Search NASA⌕ Search

SEARCH · Search NASA

Results for “LEAD 202”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Nuclear Data Sheets for A = 202

Evaluated nuclear structure and decay data for all nuclei within the A = 202 mass chain are presented. This work supersedes the earlier evaluation by M.R. Schmorak (1997Sc07), published in Nuclear Data Sheets80, 647 (1997)

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Crystal Structure of a Novel Dimeric Form of NS5A Domain I Protein from Hepatitis C Virus

A new protein expression vector design utilizing an N-terminal six-histidine tag and tobacco etch virus protease cleavage site upstream of the hepatitis C virus NS5A sequence has resulted in a more straightforward purification method and improved yields of purified NS5A domain I protein. High-resolution diffracting crystals of NS5A domain I (amino acids 33 to 202) [NS5A(33-202)] were obtained by using detergent additive crystallization screens, leading to the structure of a homodimer which is organized differently from that published previously (T. L. Tellinghuisen, J. Marcotrigiano, and C. M. Rice, Nature 435:374-379, 2005) yet is consistent with a membrane association model for NS5A. The monomer-monomer interface of NS5A(33-202) features an extensive buried surface area involving the most-highly conserved face of each monomer. The two alternate structural forms of domain I now available may be indicative of the multiple roles emerging for NS5A in viral RNA replication and viral particle assembly.

36 MATERIALS SCIENCE↗

Double hysteresis loop induced by defect dipoles in ferroelectric Pb(Zr{sub 0.8}Ti{sub 0.2})O{sub 3} thin films

Pb(Zr{sub 0.8}Ti{sub 0.2})O{sub 3} (PZT80/20) thin films were deposited on the Pt(111)/Ti/SiO{sub 2}/Si(100) substrates by RF magnetron sputtering. Mainly perovskite crystalline phase with highly (202)-preferred orientation, determined by x-ray diffraction, was formed in the lead zirconate titanate (PZT)(80/20) thin films. Polarization measurements of the unannealed and aged films showed a clear double hysteresis loop. However, the double hysteresis loop phenomenon was greatly suppressed in the PZT thin films annealed under pure oxygen, and thus they exhibited larger remnant polarization (P{sub r} = 6.3 {mu}C/cm{sup 2}). The related mechanism for the appearance of constricted and double hysteresis loops was investigated to be associated with the realignment and disassociation of defect dipoles via oxygen octahedral rotations or oxygen vacancy diffusion. The butterfly-shaped C-V characteristic curve with a valley gave further evidence for double hysteresis loop characteristic in the unannealed and aged PZT thin films.

36 MATERIALS SCIENCE↗

A GALACTIC MOLECULAR CLOUD CLUMP CATALOG FROM HI-GAL DATA: METHOD AND INITIAL RESULTS COMPARISON WITH BGPS

As the precursors to stellar clusters, it is imperative that we understand the distribution and physical properties of dense molecular gas clouds and clumps. Such a study has been done with the ground-based Bolocam Galactic Plane Survey (BGPS). Now the Herschel infrared GALactic plane survey (Hi-GAL) allows us to do the same with higher-quality data and complete coverage of the Galactic plane. We have made a pilot study comparing dense molecular gas clumps identified in Hi-GAL and BGPS, using six 2° × 2° regions centered at Galactic longitudes of ℓ=11{sup ∘}, 30°, 41°, 50°, 202°, and 217°. We adopted the BGPS methodology for identifying clumps and estimating distances, leading to 6198 clumps being identified in our substudy, with 995 of those having well-constrained distances. These objects were evenly distributed with Galactic longitude, a consequence of Hi-GAL being source confusion limited. These clumps range in mass from 10{sup −2} to 10{sup 5} M{sub ⊙} and have heliocentric distances of up to 16 kpc. When clumps found in both surveys are compared, we see that distances agree within 1 kpc and ratios of masses are of the order of unity. This serves as an external validation for BGPS and instills confidence as we move forward to cataloging the clumps from the entirety of Hi-GAL. In addition to the sources that were in common with BGPS, Hi-GAL found many additional sources, primarily due to the lack of atmospheric noise. We expect Hi-GAL to yield 2 × 10{sup 5} clumps, with 20% having well-constrained distances, an order of magnitude above what was found in BGPS.

