SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
The redox properties of a Co II –porphyrin complex are tuned via Lewis acid binding to a pendant aza-crown ether and changes to the solution ionic strength.
Binding of Lewis acidic metal ions and Brønsted acid at the metal–oxo group of high-valent metal–oxo complexes enhances their reactivities significantly in oxidation reactions. However, such a binding of Lewis acids and proton at the metal–oxo group has been questioned in several cases and remains to be clarified. In this work, we report the synthesis, characterization, and reactivity studies of a mononuclear manganese(IV)–oxo complex binding triflic acid, {[(dpaq)Mn IV (O)]–HOTf} + (1–HOTf). First, 1–HOTf was synthesized and characterized using various spectroscopic techniques, including resonance Raman (rRaman) and X-ray absorption spectroscopy/extended X-ray absorption fine structure. In particular, in rRaman experiments, we observed a linear correlation between the Mn–O stretching frequencies of 1–HOTf (e.g., ν Mn–O at ~793 cm –1 ) and 1–M n+ (Mn + = Ca 2+ , Zn 2+ , Lu 3+ , Al 3+ , or Sc 3+ ) and the Lewis acidities of H + and M n+ ions, suggesting that H+ and Mn+ bind at the metal–oxo moiety of [(dpaq)Mn IV (O)] + . Interestingly, a single-crystal structure of 1–HOTf was obtained by X-ray diffraction analysis, but the structure was not an expected Mn(IV)–oxo complex but a Mn(IV)–hydroxide complex, [(dpaq)Mn IV (OH)](OTf) 2 (4), with a Mn–O bond distance of 1.8043(19) Å and a Mn–O stretch at 660 cm –1 . More interestingly, 4 reverted to 1–HOTf upon dissolution, demonstrating that 1–HOTf and 4 are interconvertible depending on the physical states, such as 1–HOTf in solution and 4 in isolated solid. The reactivity of 1–HOTf was investigated in hydrogen atom transfer (HAT) and oxygen atom transfer (OAT) reactions and then compared with those of 1–Mn+ complexes; an interesting correlation between the Mn–O stretching frequencies of 1–HOTf and 1–M n+ and their reactivities in the OAT and HAT reactions is reported for the first time in this study.
The activation of C–H bonds using first-row transition metals poses a formidable challenge in the development of sustainable catalytic methods. Early/late heterobimetallic complexes provide a Lewis acidic binding site for directing groups, facilitating the activation of C–H bonds at an appended first-row transition metal center. In this work, the reactivity of the ZrIV/Co–I heterobimetallic complexes (THF)(I)Zr(XylNP i Pr 2 ) 2 Co(PR 3 ) (1-PR 3 ; Xyl = 3,5-dimethylphenyl; PR 3 = PMe 3 , PPh 2 Me) toward directed C–H bond activation is explored with pyridine and terminal alkyne derivatives. 1-PMe 3 reacts reversibly with 4-methylpyridine to afford the C–H activated complex (4-Me-C 5 H 4 N)(I)Zr(XylNP i Pr 2 ) 2 (μ-4-Me-C 5 H 3 N)Co(PMe 3 )(H) (3-PMe 3 ). By using the more Lewis basic substrate 4-tert-butylpyridine, (I)Zr(XylNP i Pr 2 )2(μ-4- t Bu-C 5 H 3 N)Co(PMe 3 )(H) (4-PMe 3 ) is formed irreversibly. In addition to pyridine derivatives, 1-PPh 2 Me can activate the C–H bond of terminal alkynes to form (THF)(I)Zr(XylNPiPr 2 ) 2 (μ-R'C≡C)Co(PPh 2 Me)(H) (R' = Ph (5-PPh 2 Me); R' = SiMe 3 (6-PPh 2 Me)).
