Search NASA⌕ Search

SEARCH · Search NASA

Results for “LINEAR Z PINCH DEVICES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Radiating Shock Properties in the Z-pinch Dynamic Hohlraum

The Z-pinch dynamic hohlraum is a high-power x-ray source used for a variety of high energy-density physics applications including high temperature opacity measurements and inertial confinement fusion (ICF). The system consists of a tungsten wire-array Z pinch that implodes onto a low-density CH{sub 2} foam launching a radiating shock that heats the hohlraum to radiation temperatures >200 eV. The temperature and density evolution of this shock have been inferred through the measurement of time- and space-resolved line emission from Si atoms locally doped in the CH{sub 2} foam. The observed emission spectra are analyzed through comparison to collisional-radiative calculations that include a detailed treatment of line-shapes and the effect of non-local radiation on the atomic level populations. As a complement to the detailed spectral data, the radial and azimuthal distribution of the axially directed shock emission is recorded with time-gated x-ray pinhole images that provide information on the spatial profile of the shock conditions. Together with broadband x-ray power measurements, these data provide a comprehensive suite of information to determine the shock dynamics and associated energetics of the Z-pinch dynamic hohlraum.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Influence of induced axial magnetic field on plasma dynamics and radiative characteristics of Z pinches

The influence of an induced axial magnetic field on plasma dynamics and radiative characteristics of Z pinches is investigated. An axial magnetic field was induced in a novel Z-pinch load: a double planar wire array with skewed wires (DPWAsk), which represents a planar wire array in an open magnetic configuration. The induced axial magnetic field suppressed magneto-Rayleigh-Taylor (MRT) instabilities (with m = 0 and m = 1 instability modes) in the Z-pinch plasma. The influence of the initial axial magnetic field on the structure of the plasma column at stagnation was manifested through the formation of a more uniform plasma column compared to a standard double planar wire array (DPWA) load [V. L. Kantsyrev et al., Phys. Plasmas 15, 030704 (2008)]. The DPWAsk load is characterized by suppression of MRT instabilities and by the formation of the sub-keV radiation pulse that occurs before the main x-ray peak. Gradients in plasma parameters along the cathode-anode gap were observed and analyzed for DPWAsk loads made from low atomic number Z (Al) and mid-Z (brass) wires.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Studying Radiation from Z-pinch Wire Array and X-Pinch Plasmas: K-shell Mg to M-shell Mo

University-scale Z-pinch generators are able to produce plasmas with a broad range of temperatures, densities, and opacity properties depending on the type, size, and mass of wire-array loads and wire materials. Experiments with very different Z-pinch loads were performed on the 1 MA Zebra generator at UNR and analyzed during the last five years including Single and Nested Cylindrical, Conical, and various types of Planar Wire Arrays. It is shown that such wire arrays are good sources of x-rays and that they produce significant radiation yield (up to 25 kJ) on a ns time scale, and generate bright spots of sub-mm size. They can be used for studying radiative properties of moderate density (between 10{sup 18} cm{sup -3} and 5x10{sup 21} cm{sup -3}) and temperature (<=1.5 keV) plasmas. In addition, X-pinches generated higher density (>10{sup 22} cm{sup -3}) and temperature (>2 keV) plasmas on scales as small as a few mum to several mm in size. Wire materials with a broad range of nuclear charge Z were used, ranging from low-Z, such as alloyed Al wires with varying concentrations of Mg, to mid-Z, such as Stainless steel, Cu, Brass, and Mo. Uniform (made from one wire material) as well as combined (made from two wire materials with almost equal wire masses) wire arrays were considered. Uniform, combined, symmetric and asymmetric X-pinches (some of which included a small fraction of tracer Al wires) were also considered. Non-LTE kinetic models to account for K- and L-shell radiation were employed to understand radiative properties of Z-pinch and X-pinch plasmas. Implosion characteristics of such loads are discussed using the wire dynamics and MHD models. Opacity effects of Z-pinch plasmas are studied and benefits of using alloyed and tracer wires are highlighted.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Measurements of Magneto-Rayleigh-Taylor Instability Growth during the Implosion of Initially Solid Al Tubes Driven by the 20-MA, 100-ns Z Facility

