Search NASA⌕ Search

SEARCH · Search NASA

Results for “LANTHANUM OXIDES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2015

Enhancement of thermal shock resistance of reaction sintered mullite–zirconia composites in the presence of lanthanum oxide

Mullite–zirconia composites containing 20 wt.% zirconia were prepared by reaction sintering of zircon flour, sillimanite beach sand and calcined alumina. 0 to 8 mol% of La{sub 2}O{sub 3} with respect to zirconia was used as sintering aid. The effect of additive on the various physical, microstructures, mechanical and thermo-mechanical properties was studied. Quantitative phase analysis shows the change in tetragonal zirconia content with incorporation of lanthanum oxide. La{sub 2}O{sub 3} addition has significantly improved the thermal shock resistance of the samples. Samples without additive retained only 20% of initial flexural strength after 5 cycles, whereas samples containing 5 mol% La{sub 2}O{sub 3} retained almost 78% of its initial flexural strength even after 15 thermal shock cycles. - Highlights: • Mullite–zirconia composites were prepared by reaction sintering route utilizing zircon and sillimanite beach sand. • Lanthanum oxide was used as sintering aid. • The presence of lanthanum oxide decreased the densification temperature. • Lanthanum oxide significantly improved the thermal shock resistance of the composites.

36 MATERIALS SCIENCE↗
DOE OSTI2016

Angle resolved x-ray photoelectron spectroscopy (ARXPS) analysis of lanthanum oxide for micro-flexography printing

Micro-flexography printing was developed in patterning technique from micron to nano scale range to be used for graphic, electronic and bio-medical device on variable substrates. In this work, lanthanum oxide (La{sub 2}O{sub 3}) has been used as a rare earth metal candidate as depositing agent. This metal deposit was embedded on Carbon (C) and Silica (Si) wafer substrate using Magnetron Sputtering technique. The choose of Lanthanum as a target is due to its wide application in producing electronic devices such as thin film battery and printed circuit board. The La{sub 2}O{sub 3} deposited on the surface of Si wafer substrate was then analyzed using Angle Resolve X-Ray Photoelectron Spectroscopy (ARXPS). The position for each synthetic component in the narrow scan of Lanthanum (La) 3d and O 1s are referred to the electron binding energy (eV). The La 3d narrow scan revealed that the oxide species of this particular metal is mainly contributed by La{sub 2}O{sub 3} and La(OH){sub 3}. The information of oxygen species, O{sup 2-} component from O 1s narrow scan indicated that there are four types of species which are contributed from the bulk (O{sup 2−}), two chemisorb component (La{sub 2}O{sub 3}) and La(OH){sub 3} and physisorp component (OH). Here, it is proposed that from the adhesive and surface chemical properties of La, it is suitable as an alternative medium for micro-flexography printing technique in printing multiple fine solid lines at nano scale. Hence, this paper will describe the capability of this particular metal as rare earth metal for use in of micro-flexography printing practice. The review of other parameters contributing to print fine lines will also be described later.

36 MATERIALS SCIENCE↗
DOE OSTI2017

Hollow spherical Lanthanum oxide coated separator for high electrochemical performance lithium-sulfur batteries

Highlights: • Hollow spherical La{sub 2}O{sub 3} was fabricated by a spray dryer. • Hollow spherical La{sub 2}O{sub 3} was coated on the routine separator and equipped in Li-S battery. • La{sub 2}O{sub 3} coated layer can effectively trap lithium polysulfides and accelerate the electrochemical kinetics of the redox reactions. - Abstract: In order to alleviate the shuttle effects of lithium polysulfides (LiPSs) in Lithium sulfur batteries. Lanthanum oxide (La{sub 2}O{sub 3}) with a hollow spherical structure was synthesized by a spray dryer and coated on the routine separator evenly as the main coating material to trap LiPSs and accelerate the electrochemical kinetics of the redox reactions.CV tests and EIS analysis demonstrate that Li-S battery equipped with this modified separator shows higher discharge potential and faster electrochemical reaction in comparison with the routine separator and super P coated separator samples. Charge/discharge measurements at different current densities show that Li-S cell with the hollow spherical La{sub 2}O{sub 3} coated separator can deliver an initial capacity of 966 mA hg{sup −1} at 1C and maintains a discharge capacity of 720 mA hg{sup −1} after 200 cycles. Besides, it presents a high discharge capacity of 820 mA hg{sup −1} at 2C which demonstrates a promising rate performance.