Herein it is well known that catalytic centers containing the zinc(II) ion can act as both Lewis and Bronsted-Lowry acids. In addition to coordination number, the Zn coordination geometry can also strongly impact the acidity of the active site, no matter what measure of acidity is considered. Herein, we report the first pentacoordinate, zinc-ammonia complex containing a pyridine based tetraazamacrocycle, [(pyclen)Zn(NH 3 )](PF 6 ) 2 , that has applications in Lewis acid catalysis. From this structure, we obtain binding energies and acidities for a series of related pyclen and cross-bridged cyclen type tetraazamacrocycles comprising the pentacoordinate N 4 Zn(II)–OH 2 entity, collectively referred to as [(R-cyclen)Zn–OH 2 ] 2+ . Results from gas- and aqueous-phase density functional theory (M05-2X) and ab initio (MP2) calculations reported herein demonstrate that molecular geometry has a substantial influence on both the Zn–OH x binding strengths and the deprotonation energy of coordinated H 2 O, but not necessarily in a predicable way. While generally more constrained N–Zn–N coordination leads to greater Zn–OH 2 binding energies (Lewis acidities), the corresponding Lewis acidities of the complexes don’t always correlate with the Zn–OH 2 bond lengths nor the (Bronsted) acidity of the coordinated H 2 O. Additionally, the order of the Lewis acid strength of the [(R-cyclen)Zn(II)] complexes changes as the basic –OH 2 ligand is replaced with its –OH counterpart.
A series of dinuclear molecular copper complexes were prepared and used to model the binding and Lewis acid stabilization of CO in heterogeneous copper CO 2 reduction electrocatalysts. Experimental studies (including measurement of rate and equilibrium constants) and electronic structure calculations suggest that the key kinetic barrier for CO binding may be a σ-interaction between CuI and the incoming CO ligand. The rate of CO coordination can be increased upon the addition of Lewis acids or electron-withdrawing substituents on the ligand backbone. Conversely, K eq for CO coordination can be increased by adding electron density to the metal centers of the compound, consistent with stronger π-backbonding. Lastly, the electrochemically measured kinetic results were mapped onto an electrochemical zone diagram to illustrate how these system changes enabled access to each zone.
Abstract Although F‐Containing molecules and macromolecules are often used in molecular biology to increase the binding with Lewis acidic groups by introducing favorable C−F dipoles, there is virtually no experimental evidence and limited understanding of the nature of these interactions, especially their role in synthetic polymeric materials. These studies elucidate the molecular origin of inter‐ and intra‐Chain interactions responsible for self‐healing of F‐Containing copolymers composed of pentafluorostyrene and n‐butyl acrylate units (p(PFS/nBA). Guided by dynamic surface oscillating force (SOF) and spectroscopic measurements supported by molecular dynamics (MD) simulations, these studies show that the reformation of σ‐σ orbitals in −C−F of PFS and CH 3 CH 2 − of nBA units enables the recovery of entropic energy via fluorophilic‐σ‐lock van der Waals forces when PFS/nBA molar ratios are ~50/50. The strength of these interactions determined experimentally for self‐healable PFS/nBA compositions is in the order ~0.3 kcal/mol which primarily comes from fluorophilic‐σ‐lock (~70 %) contributions. These interactions are significantly diminished for non‐self‐healable counterparts. Strongly polarized −C−F σ orbitals create lateral dipolar forces enhancing the affinity towards −C−H orbitals, facilitating energetically favorable interactions. Entropic recovery driven by non‐Covalent bonding offers a valuable tool in designing materials with unique functionalities, particularly self‐healable batteries and energy storage devices.