The first controlled experiments measuring the growth of the magneto-Rayleigh-Taylor instability in fast ({approx}100 ns) Z-pinch plasmas are reported. Sinusoidal perturbations on the surface of an initially solid Al tube (liner) with wavelengths of 25-400 {mu}m were used to seed the instability. Radiographs with 15 {mu}m resolution captured the evolution of the outer liner surface. Comparisons with numerical radiation magnetohydrodynamic simulations show remarkably good agreement down to 50 {mu}m wavelengths.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

New compact hohlraum configuration research at the 1.7 MA Z-pinch generator

A new compact Z-pinch x-ray hohlraum design with parallel-driven x-ray sources was experimentally demonstrated in a full configuration with a central target and tailored shine shields (to provide a symmetric temperature distribution on the target) at the 1.7 MA Zebra generator. This presentation reports on the joint success of two independent lines of research. One of these was the development of new sources – planar wire arrays (PWAs). PWAs turned out to be a prolific radiator. Another success was the drastic improvement in energy efficiency of pulsed-power systems, such as the Load Current Multiplier (LCM). The Zebra/LCM generator almost doubled the plasma load current to 1.7 MA. The two above-mentioned innovative approaches were used in combination to produce a new compact hohlraum design for ICF, as jointly proposed by SNL and UNR. Good agreement between simulated and measured radiation temperature of the central target is shown. Experimental comparison of PWAs with planar foil liners (PFL) - another viable alternative to wire array loads at multi-MA generators show promising data. Results of research at the University of Nevada Reno allowed for the study of hohlraum coupling physics at University-scale generators. The advantages of new hohlraum design applications for multi-MA facilities with W or Au double PWAs or PFL x-ray sources are discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Recent advances in theoretical and numerical studies of wire array Z-pinch in the IAPCM

Fast Z-pinch has produced the most powerful X-ray radiation source in laboratory and also shows the possibility to drive inertial confinement fusion (ICF). Recent advances in wire-array Z-pinch researches at the Institute of Applied Physics and Computational Mathematics are presented in this paper. A typical wire array Z-pinch process has three phases: wire plasma formation and ablation, implosion and the MRT instability development, stagnation and radiation. A mass injection model with azimuthal modulation coefficient is used to describe the wire initiation, and the dynamics of ablated plasmas of wire-array Z-pinches in (r, θ) geometry is numerically studied. In the implosion phase, a two-dimensional(r, z) three temperature radiation MHD code MARED has been developed to investigate the development of the Magneto-Rayleigh-Taylor(MRT) instability. We also analyze the implosion modes of nested wire-array and find that the inner wire-array is hardly affected before the impaction of the outer wire-array. While the plasma accelerated to high speed in the implosion stage stagnates on the axis, abundant x-ray radiation is produced. The energy spectrum of the radiation and the production mechanism are investigated. The computational x-ray pulse shows a reasonable agreement with the experimental result. We also suggest that using alloyed wire-arrays can increase multi-keV K-shell yield by decreasing the opacity of K-shell lines. In addition, we use a detailed circuit model to study the energy coupling between the generator and the Z-pinch implosion. Recently, we are concentrating on the problems of Z-pinch driven ICF, such as dynamic hohlraum and capsule implosions. Our numerical investigations on the interaction of wire-array Z-pinches on foam convertors show qualitative agreements with experimental results on the “Qiangguang I” facility. An integrated two-dimensional simulation of dynamic hohlraum driven capsule implosion provides us the physical insights of wire-array plasma acceleration, shock generation and production, hohlraum formation, radiation ablation and fuel compression.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Primary experimental results of wire-array Z-pinches on PTS