79 ASTRONOMY AND ASTROPHYSICS↗

Emergent Epitaxial Configuration of Pr 3 IrO 7 Domains via YSZ (111) Substrate

The 5d rare Earth iridate is an intriguing material with exhibiting exotic electronic and magnetic phases due to spin-orbit coupled states. Ternary iridium oxides Ln 3 IrO 7 contain an unusual Ir 5+ (5d 4 ) system, which remain a subject of active research. Fabricating epitaxial Ln 3 IrO 7 films is challenging due to substrate compatibility, but it offers a valuable platform to explore electronic and magnetic behaviors under reduced dimensionality and substrate interactions, revealing novel phenomena based on Ir 5+ (5d 4 ). In this regard, this demonstrates that Pr 3 IrO 7 with its highly anisotropic orthorhombic structure can be epitaxially grown on a cubic (111)-oriented yttrium-stabilized ZrO 2 (YSZ) substrate. Pr 3 IrO 7 film exhibits six epitaxial domains, where the (220) and (202) planes aligning epitaxially to YSZ (111) with the threefold symmetry. This diverse domain configuration in Pr 3 IrO 7 film leads to unique magnetic properties, exhibiting spin-glass-like behavior. Pr 3 IrO 7 thin film offers a platform for exploring unconventional magnetic states, and their successful heteroepitaxy on YSZ substrates opens new avenues for discovering novel physical phenomena.

36 MATERIALS SCIENCE↗

WE-AB-202-04: Statistical Evaluation of Lung Function Using 4DCT Ventilation Imaging: Proton Therapy VS IMRT

Purpose: Variation in function of different lung regions has been ignored so far for conventional lung cancer treatment planning, which may lead to higher risk of radiation induced lung disease. 4DCT based lung ventilation imaging provides a novel yet convenient approach for lung functional imaging as 4DCT is taken as routine for lung cancer treatment. Our work aims to evaluate the impact of accounting for spatial heterogeneity in lung function using 4DCT based lung ventilation imaging for proton and IMRT plans. Methods: Six patients with advanced stage lung cancer of various tumor locations were retrospectively evaluated for the study. Proton and IMRT plans were designed following identical planning objective and constrains for each patient. Ventilation images were calculated from patients’ 4DCT using deformable image registration implemented by Velocity AI software based on Jacobian-metrics. Lung was delineated into two function level regions based on ventilation (low and high functional area). High functional region was defined as lung ventilation greater than 30%. Dose distribution and statistics in different lung function area was calculated for patients. Results: Variation in dosimetric statistics of different function lung region was observed between proton and IMRT plans. In all proton plans, high function lung regions receive lower maximum dose (100.2%–108.9%), compared with IMRT plans (106.4%–119.7%). Interestingly, three out of six proton plans gave higher mean dose by up to 2.2% than IMRT to high function lung region. Lower mean dose (lower by up to 14.1%) and maximum dose (lower by up to 9%) were observed in low function lung for proton plans. Conclusion: A systematic approach was developed to generate function lung ventilation imaging and use it to evaluate plans. This method hold great promise in function analysis of lung during planning. We are currently studying more subjects to evaluate this tool.

60 APPLIED LIFE SCIENCES↗

Neutron activation cross sections on lead isotopes

The cross sections for the reactions {sup 204}Pb(n,n{sup '}{gamma}){sup 204}Pb{sup m}, {sup 204}Pb(n,2n){sup 203}Pb, {sup 204}Pb(n,2n){sup 203}Pb{sup m1}, {sup 204}Pb(n,3n){sup 202}Pb{sup m}, {sup 206}Pb(n,3n){sup 204}Pb{sup m}, {sup 206}Pb(n,{alpha}){sup 203}Hg, and {sup 208}Pb(n,p){sup 208}Tl were determined at the IRMM van de Graaff laboratory in the neutron energy range from 14 to 21 MeV. Both natural and enriched samples were irradiated with neutrons produced via the {sup 3}H(d,n){sup 4}He reaction. The induced activities were determined by gamma-ray spectrometry using a HPGe detector in a low-background shield. Neutron fluences were determined with the well-known cross section of the {sup 27}Al(n,{alpha}){sup 24}Na reaction. Enriched samples were essential to determine the cross sections for the reactions with {sup 204}Pb{sup m} and {sup 206}Pb{sup m} isomers in the final state. Accurate results for reactions with {sup 204,206}Pb as target nuclei with natural lead samples were enabled through a precise measurement of the isotopic ratios. For a first investigation of the consequences of the present data for nuclear reaction models they were confronted with calculations based on global parameter systematics in a phenomenological and in a microscopic approach and with parameters selected to reproduce the available data. The TALYS code was used for the former two calculations involving parameter systematics while the STAPRE code was used for the latter calculation.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

