The effect of lead ions on the dissolution and deposition characteristics of a zinc single crystal in 6N KOH
Lead ion effects on single crystal zinc dissolution and electrodeposition in alkaline solutions investigated microscopically
Gilman, S.↗
SEARCH · Search NASA
Results for “LEAD IONS”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Friction and Wear Properties of Selected Solid Lubricating Films: Ion-Plated Lead Films - Part 2
To evaluate commercially developed dry solid film lubricants for aerospace bearing applications, an investigation was conducted to examine the friction and wear behavior of ion-plated lead films in sliding contact with 6-mm-diameter American Iron and Steel Institute (AISI) 440C stainless steel balls. Unidirectional sliding friction experiments were conducted with a load of 5.9 N (600 g), a mean Hertzian contact pressure of 0.79 GPa (maximum Hertzian contact pressure of 1.2 GPa), and a sliding velocity of 0.2 m/s. The experiments were conducted at room temperature in three environments: ultrahigh vacuum (vacuum pressure, 7 x 10(exp -7 Pa), humid air (relative humidity, approx. 20 percent), and dry nitrogen (relative humidity, less then 1 percent). The resultant films were characterized by scanning electron microscopy, energy-dispersive X-ray spectroscopy, and surface profilometry. Marked differences in the friction and wear of the ion-plated lead films investigated herein resulted from the environmental conditions. The main criteria for judging the performance of the ion-plated lead films were coefficient of friction and wear rate, which had to be less than 0.3 and on the order of 1(exp -6) cu mm/N.m or less, respectively. The ion-plated lead films met both criteria only in ultrahigh vacuum but failed in humid air and in dry nitrogen, where the coefficient of friction was higher than the criterion. Both the lead film wear rate and the ball wear rate met that criterion in all three environments. Adhesion and plastic deformation played important roles in the friction and wear of the ion-plated lead films in contact with 440C stainless steel balls in the three environments. All sliding involved adhesive transfer of materials: transfer of lead wear debris to the counterpart 440C stainless steel and transfer of 440C stainless steel wear debris to the counterpart lead.
Miyoshi, Kazuhisa↗
The plasma regime at comet Giacobini-Zinner
The paper reviews results on the plasma regime at Comet Giacobini-Zinner obtained by the International Cometary Explorer. The observations are consistent with the existence of a weak shock which may be pulsating, but do not exclude the suggestion that the shock, though present around the subsolar point, is an the process of decaying to a wave on the flanks. 'The pick-up' of cometary ions leads to ion cyclotron, mirror, beam, and electrostatic instabilities which cause strong turbulence in the inner coma.
Ogilvie, K. W.↗
Two dimensional PIC simulations of plasma heating by the dissipation of Alfven waves
Two dimensional plasma particle simulations of the evolution of large amplitude circularly polarized Alfven waves propagating parallel to the magnetic field show that the waves decay via both one- and two- dimensional parametric decay instabilities. For parameters studied, one-dimensional processes dominate the simulations, but two-dimensional decay processes, including the recently predicted filamentation instability are also observed. The daughter waves generated by the parametric decay are primarily damped by the ions, leading to ion heating. The parametric decay processes efficiently convert the ordered fluid ion motion in the Alfven wave into ion thermal energy. These processes may be important for the dissipation of Alfven waves in the solar wind, the corona and other space plasma environments. The computations were performed on the Intel Touchstone parallel supercomputer.
Liewer, P. C.↗
The Consequences of Alfven Waves and Parallel Potential Drops in the Auroral Zone
The goal of this research is to examine the causes of field-aligned plasma acceleration in the auroral zone using satellite data and numerical simulations. A primary question to be addressed is what causes the field-aligned acceleration of electrons (leading to precipitation) and ions (leading to upwelling ions) in the auroral zone. Data from the Fast Auroral SnapshoT (FAST) and Polar satellites is used when the two satellites are in approximate magnetic conjunction and are in the auroral region. FAST is at relatively low altitudes and samples plasma in the midst of the auroral acceleration region while Polar is at much higher altitudes and can measure plasmas and waves propagating towards the Earth. Polar can determine the sources of energy streaming earthward from the magnetotail, either in the form of field-aligned currents, electromagnetic waves or kinetic particle energy, that ultimately leads to the acceleration of plasma in the auroral zone. After identifying and examining several events, numerical simulations are run that bridges the spatial region between the two satellites. The code is a one-dimensional, long system length particle in cell simulation that has been developed to model the auroral region. A main goal of this research project is to include Alfven waves in the simulation to examine how these waves can accelerate plasma in the auroral zone.