Although F-Containing molecules and macromolecules are often used in molecular biology to increase the binding with Lewis acidic groups by introducing favorable C−F dipoles, there is virtually no experimental evidence and limited understanding of the nature of these interactions, especially their role in synthetic polymeric materials. These studies elucidate the molecular origin of inter- and intra-Chain interactions responsible for self-healing of F-Containing copolymers composed of pentafluorostyrene and n-butyl acrylate units (p(PFS/nBA). Guided by dynamic surface oscillating force (SOF) and spectroscopic measurements supported by molecular dynamics (MD) simulations, these studies show that the reformation of σ-σ orbitals in −C−F of PFS and CH 3 CH 2 − of nBA units enables the recovery of entropic energy via fluorophilic-σ-lock van der Waals forces when PFS/nBA molar ratios are ~50/50. The strength of these interactions determined experimentally for self-healable PFS/nBA compositions is in the order ~0.3 kcal/mol which primarily comes from fluorophilic-σ-lock (~70 %) contributions. These interactions are significantly diminished for non-self-healable counterparts. Strongly polarized −C−F σ orbitals create lateral dipolar forces enhancing the affinity towards −C−H orbitals, facilitating energetically favorable interactions. Entropic recovery driven by non-Covalent bonding offers a valuable tool in designing materials with unique functionalities, particularly self-healable batteries and energy storage devices.
High-valent nonheme Fe IV –oxido species are key intermediates in biological oxidation, and their properties are proposed to be influenced by the unique microenvironments present in protein active sites. Microenvironments are regulated by noncovalent interactions, such as hydrogen bonds (H-bonds) and electrostatic interactions; however, there is little quantitative information about how these interactions affect crucial properties of high valent metal–oxido complexes. To address this knowledge gap, we introduced a series of Fe IV –oxido complexes that have the same S = 2 spin ground state as those found in nature and then systematically probed the effects of noncovalent interactions on their electronic, structural, and vibrational properties. The key design feature that provides access to these complexes is the new tripodal ligand [poat] 3– , which contains phosphinic amido groups. An important structural aspect of [Fe IV poat(O)] - is the inclusion of an auxiliary site capable of binding a Lewis acid (LA II ); we used this unique feature to further modulate the electrostatic environment around the Fe–oxido unit. Experimentally, studies confirmed that H-bonds and LA II s can interact directly with the oxido ligand in Fe IV –oxido complexes, which weakens the Fe=O bond and has an impact on the electronic structure. Additionally, we found that relatively large vibrational changes in the Fe–oxido unit correlate with small structural changes that could be difficult to measure, especially within a protein active site. Our work demonstrates the important role of noncovalent interactions on the properties of metal complexes, and that these interactions need to be considered when developing effective oxidants.
Organophosphorus compounds, including nerve agents and pesticides, represent a class of toxic chemicals causing harm to troops, civilians, and the environment. Metal–organic frameworks (MOFs) have emerged as a class of highly porous, crystalline, tunable materials adept at both capturing and catalytically neutralizing these harmful toxins. In particular, MOFs whose nodes display strong Lewis acidic character can hydrolyze such chemicals nearly instantaneously. However, without the help of a basic buffer to regenerate the active site, the benign organophosphorus product strongly binds to the node and prevents catalyst turnover. Here, we investigate a series of MOFs whose nodes contain metals of varying Lewis acidities and employ isothermal titration calorimetry (ITC) to directly measure the heat from the binding of an organophosphorus probe molecule, allowing the construction of a full thermodynamic binding profile (ΔH, ΔS, ΔG, K a ). We couple this with potentiometric titrations and solid state 31 P magic angle spinning (MAS) NMR to gain a clearer picture of how node identity, structure, and Lewis acidity interplay to impact binding strength and favorability. Furthermore, this study is the first to integrate these three complementary techniques to investigate binding interactions in MOFs, further showcasing the viability of ITC for probing MOF systems, which is still relatively underexplored.