A Budget Impact Model for Paclitaxel-eluting Stent in Femoropopliteal Disease in France

The Zilver PTX drug-eluting stent (Cook Ireland Ltd., Limerick, Ireland) represents an advance in endovascular treatments for atherosclerotic superficial femoral artery (SFA) disease. Clinical data demonstrate improved clinical outcomes compared to bare-metal stents (BMS). This analysis assessed the likely impact on the French public health care budget of introducing reimbursement for the Zilver PTX stent. A model was developed in Microsoft Excel to estimate the impact of a progressive transition from BMS to Zilver PTX over a 5-year horizon. The number of patients undergoing SFA stenting was estimated on the basis of hospital episode data. The analysis from the payer perspective used French reimbursement tariffs. Target lesion revascularization (TLR) after primary stent placement was the primary outcome. TLR rates were based on 2-year data from the Zilver PTX single-arm study (6 and 9 %) and BMS rates reported in the literature (average 16 and 22 %) and extrapolated to 5 years. Net budget impact was expressed as the difference in total costs (primary stenting and reinterventions) for a scenario where BMS is progressively replaced by Zilver PTX compared to a scenario of BMS only. The model estimated a net cumulative 5-year budget reduction of Euro-Sign 6,807,202 for a projected population of 82,316 patients (21,361 receiving Zilver PTX). Base case results were confirmed in sensitivity analyses. Adoption of Zilver PTX could lead to important savings for the French public health care payer. Despite higher initial reimbursement for the Zilver PTX stent, fewer expected SFA reinterventions after the primary stenting procedure result in net savings.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

The influence of intruder states in even-even Po isotopes

We study the role of intruder states and shape coexistence in the even-even {sup 190–206}Po isotopes, through an interacting boson model with configuration mixing calculation. We analyzed the results in the light of known systematics on various observable in the Pb region, paying special attention to the unperturbed energy systematics and quadrupole deformation. We find that shape coexistence in the Po isotopes behaves in very much the same way as in the Pt isotopes, i.e., it is somehow hidden, contrary to the situation in the Pb and the Hg isotopes.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Public Acceptance of Pre-Commercial Thinning and Energy and Soil Amendment Products from Post-Harvest Residues in Western Forests of the United States

Abstract . The goals of the Waste-to-Wisdom project is to produce bioenergy products and biochar from post-harvest forest residues and thus understanding public acceptance of the forest management and utilizing forest residues for biomass-based products is critical. This research explores the public perceptions of producing bioenergy products and biochar from forest thinning activities in the western Pacific Northwest region. A web-based survey was conducted in Washington, Oregon, and Northern California generating 1,202 responses. Multinomial regression techniques and simulation-based approach were applied to analyze how demographic and socio-economic factors influence public perceptions. People living in less populated areas are more likely to support forest thinning. Higher levels of education and household income also lead to higher levels of support for forest thinning. On the other hand, supports for forest thinning results in supports for using forest residuals to produce bioenergy products. These results suggest that different strategies are necessary to effectively communicate the environmental and ecological benefits of using forest residuals derived from forest thinning activities to produce biomass-based products. Keywords: Environmental Perceptions, Multinomial Logistic Regression, Natural Resource Management, Rural vs. Urban, Simulation-Based Approach.

Agriculture↗

Morphology and Mechanical, Corrosive, and Antibacterial Behaviors of Indirectly Extruded Zn-0.05wt.%Mg-(0.5, 1 wt.%)Ag Alloys

Biodegradable Zn-0.05Mg-(0.5, 1 wt.%) Ag alloy was manufactured by indirectly extruding the alloy ingot at 200 °C with an extrusion ratio of 16:1. Dynamic recrystallization took place during the extrusion process, leading to the formation of equiaxed crystals with twins in both cross-sectional and longitudinal direction. There was no detectable Ag-related phase present except the Mg{sub 2}Zn{sub 11} in the alloys. Tensile strength was increased with an increase in Ag content, reaching 202 MPa when Ag content is 1 wt.%. As-extruded Zn-0.05Mg-0.5Ag showed better corrosion performance with a low corrosion current density of 2.2 A/cm{sup 2} and low corrosion rate of 0.15 mm/year. The antibacterial property improved for both Staphylococcus aureus (S. aureus) and Escherichia coli (E. coli) by addition of Ag. The antibacterial rates were more than 99% when Ag content is up to 1 wt.%. The biodegradable Zn-Mg-Ag alloys with high antibacterial behavior show great potential in medical devices.

