Search NASA⌕ Search

SEARCH · Search NASA

Results for “Large Hadron Collider (LHC)”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Time-dependent signals of new physics at the LHC

The Large Hadron Collider (LHC) is sensitive to signals of beyond the Standard Model physics through a variety of channels including missing energy and resonance searches. In most searches, the new physics and the Standard Model backgrounds are assumed to be invariant in time, up to systematic effects from the experiment. However, new physics with a time variation would provide an additional handle to separate signal from background. Such a time variation may come from ultralight dark matter coupling to an oscillating background field. In this paper, we consider an interaction of dark matter with quarks and an additional heavy particle, and show that the sensitivity of a search that uses timing information at the LHC can be up to a factor of two stronger compared to one that does not use time information.

Fieg, Max H. [Fermilab] (ORCID:0000000270276921)↗
DOE OSTI2022

Performance Before and After Irradiation of Pixelated 3D Silicon Sensors for the HL-LHC CMS Tracker

The Large Hadron Collider (LHC) particle accelerator at European Center for Nuclear Research (CERN) will be shut down starting in 2026 to achieve the High Luminosity Large Hadron Collider (HL-LHC) upgrade. The upgrade will allow for higher fluences, in order to increase the probability of detecting increasingly rare particles, and to obtain higher precision measurements of known particles. To accommodate the new accelerator conditions, many aspects of the Compact Muon Solenoid (CMS) detector will be upgraded; of particular interest for this thesis are the silicon pixel detectors located in the inner tracker. These will be replaced and upgraded to accommodate the higher fluences of the HL-LHC upgrade, as well as to replace existing sensors which have sustained radiation damage. In order for the new sensors to operate under high luminosity conditions, they must be increasingly radiation hard, and in order to detect rare particles, they must be increasingly more precise. The performance of one Centro Nacional de Microelectronica (CNM) 3D silicon sensor before and after undergoing irradiation at fluences similar to those which will be observed at the HL-LHC was investigated to determine radiation hardness and precision. Data was collected at Fermi National Laboratory (Fermilab), in the Fermi National Laboratory Test Beam Facility (FTBF) silicon tracker telescope, which can be used to determine the number of particles, and tracks made by high energy protons passing through. The sensor was also irradiated at Fermilab in the Irradiation Test Area (ITA). Prior to data collection a tuning procedure is carried out to determine ideal bias voltage operating conditions, mask noisy and dead pixels, adjust to the ideal threshold, and map sensor gain. Data is then collected at the FTBF, where the sensor is installed in the center of the FTBF silicon telescope. Variables, including angle and bias voltage, are varied throughout data collection. Data is then processed using an alignment software to determine the exact telescope geometry, along with the tracks which were observed passing through the sensor and telescope. Sensor performance was found to be comparable before and after irradiation, with irradiated results showing slightly lower efficiencies and cluster sizes. Position resolution is comparable both before and after irradiation, and similar distributions of cluster shape are observed. After irradiation, the sensor shows increasing collected charge with bias, an indication of increased width of the depletion region. Peak charge pre-irradiation is higher than post-irradiation peak charge, indicating the irradiated results are not taken under fully-depleted conditions.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2023

The Forward Physics Facility at the High-Luminosity LHC

High energy collisions at the High-Luminosity Large Hadron Collider (LHC) produce a large number of particles along the beam collision axis, outside of the acceptance of existing LHC experiments. The proposed Forward Physics Facility (FPF), to be located several hundred meters from the ATLAS interaction point and shielded by concrete and rock, will host a suite of experiments to probe standard model (SM) processes and search for physics beyond the standard model (BSM). In this report, we review the status of the civil engineering plans and the experiments to explore the diverse physics signals that can be uniquely probed in the forward region. FPF experiments will be sensitive to a broad range of BSM physics through searches for new particle scattering or decay signatures and deviations from SM expectations in high statistics analyses with TeV neutrinos in this low-background environment. High statistics neutrino detection will also provide valuable data for fundamental topics in perturbative and non-perturbative QCD and in weak interactions. Experiments at the FPF will enable synergies between forward particle production at the LHC and astroparticle physics to be exploited. We report here on these physics topics, on infrastructure, detector, and simulation studies, and on future directions to realize the FPF’s physics potential.

