Search NASA⌕ Search

SEARCH · Search NASA

Results for “Large Eddy Simulation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Numerical Analysis of Combustion Dynamics in a Full-Scale Rotating Detonation Rocket Engine using Large Eddy Simulations

Large eddy simulations (LES) using detailed chemistry and leveraging adaptive mesh refinement (AMR) are performed to gain insights into the combustion dynamics within a full-scale methane-oxygen non-premixed rotating detonation rocket engine (RDRE) employing impinging discrete injection schemes. In particular, a comparative analysis of two operating conditions corresponding to the same global equivalence ratio but different mass flow rates is carried out to investigate the resultant impact on detonation wave characteristics and RDRE global performance. Multiple co-rotating detonation waves with spatially-distributed wave structure and preferential alignment with the inner wall of the annulus (due to asymmetry in fuel distribution) are encountered under both conditions. Both cases exhibit pre-detonation deflagrative burning in the fill region, while one of the cases shows higher susceptibility to backflow into the feed plenums due to lower plenum pressures. Furthermore, heat release analysis shows that the thrust obtained from the RDRE is closely linked to the distribution of total heat release between detonative and deflagrative combustion. On the other hand, combustion efficiency is associated with the fraction of heat release occurring in fuel-rich versus fuel-lean regions within the RDRE.

33 ADVANCED PROPULSION SYSTEMS↗

Resolution-induced anisotropy in large-eddy simulations

Large-eddy simulation (LES) of turbulence in complex geometries and domains is often conducted with high-aspect-ratio resolution cells of varying shapes and orientations. The effects of such anisotropic resolution are often simplified or neglected in subgrid model formulations. In this study, we examine resolution-induced anisotropy and demonstrate that even for isotropic turbulence, anisotropic resolution induces mild resolved Reynolds stress anisotropy and significant anisotropy in second-order resolved velocity gradient statistics. In large-eddy simulations of homogeneous isotropic turbulence with anisotropic resolution, it is shown that commonly used subgrid models, including those that consider resolution anisotropy in their formulation, perform poorly. The one exception is the anisotropic minimum dissipation model proposed by Rozema et al. [Phys. Fluids 27, 085107 (2015)]. A simple model is presented here that is an anisotropic eddy diffusivity extension of the “Kolmogorov expression” eddy viscosity of Carati et al. [A family of dynamic models for large-eddy simulation, in Annual Research Briefs, Center for Turbulence Research (Stanford University and NASA AMES, 1995), pp. 35–40] that depends explicitly on the anisotropy of the resolution. It also performs well and is remarkable because, unlike other LES subgrid models, the eddy diffusivity only depends on statistical characteristics of the turbulence (in this case, the dissipation rate), not on fluctuating quantities. In other subgrid modeling formulations, such as the dynamic procedure, limiting flow dependence to statistical quantities in this way could have advantages.

42 ENGINEERING↗

Assessing the mechanisms governing the daytime evolution of marine stratocumulus using large‐eddy simulation

Large‐eddy simulation (LES) output for a case of thin stratocumulus off the coast of California is examined in a mixed‐layer analysis framework to identify the specific mechanisms responsible for governing the evolution of the cloud system. An equation for cloud‐base height tendency isolates the individual cloud‐modulating mechanisms that control the evolution of boundary‐layer liquid‐water static energy ( S l ) and total water mixing ratio ( q T ). With a suitable spin‐up procedure, the control simulation performs admirably compared with observed estimates of liquid water content, vertical velocity variance, and radiative fluxes sampled during an aircraft field campaign. Investigation of the cloud response to various environmental forcing scenarios was addressed through a suite of sensitivity simulations, including variations in subsidence velocity, surface fluxes, wind shear near the inversion, and radiative forcing. In the control simulation, rising cloud‐base tendencies are associated with entrainment warming/drying and short‐wave absorption, whereas lowering cloud‐base tendencies are driven by long‐wave cooling. Even in the presence of substantial afternoon solar heating, entrainment fluxes remained active. The thin cloud demonstrated unexpected resiliency, with mixed‐layer analysis indicating that, as the short‐wave flux decreases later in the afternoon, the relative contribution of long‐wave cooling often becomes large enough to offset entrainment warming/drying and result in a reversal of cloud‐base tendency. The evolution of cloud‐base tendency is found to be insensitive to the net radiative flux divergence for most of the simulations (liquid water path ranging from ~10–50 g/m 2 ). Error analysis in comparison with LES S l and q T budgets suggests that our method of entrainment flux calculation could be improved by a more complete understanding of entrainment‐layer physics.