The Primary Test Stand (PTS) developed at the China Academy of Engineering Physics is a multiterawatt pulsed power driver, which can deliver a ∼10 MA, 70 ns rise-time (10%-90%) current to a short circuit load and has important applications in Z-pinch driven inertial confinement fusion and high energy density physics. In this paper, primary results of tungsten wire-array Z-pinch experiments on PTS are presented. The load geometries investigated include 15-mm-tall cylindrical single and nested arrays with diameter ranging from 14.4-26.4 mm, and consisting of 132∼276 tungsten wires with 5∼10 μm in diameter. Multiple diagnostics were fielded to determine the characteristics of x-ray radiations and to obtain self-emitting images of imploding plasmas. X-ray power up to 80 TW with ∼3 ns FWMH is achieved by using nested wire arrays. The total x-ray energy exceeds 500 kJ and the peak radiation temperature is about 150 eV. Typical velocity of imploding plasmas goes around 3∼5×10{sup 7} cm/s and the radial convergence ratio is between 10 and 20.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Magnetic Field Measurements in Wire-Array Z-Pinches using Magneto-Optically Active Waveguides

Understanding the magnetic field topology in wire-array Z-pinches as a function of time is of great significance to understanding these high-energy density plasmas especially for their ultimate application to stockpile stewardship and inertial confinement fusion. We are developing techniques to measure magnetic fields as a function of space and time using Faraday rotation of a single longitudinal mode (SLM) laser through a magneto-optically active bulk waveguide (multicomponent terbium borate glass) placed adjacent to, or within, the wire array in 1 MA experiments. We have measured fields >10 T with 100 ns rise times outside of a wire-array for the entire duration of the current pulse and as much as {approx}2 T inside a wire-array for {approx}40 ns from the start of current. This is the first time that such rapidly varying and large fields have been measured using these materials. In a dense Z-pinch, these sensing devices may not survive for long but may provide the magnetic field at the position of the sensor that can be used to corroborate magnetic probes, with which we compare our results.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Neutron spectra from beam-target reactions in dense Z-pinches

The energy spectrum of neutrons emitted by a range of deuterium and deuterium-tritium Z-pinch devices is investigated computationally using a hybrid kinetic-MHD model. 3D MHD simulations are used to model the implosion, stagnation, and break-up of dense plasma focus devices at currents of 70 kA, 500 kA, and 2 MA and also a 15 MA gas puff. Instabilities in the MHD simulations generate large electric and magnetic fields, which accelerate ions during the stagnation and break-up phases. A kinetic model is used to calculate the trajectories of these ions and the neutron spectra produced due to the interaction of these ions with the background plasma. It is found that these beam-target neutron spectra are sensitive to the electric and magnetic fields at stagnation resulting in significant differences in the spectra emitted by each device. Most notably, magnetization of the accelerated ions causes the beam-target spectra to be isotropic for the gas puff simulations. It is also shown that beam-target spectra can have a peak intensity located at a lower energy than the peak intensity of a thermonuclear spectrum. A number of other differences in the shapes of beam-target and thermonuclear spectra are also observed for each device. Finally, significant differences between the shapes of beam-target DD and DT neutron spectra, due to differences in the reaction cross-sections, are illustrated.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Progress in Z-pinch research driven by the mega-ampere device SPEED2

Several pinch configurations have being studied at the Chilean Nuclear Energy Commission using the SPEED2 generator: plasma focus, gas embedded z-pinch and wire arrays. SPEED2 is a generator based on Marx technology (4.1 {mu}F equivalent Marx generator capacity, 300 kV, 4 MA in short circuit, 187 kJ, 400 ns rise time, dI/dt{approx}10{sup 13} A/s). Currently the device is being operated at 70kJ stored energy producing a peak current of 2.4 MA in short circuit. In this work results related to studies in gas embedded z-pinch in deuterium and studies in wire arrays are presented.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Preliminary Results of a 10 kJ Z-Pinch

Preliminary results obtained on 10 kJ Z-pinch device developed at the Plasma and Electrical Discharge Laboratory in the University of Castilla-La Mancha are presented. The device called ENERGU-1 is composed by 8 capacitors (0.5 {mu}F, 75 kV, 20 nH) connected in parallel to a discharge chamber by means of one high power plane transmission line by mean of 8 spark-gaps switches triggered by a 100 kV, 13 ns trigger pulse. The discharge chamber is a cylindrical Pyrex glass tube externally surrounded by a SF{sub 6} isolation atmosphere with the electrodes at the ends. Two different chambers have been studied by discharging the capacitor bank energy in deuterium for optimizing the D-D nuclear fusion reactions: one of 100 mm long by 100 mm inner diameter and the other of the same length and 70 mm inner diameter. Several sequences of ultrahigh speed converter camera photography (5 ns) are presented showing the implosion of plasma columns for different deuterium pressure and currents. Preliminary measurements of integrated 2.45 MeV neutron emissions by a silver activated neutron counter are analyzed as a function of electrical and constructive parameters. A yield of 10{sup 7}-10{sup 8} D-D fusion reactions by shot is reported when the optimum conditions are reached conducting currents of 400-600 kA with a plasma column lifetime above 100 ns.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

