Search NASA⌕ Search

SEARCH · Search NASA

Results for “Limestone Calcined Clay Cement (LC3)”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

12 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Mechanisms dominating thixotropy in limestone calcined clay cement (LC3)

Limestone calcined clay cement (LC3) is a green binder with great practical importance for the cement industry. Growing application has increased the need to understand the mechanisms governing its thixotropy for better control of workability. While formation of C-S-H bridges is understood to dominate the thixotropy of ordinary Portland cement, LC3 paste displayed unique thixotropy properties. In this study, focused beam reflectance measurement, zeta potential, 1H nuclear magnetic resonance relaxometry and micro X-ray computed tomography were used to track the colloidal interaction and hydration extent within LC3 paste. Results showed that flocculation due to the negative surface charge and water affinity of calcined clay appears to be the dominating factor. This leads to a reduction of water available to contribute to fluidity of the paste and, in turn, governing the development of thixotropy over time. In addition, the dilution effect due to high clinker substitution diminishes thixotropy growth with time.

36 MATERIALS SCIENCE↗
DOE OSTI2021

On the use of limestone calcined clay cement (LC3) in high-strength strain-hardening cement-based composites (HS-SHCC)

Highlights: • Use of LC{sup 3} slightly reduces flowability and shortens the setting time of fresh matrices. • Highly polymerized C-A-S-H gel and abundant ettringite benefit flexural strength of LC{sup 3}-matrices. • Use of LC{sup 3} enhances the bond strength between fiber and high-strength matrix. • LC{sup 3}-based HS-SHCC yields similar flexural performance as the composite with Portland cement. High-strength strain-hardening cement-based composites (HS-SHCC) demonstrate excellent mechanical and durability properties. However, high cement content typical to HS-SHCC results not only in high carbon footprint, but also in excessive hydration heat and severe autogenous shrinkage. In this investigation, Limestone Calcined Clay Cement (LC{sup 3}) was used to produce sustainable HS-SHCC. The LC{sup 3} substitution resulted in higher energy consumption during mixing and in shorter setting times of the fresh, plain matrices. Although the LC{sup 3} substitution slightly reduced the compressive strength, the formation of highly polymerized C-A-S-H gel and abundant ettringite benefited the flexural strength of the plain matrices. Additionally, single-fiber pullout experiments showed that the use of LC{sup 3} led to increased fiber-matrix bond strength and pullout energy. Finally, the replacement of Portland cement by LC{sup 3} resulted in HS-SHCC with similar mechanical performance to the reference composite, indicating a high potential for using LC{sup 3} in high-performance cement-based composites.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Understanding of the factors slowing down metakaolin reaction in limestone calcined clay cement (LC3) at late ages

Factors which could explain the slowing down of the metakaolin reaction in LC{sup 3} blends are investigated. Portlandite availability and the presence of aluminium ions in the pore solution are shown not to be limiting factors. Hydrates can only precipitate in solution filled pores. Internal relative humidity measurements indicate that at 28 days solution is present only in pores with radii below 13 nm. An enhancement of metakaolin reaction was obtained at late ages when the larger capillaries are filled with solution. The lower limit of the water filled pores was more difficult to analyse since there is a lack of precision in determining interfacial energies of hydrates and pore solution of the system. However, this study gives an indication of order of magnitude where the growth of hydrates could be slowed down.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Material processing, microstructure, and composite properties of low carbon Engineered Cementitious Composites (ECC)

Traditional PVA fiber-reinforced Engineered Cementitious Composites (ECC) show high tensile ductility and superior durability with tight crack width, but the high cost and embodied carbon can hinder its wider application in infrastructures. The objective of this study is to develop a better understanding of the fresh and hardened properties of an ECC that employs a lower embodied-carbon binder, Limestone Calcined Clay Cement (LC3), and lower-cost PP fiber that is widely available. Specifically, the interrelations between material processing, microstructure, and composite properties were studied experimentally. The results showed that ECC with high tensile ductility up to 9% tensile strain and tight crack width with 50 μm at 2% tensile strain can be achieved. It was found that a matrix paste with higher viscosity generally enhanced fiber dispersion uniformity and robustness in tensile strain-hardening. The paste viscosity is increased when OPC is replaced by LC3 and can be tuned with superplasticizer content. Larger maximum flaw size leads to lower first crack strength, beneficial for microcrack initiation and multiple cracking. This study generates fundamental knowledge linking processing-microstructure-performance of PP-LC3-ECC. This class of low embodied carbon ECC with tight crack width is expected to contribute to reducing the carbon footprint of the built environment.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Intrinsic self-stressing and low carbon Engineered Cementitious Composites (ECC) for improved sustainability

