Search NASA⌕ Search

SEARCH · Search NASA

Results for “LEAD 182”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

15 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2015

Nuclear Data Sheets for A = 182

Nuclear spectroscopic information for known nuclides of mass number 182 (Yb,Lu,Hf,Ta,W,Re,Os,Ir,Pt,Au, Hg,Tl,Pb) with Z=70 to 82 and N=112 to 100 have been evaluated and presented together with adopted energies and Jπ of levels in these nuclei. No excited state data are yet available for {sup 182}Y and {sup 182}Lu, while only limited structure information is available for {sup 182}Pb and {sup 182}Tl. Rotational band structures are known for {sup 182}Hg and {sup 182}Au but spin–parity assignments remain largely tentative. The decays of {sup 182}Lu, {sup 182}Hg, {sup 182}Au and {sup 182}Tl are not well established. The {sup 182}Hf isotope is of geophysical and astrophysical interest. This evaluation supersedes previous full evaluations of A = 182 published by 2010Si13, 1988Fi05 and 1975Sc13, and a selected (mainly high–spin) update of A = 182 published by 1995Si04. Only the Adopted properties of levels and gamma rays are presented in NDS, consult the ENSDF database at (www.nndc.bnl.gov/ensdf/) for details of individual reaction and decay datasets.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2017

Tungsten isotopes and the origin of the Moon

Here, the giant impact model of lunar origin predicts that the Moon mainly consists of impactor material. As a result, the Moon is expected to be isotopically distinct from the Earth, but it is not. To account for this unexpected isotopic similarity of the Earth and Moon, several solutions have been proposed, including (i) post-giant impact Earth–Moon equilibration, (ii) alternative models that make the Moon predominantly out of proto-Earth mantle, and (iii) formation of the Earth and Moon from an isotopically homogeneous disk reservoir. Here we use W isotope systematics of lunar samples to distinguish between these scenarios. We report high-precision 182 W data for several low-Ti and high-Ti mare basalts, as well as for Mg-suite sample 77215, and lunar meteorite Kalahari 009, which complement data previously obtained for KREEP-rich samples. In addition, we utilize high-precision Hf isotope and Ta/W ratio measurements to empirically quantify the superimposed effects of secondary neutron capture on measured 182 W compositions. Our results demonstrate that there are no resolvable radiogenic 182 W variations within the Moon, implying that the Moon differentiated later than 70 Ma after Solar System formation. In addition, we find that samples derived from different lunar sources have indistinguishable 182 W excesses, confirming that the Moon is characterized by a small, uniform ~+26 parts-per-million excess in 182 W over the present-day bulk silicate Earth. This 182W excess is most likely caused by disproportional late accretion to the Earth and Moon, and after considering this effect, the pre-late veneer bulk silicate Earth and the Moon have indistinguishable 182 W compositions. Mixing calculations demonstrate that this Earth–Moon 182 W similarity is an unlikely outcome of the giant impact, which regardless of the amount of impactor material incorporated into the Moon should have generated a significant 182 W excess in the Moon. Consequently, our results imply that post-giant impact processes might have modified 182 W, leading to the similar 182 W compositions of the pre-late veneer Earth's mantle and the Moon.

58 GEOSCIENCES↗
DOE OSTI2019

The Annual Phenomenology Symposia (Final Report)

PITT PACC once again successfully held the 3-day “Phenomenology 2019 Symposium”, during May 6-8, 2019. There were 296 registrants from 28 States, 20 countries. The high-quality plenary program brought the participants to the most updated cutting-edge research by the world leading experts in particle physics, astro-particle physics and cosmology. The 182 talks in the parallel sessions offer a great forum for presenting specific research results, especially for students and postdocs. A special career development forum was held for the 150 student participants. Pheno 2020 will take place during May 4-6, 2020, and the preparation is under way.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2019

Phase Transitions in Lead Hafnate under High Pressure

The effect of hydrostatic pressure on phase transitions in lead hafnate (PbHfO{sub 3}) has been studied by the methods of X-ray diffraction and X-ray diffuse scattering. The measurements were performed in the temperature range of 182 < T < 316°C and the pressure range of 1.6 < P < 2.6 GPa. Four regions characterized by different X-ray diffraction patterns and corresponding to an antiferroelectric phase, phases with a long-wavelength modulation of the lead sublattice, and phases with different distortions of the oxygen sublattice are identified. In the temperature region immediately above the region of phases with a long-wavelength modulation, a temperature-dependent maximum in the distribution of diffuse scattering was detected, which means that such a modulation is formed due to condensation of an incommensurate soft mode.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2019