36 MATERIALS SCIENCE↗
NASA NTRS2012

Fischer-Tropsch Cobalt Catalyst Improvements with the Presence of TiO2, La2O3, and ZrO2 on an Alumina Support

The objective of this study was to evaluate the effect of titanium oxide, lanthanum oxide, and zirconium oxide on alumina supported cobalt catalysts. The hypothesis was that the presence of lanthanum oxide, titanium oxide, and zirconium oxide would reduce the interaction between cobalt and the alumina support. This was of interest because an optimized weakened interaction could lead to the most advantageous cobalt dispersion, particle size, and reducibility. The presence of these oxides on the support were investigated using a wide range of characterization techniques such as SEM, nitrogen adsorption, x-ray diffraction (XRD), temperature programmed reduction (TPR), temperature programmed reduction after reduction (TPR-AR), and hydrogen chemisorptions/pulse reoxidation. Results indicated that both La2O3 and TiO2 doped supports facilitated the reduction of cobalt oxide species in reference to pure alumina supported cobalt catalysts, however further investigation is needed to determine the effect of ZrO2 on the reduction profile. Results showed an increased corrected cluster size for all three doped supported catalysts in comparison to their reference catalysts. The increase in reduction and an increase in the cluster size led to the conclusion that the support-metal interaction weakened by the addition of TiO2 and La2O3. It is also likely that the interaction decreased upon presence of ZrO2 on the alumina, but further research is necessary. Preliminary results have indicated that the alumina-supported catalysts with titanium oxide and lanthanum oxide present are of interest because of the weakened cobalt support interaction. These catalysts showed an increased extent of reduction, therefore more metallic cobalt is present on the support. However, whether or not there is more cobalt available to participate in the Fischer-Tropsch synthesis reaction (cobalt surface atoms) depends also on the cluster size. On one hand, increasing cluster size alone tends to decrease the active site density; on the other hand, by increasing the size of the cobalt clusters, there is less likelihood of forming oxidized cobalt complexes (cobalt aluminate) during Fischer-Tropsch synthesis. Thus, from the standpoint of stability, improving the extent of reduction while increasing the particle size slightly may be beneficial for maintaining the sites, even if there is a slight decrease in overall initial active site density.

Klettlinger, Jennifer Lindsey Suder↗
DOE OSTI2022

Stoichiometric metal nitration based novel green synthesis of mesoporous metal oxides and their enhanced heterogeneity

Here, in this work, a general and novel method for the green synthesis of mesoporous metal oxides via stoichiometric metal nitration has been demonstrated. Pluronic surfactants and their effect on synthesis procedures in terms of surface area have been experimentally studied in detail. Contrary to the traditional synthesis procedure, water has been utilized as the solvent and in several cases, such as tin oxide, manganese oxide, aluminum oxide, antimony oxide, zinc oxide, cobalt oxide, copper oxide, yttrium oxide, lanthanum oxide, and silver either the highest or comparable surface areas have been successfully synthesized. Through XRD, and TEM, all materials were observed to be crystalline except silver and magnesium oxide. SEM shows that with an increase in surfactant molar mass agglomeration decreases. Ammonia chemisorption on acidic materials gives quantitative amounts of ammonia chemical bonding with catalysts, whereas carbon dioxide chemisorption gives a quantitative value of CO 2 chemical binding with basic sites. As high as 1901.8 μmol/g and 994.6 μmol/g ammonia chemisorption values for oxides of vanadium and tin were achieved. Amphoteric materials give both acidic and basic enhanced adsorption. Finally, all synthesized materials are studied under organic catalytic transformations. Benzyl bromide is theoretically more active compared with benzylamine and benzyl alcohol which was also experimentally shown through the conversion.

