Performance assessment of long-legged tightly-baffled divertor geometries in the ARC reactor concept
Explore the source record for details and available documents.
Physics↗
SEARCH · Search NASA
Results for “LEGS”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Doping evolution of charge and spin excitations in two-leg Hubbard ladders: Comparing DMRG and FLEX results [Doping evolution of charge and spin excitations in two-leg Hubbard ladders: Comparing DMRG and RPA+FLEX results]
Here, we study the magnetic and charge dynamical response of a Hubbard model in a two-leg ladder geometry using the density matrix renormalization group (DMRG) method and the random phase approximation within the fluctuation-exchange approximation (FLEX). Our calculations reveal that FLEX can capture the main features of the magnetic response from weak up to intermediate Hubbard repulsion for doped ladders, when compared with the numerically exact DMRG results. However, while at weak Hubbard repulsion both the spin and charge spectra can be understood in terms of weakly interacting electron-hole excitations across the Fermi surface, at intermediate coupling DMRG shows gapped spin excitations at large momentum transfer that remain gapless within the FLEX approximation. For the charge response, FLEX can only reproduce the main features of the DMRG spectra at weak coupling and high doping levels, while it shows an incoherent character away from this limit. Overall, our analysis shows that FLEX works surprisingly well for spin excitations at weak and intermediate Hubbard U values even in the difficult low-dimensional geometry such as a two-leg ladder. Finally, we discuss the implications of our results for neutron scattering and resonant inelastic x-ray scattering experiments on two-leg ladder cuprate compounds.
72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
Modeling a divertor with mid-leg pumping for high-power H-mode scenarios in DIII-D considering E x B drift flows
Edge-plasma simulations of a baffled, long-legged divertor in DIII-D, performed using the multi-fluid code UEDGE, indicate that the position of the detachment front is constrained to the location of the pump duct along the low-field side (LFS) baffle. Simulations including magnetic and E x B drifts were performed for 12.5 MW deuterium plasmas including intrinsic carbon and seeded neon to assess the optimal location of the LFS divertor pump to create a stable detachment front between the target and the X-point. The radiation front position in the simulations, taken to be indicative of the detachment front, can be controlled between the pump and X-point in the favorable magnetic field direction for H-mode access by moving the pump duct location upstream of the target along the LFS baffle. In the unfavorable magnetic field direction, the radial E θ x B drift flows are directed towards the pumping surface, efficiently removing the injected deuterium gas and limiting the sensitivity of the radiation front location to the gas injection rate. The role of pumping rate and drift direction on the pumping efficiency are also found to affect the divertor plasma conditions and detachment front location in UEDGE simulations.
70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
Nanometer-scale structure differences in the myofilament lattice spacing of two cockroach leg muscles correspond to their different functions
ABSTRACT Muscle is highly organized across multiple length scales. Consequently, small changes in the arrangement of myofilaments can influence macroscopic mechanical function. Two leg muscles of a cockroach have identical innervation, mass, twitch responses, length–tension curves and force–velocity relationships. However, during running, one muscle is dissipative (a ‘brake’), while the other dissipates and produces significant positive mechanical work (bifunctional). Using time-resolved X-ray diffraction in intact, contracting muscle, we simultaneously measured the myofilament lattice spacing, packing structure and macroscopic force production of these muscles to test whether structural differences in the myofilament lattice might correspond to the muscles' different mechanical functions. While the packing patterns are the same, one muscle has 1 nm smaller lattice spacing at rest. Under isometric stimulation, the difference in lattice spacing disappeared, consistent with the two muscles' identical steady-state behavior. During periodic contractions, one muscle undergoes a 1 nm greater change in lattice spacing, which correlates with force. This is the first identified structural feature in the myofilament lattice of these two muscles that shares their whole-muscle dynamic differences and quasi-static similarities.