47 OTHER INSTRUMENTATION↗
DOE OSTI2021

The Large Hadron–Electron Collider at the HL-LHC

The Large Hadron–Electron Collider (LHeC) is designed to move the field of deep inelastic scattering (DIS) to the energy and intensity frontier of particle physics. Exploiting energy-recovery technology, it collides a novel, intense electron beam with a proton or ion beam from the High-Luminosity Large Hadron Collider (HL-LHC). The accelerator and interaction region are designed for concurrent electron–proton and proton–proton operations. This report represents an update to the LHeC’s conceptual design report (CDR), published in 2012. It comprises new results on the parton structure of the proton and heavier nuclei, QCD dynamics, and electroweak and top-quark physics. It is shown how the LHeC will open a new chapter of nuclear particle physics by extending the accessible kinematic range of lepton–nucleus scattering by several orders of magnitude. Due to its enhanced luminosity and large energy and the cleanliness of the final hadronic states, the LHeC has a strong Higgs physics programme and its own discovery potential for new physics. Building on the 2012 CDR, this report contains a detailed updated design for the energy-recovery electron linac (ERL), including a new lattice, magnet and superconducting radio-frequency technology, and further components. Challenges of energy recovery are described, and the lower-energy, high-current, three-turn ERL facility, PERLE at Orsay, is presented, which uses the LHeC characteristics serving as a development facility for the design and operation of the LHeC. An updated detector design is presented corresponding to the acceptance, resolution, and calibration goals that arise from the Higgs and parton-density-function physics programmes. This paper also presents novel results for the Future Circular Collider in electron–hadron (FCC-eh) mode, which utilises the same ERL technology to further extend the reach of DIS to even higher centre-of-mass energies.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2026

Data-driven method to estimate contamination from light ion beam transmutation at colliders

Collisions of relativistic light ions, such as oxygen, neon, and magnesium, have been proposed as a way to examine the system-size dependence of dynamics typically associated with the quark-gluon plasma produced in collisions of heavier ions such as xenon, gold, or lead. Recent efforts at both the Relativistic Heavy Ion Collider (RHIC) and Large Hadron Collider (LHC) have produced large datasets of proton-oxygen, oxygen-oxygen, and neon-neon collisions, catalyzing intense interest in experimental backgrounds associated with light-ion collisions. In particular, electromagnetic dissociation of light ions while they are circulating in a collider can result in beam contamination that is difficult to simulate precisely. Here we propose a data-driven method for evaluating the potential impact of beam contaminants on physics analyses. The method exploits the time dependence and smaller size of contaminant ion species to define control regions that can be used to quantify potential contamination effects. A simple model is used to illustrate the method and to study its robustness. Furthermore, this method can inform studies of recent LHC and RHIC data and could also be useful for future light-ion programs at the LHC and beyond.

Beam loss↗
DOE OSTI2025

A data-driven method to estimate contamination from light ion beam transmutation at colliders

Collisions of relativistic light ions such as oxygen, neon, and magnesium, have been proposed as a way to examine the system-size dependence of dynamics typically associated with the quark-gluon plasma produced in collisions of heavier ions such as xenon, gold, or lead. Recent efforts at both the Relativistic Heavy Ion Collider (RHIC) and Large Hadron Collider (LHC) have produced large datasets of proton-oxygen, oxygen-oxygen, and neon-neon collisions, catalyzing intense interest in experimental backgrounds associated with light ion collisions. In particular, electromagnetic dissociation of light ions while they are circulating in a collider can result in beam contamination that is difficult to simulate precisely. Here we propose a data-driven method for evaluating the potential impact of beam contaminants on physics analyses. The method exploits the time-dependence and smaller size of contaminant ion species to define control regions that can be used to quantify potential contamination effects. A simple mode