This work elucidates a long-standing unexplained paradox commonly observed within the polymerization of α-olefin using palladium (Pd)(II)–diimine catalysts, in which isomerization and living polymerization of α-olefins are both observed. With a classical mechanistic understanding of these complexes, this behavior is often dismissed and interpreted as experimental error. Herein, we present a comprehensive mechanistic investigation into this phenomenon that supports the existence of a novel mechanistic pathway for Pd(II)–diimine complexes. Part one of the mechanistic study lays the foundation of the proposed mechanism, in which neutral Pd(II)–diimine complexes were found to exhibit a moderate to good catalytic activity for olefin isomerization of α-olefins despite the established notion that catalyst activation is required. Extensive experimental and computational studies reveal the possibility of a partial dissociation of the diimine ligand, which frees up one coordination site and enables coordination–insertion. This finding is significant as the coexistence of two reactive coordination sites at the palladium center becomes a valid proposal for the activated cationic Pd(II)–diimine complexes. In part two, we examined and validated the simultaneously observed α-olefin isomerization and living polymerization using the cationic Pd(II)–diimine catalyst, which supports the presence of two independent reaction pathways of isomerization and polymerization, respectively. Furthermore, the addition of a strong Lewis acid, such as AlCl 3 , accelerates the ligand dissociation and the consequential isomerization as it weakens the palladium–nitrogen bond through competitive binding. In part three, Lewis acid-triggered olefin isomerization-polymerization is employed to prepare living olefinic block copolymers and further synthesize novel polyolefin-polar block copolymers with unique architectures, distinct levels of branching, crystallinity, and polar functionality in a one-pot manner.
Light-weighting vehicular components through adoption of light-metal structural alloys holds promise for reducing the fuel consumption of internal combustion engine vehicles and increasing the range of battery electric vehicles. However, the alloyed microstructure and surface precipitates of aluminum alloys render these materials susceptible to corrosion under modest excursions from neutral pH. Traditional chromium-based anodic passivation layers are subject to increasingly stringent environmental regulations, whereas options for sacrificial cathodic films are sparse for electropositive metals. While hybrid nanocomposite coatings have shown initial promise, mechanistic underpinnings remain poorly understood. Here, a fully imidized polyetherimide (PEI) resin is utilized as the continuous phase with inclusion of unfunctionalized exfoliated graphite (UFG). A comprehensive investigation of the mechanisms of corrosion protection reveals key fundamental design principles underpinning corrosion inhibition. First, strong interfacial adhesion, which for PEI is facilitated by binding of imide carbonyl moieties to Lewis acidic sites on Al surfaces. Second, the miscibility of ion-impervious nanoscopic UFG fillers and stabilization of a substantial interphase region at UFG/PEI boundaries that result in minimizing the free volume at the filler/polymer interface. Finally, extended tortuosity of ion diffusion pathways imbued by the below-percolation-threshold 2D fillers. These three design principles help govern and modulate ion transport from electrolyte/coating interfaces to the coating/metal interface and are crucial for the extended preservation of barrier properties. The results suggest an approach to systematically activate multiple modes of corrosion inhibition through rational design of hybrid nanocomposite coatings across hard-to-abate sectors where light metal alloys are likely to play an increasingly prominent role.
Abstract not provided
We report the synthesis, characterization, and iodine capture application of a novel thorium–organic nanotube, TSN-626, [Th 6 O 4 (OH) 4 (C 6 H 4 NO 2 ) 7 (CHO 2 ) 5 (H 2 O) 3 ]·3H 2 O. The classification as a metal–organic nanotube (MONT) distinguishes it as a rare and reduced dimensionality subset of metal–organic frameworks (MOFs); the structure is additionally hallmarked by low node connectivity. TSN-626 is composed of hexameric thorium secondary building units and mixed O/N-donor isonicotinate ligands that demonstrate selective ditopicity, yielding both terminating and bridging moieties. Because hard Lewis acid tetravalent metals have a propensity to bind with electron donors of rival hardness (e.g., carboxylate groups), such Th–N coordination in a MOF is uncommon. However, the formation of key structural Th–N bonds in TSN-626 cap some of the square antiprismatic metal centers, a position usually occupied by terminal water ligands. TSN-626 was characterized by using complementary analytical and computational techniques: X-ray diffraction, vibrational spectroscopy, N 2 physisorption isotherms, and density functional theory. TSN-626 satisfies design aspects for the chemisorption of iodine. The synergy between accessibility through pores, vacancies at the metal–oxo nodes, and pendent N-donor sites allowed a saturated iodine loading of 955 mg g –1 by vapor methods. Furthermore, the crystallization of TSN-626 diversifies actinide–MOF linker selection to include soft electron donors, and these Th–N linkages can be leveraged for the investigation of metal-to-ligand bonding and unconventional topological expressions.