Understanding the role of Zn 2+ in surfactant-free layered silicate delamination: Exfoliation of magadiite

Here we investigated the effect of Zn 2+ treatment on the exfoliation of layered silicate magadiite, as a model system, to better understand the role of zinc in surfactant-free zeolite exfoliation. Samples of magadiite and ball-milled magadiite were exfoliated via treatment with aqueous Zn(NO 3 ) 2 solution, and the resulting materials were characterized via powder X-ray diffraction, nitrogen physisorption, high-angle annular dark-field scanning transmission electron microscopy, and infrared spectroscopy. Zn 2+ treatment of magadiite increases its external surface area by 40%, while Zn 2+ treatment of ball-milled magadiite increases its external surface area by 109%. Acid-washing removes Zn(O) x (OH) y colloids and further increases external surface area, leading to a total surface area increase of 150% for magadiite after Zn 2+ treatment and acid-washing, and 182% for ball-milled magadiite after Zn 2+ treatment and acid-washing, by exposing surface area that was not accessible after Zn 2+ treatment due to pore blocking. We propose a mechanism of exfoliation to account for these surface-area increases, which involves the Zn(O) x (OH) y colloids growing and forcing layers apart selectively at the grain boundaries. Ball milling not only makes existing grain boundaries more accessible, but it also creates new grain boundaries, resulting in more efficient exfoliation.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Fundamental Insight into Zr Modification of Li- and Mn-Rich Cathodes: Combined Transmission Eelctron Microscopy and Electrochemical Impedance Spectroscopy Study

Zr surface modification was performed on Li- and Mn-rich (LMR) cathode material (Li1.2Ni0.13Co0.13Mn0.54O2) to suppress the detrimental phase transformation upon cycling and enhance its electrochemical performance. Using a wet chemical method, a Zr-based rock-salt layer with a thickness of 1~2 nm was formed on the surface of the LMR. Controlled studies reveal that the Zr-based layers can effectively suppress the phase transformation, leading to an enhanced long-term cycling performance and rate capability. At C/3, the Zr-modified LMR material was found to deliver an initial discharge specific capacity of 211 mAh g-1, and maintain a capacity of 182 mAh g-1 after 100 cycles. Even at high rates of 1, 2 and 3C, it still displays high discharge capacities of 178, 156 and 143 mAh g-1, respectively. This work reports for the first time the detailed mechanisms at atomic scale of how Zr modification can be effectively used to tailor the surface microstructures of high energy cathode materials to improve their long-term stability and cycle life.

Li- and Mn-rich cathode, Li1.2Ni0.13Co0.13Mn0.54O2↗
DOE OSTI2020

Alterations in Progesterone Receptor Isoform Balance in Normal and Neoplastic Breast Cells Modulates the Stem Cell Population

To investigate the role of PR isoforms on the homeostasis of stem cells in the normal and neoplastic mammary gland, we used PRA and PRB transgenic mice and the T47D human breast cancer cell line and its derivatives, T47D YA and YB (manipulated to express only PRA or PRB, respectively). Flow cytometry and mammosphere assays revealed that in murine breast, overexpression of PRB leads to an increase in luminal and basal progenitor/stem cells. Ovariectomy had a negative impact on the luminal compartment and induced an increase in mammosphere-forming capacity in cells derived from WT and PRA mice only. Treatment with ICI 182,780 augmented the mammosphere-forming capacity of cells isolated from WT and PRA mice, whilst those from PRB remained unaltered. T47D YB cells showed an increase in the CD44+/CD24Low/- subpopulation; however, the number of tumorspheres did not vary relative to T47D and YA, even though they were larger, more irregular, and had increased clonogenic capacity. T47D and YA tumorspheres were modulated by estrogen/antiestrogens, whereas YB spheres remained unchanged in size and number. Our results show that alterations in PR isoform balance have an impact on normal and tumorigenic breast progenitor/stem cells and suggest a key role for the B isoform, with implications in response to antiestrogens.

stem cells↗
DOE OSTI2021

Steric Effect Tuned Ion Solvation Enabling Stable Cycling of High-Voltage Lithium Metal Battery