Accelerator Physics (physics.acc-ph)↗
DOE OSTI2025

Conformal collider physics meets LHC data

The remarkably high energies of the Large Hadron Collider (LHC) have allowed for the first measurements of the shapes and scalings of multipoint correlators of energy flow operators, ⟨ Ψ | E ( n → 1 ) E ( n → 2 ) ⋯ E ( n → k ) | Ψ ⟩ , providing new insights into the Lorentzian dynamics of quantum chromodynamics (QCD). In this letter, we use recent advances in effective field theory to derive a rigorous factorization theorem for the light-ray density matrix, ρ = | Ψ ⟩ ⟨ Ψ | , inside high transverse momentum jets at the LHC. Using the light-ray operator product expansion, the scaling behavior of multipoint correlators can be computed from the expectation value of the twist-2 spin- J light-ray operators, O [ J ] , in this state, Tr [ ρ O [ J ] ] . We compute the light-ray density matrix at next-to-leading order, and combine this with results for the next-to-leading logarithmic scaling behavior of the correlators up to six-points, comparing with CMS open data. This theoretical accuracy allows us to resolve the quantum scaling dimensions of QCD light-ray operators inside jets at the LHC. Our factorization theorem for the light-ray density matrix at the LHC completes the link between recent developments in the study of energy correlators and LHC phenomenology, opening the door to a wide variety of precision jet substructure studies. Published by the American Physical Society 2025

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2025

The environmental impact, carbon emissions and sustainability of computing in the ATLAS experiment

ATLAS, a general-purpose experiment at the Large Hadron Collider (LHC), makes use of a large internationally-distributed computing infrastructure, including over 10 6 TB of managed data on disk and tape and almost one million simultaneously running CPU cores. Upgrades for the High-Luminosity LHC (HL-LHC) will increase the required computing resources by a factor of 3–4 by the beginning of the 2030s, and by an order of magnitude before the conclusion of data taking at the beginning of the 2040s. These resources are spread over around 100 computing sites worldwide. Efforts are underway within the experiment to evaluate and mitigate various aspects of the environmental impact of the sites, with the additional long-term goal of making recommendations to the sites that will significantly reduce the total expected environmental impact in the HL-LHC era. These efforts take several forms: building awareness in the experiment community, adjusting aspects of the computing policy, and modifications of data center configurations, either in ways that take advantage of particular features of ATLAS workloads or in generic ways that reduce the environmental impact of the computing resources. This paper describes the ongoing investigations and approaches that have already provided useful and actionable outcomes.

Aad, G. [CNRS/IN2P3] (ORCID:0000000266654934)↗
DOE OSTI2024

Beam-induced backgrounds measured in the ATLAS detector during local gas injection into the LHC beam vacuum

Inelastic beam-gas collisions at the Large Hadron Collider (LHC), within a few hundred metres of the ATLAS experiment, are known to give the dominant contribution to beam backgrounds. These are monitored by ATLAS with a dedicated Beam Conditions Monitor (BCM) and with the rate of fake jets in the calorimeters. These two methods are complementary since the BCM probes backgrounds just around the beam pipe while fake jets are observed at radii of up to several metres. In order to quantify the correlation between the residual gas density in the LHC beam vacuum and the experimental backgrounds recorded by ATLAS, several dedicated tests were performed during LHC Run 2. Local pressure bumps, with a gas density several orders of magnitude higher than during normal operation, were introduced at different locations. The changes of beam-related backgrounds, seen in ATLAS, are correlated with the local pressure variation. In addition the rates of beam-gas events are estimated from the pressure measurements and pressure bump profiles obtained from calculations. Using these rates, the efficiency of the ATLAS beam background monitors to detect beam-gas events is derived as a function of distance from the interaction point. These efficiencies and characteristic distributions of fake jets from the beam backgrounds are found to be in good agreement with results of beam-gas simulations performed with theFluka Monte Carlo programme.

