Search NASA⌕ Search

SEARCH · Search NASA

Results for “Lignin-derived monomers”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

9 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Lignin-Derived Phenolic Compounds and Water Are Effective Cosolvents for Reductive Catalytic Fractionation

Reductive catalytic fractionation (RCF) is an effective lignin-first biorefining method to extract lignin as a stabilized oil from lignocellulosic biomass. To realize RCF at scale, process modeling has shown that minimizing the use of exogenous organic solvents is critical. To this end, here we investigate the ability of lignin-derived monomers to act as either solvents or cosolvents for RCF. We begin by examining the influence of lignin-derived aromatic compounds (4-propylguaiacol, 4-propylphenol, and propylbenzene) on RCF monomer yields and subsequently extend our analysis to mixtures of 4-propylguaiacol and either methanol or water. Here, we demonstrate that 4-propylguaiacol is an effective solvent for lignin extraction and depolymerization during RCF, especially when used in combination with water as a cosolvent. Cosolvent mixtures of 4-propylguaiacol and water enable up to 81% lignin extraction, monomer yields up to 25 wt %, and postreaction phase separation. However, unlike methanol, water as a cosolvent fails to inhibit aromatic ring hydrogenation when conducted over Ru/C as a catalyst, potentially leading to excess hydrogen consumption in a process utilizing this approach. Nonetheless, these results suggest a promising strategy for eliminating external organic solvents from RCF by utilizing mixtures of lignin-derived compounds and water as alternative extraction solvents.

09 BIOMASS FUELS↗
DOE OSTI2026

Tabulated data for Lignin-Derived Phenolic Compounds and Water Are Effective Cosolvents for Reductive Catalytic Fractionation

Reductive catalytic fractionation (RCF) is an effective lignin-first biorefining method to extract lignin as a stabilized oil from lignocellulosic biomass. To realize RCF at scale, process modeling has shown that minimizing the use of exogenous organic solvents is critical. To this end, here we investigate the ability of lignin-derived monomers to act as either solvents or cosolvents for RCF. We begin by examining the influence of lignin-derived aromatic compounds (4-propylguaiacol, 4-propylphenol, and propylbenzene) on RCF monomer yields and subsequently extend our analysis to mixtures of 4-propylguaiacol and either methanol or water. We demonstrate that 4-propylguaiacol is an effective solvent for lignin extraction and depolymerization during RCF, especially when used in combination with water as a cosolvent. Cosolvent mixtures of 4-propylguaiacol and water enable up to 81% lignin extraction, monomer yields up to 25 wt %, and postreaction phase separation. However, unlike methanol, water as a cosolvent fails to inhibit aromatic ring hydrogenation when conducted over Ru/C as a catalyst, potentially leading to excess hydrogen consumption in a process utilizing this approach. Nonetheless, these results suggest a promising strategy for eliminating external organic solvents from RCF by utilizing mixtures of lignin-derived compounds and water as alternative extraction solvents. This is the tabulated data for the paper

biorefining↗
DOE OSTI2026

Calculation of monomer yields, verification of PG concentration approximation, catalyst comparison for neat aromatic RCF, SEM micrographs for postreaction pulps, yields of aqueous-phase sugar derivatives after PG-H2O RCF, reactor pressure transients, GPC comparing pre- and postreaction organic solvent composition, PG-H2O miscibility testing, GPC probing dimer/oligomer fractionation in PG-H2O mixtures for

Reductive catalytic fractionation (RCF) is an effective lignin-first biorefining method to extract lignin as a stabilized oil from lignocellulosic biomass. To realize RCF at scale, process modeling has shown that minimizing the use of exogenous organic solvents is critical. To this end, here we investigate the ability of lignin-derived monomers to act as either solvents or cosolvents for RCF. We begin by examining the influence of lignin-derived aromatic compounds (4-propylguaiacol, 4-propylphenol, and propylbenzene) on RCF monomer yields and subsequently extend our analysis to mixtures of 4-propylguaiacol and either methanol or water. We demonstrate that 4-propylguaiacol is an effective solvent for lignin extraction and depolymerization during RCF, especially when used in combination with water as a cosolvent. Cosolvent mixtures of 4-propylguaiacol and water enable up to 81% lignin extraction, monomer yields up to 25 wt %, and postreaction phase separation. However, unlike methanol, water as a cosolvent fails to inhibit aromatic ring hydrogenation when conducted over Ru/C as a catalyst, potentially leading to excess hydrogen consumption in a process utilizing this approach. Nonetheless, these results suggest a promising strategy for eliminating external organic solvents from RCF by utilizing mixtures of lignin-derived compounds and water as alternative extraction solvents.

biorefining↗
DOE OSTI2026

Lignin-Derived Phenolic Compounds and Water Are Effective Cosolvents for Reductive Catalytic Fractionation