36 MATERIALS SCIENCE↗

D-atom products in predissociation of CD{sub 2}CD{sub 2}OH from the 202-215 nm photodissociation of 2-bromoethanol.

Experimental observations of D fragments from the predissociation of rovibrationally excited partially deuterated 2-hydroxyethyl radicals, CD{sub 2}CD{sub 2}OH, are reported, and possible dissociation channels are analyzed by theory. The radicals are produced by photolysis of 2-bromoethanol at 202-215 nm, and some of them have sufficient internal energy to predissociate. D fragments are detected by 1 + 1{prime} REMPI and their TOF distributions are determined. They can be associated with vinyl alcohol and/or acetaldehyde cofragments. From analysis of the maximum velocities and kinetic energies of the observed D fragments it is concluded that they originate from the decomposition of CD2CD2OH, but the experimental resolution is insufficient to distinguish between the two possible channels leading to D products. Theoretical analysis and RRKM calculations of microcanonical dissociation rates and branching ratios for the range of available excess energies (up to 5000-8000 cm{sup -1} above the OH + C{sub 2}D{sub 4} threshold) indicate that the D-producing channels are minor (about 1%) compared to the predominant OH + C{sub 2}D{sub 4} channel, and the branching ratio for D production is more favorable when the reactant radicals have low rotational energy. The vinyl alcohol channel is strongly favored over the acetaldehyde channel at all excess energies, except near the threshold of these channels.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Generation of Phaseolus vulgaris ESTs and investigation of their regulation upon Uromyces appendiculatus infection

Background: Phaseolus vulgaris (common bean) is the second most important legume crop in the world after soybean. Consequently, yield losses due to fungal infection, like Uromyces appendiculatus (bean rust), have strong consequences. Several resistant genes were identified that confer resistance to bean rust infection. However, the downstream genes and mechanisms involved in bean resistance to infection are poorly characterized. Results: A subtractive bean cDNA library composed of 10,581 unisequences was constructed and enriched in sequences regulated by either bean rust race 41, a virulent strain, or race 49, an avirulent strain on cultivar Early Gallatin carrying the resistance gene Ur-4. The construction of this library allowed the identification of 6,202 new bean ESTs, significantly adding to the available sequences for this plant. Regulation of selected bean genes in response to bean rust infection was confirmed by qRT-PCR. Plant gene expression was similar for both race 41 and 49 during the first 48 hours of the infection process but varied significantly at the later time points (72–96 hours after inoculation) mainly due to the presence of the Avr4 gene in the race 49 leading to a hypersensitive response in the bean plants. A biphasic pattern of gene expression was observed for several genes regulated in response to fungal infection. Conclusion: The enrichment of the public database with over 6,000 bean ESTs significantly adds to the genomic resources available for this important crop plant. The analysis of these genes in response to bean rust infection provides a foundation for further studies of the mechanism of fungal disease resistance. The expression pattern of 90 bean genes upon rust infection shares several features with other legumes infected by biotrophic fungi. This finding suggests that the P. vulgarisU. appendiculatus pathosystem could serve as a model to explore legume-rust interaction.

59 BASIC BIOLOGICAL SCIENCES↗

TH-AB-202-05: BEST IN PHYSICS (JOINT IMAGING-THERAPY): First Online Ultrasound-Guided MLC Tracking for Real-Time Motion Compensation in Radiotherapy