43 PARTICLE ACCELERATORS↗
DOE OSTI2024

Estimation of the Chances to Find New Phenomena at the LHC in a Model-Agnostic Combinatorial Analysis

In this paper, we estimate the number of event topologies that have the potential to be produced in 𝑝𝑝 collisions at the Large Hadron Collider (LHC) without violating kinematic and other constraints. We use numerical calculations and combinatorics, guided by large-scale Monte Carlo simulations of Standard Model (SM) processes. Then, we set the upper limit on the probability that new physics may escape detection, assuming a model-agnostic approach. The calculated probability is unexpectedly large, and the fact that LHC has not found new physics until now is not entirely surprising. Theoretical limitations and experimental challenges in observing new physics within the studied exclusive event classes are examined.

BSM↗
DOE OSTI2023

Efficient and Robust Jet Tagging at the LHC with Knowledge Distillation

The challenging environment of real-time data processing systems at the Large Hadron Collider (LHC) strictly limits the computational complexity of algorithms that can be deployed. For deep learning models, this implies that only models with low computational complexity that have weak inductive bias are feasible. To address this issue, we utilize knowledge distillation to leverage both the performance of large models and the reduced computational complexity of small ones. In this paper, we present an implementation of knowledge distillation, demonstrating an overall boost in the student models' performance for the task of classifying jets at the LHC. Furthermore, by using a teacher model with a strong inductive bias of Lorentz symmetry, we show that we can induce the same inductive bias in the student model which leads to better robustness against arbitrary Lorentz boost.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2025

Impact of LHC precision measurements of inclusive jet and dijet production on the CTEQ-TEA global PDF fit

In this study, we investigate the impact of new Large Hadron Collider (LHC) inclusive jet and dijet measurements on parton distribution functions (PDFs) that describe the proton structure, with a particular focus on the gluon distribution at large momentum fraction, x , and the corresponding partonic luminosities. We assess constraints from these datasets using next-to-next-to-leading-order (NNLO) theoretical predictions, accounting for a range of uncertainties from scale dependence and numerical integration. From the scale choices available for the calculations, our analysis shows that the central predictions for inclusive jet production show a smaller scale dependence than dijet production. We examine the relative constraints on the gluon distribution provided by the inclusive jet and dijet distributions, and also explore the phenomenological implications for inclusive H , t t ¯ , and t t ¯ H production at the LHC at 14 TeV. Published by the American Physical Society 2025

Ablat, Alim (ORCID:0009000519877755)↗
DOE OSTI2022

Feasibility of crystal-assisted collimation in the CERN accelerator complex

Bent silicon crystals mounted on high-accuracy angular actuators were installed in the CERN Super Proton Synchrotron (SPS) and extensively tested to assess the feasibility of crystal-assisted collimation in circular hadron colliders. The adopted layout was exploited and regularly upgraded for about a decade by the UA9 Collaboration. The investigations provided the compelling evidence of a strong reduction of beam losses induced by nuclear inelastic interactions in the aligned crystals in comparison with amorphous orientation. A conceptually similar device, installed in the betatron cleaning insertion of CERN Large Hadron Collider (LHC), was operated through the complete acceleration and storage cycle and demonstrated a large reduction of the background leaking from the collimation region and radiated into the cold sections of the accelerator and the experimental detectors. The implemented layout and the relevant results of the beam tests performed in the SPS and in the LHC with stored proton and ion beams are extensively discussed.

