plasmon) of carrier electrons. It was found that the magnetic 4f electrons of Gd are not relevant to the important optical properties of GdB{sub 6}. These theoretical studies serve as a reference for future studies.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Inverse and normal magnetocaloric effects in LaFe{sub 12}B{sub 6}

Intrinsic magnetic properties and magnetocaloric effect were studied for LaFe{sub 12}B{sub 6} itinerant-electron system, which presents an antiferromagnetic ground state below 36 K. For certain magnetic fields values, LaFe{sub 12}B{sub 6} exhibits a sequence of two successive magnetic transitions: an antiferromagnetic-ferromagnetic (AFM-FM) transition at low temperature followed by a ferromagnetic-paramagnetic transition, leading to normal and inverse magnetocaloric effects, respectively. At finite temperatures, both antiferromagnetic (AFM) and paramagnetic states can be transformed into a ferromagnetic (FM) state via a field-induced metamagnetic transition accompanied with a huge magnetic hysteresis. Moreover, we reveal that, at low temperatures, the magnetization displays abrupt jumps across the first-order AFM-FM transition, giving rise to an unusual and unique staircase-like behavior. LaFe{sub 12}B{sub 6} exhibits both normal magnetocaloric effect around the Curie temperature and large inverse magnetocaloric effect around the AFM-FM transition temperature; for μ{sub 0}ΔH = 7 T, ΔS{sub M} is found to be −6.8 and 19 J kg{sup −1} K{sup −1} around 38 and 8 K, respectively.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Raman Scattering by Crystals of Rare-Earth Hexaborides with Different Isotopes of Boron

Monocrystals of lanthanum hexaboride LaB{sub 6} containing both natural boron and its isotopes {sup 10}B and {sup 11}B have been produced using the solution-melt method. Polyelement hexaboride rare-earths have been grown and the corresponding ceramics have been synthesized for the first time. All these crystals have been studied by means of various techniques, generally using Raman scattering. The Raman spectra attributed to various spectral lines corresponding to nonanalyzable representations have been obtained and interpreted. Frequencies and half-widths of spectral lines have been obtained, the removal of degeneracy and the development of respective splitting of degenerate oscillations induced by defects, mainly by boron isotope inclusions, have been identified. The influence of defects on the Raman spectra has been determined.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Size effect of added LaB{sub 6} particles on optical properties of LaB{sub 6}/Polymer composites

Modified LaB{sub 6} particles with sizes ranging from 50 nm to 400 nm were added into polymethyl methacrylate (PMMA) matrix in order to investigate the effect of added LaB{sub 6} particles on optical properties of LaB{sub 6}/PMMA composites. Method of in-situ polymerization was applied to prepare PMMA from raw material-methyl methacrylate (MMA), a process during which LaB{sub 6} particles were dispersed in MMA. Ultraviolet-visible-near infrared (UV-vis-NIR) absorption spectrum was used to study optical properties of the as-prepared materials. The difference in particle size could apparently affect the composites' absorption of visible light around wavelength of 600 nm. Added LaB{sub 6} particles with size of about 70 nm resulted in the best optical properties among these groups of composites. - Graphical abstract: 70 nm LaB{sub 6} particles resulted in the best performance on absorption of VIS and NIR, which could not be apparently achieved by LaB{sub 6} particles beyond nano-scale. Highlights: Black-Right-Pointing-Pointer LaB{sub 6}/PMMA composites were prepared using the method of in-situ polymerization. Black-Right-Pointing-Pointer LaB{sub 6} particles added in MMA prolonged the time needed for its pre-polymerization. Black-Right-Pointing-Pointer Nanosized LaB{sub 6} particles could obviously absorb much NIR but little VIS.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Charging of dust particles in an illuminated open complex plasma system

This paper presents an investigation of the charging of dust particles in a dusty plasma, irradiated by white light in near space at satellite altitudes. In deference to the recent emphasis on the character of openness in a dusty plasma, the investigation is based on the balance of the number density and energy of electrons, ions, and neutral particles as well as the energy balance of the dust particles and the charge neutrality condition. The accretion of electrons/ions and the emission of electrons by the dust particles, the ionization of neutral particles and the recombination of electrons and ions, and binary collisions between electrons, ions, and neutral atoms are the processes considered herein; the energy exchange associated with these processes has also been considered. The formulation is applicable to dusty plasmas in space and laboratory, where the photoemission of electrons is the dominant mechanism for electron generation. As an illustration a parametric study of the charging of the dust of Cs (cesium) coated bronze, LaB{sub 6}, and CeO{sub 2}, illuminated by solar radiation in a plasma environment, characteristic of day time ionosphere at an altitude of 150 km has been made. The theory is valid when the mean free path of electrons for accretion by the dust particles is less than the dimensions of the dust clouds.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Refinement effect of two rare earth borides in an Al-7Si-4Cu alloy: A comparative study