McMichael, Lucas A.↗

Gyrokinetic large eddy simulations

The large eddy simulation approach is adapted to the study of plasma microturbulence in a fully three-dimensional gyrokinetic system. Ion temperature gradient driven turbulence is studied with the GENE code for both a standard resolution and a reduced resolution with a model for the sub-grid scale turbulence. A simple dissipative model for representing the effect of the sub-grid scales on the resolved scales is proposed and tested. Once calibrated, the model appears to be able to reproduce most of the features of the free energy spectra for various values of the ion temperature gradient.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Large-Eddy Simulation of Wind-Plant Aerodynamics

In this work, we present results of a large-eddy simulation of the 48 multi-megawatt turbines composing the Lillgrund wind plant. Turbulent inflow wind is created by performing an atmospheric boundary layer precursor simulation, and turbines are modeled using a rotating, variable-speed actuator line representation. The motivation for this work is that few others have done large-eddy simulations of wind plants with a substantial number of turbines, and the methods for carrying out the simulations are varied. We wish to draw upon the strengths of the existing simulations and our growing atmospheric large-eddy simulation capability to create a sound methodology for performing this type of simulation. We used the OpenFOAM CFD toolbox to create our solver. The simulated time-averaged power production of the turbines in the plant agrees well with field observations, except with the sixth turbine and beyond in each wind-aligned. The power produced by each of those turbines is overpredicted by 25-40%. A direct comparison between simulated and field data is difficult because we simulate one wind direction with a speed and turbulence intensity characteristic of Lillgrund, but the field observations were taken over a year of varying conditions. The simulation shows the significant 60-70% decrease in the performance of the turbines behind the front row in this plant that has a spacing of 4.3 rotor diameters in this direction. The overall plant efficiency is well predicted. This work shows the importance of using local grid refinement to simultaneously capture the meter-scale details of the turbine wake and the kilometer-scale turbulent atmospheric structures. Although this work illustrates the power of large-eddy simulation in producing a time-accurate solution, it required about one million processor-hours, showing the significant cost of large-eddy simulation.

17 WIND ENERGY↗

Large-eddy simulations of the Northeastern US coastal marine boundary layer

In this study, large eddy simulations (LES) of offshore boundary layers near the Nantucket coast are performed using Nalu-Wind. The marine boundary layer conditions are chosen to match the predominantly unstable and neutral conditions measured by the Cape Wind platform. The appropriate domain, resolution, and boundary condition settings required for the LES are established through this work. Differences between stable and unstable cases are found in the wind speed profiles, averaged statistics, and wind spectra, and explained in terms of stratification effects.

54 ENVIRONMENTAL SCIENCES↗

Developing and testing capabilities for simulating cases with heterogeneous land/water surfaces in a novel atmospheric large eddy simulation code

Large eddy simulations (LES) are the primary computational tool used to simulate high Reynolds number three-dimensional turbulent flows. In the context of earth system sciences, particularly atmospheric science, LES are uniquely able to resolve the scales of atmospheric motion that are key for building process-level understanding of boundary layer turbulence, atmosphere-surface interaction, clouds, and cloud-aerosol-chemistry interaction, and are a core limited-area modeling capability. Increasing demands are being placed on LES code bases as growing high performance computing resources allow LES to address a wider range of scientific problems. In addition, LES are emerging as a source of high-quality machine learning training data. These demands necessitate an agile and extensible code base that allows the model to quickly adapt to emergent needs. However, LES have largely relied on legacy Fortran code bases that lack flexibility. A new, Python-based LES capability called Predicting INteractions of Aerosol and Clouds in Large Eddy Simulation (PINACLES) has been developed as part of the Department of Energy’s Earth System Model Development (ESMD) program area’s Enabling Aerosol-cloud interactions at Global convection-permitting scalES (EAGLES) project. PINACLES was developed from the ground up with a philosophy of maximizing scientific throughput, by attempting to optimize for both model throughput and software extensibility. The initial development of PINACLES delivered a state-of-the-art idealized LES capability solving the non-hydrostatic anelastic equations of motion with doubly periodic boundary conditions and idealized homogenous surface boundary conditions. Here we provide a final report on the outcomes of a fiscal year 2021 Seed Laboratory Directed Research Project that extended PINACLES in two key ways. First, PINACLES was coupled to a state-of-the-art land surface model enabling it to simulate spatially inhomogeneous land-atmosphere interactions that are known to control key atmospheric processes. Second, the dynamical core of PINACLES was modified to permit non-periodic boundary conditions. This model enhancement enables simulation of realistic cases with boundary conditions prescribed from atmospheric reanalysis and enables nested simulations conducted on a hierarchy of computational domains with increasing resolution. Together, these extensions to PINACLES make it a formidable modeling capability and expand its potential application to diverse components of DOE’s atmospheric science portfolio.