An alternative scaling model for neutron production in Z-pinch devices

The DD neutron yield (Y{sub n}) from z-pinches, either dense plasma foci or fast radial pinches, has been fitted for decades to the scaling model Y{sub n} {approx} {alpha}(I{sub max}){sup {delta}}, where {alpha} is a numerical scaling coefficient, I{sub max} the peak current, and 3 < {delta} < 5. The data from 12 000 pulses analyzed from eight different z-pinches presented in this paper show that Y{sub n} varies by as much as {+-}15 000% about the best fit value of the conventional scaling model with {delta} = 4. A revised scaling model derived from the reaction rate equation and a circuit model that includes the time derivative of the current dI/dt (normalized to its initial value) reduces the scatter in data from {+-}15 000% to {+-}100%. For the special case of very high normalized dI/dt, the standard deviation between the revised scaling prediction and the measured neutron yields is reduced to just {+-}30%. Implications of this revised scaling for higher current pinches are discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Ion probe beam experiments and kinetic modeling in a dense plasma focus Z-pinch

The Z-pinch phase of a dense plasma focus (DPF) emits multiple-MeV ions in a ∼cm length. The mechanisms through which these physically simple devices generate such high energy beams in a relatively short distance are not fully understood. We are exploring the origins of these large gradients using measurements of an ion probe beam injected into a DPF during the pinch phase and the first kinetic simulations of a DPF Z-pinch. To probe the accelerating fields in our table top experiment, we inject a 4 MeV deuteron beam along the z-axis and then sample the beam energy distribution after it passes through the pinch region. Using this technique, we have directly measured for the first time the acceleration of an injected ion beam. Our particle-in-cell simulations have been benchmarked on both a kJ-scale DPF and a MJ-scale DPF. They have reproduced experimentally measured neutron yields as well as ion beams and EM oscillations which fluid simulations do not exhibit. Direct comparisons between the experiment and simulations enhance our understanding of these plasmas and provide predictive design capability for accelerator and neutron source applications.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Collective ion acceleration during the decay of a high-current Z-pinch

A study is made of the Z-pinch plasma expansion after the current is switched off. Measurements were carried out in experiments on the implosion of tungsten wire arrays in the Angara-5-1 facility. It is found experimentally that, at a distance of 2 m from the pinch, the ion velocity in the expanding Z-pinch plasma is about (2.5-4.0) x 10{sup 7} cm/s, which substantially exceeds the thermal velocity of tungsten ions. A model describing the plasma expansion process is proposed that is based on the ambipolar acceleration mechanism. The results of numerical simulations are compared with the experimental data.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Initiation of aluminum wire array on the 1-MA ZEBRA accelerator and its effect on ablation dynamics and x-ray yield

The effect of current prepulse on the initiation of Al wire arrays, ablation dynamics and x-ray production was investigated on the 1-MA ZEBRA accelerator (University of Nevada, Reno). It is shown that increasing the number of wires lowers the temperature of the wire cores at the time of breakdown. Al arrays with cold wire cores demonstrate long and inhomogeneous ablation, and a less intense, wider x-ray pulse. Shortening the current prepulse by a flashover switch causes an increased wire-core temperature, symmetrization and synchronization of the wires' ablation, and improvement of the amplitude and shape of the x-ray pulse. Application of a vacuum flashover switch can be important for shortening the current prepulse on the upcoming 28-MA ZR-accelerator at Sandia National Laboratories to optimize the x-ray production and shot-to-shot reproducibility from wire-array Z pinches.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