Highlights: • Refinement performance of Al-La-B and Al-Ce-B refiners in Al-7Si-4Cu alloy was investigated. Due to the orientation relationships between rare earth borides and Al, CeB{sub 6} and LaB{sub 6} can act as the nucleation substrate of α-Al and refine Al-Si-Cu casting alloy effectively. • Al-Ce-B refiner showed better refining efficacy than Al-La-B refiner because of the lower lattice mismatch and less angel difference of the certain orientation relationship between CeB{sub 6} and Al, demonstrated by TEM analysis. • Effects of Al-La-B and Al-Ce-B refiners on alloy defects and tensile properties were investigated. The best refiner addition level in this alloy is considered to be 1.0wt%. Tensile properties of Al-7Si-4Cu alloy were prominently improved owing to the better refined microstructures and much fewer shrinkage defects. - Abstract: In this paper, refinement performance of Al-La-B and Al-Ce-B refiners in Al-7Si-4Cu alloy and their effects on alloy defects and tensile properties were investigated. Due to the orientation relationships between rare earth borides and Al, CeB{sub 6} and LaB{sub 6} can act as the nucleation substrate of α-Al and refine Al-Si-Cu casting alloy effectively. Al-Ce-B refiner showed better refining efficacy than Al-La-B refiner because of the lower lattice mismatch and less angel difference of the certain orientation relationship between CeB{sub 6} and Al, demonstrated by TEM analysis. Tensile properties of Al-7Si-4Cu alloy were prominently improved from 204.4 ± 5.9 MPa to 250.6 ± 6.7 MPa in as-cast state and 335.7 ± 6.5 MPa to 386.0 ± 7.0 MPa in heat treatment state owing to the better refined microstructures and much fewer shrinkage defects. However, when the addition level of the refiners was higher than 1.0 wt%, the amount of gas pores in the alloy significantly increased. Hence, the best refiner addition level in this alloy is considered to be 1.0 wt%.

36 MATERIALS SCIENCE↗

Emission properties and back-bombardment for CeB{sub 6} compared to LaB{sub 6}

The emission properties of CeB{sub 6} compared to LaB{sub 6} thermionic cathodes have been measured using an electrostatic DC gun. Obtaining knowledge of the emission properties is the first step in understanding the back-bombardment effect that limits wide usage of thermionic radio-frequency electron guns. The effect of back-bombardment electrons on CeB{sub 6} compared to LaB{sub 6} was studied using a numerical simulation model. The results show that for 6 μs pulse duration with input radio-frequency power of 8 MW, CeB{sub 6} should experience 14% lower temperature increase and 21% lower current density rise compared to LaB{sub 6}. We conclude that CeB{sub 6} has the potential to become the future replacement for LaB{sub 6} thermionic cathodes in radio-frequency electron guns.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Novel borothermal route for the synthesis of lanthanum cerium hexaborides and their field emission properties

The present study describes the development of a simple approach to stabilize polycrystalline lanthanum cerium hexaborides without using any flux and at ambient pressure. The nanostructured lanthanum-cerium borides were synthesized using hydroxide precursors. These precursors (La{sub 1-x}Ce{sub x}(OH){sub 3}, x=0.1, 0.2, 0.3 and 0.5) were synthesized via hydrothermal route in the presence of Tergitol (surfactant, nonylphenol ethoxylate) as a capping agent. The precursors on heating with boron at 1300 Degree-Sign C lead to the formation of nanostructures (cubes, rods and pyramids) of lanthanum cerium hexaboride. We have investigated the field emission behaviour of the hexaboride films fabricated by spin coating. It was observed that the pyramidal shaped nanostructures of La{sub 0.5}Ce{sub 0.5}B{sub 6} shows excellent field emission characteristics with high field enhancement factor of 4502. - Graphical abstract: Nanostructured lanthanum cerium hexaboride with efficient field emission have fabricated by low temperature hydroxide precursor mediated route. Highlights: Black-Right-Pointing-Pointer New methodology to prepare lanthanum cerium hexaboride at 1300 Degree-Sign C via borothermal route. Black-Right-Pointing-Pointer Nanostructured lanthanum cerium hexaboride film by spin coating process. Black-Right-Pointing-Pointer Nanopyramids based lanthanum cerium hexaboride shows excellent field emission.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Quantitative measurement for the microstructural parameters of nano-precipitates in Al-Mg-Si-Cu alloys

Size, number density and volume fraction of nano-precipitates are important microstructural parameters controlling the strengthening of materials. In this work a widely accessible, convenient, moderately time efficient method with acceptable accuracy and precision has been provided for measurement of volume fraction of nano-precipitates in crystalline materials. The method is based on the traditional but highly accurate technique of measuring foil thickness via convergent beam electron diffraction. A new equation is proposed and verified with the aid of 3-dimensional atom probe (3DAP) analysis, to compensate for the additional error resulted from the hardly distinguishable contrast of too short incomplete precipitates cut by the foil surface. The method can be performed on a regular foil specimen with a modern LaB{sub 6} or field-emission-gun transmission electron microscope. Precisions around ± 16% have been obtained for precipitate volume fractions of needle-like β″/C and Q precipitates in an aged Al-Mg-Si-Cu alloy. The measured number density is close to that directly obtained using 3DAP analysis by a misfit of 4.5%, and the estimated precision for number density measurement is about ± 11%. The limitations of the method are also discussed. - Highlights: •A facile method for measuring volume fraction of nano-precipitates based on CBED •An equation to compensate for small invisible precipitates, with 3DAP verification •Precisions around ± 16% for volume fraction and ± 11% for number density.