Reductive catalytic fractionation (RCF) is an effective lignin-first biorefining method to extract lignin as a stabilized oil from lignocellulosic biomass. To realize RCF at scale, process modeling has shown that minimizing the use of exogenous organic solvents is critical. To this end, here we investigate the ability of lignin-derived monomers to act as either solvents or cosolvents for RCF. We begin by examining the influence of lignin-derived aromatic compounds (4-propylguaiacol, 4-propylphenol, and propylbenzene) on RCF monomer yields and subsequently extend our analysis to mixtures of 4-propylguaiacol and either methanol or water. We demonstrate that 4-propylguaiacol is an effective solvent for lignin extraction and depolymerization during RCF, especially when used in combination with water as a cosolvent. Cosolvent mixtures of 4-propylguaiacol and water enable up to 81% lignin extraction, monomer yields up to 25 wt %, and postreaction phase separation. However, unlike methanol, water as a cosolvent fails to inhibit aromatic ring hydrogenation when conducted over Ru/C as a catalyst, potentially leading to excess hydrogen consumption in a process utilizing this approach. Nonetheless, these results suggest a promising strategy for eliminating external organic solvents from RCF by utilizing mixtures of lignin-derived compounds and water as alternative extraction solvents.

biorefining↗
DOE OSTI2025

Cleavage of C-O and C-C Bonds in Lignin-Derived Compounds to Produce Aromatics Using Molybdenum-Containing MFI Zeolites

Lignin, the most abundant source of renewable arenes, is a viable feedstock for the production of aromatic compounds. However, the prevalence of resilient C-C bonded oligomeric fragments in lignin-derived streams can compromise monomer yields during reductive catalytic fractionation (RCF). To address this issue, we developed a bifunctional molybdenum-containing MFI (Mo/H-MFI) zeolite catalyst capable of cleaving both C-O and C-C bonds in lignin-derived molecules to produce aromatic monomers. Using propylguaiacol as a model compound, we demonstrated the importance of proximity between metallic molybdenum carbide sites and the Bronsted acid sites in the zeolite in achieving high carbon yields (~80%) of benzene, toluene, propylbenzene, and phenol while maintaining catalyst stability (>98% stable conversion for 20 h). A reaction network involving both C-O and C-C bond cleavage pathways was proposed based on kinetic studies using key intermediates as feeds. Finally, we successfully depolymerized partially deoxygenated lignin oil obtained from the RCF of poplar using a continuous, two-pass catalytic process. This work highlights the potential of the bifunctional Mo/H-MFI catalyst in upgrading complex lignin feedstocks and provides a methodological approach for converting lignin-derived compounds into platform aromatic chemicals.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Dual-function lignin monomers enable high-performance graphene electrodes via interface confinement and proton transfer enhancement

Graphene oxide (GO)-based energy storage faces dual bottlenecks: unsustainable reduction methods and sluggish proton transfer kinetics. Here, we introduce a groundbreaking green strategy using lignin-derived vanillyl alcohol (VA) as a dual-function monomer to simultaneously address these challenges. By thermally annealing GO/VA films at mild temperatures (<100 °C), VA triggers an interface-confined reduction of GO while self-polymerizing into redox-active oligomers (P-VA) that intercalate between graphene layers. This dual role-reducing agent and proton highway enables a 3D conductive network with minimized graphene restacking, abundant redox sites, and rapid H + transport pathways. Density Functional Theory (DFT) reveals how P-VA optimizes proton dynamics, while the resulting rGO-P-VA4-T90 electrode achieves a record volumetric capacitance of 311.1F/cm 3 (777.8F/cm 2 ) and retains 87.8 % capacity after 10,000 cycles. Flexible solid-state supercapacitors deliver 94.2 μWh/cm 2 energy density at 63.8 μW/cm 2 , rivaling state-of-the-art devices. Furthermore, this work redefines sustainable graphene engineering, merging biomass valorization with high-performance energy storage in a scalable, eco-friendly paradigm.

Graphene oxide reduction↗
DOE OSTI2025

Chemical Diversity of Oligomers in Biomass Fast Pyrolysis Oils, Part 2: Heavy Lignin-Derived Molecules and Highly Dehydrated Sugars from Dichloromethane-Insoluble Pyrolytic Lignin