Schriver, David↗
Solar Wind Induced Waves in the Skies of Mars: Ionospheric Compression, Energization, and Escape Resulting from the Impact of Ultralow Frequency Magnetosonic Waves Generated Upstream of the Martian Bow Shock
Using data from the National Aeronautics and Space Administration Mars Atmosphere and Voltatile EvolutioN and the European Space Agency Mars Express spacecraft, we show that transient phenomena in the foreshock and solar wind can directly inject energy into the ionosphere of Mars. We demonstrate that the impact of compressive ultralow frequency waves in the solar wind on the induced magnetospheres drive compressional, linearly polarized, magnetosonic ultralow frequency waves in the ionosphere, and a localized electromagnetic "ringing" at the local proton gyro frequency. The pulsations heat and energize Ionospheric plasmas. A preliminary survey of events shows that no special upstream conditions are required in the interplanetary magnetic field or solar wind. Elevated ion densities and temperatures in the solar wind near to Mars are consistent with the presence of an additional population of Martian ions, leading to ion-ion instabilities, associated wave-particle interactions, and heating of the solar wind. The phenomenon was found to be seasonal, occurring when Mars is near perihelion. Finally, we present simultaneous multipoint observations of the phenomenon, with the Mars Express observing the waves upstream, and Mars Atmosphere and Voltatile EvolutioN observing the response in the ionosphere. When these new observations are combined with decades of previous studies, they collectively provide strong evidence for a previously undemonstrated atmospheric loss process at unmagnetized planets: ionospheric escape driven by the direct impact of transient phenomena from the foreshock and solar wind.
Collinson, Glyn↗
Catalyst surfaces for the chromous/chromic redox couple
An electricity producing cell of the reduction-oxidation (REDOX) type is described. The cell is divided into two compartments by a membrane, each compartment containing a solid inert electrode. A ferrous/ferric couple in a chloride solution serves as a cathode fluid which is circulated through one of the compartments to produce a positive electric potential disposed therein. A chromic/chromous couple in a chloride solution serves as an anode fluid which is circulated through the second compartment to produce a negative potential on an electrode disposed therein. The electrode is an electrically conductive, inert material plated with copper, silver or gold. A thin layer of lead plates onto the copper, silver or gold layer when the cell is being charged, the lead ions being available from lead chloride which was added to the anode fluid. If the REDOX cell is then discharged, the current flows between the electrodes causing the lead to deplate from the negative electrode and the metal coating on the electrode will act as a catalyst to cause increased current density.
Giner, J. D.↗
Catalyst surfaces for the chromous/chromic redox couple
An electricity producing cell of the reduction-oxidation (REDOX) type divided into two compartments by a membrane is disclosed. A ferrous/ferric couple in a chloride solution serves as a cathode fluid to produce a positive electric potential. A chromic/chromous couple in a chloride solution serves as an anode fluid to produce a negative potential. The electrode is an electrically conductive, inert material plated with copper, silver or gold. A thin layer of lead plates onto the copper, silver or gold layer when the cell is being charged, the lead ions being available from lead chloride which has been added to the anode fluid. If the REDOX cell is then discharged, the lead deplates from the negative electrode and the metal coating on the electrode acts as a catalyst to increase current density.
Giner, J. D.↗
Nonneutral and quasi-neutral diffusion of weakly ionized multiconstituent plasma
A theory is developed for quasi-neutral and nonneutral ambipolar diffusion in a weakly ionized multiconstituent plasma. Magnetic field effects are disregarded. The effects of negative ions and various positive and negative ion diffusion coefficients are identified. It is found that the presence of negative ions leads to enhanced electron diffusion and a retarded diffusion of positive ions. In some cases electrons may be forcibly propelled from the area of perturbations in ionic concentrations. The ambipolar electric field is observed to cause negative ions to flow in a countergradient fashion where the gradient is small. Electrons tend toward a more homogeneous spatial distribution in the nonneutral case than in the quasi-neutral case.
Hill, R. J.↗
Improved alkaline electrochemical cell
Addition of lead ions to electrolyte suppresses zinc dendrite formation during charging cycle. A soluble lead salt can be added directly or metallic lead can be incorporated in the zinc electrode and allowed to dissolve into the electrolyte.