42 ENGINEERING↗

Large eddy simulation and laser diagnostic studies on a low swirl stratified premixed flame

This paper presents numerical simulations and laser diagnostic experiments of a swirling lean premixed methane/air flame with an aim to compare different Large Eddy Simulations (LES) models for reactive flows. An atmospheric-pressure laboratory swirl burner has been developed wherein lean premixed methane/air is injected in an unconfined low-speed flow of air. The flame is stabilized above the burner rim in a moderate swirl flow, triggering weak vortex breakdown in the downstream direction. Both stereoscopic (3-component) PIV and 2-component PIV are used to investigate the flow. Filtered Rayleigh scattering is used to examine the temperature field in the leading flame front. Acetone-Planar Laser Induced Fluorescence (PLIF) is applied to examine the fuel distribution. The experimental data are used to assess two different LES models; one based on level-set G-equation and flamelet chemistry, and the other based on finite rate chemistry with reduced kinetics. The two LES models treat the chemistry differently, which results in different predictions of the flame dynamic behavior and statistics. Yet, great similarity of flame structures was predicted by both models. The LES and experimental data reveal several intrinsic features of the low swirl flame such as the W-shape at the leading front, the highly wrinkled fronts in the shear layers, and the existence of extinction holes in the trailing edge of the flame. The effect of combustion models, the numerical solvers and boundary conditions on the flame and flow predictions was systematically examined. (author)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Large Eddy Simulations of Floating Offshore Wind Turbine Wakes with Coupled Platform Motion: Preprint

The growing prospect for large farms of floating offshore wind turbines requires a better understanding of wake effects for floating turbines, particularly the differences when compared to fixed-bottom turbine wakes. The increased range of motion of floating platforms can influence wake characteristics, affecting downstream turbines. In this work, large eddy simulations with an actuator line model are used to study downstream wake characteristics of the NREL 5-MW reference turbine mounted on the OC3-UMaine spar platform for several different metocean conditions. The simulations are carried out in the Simulator fOr Wind Farm Applications coupled with OpenFAST for the platform and turbine motion. The downstream wake characteristics of the floating platform are compared to equivalent fixed-bottom cases for different wind speeds, wave heights, wind-wave alignments, and turbine yaw angles. Overall, the differences in wake shape between floating and fixed platforms are associated with mean platform displacements, while differences in turbulence are associated with time-varying platform motion. However, these observed wake differences between fixed and floating platforms are small, especially for higher wind speeds and lower wave heights.

17 WIND ENERGY↗

FAST.Farm Development and Validation of Structural Load Prediction Against Large Eddy Simulations

FAST.Farm is a mid-fidelity engineering tool developed by the National Renewable Energy Laboratory targeted at accurately and efficiently predicting wind turbine power production and structural loading in wind farm settings, including wake interactions between turbines. FAST.Farm is based on several principles of the dynamic wake meandering (DWM) model, but also addresses limitations of previous DWM implementations. Previous FAST.Farm studies have shown the similarities and differences between FAST.Farm and large eddy simulations for rigid turbine cases. The objective of this work is to quantify the ability of FAST.Farm to accurately predict turbine structural response in a small wind farm. This is done by comparing FAST.Farm structural response to SOWFA-OpenFAST results for three laterally-aligned turbines. The purpose of this study is to characterize the similarities and differences between FAST.Farm and a higher fidelity model for predicting turbine structural response in a wind farm for differing atmospheric inflows. Strong statistical agreement was found between FAST.Farm and SOWFA-OpenFAST structural response for the non-waked upstream turbine, and good agreement was found for the downstream turbines for most structural quantities. Higher differences were seen for downstream turbines with low ambient turbulence intensity or yawed turbines, suggesting areas for FAST.Farm wake dynamics modeling improvements. For all cases and turbines, small statistical differences were seen between blade deflections and bending moments, with larger differences for tower-top and tower-base bending moments. Overall, the results establish confidence for applying FAST.Farm to wind farm power and loads analyses and identify areas where further model validations and model improvements should be targeted.