36 MATERIALS SCIENCE↗
DOE OSTI2012

Electrocatalytic Properties of Nanocrystalline Calcium-Doped Lanthanum Cobalt Oxide for Bifunctional Oxygen Electrodes

Calcium-doped lanthanum cobalt oxide is a promising electrocatalyst for oxygen evolution and oxygen reduction in rechargeable metal air batteries and water electrolyzers operating with alkaline electrolyte. Nanocrystalline perovskite of composition La0.6Ca0.4CoO3 with a unique cellular internal structure was prepared at 350 degrees C and then annealed in air at progressively higher temperatures in the range of 600-750 degrees C. The samples were characterized by electrochemical techniques and X-ray photoelectron spectroscopy. The area-specific electrocatalytic activity for oxygen evolution/oxygen reduction, the oxidation state of cobalt, and the crystallite size increased with annealing temperature, while the Tafel slope remained constant. These trends provide new insights into the role of the cobalt center in oxygen evolution and oxygen reduction, and how preparation conditions can be altered to tune the activity of the cobalt center for electrocatalysis. We expect these findings to guide the design of electrocatalysts for bifunctional oxygen electrodes, in general.

Malkhandi, S↗
DOE OSTI2022

The effects of aluminum concentration on the microstructural and electrochemical properties of lithium lanthanum zirconium oxide

Cubic lithium lanthanum zirconium oxide (Li 7-x Al x La 3 Zr 2 O 12 , LLZO) garnet has gained attention as a promising next-generation electrolyte for lithium batteries due to its high ionic conductivity and chemical stability with lithium metal. The high conductivity can be achieved through doping over a range of aluminum concentrations. In this study, we hot-pressed samples to achieve <2% nominal porosity with aluminum concentrations from x = 0.25–0.55 mol to understand the effect of aluminum on microstructure and electrochemistry. It was observed that beyond the aluminum solubility limit (x = ~0.40), resistive secondary phases formed at the grain boundaries. As a result, the percent grain boundary resistance increased from 17.6 to 41.2% for x = 0.25 and x = 0.55, respectively. Both the grain boundary and bulk activation energies remained relatively constant as the aluminum concentrations increased (~0.44 eV and ~0.39 eV, respectively). It was, therefore, surmised that the mobility term of the Nernst–Einstein equation was roughly independent of aluminum concentration and the major variable controlling bulk conductivity was the number of lithium charge carriers. As a result, as the aluminum concentration increased from x = 0.25 to x = 0.55 the bulk conductivity decreased from 0.56 to 0.15 mS cm -1 . Following these trends of increasing grain boundary resistance and decreasing bulk conductivity with increasing aluminum concentration, x = 0.25 had the highest total conductivity (0.46 mS cm -1 ). We demonstrated that aluminum concentration has a significant effect on the microstructure and electrochemical properties of LLZO. In conclusion, we believe this work could help understand how to link processing, microstructure, and electrochemical properties to guide the manufacturing of LLZO for use in solid-state batteries.