Fleischmann, C. W.↗
Timescales of Soil Moisture Anomalies: Results from Two GCMs
Soil moisture anomalies dissipate over timescales that may span weeks to months. Characterizing the geographical and seasonal variations in these timescales can have important practical benefit; significant soil moisture "memory" allows long-lead forecasts of soil moisture, which have been found in recent studies to be essential for useful Ion--lead forecasts of precipitation in many regions. In this talk, we will present and compare the soil moisture timescales derived in two separate general circulation model (GCM) studies. Both studies employ multiple ensembles of short-term climate simulations. Timescales at a given point are effectively estimated by determining how quickly the soil moisture distribution generated in one ensemble of simulations (characterized by a unique set of initial soil moisture conditions) approaches that produced by another ensemble (characterized by a different set of initial soil moisture conditions). The talk will include a discussion of why the timescales produced by the two GCMs differ in some regions, and it will also describe the impact of soil moisture memory on simulated precipitation.
Koster, Randal D.↗
Dispersion discontinuities of strong collisionless shocks
Linear fluid equations are used to estimate wave train properties of strong collisionless shocks. Fast shocks exhibit several dispersion changes with increasing Mach number. For perpendicular propagation into a finite-beta plasma, an ion cyclotron radius trailing wave train exists only for (M sub F)2 is smaller than 2. Oblique fast shocks have a leading ion inertia wave train if M sub A is smaller than root of M(+)/M(-) cos theta/2 and a trailing electron inertia train if M sub A is greater than root of M(+)/M(-) cos theta/2. If the downstream sound speed exceeds the flow speed, linear wave theory predicts a trailing ion acoustic structure which probably resides within the magnetic shock. For a turbulent shock model in which an effective electron-ion collision frequency exceeds the lower hybrid frequency, ions decouple from the magnetic field; the shock wave train now trails with electron inertia and electron gyroradius lengths. Comparisons of this turbulent model and observations on the earth's bow shock are made.
Coroniti, F. V.↗
Karyotypes of Human Lymphocytes Exposed to High-Energy Iron Ions
Chromosomal aberrations were analyzed using multicolor fluorescence in situ hybridization (mFISH) in human peripheral blood lymphocytes after in vitro exposure to gamma rays or accelerated (56)Fe ions (1 GeV/nucleon, 145 keV/microm) at Brookhaven National Laboratory (Upton, NY). Doses of 0.3 and 3 Gy were used for both radiation types. Chromosomes were prematurely condensed by a phosphatase inhibitor (calyculin A) to avoid the population selection bias observed at metaphase as a result of the severe cell cycle delays induced by heavy ions. A total of 1053 karyotypes (G(2) and M phases) were analyzed in irradiated lymphocytes. Results revealed different distribution patterns for chromosomal aberrations after low- and high-LET radiation exposures: Heavy ions induced a much higher fraction of cells with multiple aberrations, while the majority of the aberrant cells induced by low doses of gamma rays contained a single aberration. The high fraction of complex-type exchanges after heavy ions leads to an overestimation of simple-type asymmetrical interchanges (dicentrics) from analysis of Giemsa-stained samples. However, even after a dose of 3 Gy iron ions, about 30% of the cells presented no complex-type exchanges. The involvement of individual chromosomes in exchanges was similar for densely and sparsely ionizing radiation, and no statistically significant evidence of a nonrandom involvement of specific chromosomes was detected.
NASA Center JSC↗
Hybrid simulation of comet Shoemaker-Levy 9 interaction with Jovian bow shock
The interaction of the solar wind with comet Shoemaker-Levy 9 leading to the formation of the cometary magnetosphere and its interaction with the Jovian bow shock is simulated using a one dimensional hybrid code. The mass loading of the solar wind by the cometary ions leads to the formation of a bow shock behind which the plasma density is 2-3/cu cm and the electron temperature is 4 eV. The interaction of this system with the Jovian bow shock yields local enhancements of the magnetic field and the plasma density by factors of 4-5 and the electron temperature by 2-3.
Lipatov, A. S.↗
Assessment and Requirements of Nuclear Reaction Databases for GCR Transport in the Atmosphere and Structures
The transport properties of galactic cosmic rays (GCR) in the atmosphere, material structures, and human body (self-shielding) am of interest in risk assessment for supersonic and subsonic aircraft and for space travel in low-Earth orbit and on interplanetary missions. Nuclear reactions, such as knockout and fragmentation, present large modifications of particle type and energies of the galactic cosmic rays in penetrating materials. We make an assessment of the current nuclear reaction models and improvements in these model for developing required transport code data bases. A new fragmentation data base (QMSFRG) based on microscopic models is compared to the NUCFRG2 model and implications for shield assessment made using the HZETRN radiation transport code. For deep penetration problems, the build-up of light particles, such as nucleons, light clusters and mesons from nuclear reactions in conjunction with the absorption of the heavy ions, leads to the dominance of the charge Z = 0, 1, and 2 hadrons in the exposures at large penetration depths. Light particles are produced through nuclear or cluster knockout and in evaporation events with characteristically distinct spectra which play unique roles in the build-up of secondary radiation's in shielding. We describe models of light particle production in nucleon and heavy ion induced reactions and make an assessment of the importance of light particle multiplicity and spectral parameters in these exposures.