Purpose: While MLC tracking has been successfully used for motion compensation of moving targets, current real-time target localization methods rely on correlation models with x-ray imaging or implanted electromagnetic transponders rather than direct target visualization. In contrast, ultrasound imaging yields volumetric data in real-time (4D) without ionizing radiation. We report the first results of online 4D ultrasound-guided MLC tracking in a phantom. Methods: A real-time tracking framework was installed on a 4D ultrasound station (Vivid7 dimension, GE) and used to detect a 2mm spherical lead marker inside a water tank. The volumetric frame rate was 21.3Hz (47ms). The marker was rigidly attached to a motion stage programmed to reproduce nine tumor trajectories (five prostate, four lung). The 3D marker position from ultrasound was used for real-time MLC aperture adaption. The tracking system latency was measured and compensated by prediction for lung trajectories. To measure geometric accuracy, anterior and lateral conformal fields with 10cm circular aperture were delivered for each trajectory. The tracking error was measured as the difference between marker position and MLC aperture in continuous portal imaging. For dosimetric evaluation, 358° VMAT fields were delivered to a biplanar diode array dosimeter using the same trajectories. Dose measurements with and without MLC tracking were compared to a static reference dose using a 3%/3 mm γ-test. Results: The tracking system latency was 170ms. The mean root-mean-square tracking error was 1.01mm (0.75mm prostate, 1.33mm lung). Tracking reduced the mean γ-failure rate from 13.9% to 4.6% for prostate and from 21.8% to 0.6% for lung with high-modulation VMAT plans and from 5% (prostate) and 18% (lung) to 0% with low modulation. Conclusion: Real-time ultrasound tracking was successfully integrated with MLC tracking for the first time and showed similar accuracy and latency as other methods while holding the potential to measure target motion non-invasively. SI was supported by the Graduate School for Computing in Medicine and Life Science, German Excellence Initiative [grant DFG GSC 235/1].

60 APPLIED LIFE SCIENCES↗

Microstructure stability and micro-mechanical behavior of as-cast gamma-TiAl alloy during high-temperature low cycle fatigue

This paper systematically investigated the low cycle fatigue deformation of a high Nb-containing TiAl alloy with a nominal chemical composition of Ti-45Al-8.5Nb-0.2W-0.2B-0.02Y at 850 °C by using transmission electron microscopy (TEM), scanning electron microscopy (SEM), and synchrotron-based high-energy X-ray diffraction (HE-XRD) techniques. Cyclic stress-strain (CSS) behavior, lattice strain, and peak broadening of {100} α2 , {201} γ , and {202} ωo planes, phase transformations, and crack propagation behavior were obtained for samples with three total strain amplitudes: Δε t /2 = ±0.25%, Δε t /2 = ±0.28%, and Δε t /2 = ±0.30%. At early deformation stages, α 2lamellae transformed into ωo phase with a distinct orientation relationship, and a certain orientation relationship (OR) between them was observed after the following cyclic deformation. Furthermore, γ particles precipitated within the single ω o area. In addition, according to the peak intensity and peak broadening results, the ω o → B2 phase transformation occurred, leading to the appearance of single B2-phase areas. The lattice strains in the ω o phase were always in tension during the cyclic deformation and large differences of the lattice strains were found in the γ phase and α 2 phase, not only the values but also the directions, which resulted in crack nucleated at and propagated along the α 2 /γ lamellar interface. Finally, this study provides a better understanding of the low cycle fatigue deformation of TiAl alloys.

36 MATERIALS SCIENCE↗

Effects of deposition parameters on tantalum films deposited by direct current magnetron sputtering

The structure, composition, and temperature coefficient of resistance of tantalum films were studied as a function of deposition parameters and substrate temperature. As the sputtering power increases from 25 to 100 W, tantalum films deposited at 300 deg. C consisting of the {beta} phase, the preferred-growth orientation changes from (200) to (202) and the temperature coefficient of resistance reduces from -289.79 to -116.65 ppm/ deg. C. The decrease in oxygen and other impurity content in the films was observed when the deposition power was increased. The O/Ta ratio decrease and grain size reduction, which were related to a change in electrical resistivity, were also observed as substrate temperature was varied from 300 to 500 deg. C. These results indicated that the electrical properties were related to the oxygen and other impurity content and grain size in the films rather than to growth orientation. At 650 deg. C, the metastable {beta}-Ta phase was partially transformed into the stable {alpha}-Ta phase which leads to a sharp decrease in the electrical resistivity and a significant change in the microstructure of the tantalum films.