25 ENERGY STORAGE↗
DOE OSTI2013

The impact of crystal symmetry on the electronic structure and functional properties of complex lanthanum chromium oxides

Complex oxides exhibit a wide range of crystal structures, chemical compositions and physical properties. The underlying drivers determining the complicated structure-composition-property phase diagrams are the relative positions and orbital overlaps between the metal cations and the oxygen anions. Here we report a combined experimental and theoretical investigation of the structure and bonding in a series of lanthanum chromium oxides prepared by reactive molecular beam epitaxy. Of particular interest is the charge state and local coordination of the Cr. We have stabilized LaCrO 3 , LaCrO 4 and La 2 CrO 6 films by controlling the three elemental fluxes during deposition, and have carried out x-ray diffraction, x-ray photoemission, and x-ray absorption spectroscopy, as well as first-principles calculations, to determine structure, charge state, chemical bonding, and electronic structure. Significant changes in bonding character and orbital interaction are revealed with decreasing ligand symmetry from octahedral to tetrahedral Cr coordination. Both LaCrO 4 and LaCrO 6 with tetrahedrally coordinated Cr show strong pre-edge features in the Cr K-edge near-edge structure whereas LaCrO 3 with octahedrally coordinated Cr exhibits very weak pre-edge features. The origin of these pre-edge features is discussed based on various selection rules and ligand symmetry. We also demonstrate an increase in cation-anion orbital hybridization and a decrease in long-range ligand coupling induced by this symmetry reduction. These in turn result in dramatic modifications of the macroscopic optical and magnetic properties.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2012

Methods and catalysts for making biodiesel from the transesterification and esterification of unrefined oils

A method of forming a biodiesel product and a heterogeneous catalyst system used to form said product that has a high tolerance for the presence of water and free fatty acids (FFA) in the oil feedstock is disclosed. This catalyst system may simultaneously catalyze both the esterification of FAA and the transesterification of triglycerides present in the oil feedstock. The catalyst system according to one aspect of the present disclosure represents a class of zinc and lanthanum oxide heterogeneous catalysts that include different ratios of zinc oxide to lanthanum oxides (Zn:La ratio) ranging from about 10:0 to 0:10. The Zn:La ratio in the catalyst is believed to have an effect on the number and reactivity of Lewis acid and base sites, as well as the transesterification of glycerides, the esterification of fatty acids, and the hydrolysis of glycerides and biodiesel.

09 BIOMASS FUELS↗
DOE OSTI2014

ZnO nanoparticle catalysts for use in biodiesel production and method of making

A method of forming a biodiesel product and a heterogeneous catalyst system used to form said product that has a high tolerance for the presence of water and free fatty acids (FFA) in the oil feedstock is disclosed. This catalyst system may simultaneously catalyze both the esterification of FAA and the transesterification of triglycerides present in the oil feedstock. The catalyst system is comprised of a mixture of zinc oxide and a second metal oxide. The zinc oxide includes a mixture of amorphous zinc oxide and zinc oxide nanocrystals, the zinc nanocrystals having a mean grain size between about 20 and 80 nanometers with at least one of the nanocrystals including a mesopore having a diameter of about 5 to 15 nanometers. Preferably, the second metal oxide is a lanthanum oxide, the lanthanum oxide being selected as one from the group of La.sub.2CO.sub.5, LaOOH, and combinations or mixtures thereof.

09 BIOMASS FUELS↗
DOE OSTI2022

Process for preparing doped lithium lanthanum zirconium oxide

A process for preparing doped-lithium lanthanum zirconium oxide (doped-LLZO) is described herein. The method involves dry doping of a co-precipitated lanthanum zirconium oxide (LZO) precursor. Dry doping is a process in which a dry powdered dopant is ground and mixed with a pre-prepared co-precipitated LZO precursor and a lithium salt to provide a LLZO precursor composition, which is subsequently calcined to form a doped-LLZO. The process described herein comprises calcining a dry, powdered (e.g., micron, sub-micron or nano-powdered) mixture of a co-precipitated LZO precursor, a dopant salt or oxide, and a lithium salt under an oxygen-containing atmosphere at a temperature in the range of about 500 to about 1100° C., and recovering the doped-LLZO after calcining.