1,2-Dimethoxyethane (DME) is a common electrolyte solvent for lithium metal batteries. Various DME-based electrolyte designs have improved long-term cyclability of high-voltage full cells. However, insufficient Coulombic efficiency at the Li anode and poor high-voltage stability remain a challenge for DME electrolytes. Here, we report a molecular design principle that utilizes a steric hindrance effect to tune the solvation structures of Li + ions. In this work, we hypothesized that by substituting the methoxy groups on DME with larger-sized ethoxy groups, the resulting 1,2-diethoxyethane (DEE) should have a weaker solvation ability and consequently more anion-rich inner solvation shells, both of which enhance interfacial stability at the cathode and anode. Experimental and computational evidence indicates such steric-effect-based design leads to an appreciable improvement in electrochemical stability of lithium bis(fluorosulfonyl)imide (LiFSI)/DEE electrolytes. Under stringent full-cell conditions of 4.8 mAh cm –2 NMC811, 50 μm thin Li, and high cutoff voltage at 4.4 V, 4 M LiFSI/DEE enabled 182 cycles until 80% capacity retention while 4 M LiFSI/DME only achieved 94 cycles. This work points out a promising path toward the molecular design of non-fluorinated ether-based electrolyte solvents for practical high-voltage Li metal batteries.

25 ENERGY STORAGE↗
DOE OSTI2021

Synthesis of Yttrium Superhydride Superconductor with a Transition Temperature up to 262 K by Catalytic Hydrogenation at High Pressures

The recent observation of room-temperature superconductivity will undoubtedly lead to a surge in the discovery of new, dense, hydrogen-rich materials. The rare earth metal superhydrides are predicted to have very high-T c superconductivity that is tunable with changes in stoichiometry or doping. Here we report the synthesis of an yttrium superhydride that exhibits superconductivity at a critical temperature of 262 K at 182±8 GPa. A palladium thin film assists the synthesis by protecting the sputtered yttrium from oxidation and promoting subsequent hydrogenation. Phonon-mediated superconductivity is established by the observation of zero resistance, an isotope effect and the reduction of T c under an external magnetic field. Furthermore, the upper critical magnetic field is 103 T at zero temperature.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Processing and properties of hafnium-doped tin-modified lead zirconate titanate 95/5 ceramics

Niobium (Nb)-doped lead-tin-zirconate-titanate (PSZT) ceramics near the lead-zirconate-titanate 95/5 orthorhombic AFE-rhombohedral FE morphotropic phase boundary (PSZT 13.5/81/5.5 -1.6Nb) were prepared with up to 10 mol.% of hafnium (Hf) substituted for zirconium. The ceramics were prepared by a traditional solid-state synthesis route and sintered to near full density at 1150°C for 6 h in sealed alumina crucibles with self-same material as the lead vapor source. All compositions were ~98% dense with no detectable secondary phases by X-ray diffraction. The grain size was ~3 μm for all compositions, consisting of equiaxed grains with intergranular porosity. The compositions exhibited remnant polarization values of ~32 μC/cm 2 . Depolarization by the hydrostatic pressure-induced FE-AFE phase transition occurred at 310 MPa for all compositions, resulting in a total depolarization output of 32.4 μC/cm 2 for the PSZT ceramics. Evaluation of the R3c-R3m and R3m-Pm $\bar{3}$ m phase transition temperatures by impedance spectroscopy showed temperatures on heating ranging from 86 to 92°C and 186 to 182°C, respectively, for increasing nominal Hf content. Thermal hysteresis of the phase transitions was also observed in the ceramics, with the transition temperature on cooling being 1–4°C lower. The study demonstrated that the PSZT ceramics are relatively insensitive to variations in Hf content in the range of 0 to 10 mol.%.