Tune, Travis Carver↗
Drive-Leg Kinematics During the Windup and Pushoff Is Associated With Pitching Kinetics at Later Phases of the Pitch
Background: Inconsistent findings exist between drive-leg ground-reaction forces (GRFs) and pitching mechanics. Previous literature has largely reported drive-leg mechanics and GRFs at the start of the pushoff phase for their role in initiating force development. Little research has assessed drive-leg kinematics that includes a pitcher’s windup motion to determine its effects on subsequent phases in the pitching motion. Purpose/Hypothesis: The primary aim was to analyze the relationship between drive-leg knee valgus angle during the windup and subsequent pitching mechanics. We hypothesized that the drive-leg knee valgus angle during the early portion of the pitching motion would alter later phases’ pitching mechanics. A secondary aim was to assess GRFs to determine if the drive-leg knee valgus angle was associated with changes in force. We hypothesized that an increased drive-leg knee valgus angle would increase GRFs during the pitching motion. Study Design: Descriptive laboratory study. Methods: A total of 17 high school baseball pitchers (mean age, 16.1 ± 0.9 years; mean height, 180.0 ± 4.8 cm; mean weight, 75.5 ± 7.5 kg) volunteered for the study. Kinematic data and GRFs were collected using an electromagnetic tracking system and force plates. Pitchers threw maximal-effort fastballs from a mound at regulation distance. The drive-leg knee valgus angle was analyzed during the windup and pushoff phases of the pitch to determine its effects on other biomechanical variables throughout the pitching motion. Results: There was a significant relationship between drive-leg knee valgus angle during the windup ( Fchange 1,12) = 16.13; P = .002; R 2 = 0.695) and lateral GRF in the arm-cocking phase. Additionally, there was a significant relationship between drive-leg knee valgus angle during pushoff ( Fchange(2,11) = 10.21; P = .003; R 2 = 0.716) and lateral GRF in the arm-cocking phase and pitching-elbow valgus moment in the acceleration phase. Conclusion: Drive-leg knee valgus angle during the windup and pushoff had a significant relationship with drive-leg GRF and pitching-elbow valgus moment at later stages of the pitching cycle. Clinical Relevance: Assessments of drive-leg kinematics during the windup and pushoff may be useful in identifying inefficient movement patterns that can have an effect on the direction of a pitcher’s drive-leg force contribution, which can lead to increased forces on the throwing elbow.
Orthopedics↗
The impact of thermoelectric leg geometries on thermal resistance and power output
Thermoelectric devices enable direct, solid-state conversion of heat to electricity and vice versa. Rather than designing the shape of thermoelectric units or legs to maximize this energy conversion, the cuboid shape of these legs has instead remained unchanged in large part because of limitations in the standard manufacturing process. However, the advent of additive manufacturing (a technique in which freeform geometries are built up layer-by-layer) offers the potential to create unique thermoelectric leg geometries designed to optimize device performance. This work explores this new realm of novel leg geometry by simulating the thermal and electrical performance of various leg geometries such as prismatic, hollow, and layered structures. The simulations are performed for two materials, a standard bismuth telluride material found in current commercial modules and a higher manganese silicide material proposed for low cost energy conversion in high-temperature applications. The results include the temperature gradient and electrical potential developed across individual thermoelectric legs as well as thermoelectric modules with 16 legs. Even simple hollow and layered leg geometries result in larger temperature gradients and higher output powers than the traditional cuboid structure. As a result, the clear dependence of thermal resistance and power output on leg geometry provides compelling motivation to explore additive manufacturing of thermoelectric devices.
30 DIRECT ENERGY CONVERSION↗
Divertor leg filaments in NSTX-U
This study presents the first observation of divertor localized turbulence in the NSTX-Upgrade spherical tokamak. Previous work in NSTX discharges described fluctuations on the divertor target due to blobs generated on the low field side midplane. In the region that shows disconnection from upstream turbulence (private flux region and proximity of the strike point), divertor-localized fluctuations are observed via imaging of C III and D-α emission in diverted L-mode discharges and are characterized in this paper. Field-aligned filaments connected to the divertor target plate are radially localized at the separatrix on the outer divertor leg and in the private flux region on the inner divertor leg. These are limited to the region below the X-point with fluctuation levels up to 10%–20%. The filaments have comparable poloidal and radial correlation lengths (10–100 ion gyroradii ρ i ) and parallel correlation lengths of several meters. Toroidal mode numbers are in the range of 10–30 and 2–10 for outer and inner leg filaments. The poloidal motion of outer leg filaments has the same direction and comparable magnitude to advection due to E x B drift calculated by the multi-fluid edge transport code UEDGE with inclusion of cross field drifts. Disconnection between inner and outer leg filaments as well as the absence of correlation with upstream turbulence support the hypothesis of X-point disconnection for divertor leg filaments. Simulations with the ArbiTER linear eigenvalue solver and a resistive-balooning model were performed with a simulation grid limited to the divertor legs. Instabilities localized to the bad curvature side of the divertor legs were observed, in qualitative agreement with the experiment.