Durham, Jessica L.↗
DOE OSTI2012

Synthesis of lanthanum zirconium oxide nanomaterials through composite-hydroxide-mediated approach

Graphical abstract: Lanthanum zirconium oxide (La{sub 2}Zr{sub 2}O{sub 7}) with cubic pyrochlore structure thermal barrier coatings (TBCs) materials have been synthesized through composite-hydroxide-mediated method at 200 Degree-Sign C. Compared with YSZ TBCs material, La{sub 2}Zr{sub 2}O{sub 7} showed more excellent thermal stability and lower thermal conductivity. Highlights: Black-Right-Pointing-Pointer La{sub 2}Zr{sub 2}O{sub 7} TBCs were synthesized through composite-hydroxide-mediated method. Black-Right-Pointing-Pointer The XRD patterns showed a single phase for La{sub 2}Zr{sub 2}O{sub 7} after treated at 1300 Degree-Sign C. Black-Right-Pointing-Pointer The thermal conductivity value of La{sub 2}Zr{sub 2}O{sub 7} was lower than that of YSZ. Black-Right-Pointing-Pointer La{sub 2}Zr{sub 2}O{sub 7} showed more excellent stability and lower thermal conductivity than YSZ. -- Abstract: A novel thermal barrier coating material, lanthanum zirconium oxide (La{sub 2}Zr{sub 2}O{sub 7}) has been synthesized through the composite-hydroxide-mediated method at low temperature. The phase structures, morphology, thermal stability and thermal conductivity of the as-synthesized La{sub 2}Zr{sub 2}O{sub 7} were investigated systematically. The X-ray diffraction (XRD) patterns revealed a single phase with cubic pyrochlore structure for La{sub 2}Zr{sub 2}O{sub 7} after treated at 1300 Degree-Sign C for 100 h. The transmission electron microscope (TEM) and scanning electron microscope (SEM) analyses showed that the sample was made up of sphere-like nanoparticles with the size between 50 and 100 nm. Furthermore, the thermal analysis result demonstrated the La{sub 2}Zr{sub 2}O{sub 7} sample had high thermal stability even at 1300 Degree-Sign C. As the temperature increased to 1200 Degree-Sign C, the thermal conductivity value could be as low as 1.75 W m{sup -1} K{sup -1}. Due to the high-temperature stability and lower thermal conductivity, the La{sub 2}Zr{sub 2}O{sub 7} material is expected to be a promising candidate for the use of thermal barrier coatings.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Irreversible Multielement Diffusion and the Resulting Compositional and Processing Flexibility in the Synthesis and Densification of Lithium Aluminum Lanthanum Zirconium Oxide

Despite the broad interest in Al-doped lithium lanthanum zirconium oxide (LLZO), the wide range of reported ionic conductivities suggests that the effect of processing parameters on the resulting phase purity and bulk conductivity is not well-understood. Here, in this work, we synthesized six separate series of LLZO with variations in Al concentration, Li excess, Li addition order, Li source, densification method, and mother powder to determine the effect on the composition, phase purity, density, and bulk conductivity. We found that a wider range of compositions (6.08–7.61 mol of Li and 0.06–0.23 mol of Al) than previously reported can result in cubic phase stability and that nearly all elements (Li, Al, Zr, and La) are lost to the MgO crucible during calcination and sintering. The manner in which different elements are lost is affected by the processing parameters. We observed that Al-doped LLZO shows great compositional flexibility in stabilizing the cubic phase, offering an explanation for the range of electrochemical performance metrics reported in the literature.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2016

Balancing surface adsorption and diffusion of lithium-polysulfides on nonconductive oxides for lithium–sulfur battery design