Highlights: • A self-stressing criterion for ECC was established and experimentally verified. • An intrinsic self-stressing ECC was developed by utilizing LC3 and CSA cement. • Initial maximum expansion and later expansion loss were successfully tailored. • Expansion mechanism was identified by XRD patterns. • Self-stressing ECC has 64% of the carbon footprint of conventional concrete. Engineered Cementitious Composites (ECC) is an emerging cementitious composite material with ultra-high ductility. However, its higher cement dosage limits its material greenness and leads to concerns with drying shrinkage. In this research, an ECC utilizing limestone calcined clay cement (LC3) and calcium sulphoaluminate cement (CSA) is investigated, focusing on minimizing the material's embodied carbon while enhancing its durability with intrinsic self-stressing functionality. A self-stressing criterion is theoretically established and experimentally verified. X-ray diffraction patterns reveal an ettringite quantity that modulates the initial expansion and later expansion-reversal of LC3-CSA-ECC to support a persistent self-stressing mechanism. LC3-CSA-ECC has a lower (64%) carbon footprint and similar embodied energy compared to conventional concrete. When combined with the durability advantage (tiny crack, high ductility of 5.5%, and self-stressing function), this low carbon self-stressing ECC holds promise as a sustainable repair material that lowers the embodied and operational carbon in civil infrastructure.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Development of Calcined Clay/Calcium Sulfate Blends for Robust Performance of LC3 Concrete

This report documents the development of robust blends of calcined clays (CCs) with calcium sulfate (gypsum) for application in limestone calcined clay cement (LC3) systems. The U.S. cement industry faces supply chain constraints and high energy intensity, motivating the need for alternative supplementary cementitious materials. Calcined clays are abundant and highly reactive when properly processed, but their variable physical and chemical characteristics can negatively impact hydration balance, rheology, and admixture demand in LC3 concretes. To address this, five calcined clays, two Portland cements, ground limestone, gypsum, and a polycarboxylate dispersant were procured. Isothermal calorimetry and mini-cone flow tests were used to determine sulfate and dispersant demand. Results show that the addition of approximately 6.7% gypsum, relative to the calcined clay weight, consistently balanced sulfate consumption across the LC3 systems studied. Dispersant demand, however, varied significantly with clay source, demonstrating the need for tailored admixture strategies. These findings confirm that supplying CC–gypsum blends directly to concrete producers is a viable approach to overcoming current manufacturing constraints, enabling reliable fresh and hardened performance of LC3 concretes, and supporting broader adoption of calcined clays in the U.S. market.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Mechanical and self-healing behavior of low carbon engineered cementitious composites reinforced with PP-fibers

While the ultrahigh tensile ductility and superior durability of Engineered Cementitious Composites (ECC) have been demonstrated, the relatively high energy and carbon intensity, as well as high material cost present potential impediments to broader ECC applications. The objective of this research is to develop a more sustainable and cost-effective ECC. The ordinary Portland cement (OPC) and the commonly used PVA fiber in conventional ECC were replaced by limestone calcined clay cement (LC3) and polypropylene (PP) fiber, respectively. The ECC compressive strength, tensile stress-strain relationship, and microcrack self-healing behavior were studied at three water to binder ratios (0.3, 0.2, 0.16). The novel LC3-PP-ECC showed a tensile strain capacity of greater than 6% and an intrinsically tight crack width below 82 μm when loaded to 1% tensile strain. Further, the LC3-PP-ECC demonstrated efficient recovery of the composite tensile ductility and ultimate tensile strength through self-healing. Compared to typical ECC made with OPC and PVA fiber, the material cost, embodied energy and carbon footprint of LC3-PP-ECC are reduced by 61%, 45%, and 48%, respectively. Here, the superior mechanical properties and durability combined with the low environmental impact and cost for material production promote LC3-PP-ECC as a sustainable material for structural and non-structural applications.

42 ENGINEERING↗
DOE OSTI2022

Crack width control and mechanical properties of low carbon engineered cementitious composites (ECC)

Engineered Cementitious Composites (ECC) have superior properties with high tensile ductility and tight crack width compared to conventional concrete. The properties of ECC are significantly influenced by the material composition which can be tailored to enhance the sustainability of ECC. Towards this goal, recycled crumb rubber (CR) and silica fume (SF) were used to tailor the properties of a polypropylene-fiber reinforced ECC with a low carbon binder based on limestone calcined clay cement (LC3) in this study. Crumb rubber was found to be effective in enhancing strain-hardening performance and reducing the width of the multiple microcracks. However, a loss of compressive strength was accompanied by an increasing amount of CR. While silica fume or lower w/b ratio enhanced the compressive strength, the crack width of ECC increased at higher SF content or lower w/b. The underlying mechanisms of these trends were traced to the alteration of the matrix fracture toughness and fiber/matrix interfacial bond. Rubber particle bridging was found to contribute to crack width control. Finally, the combined use of the LC3 green binder and CR led to a lowering of the embodied and operational carbon footprint of ECC.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Sulphate resistance of low‐clinker engineered cementitious composites examined by MicroXRF imaging