Cucinotta, F. A.↗
Adhesion and friction behavior of group 4 elements germanium, silicon, tin, and lead
Adhesion and friction studies were conducted with thin films of the group IV elements silicon, germanium, tin, and lead ion plated on the nickel (011) substrate. The mating surface was gold (111). Contacts were made for the elements in the clean state and with oxygen present. Adhesion and friction experiments were conducted at very light loads of 1 to 10 g. Sliding was at a speed of 0.7 mm/min. Friction results indicate that the more covalently bonded elements silicon and germanium exhibit lower adhesion and friction than the more metallic bonded tin and lead. The adhesion of gold to germanium was observed, and recrystallization of the transferred gold occurred. Plastic flow of germanium was seen with sliding. Oxygen reduced, but did not eliminate, the adhesion observed with germanium and silicon.
Buckley, D. H.↗
Terminator Double Layer Explorer (TerDLE): Examining the Near-Moon Lunar Wake
As the solar wind flows by the Moon, an antisunward-directed low-density wake forms as the plasma expands to fill in the trailing void in the plasma flow. Analytical modeling and modern plasma simulations suggest that plasma quasi-neutrality could possibly be broken close to the terminator obstruction as solar wind electrons expand into the wake ahead of the ions, leading to the formation of a standing (time-stationary) double layer. The objective of the Terminator Double Layer Explorer is to extend the fundamental understanding of the plasma expansion into the trailing near-vacuum wake region by (1) identifying any plasma expansion density anomalies at low altitudes near the terminator wake initiation region, (2) assessing the highly variable solar wind's effect on the low-altitude wake region, and (3) determining if plasma neutrality is maintained or lost during passages through the low-altitude expansion region. The mission concept uses a propulsion-driven CubeSat with ion spectrometer and plasma wave system in elliptical orbit about the Moon with periselene near the terminator. Over the course of the mission, the periselene decreases, placing the CubeSat ever closer to the terminator wake initiation location and the possible nonneutral region.
lunar science↗
Property enchancement of polyimide films by way of the incorporation of lanthanide metal ions
Lanthanide metal ions were incorporated into the polyimide derived from 2,2-bis(3,4-dicarboxyphenyl) hexafluoropropane dianhydride (6FDA) and 1,3-bis(aminophenoxy) benzene (APB) in an attempt to produce molecular level metal-polymer composites. The lanthanide series of metal ions (including aluminum, scandium, and yttrium) provide discrete and stable metal ions in the 3+ oxidation state. Throughout the series there is a uniform variation in ionic size ranging from 50 pm for aluminum to a maximum of 103.4 pm for cerium and gradually decreasing again to 84.8 pm for lutetium. The high charge-to-size ratio for these ions as well as the ability to obtain large coordination numbers makes them excellent candidates for interacting with the polymer substructure. The distinct lack of solubility of simple lanthanide salts such as the acetates and halides has made it difficult to obtain metal ions distributed in the polymer framework as discrete ions or metal complexes rather than microcomposites of metal clusters. (Lanthanum nitrates are quite soluble, but the presence of the strongly oxidizing nitrate ion leads to serious degradation of the polymer upon thermal curing. This work was successful at extending the range of soluble metals salts by using chelating agents derived from the beta-diketones dipivaloylmethane, dibenzoylmethane, trifluoroacetylacetone, and hexafluoroacetylacetone. Metal acetates which are insoluble in dimethylacetamide dissolve readily in the presence of the diketones. Addition of the polyimide yields a homogeneous resin which is then cast into a clear film. Upon curing clear films were obtained with the dibenzoylmethane and trifluoroacetylacetone ligands. The dipavaloylmethane precipitates the metal during the film casting process, and hexafluoroacetylacetone gives cured films which are deformed and brittle. These clear films are being evaluated for the effect of the metal ions on the coefficient of thermal expansion, resistance to atomic oxygen, and on selective gas permeability. Much more commonly than above, polyimide films are prepared by casting the film as the poly(amic acid) precursor which is then converted to the imidized form during the thermal cure cycle. Very limited success was achieved in the past in adding lanthanide metal ions to the amide precursors because of gellation and lack of solubility. With the use of the diketone ligands cited above, the solubility and gellation problems were overcome. However, the films after curing were clear but unacceptably brittle. Attempts to overcome this cure embrittlement problem are in progress.
Thompson, David W.↗