36 MATERIALS SCIENCE↗
DOE OSTI2016

Directional solidification of aqueous TiO 2 suspensions under reduced gravity

Porous materials exhibiting aligned, elongated pore structures can be created by directional solidification of aqueous suspensions—where particles are rejected from a propagating ice front and form interdendritic, particle-packed walls—followed by sublimation of the ice, and sintering of the particle walls. Theoretical models that predict dendritic lamellae spacing—and thus wall and pore width in the final materials—are currently limited due to an inability to account for gravity-driven convective effects during solidification. In this work, aqueous suspensions of 10–30 nm TiO 2 nanoparticles are solidified on parabolic flights under micro-, lunar (~0.17 g; g l = 1.62 m/s 2 ), and Martian (~0.38 g; g m = 3.71 m/s 2 ) gravity and compared to terrestrially-solidified samples. After ice sublimation and sintering, all resulting TiO 2 materials exhibit elongated lamellar pores replicating the ice dendrites. Furthermore, increasing the TiO 2 fraction in the suspensions leads to decreased lamellar spacing in all samples, regardless of gravitational acceleration. Consistent with previous studies of microgravity solidification of binary metallic alloys, lamellar spacing decreases with increasing gravitational acceleration. Furthermore, mean lamellar spacing for 20 wt% TiO 2 nanoparticles suspensions under micro-, lunar, Martian, and terrestrial gravity are, respectively: 50 ± 8, 34 ± 11, 30 ± 6, and 23 ± 9 μm, indicating that gravity-driven convection strongly affects lamellae spacing under terrestrial gravity conditions. Gravitational effects on lamellar spacing are highest at low TiO 2 fractions in the suspension; for 5 wt% TiO 2 suspensions, the microgravity lamellar spacing is more than twice that under terrestrial gravity (182 ± 21 vs. 81 ± 23 μm). Results of this study are in good agreement with previous studies of binary metallic alloy solidification where primary dendrite spacing increases under microgravity. Additionally, literature data from ice-templating systems are used to discuss a dependence on lamellae spacing of the density ratio of particles and fluid.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Intensity of sample processing methods impacts wastewater SARS-CoV-2 whole genome amplicon sequencing outcomes

Wastewater SARS-CoV-2 surveillance has been deployed since the beginning of the COVID-19 pandemic to monitor the dynamics in virus burden in local communities. Genomic surveillance of SARS-CoV-2 in wastewater, particularly efforts aimed at whole genome sequencing for variant tracking and identification, are still challenging due to low target concentration, complex microbial and chemical background, and lack of robust nucleic acid recovery experimental procedures. The intrinsic sample limitations are inherent to wastewater and are thus unavoidable. Here, we use a statistical approach that couples correlation analyses to a random forest-based machine learning algorithm to evaluate potentially important factors associated with wastewater SARS-CoV-2 whole genome amplicon sequencing outcomes, with a specific focus on the breadth of genome coverage. We collected 182 composite and grab wastewater samples from the Chicago area between November 2020 to October 2021. Samples were processed using a mixture of processing methods reflecting different homogenization intensities (HA + Zymo beads, HA + glass beads, and Nanotrap), and were sequenced using one of the two library preparation kits (the Illumina COVIDseq kit and the QIAseq DIRECT kit). Technical factors evaluated using statistical and machine learning approaches include sample types, certain sample intrinsic features, and processing and sequencing methods. The results suggested that sample processing methods could be a predominant factor affecting sequencing outcomes, and library preparation kits was considered a minor factor. Finally, a synthetic SARS-CoV-2 RNA spike-in experiment was performed to validate the impact from processing methods and suggested that the intensity of the processing methods could lead to different RNA fragmentation

60 APPLIED LIFE SCIENCES↗
DOE OSTI2016

Isoliquiritigenin exhibits anti-proliferative properties in the pituitary independent of estrogen receptor function

The plant flavonoid isoliquiritigenin (ISL) is a botanical estrogen widely taken as an herbal supplement to ease the symptoms of menopause. ISL has been also shown to have anti-tumor properties in a number of cancer cell backgrounds. However, the effects of ISL on normal cells are less well known and virtually unstudied in the context of the pituitary gland. We have established a pituitary explant culture model to screen chemical agents for gene expression changes within the pituitary gland during a period of active proliferation and differentiation. Using this whole-organ culture system we found ISL to be weakly estrogenic based on its ability to induce Cckar mRNA expression, an estrogen receptor (ER) mediated gene. Using a range of ISL from 200 nM to 200 μM, we discovered that ISL promoted cell proliferation at a low concentration, yet potently inhibited proliferation at the highest concentration. ICI 182,780 failed to antagonize ISL's repression of pituitary cell proliferation, indicating the effect is independent of ER signaling. Coincident with a decrease in proliferating cells, we observed down-regulation of transcript for cyclin D2 and E2 and a strong induction of mRNA and protein for the cyclin dependent kinase inhibitor Cdkn1a (p21). Importantly, high dose ISL did not alter the balance of progenitor vs. differentiated cell types within the pituitary explants and they seemed otherwise healthy; however, TUNEL staining revealed an increase in apoptotic cell death in ISL treated cultures. Our results merit further examination of ISL as an anti-tumor agent in the pituitary gland. - Highlights: • Isoliquiritigenin possesses weak estrogenic activity based on induction of Cckar. • ISL can be anti-proliferative in pituitary explants without altering cell lineages. • Anti-proliferative behavior of ISL is not estrogen receptor mediated. • ISL induces p21 expression leading to cell cycle arrest and apoptosis.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2016