Lithium–sulfur batteries have attracted attention due to their six-fold specific energy compared with conventional lithium-ion batteries. Dissolution of lithium polysulfides, volume expansion of sulfur and uncontrollable deposition of lithium sulfide are three of the main challenges for this technology. State-of-the-art sulfur cathodes based on metal-oxide nanostructures can suppress the shuttle-effect and enable controlled lithium sulfide deposition. However, a clear mechanistic understanding and corresponding selection criteria for the oxides are still lacking. Herein, various nonconductive metal-oxide nanoparticle-decorated carbon flakes are synthesized via a facile biotemplating method. The cathodes based on magnesium oxide, cerium oxide and lanthanum oxide show enhanced cycling performance. Adsorption experiments and theoretical calculations reveal that polysulfide capture by the oxides is via monolayered chemisorption. Moreover, we show that better surface diffusion leads to higher deposition efficiency of sulfide species on electrodes. Lastly, oxide selection is proposed to balance optimization between sulfide-adsorption and diffusion on the oxides.

25 ENERGY STORAGE↗
DOE OSTI2019

Catalysts for conversion of 2,3-butanediol-containing fermentation mixture to hydrocarbons

A method for producing one or more hydrocarbon compounds from at least one of 2,3-butanediol, acetoin, and ethanol, the method comprising contacting said at least one of 2,3-butanediol, acetoin, and ethanol with a catalyst at a temperature of at least 100° C. and up to 500° C. to result in said 2,3-butanediol, acetoin, and/or ethanol being converted to said one or more hydrocarbon compounds, wherein said catalyst is either: (i) a catalyst comprising nanoparticles composed of (a) a first metal oxide selected from the group consisting of zirconium oxide, cerium oxide, titanium oxide, and lanthanum oxide, and (b) a main group metal oxide; or (ii) a catalyst comprising a zeolite loaded with at least one metal selected from the group consisting of copper, silver, nickel, palladium, platinum, rhodium, and ruthenium in an amount of 1-30 wt % by weight of the zeolite.

09 BIOMASS FUELS↗
DOE OSTI2026

Formation of Non-Doped Cubic Lithium Lanthanum Zirconium Oxide Nanofibers: Insights from In Situ Synchrotron X-Ray Scattering

This study investigates the formation mechanism of non-doped cubic lithium lanthanum zirconium oxide (c-LLZO) nanofibers using in situ synchrotron X-ray scattering techniques. Electrospun polymer precursor nanofibers were annealed at temperatures up to 800 °C, enabling real-time tracking of phase transitions via simultaneous small-angle X-ray scattering (SAXS), wide-angle X-ray scattering (WAXS), and evolved CO 2 gas analysis. The results reveal a three-step transformation pathway: polymer decomposition, formation of La 2 Zr 2 O 7 (LZO), and direct conversion of LZO to c-LLZO without intermediate tetragonal phases detected within the sensitivity of our in situ WAXS measurement. Cryo-electron energy loss spectroscopy (EELS) further elucidates the role of lithium diffusion, showing Li enrichment at fiber surfaces and Li deficiency in the interior, which stabilizes the cubic phase. This Li segregation effect in nanostructured LLZO materials extends beyond the previously reported size effect. This work advances the understanding of c-LLZO formation mechanisms and provides practical insights for optimizing synthesis routes to achieve phase-pure c-LLZO for solid-state battery applications.

LLZO phase stability↗
NASA NTRS1974

Some metal-graphite and metal-ceramic composites for use as high energy brake lining materials

Materials were studied as candidates for development as potential new aircraft brake lining materials. These families were (1) copper-graphite composites; (2) nickel-graphite composites; (3) copper - rare-earth-oxide (gadolinium oxide (Gd2O3) or lanthanum oxide (La2O3)) composites and copper - rare-earth-oxide (La2O3) - rare-earth-fluoride (lanthanum fluoride (LaF3)) composites; (4) nickel - rare-earth-oxide composites and nickel - rare-earth-oxide - rare-earth-fluoride composites. For comparison purposes, a currently used metal-ceramic composite was also studied. Results showed that the nickel-Gd2O3 and nickel-La2O3-LaF3 composites were comparable or superior in friction and wear performance to the currently used composite and therefore deserve to be considered for further development.

Bill, R. C.↗