36 MATERIALS SCIENCE↗

Radical–radical reactions, pyrene nucleation, and incipient soot formation in combustion

Here, we present a combined experimental and probabilistic simulation study of soot-precursor. The experiments were conducted using aerosol mass spectrometry coupled with tunable vacuum ultraviolet radiation from the Advanced Light Source at Lawrence Berkeley National Laboratory. Mass spectra and photoionization efficiency (PIE) curves of soot precursor species were measured at different heights in a premixed flat flame and in a counter-flow diffusion flame fueled by ethylene and oxygen. The PIE curves at the pyrene mass from these flames were compared with reference PIE scans recorded for pyrene. The results demonstrate that other C 16 H 10 isomers than pyrene are major components among species condensed onto incipient soot in this study, which is in agreement with the simulations. Species with mass 202 u only have a high prevalence in incipient soot particles drawn from the premixed flame, but hydrocarbon species with sizes in the range 200-400 u are important to incipient-soot formation in both flames. The simulations predict that some species form through combination reactions involving relatively large radicals and bypass traditional molecular-growth pathways through addition of small hydrocarbon species. The experimental results support this prediction; they demonstrate that these species have higher relative abundances in particles formed close to the fuel outlet than smaller, lighter molecular species and indicate that these species are important to early formation of incipient-soot precursors. The results also imply that a leading role in incipient-soot precursor formation is played by species with lower thermal stability than the even-carbon numbered, unsubstituted polycyclic aromatic hydrocarbons known as "stabilomers".

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE Award No. DE-FC36-03GO13108 NOVEL NON-PRECIOUS METAL CATALYSTS FOR PEMFC: CATALYST SELECTION THROUGH MOLECULAR MODELING AND DURABILITY STUDIES Final Report (September 2003 – October 2008)

The objective of this project is to develop novel non-precious metal electrocatalysts for oxygen reduction reaction (ORR), and demonstrate the potential of the catalysts to perform at least as good as conventional Pt catalysts currently in use in polymer electrolyte membrane fuel cell (PEMFC) with a cost at least 50 % less than a target of 0.2 g (Pt loading)/peak kW and with durability > 2,000 h operation with less than 10 % power degradation. A novel nitrogen-modified carbon-based catalyst was obtained by modifying carbon black with nitrogen-containing organic precursor in the absence of transition metal precursor. The catalyst shows the onset potential of approximately 0.76 V (NHE) for ORR and the amount of H2O2 of approximately 3% at 0.5 V (NHE). Furthermore, a carbon composite catalyst was achieved through the high-temperature pyrolysis of the precursors of transition metal (Co and Fe) and nitrogen supported on the nitrogen-modified carbon-based catalyst, followed by chemical post-treatment. This catalyst showed an onset potential for ORR as high as 0.87 V (NHE), and generated less than 1 % of H2O2. The PEM fuel cell exhibited a current density of 2.3 A cm-2 at 0.2 V for a catalyst loading of 6.0 mg cm-2. No significant performance degradation was observed for 480 h continuous operation. The characterization studies indicated that the metal-nitrogen chelate complexes decompose at the temperatures above 800 oC. During the pyrolysis, the transition metals facilitate the incorporation of pyridinic and graphitic nitrogen groups into the carbon matrix, and the carbon surface modified with nitrogen is active for ORR. In order to elucidate the role of transition metal precursor played in the formation of active sites in the non-precious metal catalysts, a novel ruthenium-based chelate (RuNx) catalyst was synthesized by using RuCl3 and propylene diammine as the Ru and N precursors, respectively, followed by high-temperature pyrolysis. This catalyst exhibited comparable catalytic activity and selectivity for ORR as the Pt catalyst. A theoretical analysis is made of the four-electron reduction reaction of oxygen to water over the mixed anion and cation (202) surface of pentlandite structure Co9Se8, one of several selenide phases. Reversible potentials for forming adsorbed reaction intermediates in acid are predicted using adsorption energies calculated with the Vienna ab initio simulation program (VASP) and the known bulk solution values together in a linear Gibbs energy relationship. The effect of hydrophobic and structural properties of a single/dual-layer cathode gas diffusion layer on mass transport in PEM fuel cells was studied using an analytical expression. The simulations indicated that liquid water transport at the cathode is controlled by the fraction of hydrophilic surface and the average pore diameter in the cathode gas diffusion layer. The optimized hydrophobicity and pore geometry in a dual-layer cathode GDL leads to an effective water management, and enhances the oxygen diffusion kinetics.

08 HYDROGEN↗