36 MATERIALS SCIENCE↗

Development of a microfocus x-ray tube with multiple excitation sources

A microfocus x-ray tube with multiple targets and an electron gun with a focal spot size of 10 {mu}m in diameter has been developed. The electron gun contains a LaB{sub 6} cathode and an Einzel lens. The x-ray tube can be operated at 50 W (50 kV, 1 mA) and has three targets, namely, Cr, W, and Rh on the anode that can be selected completely by moving the anode position. A focal spot size of 10 {mu}m in diameter can be achieved at 0.5 mA current. As demonstration of the usability of a multiexcitation x-ray tube, the fluorescence x-rays have been measured using a powder specimen mixed of TiO{sub 2}, Co, and Zr of the same quantity. The differences of excitation efficiency have clearly appeared according to the change in excitation source. From the results discussed here, it can be expected that the presented x-ray tube will be a powerful tool in microx-ray fluorescence spectrometers and various x-ray instruments.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Performance of a Compact Gamma Tube Interrogation Source

Active interrogation with high-energy monoenergetic gammas can induce photofission signals in fissile materials while minimizing absorbed radiation dose and background from surrounding materials. A first-generation axial-type gamma generator has been developed that utilizes the {sup 11}B(p,{gamma}){sup 12}C nuclear reaction at a 163 keV resonance to produce monoenergetic 12-MeV gamma-rays. The gamma tube employs a water-cooled cylindrical radio frequency (if) induction ion source capable of producing a proton current density of up to 100 mA/cm{sup 2}. The extracted proton beam bombards a lanthanum hexaboride (LaB{sub 6}) target at energies up to 200 keV. The 12-MeV gamma intensity was measured as a function of proton energy, beam current, and angle. Photofission-induced neutrons from depleted uranium (DU) were measured and compared to MCNPX calculations. After extended operation, the high power density of the proton beam was observed to cause damage to the LaB{sub 6} target and the gamma tube improvements currently being made to mitigate this damage are discussed.

07 ISOTOPE AND RADIATION SOURCES↗

Coaxial Mono-Energetic Gamma Generator for Active Interrogation

Compact mono-energetic photon sources are sought for active interrogation systems to detect shielded special nuclear materials in, for example, cargo containers, trucks and other vehicles. A prototype gamma interrogation source has been designed and built that utilizes the {sup 11}B(p,{gamma}){sup 12}C reaction to produce 12 MeV gamma-rays which are near the peak of the photofission cross section. In particular, the {sup 11}B(p,{gamma}){sup 12}C resonance at 163 kV allows the production of gammas at low proton acceleration voltages, thus keeping the design of a gamma generator comparatively small and simple. A coaxial design has been adopted with a toroidal-shaped plasma chamber surrounding a cylindrical gamma production target. The plasma discharge is driven by a 2 MHz rf-power supply (capable up to 50 kW) using a circular rf-antenna. Permanent magnets embedded in the walls of the plasma chamber generate a multi-cusp field that confines the plasma and allows higher plasma densities and lower gas pressures. About 100 proton beamlets are extracted through a slotted plasma electrode towards the target at the center of the device that is at a negative 180 kV. The target consists of LaB{sub 6} tiles that are brazed to a water-cooled cylindrical structure. The generator is designed to operate at 500 Hz with 20 {mu}s long pulses, and a 1% duty factor by pulsing the ion source rf-power. A first-generation coaxial gamma source has been built for low duty factor experiments and testing.

43 PARTICLE ACCELERATORS↗

Thermal Tests of Target Materials for Nuclear Reaction-Based Interrogation Sources

Compact active interrogation sources are being developed that use low-energy (kilovolt) nuclear reactions to produce high-energy (megavolt) neutrons or gamma-rays. We are evaluating target materials for these interrogation sources by performing rapid thermal load and high power density tests that reach conditions expected during source operation. Following the tests, the targets are analyzed with low and high resolution microscopes to assess whether any physical or structural damage has occurred. This paper presents results of the examinations of LiF, Li{sub 2}O, LiNbO{sub 3}, CaF{sub 2}, B{sub 4}C, and LaB{sub 6} target materials following rapid thermal and electron beam heating tests.

36 MATERIALS SCIENCE↗

Beamline I11 at Diamond: A new instrument for high resolution powder diffraction

The performance characteristics of a new synchrotron x-ray powder diffraction beamline (I11) at the Diamond Light Source are presented. Using an in-vacuum undulator for photon production and deploying simple x-ray optics centered around a double-crystal monochromator and a pair of harmonic rejection mirrors, a high brightness and low bandpass x-ray beam is delivered at the sample. To provide fast data collection, 45 Si(111) analyzing crystals and detectors are installed onto a large and high precision diffractometer. High resolution powder diffraction data from standard reference materials of Si, {alpha}-quartz, and LaB{sub 6} are used to characterize instrumental performance.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