49 EE - Wind and Water Power Program - Wind (EE-4W↗

Large-Eddy Simulations of Idealized Atmospheric Boundary Layers Using Nalu-Wind

Accurate prediction of wind-plant performance relies, in part, on properly characterizing the turbulent atmospheric boundary layer (ABL) flow in which wind turbines operate. Large-eddy simulation (LES) is a powerful tool for simulating ABLs because it resolves the largest, most energetic scales of three-dimensional turbulent motions. Yet LES predictions are well known to depend on modeling choices such as grid resolution, numerical discretization schemes, and closures for unresolved scales of turbulence. Here, we evaluate how these choices influence predictions of ABL winds using Nalu-Wind, a wind-specific fork of the open-source, generalized, unstructured, massively parallel flow solver NaluCFD/Nalu.

17 WIND ENERGY↗

Large eddy simulation of extinction and reignition with artificial neural networks based chemical kinetics

Large eddy simulation (LES) of a non-premixed, temporally evolving, syngas/air flame is performed with special emphasis on speeding-up the sub-grid chemistry computations using an artificial neural networks (ANN) approach. The numerical setup for the LES is identical to a previous direct numerical simulation (DNS) study, which reported considerable local extinction and reignition physics, and hence, offers a challenging test case. The chemical kinetics modeling with ANN is based on a recent approach, and replaces the stiff ODE solver (DI) to predict the species reaction rates in the subgrid linear eddy mixing (LEM) model based LES (LEMLES). In order to provide a comprehensive evaluation of the current approach, additional information on conditional statistics of some of the key species and temperature are extracted from the previous DNS study and are compared with the LEMLES using ANN (ANN-LEMLES, hereafter). The results show that the current approach can detect the correct extinction and reignition physics with reasonable accuracy compared to the DNS. The syngas flame structure and the scalar dissipation rate statistics obtained by the current ANN-LEMLES are provided to further probe the flame physics. It is observed that, in contrast to H{sub 2}, CO exhibits a smooth variation within the region enclosed by the stoichiometric mixture fraction. The probability density functions (PDFs) of the scalar dissipation rates calculated based on the mixture fraction and CO demonstrate that the mean value of the PDF is insensitive to extinction and reignition. However, this is not the case for the scalar dissipation rate calculated by the OH mass fraction. Overall, ANN provides considerable computational speed-up and memory saving compared to DI, and can be used to investigate turbulent flames in a computationally affordable manner. (author)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

NEK5000 Assessment Milestone Report: Single-Phase Natural Circulation using Direct Numerical Simulation (DNS) & Large Eddy Simulation (LES) Methods

This study evaluates the capabilities of the NEK5000 open-source code as an alternative to the commercially available software that is currently heavily relied upon. The first three case studies initiated the author with (1) the syntax and flow of the program, (2) varying initial and boundary conditions and (3) geometries of greater complexity & dimension. Case 1 studies transient conjugate heat transfer in the entry region of a pipe. Cases 2 & 3 simulate the natural convection flow in an enclosed differentially heated cavity (DHC) of two and three dimensions, respectively. The final case study, Case 4, produces three-dimensional single-phase natural convective flow using the Boussinesq approximation within a simplified representation of an aqueous homogeneous reactor system. The Boussinesq flow in Case 4 clearly depicts both Rayleigh-Taylor and Kelvin-Helmholtz instabilities qualitatively during post-processing analysis. Further analysis of Case 4, up to the point of a quasi-steady state (i.e. thermal-equilibrium condition), is done using the LES solver method in NEK5000. The volume-averaged solution temperatures, when compared between solvers, showed no significant difference. Due to its minimal compromise in fidelity of solution resolution and inexpensive computing cost, compared to the DNS solver, the LES solver is recommended for the current application. Methodology development for the four case studies are reported and a preliminary optimization study with different polynomial resolutions for Case 4 is addressed as a resource when performing future simulations using NEK5000. Hence, this report can be used as a reference starting point to the end user of NEK5000 for natural circulation phenomena in nuclear reactor safety applications.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