SU-F-T-182: A Stochastic Approach to Daily QA Tolerances On Spot Properties for Proton Pencil Beam Scanning

Purpose: Proton pencil beam scanning is used clinically across the United States. There are no current guidelines on tolerances for daily QA specific to pencil beam scanning, specifically related to the individual spot properties (spot width). Using a stochastic method to determine tolerances has the potential to optimize tolerances on individual spots and decrease the number of false positive failures in daily QA. Individual and global spot tolerances were evaluated. Methods: As part of daily QA for proton pencil beam scanning, a field of 16 spots (corresponding to 8 energies) is measured using an array of ion chambers (Matrixx, IBA). Each individual spot is fit to two Gaussian functions (x,y). The spot width (σ) in × and y are recorded (32 parameters). Results from the daily QA were retrospectively analyzed for 100 days of data. The deviations of the spot widths were histogrammed and fit to a Gaussian function. The stochastic spot tolerance was taken to be the mean ± 3σ. Using these results, tolerances were developed and tested against known deviations in spot width. Results: The individual spot tolerances derived with the stochastic method decreased in 30/32 instances. Using the previous tolerances (± 20% width), the daily QA would have detected 0/20 days of the deviation. Using a tolerance of any 6 spots failing the stochastic tolerance, 18/20 days of the deviation would have been detected. Conclusion: Using a stochastic method we have been able to decrease daily tolerances on the spot widths for 30/32 spot widths measured. The stochastic tolerances can lead to detection of deviations that previously would have been picked up on monthly QA and missed by daily QA. This method could be easily extended for evaluation of other QA parameters in proton spot scanning.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2016

High-pressure polymorphism of Pb F 2 to 75 GPa

Lead fluoride, PbF 2 , was investigated experimentally in the laser-heated diamond anvil cell by x-ray diffraction to pressures of 75 GPa at room temperature and to 64.5 GPa and 2430 K, as well as through first-principles density functional theory calculations up to 70 GPa. During room temperature compression, no discontinuous changes in the x-ray diffraction pattern or volume were observed, but the lattice parameters displayed highly anomalous trends between 10-22 GPa with enhanced compressibility along the a direction and reduced or even negative compressibility along b and c. Theoretical calculations of valence electron densities at 22 GPa showed that α-PbF 2 underwent a pressure-induced isosymmetric phase transition to a postcotunnite Co 2 Si structure and also revealed the detailed atomic rearrangements associated with the development of an extra Pb-F bond in the high-pressure phase. Our x-ray results and theoretical calculations are consistent with an isosymmetric phase transition smoothly occurring over 10-22 GPa rather than abruptly as previously suggested. The characteristic values for the cell constants a/c and (a+c)/b, which are used to distinguish among cotunnite-, Co 2 Si-, and Ni 2 In-type phases, require modification based on our results. An equation of state fit yields a bulk modulus, K 0 , of 72(3) GPa for the cotunnite-type, and an ambient-pressure volume, V 0 , of 182(2)Å 3 , and K 0 =81(4)GPa for the Co 2 Si-type phase when fixing the pressure derivative of the bulk modulus, K 0 '=4. Upon heating above 1200 K at pressures at or above 25.9 GPa, PbF 2 partially transformed to the hexagonal Ni 2 In-type phase but wholly or partially reverted back to Co 2 Si-type phase upon temperature quench. From 43-65 GPa, nearly complete transformation to the Ni 2 In-type PbF 2 was observed at high temperature, but the material partially transformed back to the orthorhombic phase upon temperature quench. Our results show that high-pressure behavior of PbF 2 is distinct from that of the alkaline earth fluorides with similar ionic radii. These results also have relevance to understanding the behavior of lanthanide and actinide dioxides, which have been predicted theoretically to exhibit similar isosymmetric transitions at Mbar pressures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