The behavior of Lewis acidic metal ions in multimetallic systems has become a subject of intense interest in recent years. Parametrizing the behavior of these ions in non-aqueous conditions, commonly used in the field, is challenging due to the lack of direct measures of the Lewis acidity of metal ions in polar organic solvents. Here, we report the use of triphenylphosphine oxide (TPPO) as a 31 P nuclear magnetic resonance (NMR) probe to quantify the Lewis acidity of a library of metal triflate salts using the Gutmann-Beckett method. Plots of the pK a values of the corresponding metal-aqua species, [M(H 2 O) m ] n+ , measured in H 2 O vs. the 31 P NMR shifts of TPPO in the presence of these metals in deuterated acetonitrile (d3-MeCN) and deuterated dichloromethane (CD 2 Cl 2 ) display tightly co-linear relationships, suggesting similar behavior for these ions in water, d 3 -MeCN, and CD 2 Cl 2 . This collinearity reinforces the utility of the common approach of using the aqueous pK a values as a descriptor of Lewis acidity, regardless of the solvent used in the immediate experiments, and provides an insight into the usefulness of this descriptor in wide-ranging applications. Titration studies in d 3 -MeCN suggest 1:1 binding of TPPO with monovalent ions, greater than 1:1 binding with divalent ions, and formation of multiple species with the highly Lewis acidic trivalent ions. Altogether, these data suggest that both aqueous pK a values and other single-measurement descriptors, while useful, provide only a snapshot of the influence of Lewis acidity on multimetallic chemical systems.
The availability of heavy metals in terrestrial environments is largely controlled by their interactions with minerals and organic matter, with iron minerals having a particularly strong role in heavy metal fate. Because soil organic matter contains a variety of compounds that differ in their chemical properties, the underlying impact organic matter-soil mineral associations bestow on heavy metal binding is still unresolved. Here, we systematically examine the binding of Cd, Zn and Ni by a suite of organic-ferrihydrite assemblages, chosen to account for various compound chemistries within soil organic matter. We posited that organic compound functionality would dictate the extent of association with the organic-ferrihydrite assemblages. Increased heavy metal binding to the assemblages was observed and attributed to the introduction of additional binding sites by the organic functional groups with differing metal affinities. Furthermore, the relative increase depended on the metal's Lewis acidity and followed the order Cd > Zn > Ni, whereas the reverse order was obtained for metal binding by pristine ferrihydrite (Ni > Zn > Cd). Citric acid-, aspartic acid- and cysteine-ferrihydrite assemblages also enhanced the metal binding rate. X-ray absorption spectroscopy revealed that the organic coating contributed significantly to Zn binding by the assemblages, despite relatively low organic surface coverage. Our findings provide valuable information on the nature of heavy metal-organic-mineral interactions and metal adsorption processes regulating their bioavailability and transport.
C-Nitroso compounds (RNO, R = alkyl and aryl) are byproducts of drug metabolism and bind to heme proteins, and their heme-RNO adducts are isoelectronic to ferrous nitroxyl (NO-/HNO) complexes. Importantly, heme-HNO compounds are key intermediates in the reduction of NO to N 2 O and nitrite to ammonium in the nitrogen cycle. Ferrous heme-RNO complexes act as stable analogs of these species, potentially allowing for the investigation of the vibrational and electronic properties of unstable heme-HNO intermediates. In this paper, a series of six-coordinate ferrous heme-RNO complexes (where R = iPr and Ph) were prepared using the TPP 2- and 3,5-Me-BAFP 2- co-ligands, and tetrahydrofuran, pyridine, and 1-methylimidazole as the axial ligands (bound trans to RNO). These complexes were characterized using different spectroscopic methods and X-ray crystallography. The complex [Fe(TPP)(THF)(iPrNO)] was further utilized for nuclear resonance vibrational spectroscopy (NRVS), allowing for the detailed assignment of the Fe–N(R)O vibrations of a heme-RNO complex for the first time. The vibrational properties of these species were then correlated with those of their HNO analogs, using DFT calculations. Our studies support previous findings that RNO ligands in ferrous heme complexes do not elicit a significant trans effect. In addition, the complexes are air-stable, and do not show any reactivity of their RNO ligands towards NO. So although ferrous heme-RNO complexes are suitable structural and electronic models for their HNO analogs, they are unsuitable to model the reactivity of heme-HNO complexes. We further investigated the reaction of our heme-RNO complexes with different Lewis acids. Here, [Fe(TPP)(THF)(iPrNO)] was found to be unreactive towards Lewis acids. In contrast, [Fe(3,5-Me-BAFP)(iPrNO) 2 ] is reactive towards all of the Lewis acids investigated here, but in most cases the iron center is simply oxidized, resulting in the loss of the iPrNO ligand. In the case of the Lewis acid B 2 (pin) 2 , the reduced product [Fe(3,5-Me-BAFP)(iPrNH 2 )(iPrNO)] was identified by X-ray crystallography.