70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
Investigation of Fourth-leg for Common-mode Noise Reduction in Three-level Neutral Point Clamped Inverter Fed Motor Drive
The four-leg topology has been applied to two-level inverters for common-mode (CM) noise elimination. To achieve zero common-mode voltage (CMV), the zero vector typically used in the two-level inverter is not allowed. As a result, the reference cannot be synthesized by nearest three vectors, which introduces a penalty in dc voltage utilization and current THD. This paper applies the fourth-leg to three-level neutral point clamped (NPC) inverter fed motor drives. Unlike the case in the two-level inverter, the reference can be synthesized by the nearest three vectors while zero CMV can be achieved at the same time in a three-level inverter with the fourth-leg. The topology and modulation are presented. The fourth-leg filter structures are investigated, and a fourth-leg filter structure which decouples the fourth-leg from the main circuit power level is proposed for high power applications. The experiment results on a three-level NPC inverter show that with the fourth-leg and presented modulation applied, the CM noise has been significantly reduced, and around 25 dB attenuation can be observed at the first noise peak in the electromagnetic interference (EMI) frequency range.
Chen, Ruirui↗
Mechanisms behind impurity spreading in a channeled, long-leg divertor configuration
One suggested benefit of long-leg, tightly baffled divertor configurations, a common feature included in the designs of many next-generation fusion devices, is access to a delocalized “spread” of impurity radiation along the leg, allowing for a substantial radiation region while maintaining both sufficient distance from the core to prevent pollution of the plasma fuel and avoiding local overheating of the plasma-facing materials. However, it is unclear whether this increased connection length and divertor volume afforded by the long-leg configuration is compatible with impurity transport, and whether it will enable this desired impurity radiation spread at all. Here, the SOLPS 4.3 code is used to assess the distribution of nitrogen and neon impurity radiation in a long-leg, tightly baffled divertor geometry. Further, there is a strong correspondence between the distribution of impurity radiation in the long leg and impurity recycling on the divertor side walls with both the nitrogen simulation set and the neon simulation set, suggesting that impurity spreading along these long legs is due to the interplay between the cross-field transport and associated neutralization of the impurity on the material surfaces.
70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
Study of passively stable, fully detached divertor plasma regimes attained in innovative long-legged divertor configurations
Numerical modeling of divertor configurations with radially or vertically extended, tightly baffled, outer divertor legs has demonstrated the existence of a passively-stable fully detached divertor regime. Here in the simulations, long-legged divertors provide up to an order-of-magnitude increase in peak power handling capability compared to conventional divertors. The key physics for attaining the passively stable, fully detached regime in these simulations involves the interplay of strong convective plasma transport to the divertor leg outer sidewall, confinement of neutral gas in the divertor volume, geometric effects including a secondary X-point, and atomic radiation. New analysis shows that in this regime the detachment front location is set by the balance between the power entering the divertor leg and the losses to the walls of the divertor channel. Correspondingly, the maximum power that can be accommodated by the divertor, while still staying detached, increases with the poloidal length of the leg. The detached regime access window in terms of input power, density and impurity seeding concentration varies quantitatively depending on divertor geometry and modeling assumptions most specifically, cross-field transport to the side walls.
70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
Study of passively stable, fully detached divertor plasma regimes attained in innovative long-legged divertor configurations
Numerical modeling of divertor configurations with radially or vertically extended, tightly baffled, outer divertor legs has demonstrated the existence of a passively-stable fully detached divertor regime. In the simulations, long-legged divertors provide up to an order-of- magnitude increase in peak power handling capability compared to conventional divertors. The key physics for attaining the passively stable, fully detached regime in these simulations involves the interplay of strong convective plasma transport to the divertor leg outer sidewall, confinement of neutral gas in the divertor volume, geometric effects including a secondary X-point, and atomic radiation. New analysis shows that in this regime the detachment front location is set by the balance between the power entering the divertor leg and the losses to the walls of the divertor channel. Correspondingly, the maximum power that can be accommodated by the divertor, while still staying detached, increases with the poloidal length of the leg. The detached regime access window in terms of input power, density and impurity seeding concentration varies quantitatively depending on divertor geometry and modeling assumptions most specifically, cross-field transport to the side walls.