Here, this paper, the second in a series, investigates the water-insoluble, dichloromethane (DCM)-insoluble residue of BTG pyrolysis oil, also known in the literature as high-molecular-weight pyrolytic lignin (HMW-PL). HMW-PL accounts for 9.2 wt % of the original bio-oil, which is known to increase upon aging and contribute to coke formation during bio-oil upgrading. Understanding its composition is crucial for managing pyrolysis oil during the processing. The HMW-PL was fractionated using a silica gel column with solvents of increasing polarity: ethyl acetate (EA), acetone (AC), isopropanol (ISO), and methanol (MeOH), yielding 49.2, 19.9, 8.2, and 8.1 wt %, respectively. Each subfraction was characterized by UV-fluorescence, FTIR, HSQC NMR, and (−)APCI-FT-Orbitrap MS. Analysis revealed that the EA subfraction primarily contained aromatic dimers (C 19 –C 20 ) and trimers (C 17 –C 13 ), while the MeOH subfraction was rich in oxygenated aliphatic monomers (C 8 –C 16 ) likely derived from sugar dehydration products. The resulting fractions were further separated via preparatory HPLC. Fifty-five candidate molecular structures were proposed based on the Orbitrap MS data, supported by UV-fluorescence, FTIR, and NMR results. This fractionation strategy defined four distinct subfractions, enabling the proposal of surrogate molecular structures and advancing the molecular-level understanding of the HMW-PL fraction in the pyrolysis bio-oil.

High-Molecular-Weight PL↗
DOE OSTI2025

Lignin-Derived Methoxyterephthalates for Performance-Advantaged Polymers and Plasticizers

Lignin-derived aromatic carboxylic acids can be produced from oxidative catalytic processes and are promising building blocks for performance-advantaged bioproducts that leverage their inherent heteroatom functionalities. Here, we synthesize 2-methoxyterephthalate and 2,6-dimethoxyterephthalate derivatives by electrochemical carboxylation of guaiacyl- and syringyl-derived lignin monomers obtained from the oxidative deconstruction of lignin. These methoxylated terephthalates are evaluated as comonomers in poly(ethylene terephthalate) (PET) and as plasticizers that could replace petrochemically-derived isophthalate and phthalate, respectively. Specifically, we copolymerize 2-methoxy- and 2,6-dimethoxyterephthalate with dimethyl terephthalate to form several PET copolymers, both of which enable the properties of PET to be tuned, with an incorporation beyond 25% producing amorphous polyesters. At 10 mol % loading in the copolymers, we demonstrate that the bioderived comonomers exhibit comparable behavior to isophthalic acid, a commonly used comonomer in PET, by lowering the crystallinity and melting temperature. Moreover, methoxyterephthalate esters (2-ethylhexyl and butyl) are compared to phthalate and terephthalate ester counterparts used as poly(vinyl chloride) (PVC) plasticizers. The bioderived plasticizers are comparable to the petroleum-derived incumbents in reducing the glass transition temperature and increasing the thermal stability of PVC. Furthermore, the dimethoxyterephthalic esters are expected to have an extended lifetime in the polymer matrix due to their lower volatility and lower diffusion coefficients calculated by molecular dynamic simulations. These results demonstrate that the isophthalate and phthalate components in polyesters and plasticizers, respectively, could be substituted with biobased methoxyterephthalate derivatives.

09 BIOMASS FUELS↗
DOE OSTI2025

The anaerobic fungus Neocallimastix californiae shifts metabolism and produces melanin in response to lignin-derived aromatic compounds

Biological deconstruction of lignocellulose for sustainable chemical production offers an opportunity to harness evolutionarily specialized enzymes and organisms for industrial bioprocessing. While hydrolysis of cellulose and hemicellulose by CAZymes yields fermentable sugars, ligninolysis releases a heterogeneous mix of aromatic compounds that likely play a crucial role in shaping microbial communities and microbial metabolism. Here, we interrogated the metabolomic and transcriptomic response of a lignocellulolytic anaerobic fungus, Neocallimastix californiae, to a heterogeneous mixture of aromatic compounds derived from lignin. Through exposing the fungus to both a concentration it might experience in its native environment and an elevated concentration of alkaline lignin, we observe that N. californiae transforms vanillin and that supplying alkaline lignin at 0.125 g/L, alongside cellulose, enhances the growth and polysaccharide-degrading activity of N. californiae. Altogether, our results further suggest that vanillin consumption, increased polymer-degrading activity, increased metabolic activity, and transcriptomic remodeling of amino acid synthesis genes all coincide with increased melanin production by fungal cells. These observations challenge previous notions that aromatics from lignocellulose only inhibit the growth and polymer deconstruction capabilities of the biomass-degrading anaerobic fungi (Neocallimastigomycetes). This study demonstrates that anaerobic fungi have a complex relationship with aromatic chemicals derived from lignin and hemicellulose and shift their metabolism in response to the addition of lignocellulose-derived aromatics to their growth medium. Further, as no known pathways for the biochemical transformation of aromatics were detected in these organisms despite observed transcriptome remodeling in the presence of aromatics, we suggest they might encode novel biochemical routes for scavenging amino acid building blocks from aromatic monomers derived from hemicellulose side chains and lignin.

Anaerobic fungi↗