Density functional theory benchmarked by correlated molecular orbital theory is used to develop a fundamental and predictive understanding of the interaction of thorium oxide nanoclusters with gas phase water to provide insight into nuclear-waste storage, production of thorium nuclear reactor fuels, and reprocessing of spent fuel. The structures of Th n O 2n (n = 3 – 6) clusters and their interactions with water have been studied at the B3LYP, MP2, and CCSD(T) levels. Hydrolysis is initiated by the formation of Lewis acid-base adducts, with relative H 2 O binding energies (physisorption) ranging from −15 kcal/mol to −22 kcal/mol. The initial H 2 O physisorption energy is ca. −21 kcal/mol regardless of the cluster size and is consistent with the experimentally obtained initial adsorption energy on a thorium dioxide surface. The physisorption enthalpies for additional water molecules can be affected by the presence of terminal groups OH groups generated by proton transfer to a Th-O near the site of adsorption. The hydrolysis products (chemisorption) form either bridging or terminal hydroxides. More exothermic hydrolysis steps were predicted for the formation of terminal hydroxides as compared to the formation of bridging hydroxides. Here, the calculated transition state barriers for transfer of protons from bound water complexes to form the chemisorption products are very low. Overall, water readily reacts with thorium oxide clusters preferring hydroxide products over hydrated complexes. First and second order fits were predicted for the combined physisorption and chemisorption energies for the hydrolysis of thorium oxide clusters. Finally, ionization energies and electron affinities were calculated as were HOMO-LUMO gaps to provide additional insights into the properties of the thorium oxide and hydroxide clusters.
While the bis(trifluoromethylsulfonyl)imide anion (TFSI – ; formula [N(SO 2 CF 3 ) 2 ] – ) has been noted for its practical utility, the use of TFSI – salts as sources of Lewis acidic metal cations for studies of cation-driven tuning effects has not been reported. Here, the effective Lewis acidity of mono-, di-, and trivalent cations (namely, K + , Na + , Li + , Ba 2+ , Ca 2+ , Mg 2+ , Zn 2+ , La 3+ , Y 3+ , Lu 3+ , and Sc 3+ ) in the form of their TFSI – salts is described, along with quantitative comparisons to salts of several other weakly coordinating anions (namely, SO 3 CF 3 – , PF 6 – , and BArF 24 – ). Triphenylphosphine oxide (TPPO) was used as a 31 P NMR probe in titration experiments for quantification of key parameters describing the effective Lewis acidity of the salts in acetonitrile (CH 3 CN) solutions. Notably, the TFSI – salts of di- and trivalent cations were found to display strong binding to TPPO with significant speciation and were found to be quite hygroscopic. Taken together, the measurements demonstrate that TFSI – salts are systematically better/stronger effective Lewis acids than their triflate analogues. And, considering the excellent solubility of TFSI – salts, these materials appear attractive for further use and development in Lewis-acidity-dependent applications, including catalysis and tuning of multimetallic materials.