70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
Double-Side Cooled 1.2kV, 300A SiC MOSFET Phase-leg Modules for 200 kW, > 100 kW/L Traction Inverters
The packaging of a double-side cooled 1.2 kV, 149 A SiC phase-leg modules has been reported in recent years for making 100 kW, 100 kW/L traction inverters. Each phase-leg module consists of two SiC MOSFETs, one per switch position. Six of the phase-leg modules are assembled into a segmented inverter configuration to meet the power and power density requirement. In this work, the layout of the phase-leg module was redesigned to include four of the SiC MOSFETs, two per switch position, with the aim of doubling the power to 200 kW and increasing the power density beyond 100 kW/L, but with only a 10.25% footprint increase. Key features of the packaging technology developed in the previous work were implemented in the current work, which include silver sintering for chip bonding and porous silver inter-posts for bonding device source pads to substrate. Parasitic extraction simulation showed that the four-chip module has a low parasitic inductance of 4.7 nH, like the two-chip module. Static characterization of the four-chip prototypes showed a low average on-resistance of 9 mΩ and a low average leakage current of 5 nA at Vds of 1.2 kV.
Zhang, Zichen↗
Simulations of divertor designs that spatially separate power and particle exhaust using mid-leg divertor particle pumping
Predictive design modeling of a Dissipation-Focused Divertor for future operation in DIII-D reveals that increasing the poloidal distance of the pump duct entrance from the target surface along the low-field side divertor baffle increases neutral compression and modifies the spatial distribution of power dissipation. With a divertor pump located mid-leg between the target and the X-point, SOLPS-ITER boundary plasma simulations without drifts predict the formation of a dense neutral cloud near the target with > 30x higher neutral compression in detachment, a more stable detachment front located further from the target, and ~25% lower outer midplane separatrix density required for detachment onset, compared to a pump located in the scrape-off layer at the target surface. Up to 19 MW of power flowing into the divertors is modeled using the following two numerical implementations for particle pumping: a specified fraction of particles incident on variable wall sections of the plasma grid is removed from the computational domain (so-called albedo pumping), and a pump duct is modeled which includes dynamics of kinetic neutrals in the duct. The simulations show that the detachment front is located between the divertor target and the X-point and is relatively stable near the pump entrance, without a strong dependence on gas puff rate or injected power. The mid-leg pump design spatially separates the two primary functions of a divertor (power handling and particle exhaust), with the majority of power dissipation occurring near the target plate and particle exhaust taking place further upstream. The benefit of enhanced dissipation using mid-leg pumping comes at the cost of a higher outer midplane separatrix density for a given amount of particle injection.
70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
Magnetic states of iron-based two-leg ladder tellurides
The recent discovery of superconductivity at high pressure in the two-leg ladder compounds BaFe 2 X 3 (X= S, Se) started the novel field of quasi-one-dimensional iron-based superconductors. In this paper, we use density functional theory (DFT) to predict that the previously barely explored ladder compound RbFe 2 Te 3 should be magnetic with a CX-type arrangement involving ferromagnetic rungs and antiferromagnetic legs, at the realistic density of n=5.5 electrons per iron. The magnetic state similarity with BaFe 2 S 3 suggests that RbFe 2 Te 3 could also become superconducting under pressure. Moreover, at n=6.0 our DFT phase diagrams (with and without lattice tetramerization) reveal that the stable magnetic states could be either a 2×2 magnetic block-type, as for X= Se, or a previously never observed before CY-type state, with ferromagnetic legs and antiferromagnetic rungs. In the Te-based studies, electrons are more localized than in S, implying that the degree of electronic correlation is enhanced for the Te case.