43 PARTICLE ACCELERATORS↗
DOE OSTI2025

Relaxation times for disoriented isospin condensates in high energy heavy ion collisions

Fluctuations between charged and neutral kaons measured by the ALICE Collaboration in Pb-Pb collisions at the CERN Large Hadron Collider (LHC) exceed conventional explanations. Previously it was shown that if the scalar condensate is accompanied by an electrically neutral isospin-1 field then the combination can produce large equilibrium fluctuations where ⟨$\overline{𝑢}$ ⁢𝑢⟩≠⟨ $\overline{𝑑}$𝑑⟩. Hadronizing strange and antistrange quarks might then strongly fluctuate between charged ($\overline{𝑢}$⁢𝑠 or $\overline{𝑠}$⁢𝑢) and neutral (𝑑⁢$\overline{𝑠}$⁢ or 𝑠⁢$\overline{𝑑}$) kaons. Here, we estimate the times for the condensates to achieve their equilibrium probability distributions within causal volumes in high energy heavy ion collisions. This is achieved by modeling the temperature dependence of the condensates, mesonic collective excitations, decay rates of the associated fields, and employing the Langevin and Fokker-Planck equations. Within this model, we find that the equilibration times are short compared with the expansion time, making disoriented isospin condensates a viable explanation for the anomalous fluctuations observed at the LHC.

Quark-gluon plasma↗
DOE OSTI2024

Foundations of automatic feature extraction at LHC–point clouds and graphs

Abstract Deep learning algorithms will play a key role in the upcoming runs of the Large Hadron Collider (LHC), helping bolster various fronts ranging from fast and accurate detector simulations to physics analysis probing possible deviations from the Standard Model. The game-changing feature of these new algorithms is the ability to extract relevant information from high-dimensional input spaces, often regarded as “replacing the expert” in designing physics-intuitive variables. While this may seem true at first glance, it is far from reality. Existing research shows that physics-inspired feature extractors have many advantages beyond improving the qualitative understanding of the extracted features. In this review, we systematically explore automatic feature extraction from a phenomenological viewpoint and the motivation for physics-inspired architectures. We also discuss how prior knowledge from physics results in the naturalness of the point cloud representation and discuss graph-based applications to LHC phenomenology.

Bhardwaj, Akanksha↗
DOE OSTI2024

Distributed Machine Learning Workflow with PanDA and iDDS in LHC ATLAS

Machine Learning (ML) has become one of the important tools for High Energy Physics analysis. As the size of the dataset increases at the Large Hadron Collider (LHC), and at the same time the search spaces become bigger and bigger in order to exploit the physics potentials, more and more computing resources are required for processing these ML tasks. In addition, complex advanced ML workflows are developed in which one task may depend on the results of previous tasks. How to make use of vast distributed CPUs/GPUs in WLCG for these big complex ML tasks has become a popular research area. In this paper, we present our efforts enabling the execution of distributed ML workflows on the Production and Distributed Analysis (PanDA) system and intelligent Data Delivery Service (iDDS). First, we describe how PanDA and iDDS deal with large-scale ML workflows, including the implementation to process workloads on diverse and geographically distributed computing resources. Next, we report real-world use cases, such as HyperParameter Optimization, Monte Carlo Toy confidence limits calculation, and Active Learning. Finally, we conclude with future plans.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2024

Operation and performance of the ATLAS tile calorimeter in LHC Run 2

The ATLAS tile calorimeter (TileCal) is the hadronic sampling calorimeter covering the central region of the ATLAS detector at the Large Hadron Collider (LHC). This paper gives an overview of the calorimeter’s operation and performance during the years 2015–2018 (Run 2). In this period, ATLAS collected proton–proton collision data at a centre-of-mass energy of 13 TeV and the TileCal was 99.65% efficient for data-taking. The signal reconstruction, the calibration procedures, and the detector operational status are presented. The performance of two ATLAS trigger systems making use of TileCal information, the minimum-bias trigger scintillators and the tile muon trigger, is discussed. Studies of radiation effects allow the degradation of the output signals at the end of the LHC and HL-LHC operations to be estimated. Finally, the TileCal response to isolated muons, hadrons and jets from proton–proton collisions is presented. The energy and time calibration methods performed excellently, resulting in good stability and uniformity of the calorimeter response during Run 2. The setting of the energy scale was performed with an uncertainty of 2%. The results demonstrate that the performance is in accordance with specifications defined in the Technical Design Report.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