75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
Ground-state phase diagram and superconductivity of the doped Hubbard model on six-leg square cylinders
Here, we have studied the ground state properties of Hubbard model on long six-leg square cylinders with doped hole concentration per site 5.55%≤δ≤12.5% using density-matrix renormalization group. By keeping a large number of states for long system sizes, we find that the nature of the ground state is remarkably sensitive to the presence of next-nearest-neighbor electron hopping t'. In the positive t' side, we find a robust d-wave superconducting (SC) phase characterized by coexisting quasi-long-range SC and charge density wave (CDW) correlations. Without t' the ground state forms an insulating stripe phase with long-range CDW order but short-range spin-spin and SC correlations. In stark contrast to four-leg cylinders, our results show that the lightly doped Hubbard model on six-leg cylinders remains insulating in the negative t' side where the SC correlations decay exponentially with short correlation lengths. In the larger negative t' side, the doped holes form a novel holon Wigner crystal with one doped hole per emergent unit cell and short-range spin-spin correlations.
75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
Enhancing EV Charging Station Resilience with Multifunctional Converter Leg Integration
In this paper, a multifunctional converter leg is integrated into an EV charger’s power circuit to enhance EV charging station resilience under power electronics converter device faults and grid outages. In the event of a device fault, it substitutes the failed converter leg, maintaining operation. During a grid outage, it assists the system as a fourth leg to the front-end converter, enabling grid-forming capability to supply power to the charging station critical loads while allowing limited power vehicle charging. The proposed approach’s effectiveness under both front-end power converter device faults and grid outage scenarios are validated through simulation and controller hardware-in-the-loop results.
Pereira Pinto, Joao [ORNL]↗
Merging Dog-leg for Including the Second Gun in the NSLS-II Linear Accelerator
The low-energy part of the NSLS-II linear accelerator begins with the 100-keV gun, which is the key component for the injector performance. The gun electronics determine the generated bunch patterns, emittance, energy spread and charge transport efficiency in the low-energy part of the injector. We proposed to include a second gun to the NSLS-II linac. This upgrade will: a) increase reliability of the NSLS-II accelerator complex and, b) enable more efficient operations in generating complex bunch patterns. The latter is critical since for supporting complex bunch patterns the same gun must be able to switch robustly between single- and multi-bunch modes within the time interval between the top-off cycles. Including the 2nd gun, operating exclusively in the single-bunch mode, would greatly simplify switching between the modes as well as reduce beam charge losses. We designed the NSLS-II linac tunnel so there is a small extra room for the second gun that we proposed to introduce into the main linac via a short dog-leg. To minimize the additional space the dog-leg must be very short and parameters of the dog-leg optical components must stay within reasonable field and gradient values.
43 PARTICLE ACCELERATORS↗
Performance assessment of long-legged tightly-baffled divertor geometries in the ARC reactor concept
Extremely intense power exhaust channels are projected for tokamak-based fusion power reactors; a means to handle them remains to be demonstrated. Advanced divertor configurations have been proposed as potential solutions. Recent modelling of tightly baffled, long-legged divertor geometries for the divertor test tokamak concept, ADX, has shown that these concepts may access passively stable, fully detached regimes over a broad range of parameters. The question remains as to how such divertors may perform in a reactor setting. To explore this, numerical simulations are performed with UEDGE for the long-legged divertor geometry proposed for the ARC pilot plant conceptual design - a device with projected heat flux power width (λq||) of 0.4 mm and power exhaust of 93 MW - first for a simplified Super-X divertor configuration (SXD) and then for the actual X-point target divertor (XPTD) being proposed. It is found that the SXD, combined with 0.5% fixed-fraction neon impurity concentration, can produce passively stable, detached divertor regimes for power exhausts in the range of 80-108 MW - fully accommodating ARC's power exhaust. The XPTD configuration is found to reduce the strike-point temperature by a factor of ~10 compared to the SXD for small separations (~1.4λq||) between main and divertor X-point magnetic flux surfaces. Even greater potential reductions are identified for reducing separations to ~1λq|| or less. The power handling response is found to be insensitive to the level of cross-field convective or diffusive transport assumed in the divertor leg. By raising the separatrix density by a factor of 1.5, stable fully detached divertor solutions are obtained that fully accommodate the ARC exhaust power without impurity seeding. To our knowledge, this is the first time an impurity-free divertor power handling scenario has been obtained in edge modelling for a tokamak fusion power reactor with λq|| of 0.4 mm.
70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