Abstract Engineered cementitious composites (ECC) are a class of high‐performing fibre‐reinforced cementitious materials recognised for their increased ductility and durability compared to conventional cement‐based materials, owing to their autogenously controlled tight crack widths, even when subjected to high strains. To reduce ECC's environmental impact, this research examines the use of a low‐clinker binder − limestone‐calcined clay cement (LC3) − as an alternative to portland cement (PC), along with fly ash to further reduce the clinker proportion and the embodied CO 2 of the formulations. In conventional concrete, LC3 hydrates to a denser microstructure resulting from the synergistic reaction between limestone and calcined clay. At the lower water contents typical of ECC and with the presence of fly ash, the influence of the binder composition on the microstructure is difficult to anticipate. To examine the influence of these compositional variables on microstructure, permeability and durability, the sulphate resistance of LC3‐based ECC is explored. Specifically, the ECC‐LC3 blends are designed with high clinker replacement rate of 75% by mass of binder and contain either conventional fly ash or reclaimed fly ash at 50% by mass of binder. Expansion of ECC‐LC3 samples subjected to standard sodium sulphate test conditions was measured up to 12 months and the depth of penetration of sulphates into the ECC‐LC3 of varying compositions was quantified using micro‐X‐Ray Fluorescence (microXRF) imaging and modelling. The expansion results show that the ECC‐LC3 formulations performed better than the PC samples and can provide adequate resistance to external sulphate attack, even when reclaimed fly ashes are used in place of the conventional ash. In addition, the shallow penetration of sulphate into these cementitious composites demonstrates the low diffusion coefficients values that were determined using the quantitative data from MicroXRF imaging.

Microscopy↗
DOE OSTI2023

Advances in imaging, scattering, spectroscopy, and machine learning-aided approaches for multiscale characterization of cementitious systems

Recent progress in methods used in the multiscale characterization of cementitious systems is reviewed, focusing on advances in imaging, scattering, and spectroscopy. The review includes relevant applications and developments in machine learning and other data analytics approaches to enhance characterization. Developments in imaging using light and electron microscopy as well as x-ray (i.e., from synchrotron) methods are summarized. Updates include scanning electron microscopy (SEM), transmission electron microscopy (TEM), tomography, and holography. A critical overview of spectroscopy (e.g., MAS NMR, Raman) and scattering (e.g., neutron, x-ray, synchrotron x-ray) methods is provided, and the intersection of these with imaging is developed (e.g., Raman imaging). Additionally, the paper summarizes recent developments in and implementations of state-of-the-art machine-learning algorithms and data analytics methods for automated, systematic, and/or quantitative analyses of image data sets. The review considers but is not limited to the application of these methods for investigating the hydration and microstructure development of cement phases, low-carbon-footprint cements (e.g., limestone calcined clay cements, LC3), environmental interactions (e.g., ASR) and model systems. Finally, the present work provides a critical presentation of advances in characterization methods that link together the composition and multiscale structure of cementitious materials.

42 ENGINEERING↗
DOE OSTI2022

Development of an Extremely Durable Concrete (EDC) - A Novel approach coupling Chemistry and Autogenous Crack Width Control (Final Report)

Concrete cracking is a challenging issue and a constant threat to the durability of modern physical infrastructure. It is most commonly produced by mechanical loading and environmental deformations endured under field conditions, and structural deterioration accelerates at large crack widths. There is an urgent need for dramatic reductions in O&M cost, energy use, and emissions for infrastructure. The goal of this project is to fundamentally design an Extremely Durable Concrete (EDC) with a life expectancy at least five times that of current concrete by deploying a coupled micromechanical and chemical approach in material design. EDC is expected to embody an autogenously tight crack width (<50μm), high ductility (>3%), and stable chemistry using a green binder based on Limestone Calcined Clay Cement (LC3), which together will produce a resilient formulation with self-healing capability.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Engineered Cementitious Composites (ECC) with limestone calcined clay cement (LC 3 )

Recent research have recognized that coupled use of calcined clay, limestone and cement clinker in concrete is viable to reduce environmental footprints at manufacture and to enhance material durability. In this study, a novel application of the limestone calcined clay cement (LC 3 ) is demonstrated by substituting the Ordinary Portland Cement (OPC) in Engineered Cementitious Composites (ECC). The composite mechanical properties including σ-δ and σ-ε relationships and residual crack widths were evaluated to 28 days under uniaxial tension. Matrix chemistry was characterized using thermogravimetric analysis and X-ray diffraction, while the pore structure of matrices and composites was analyzed using mercury intrusion porosimetry. The LC 3 -based ECC showed more rapid early strength development but lower 28-day strength (~32 MPa) due to a 20% higher water-to-solid ratio for attaining adequate workability and fiber dispersion. Nevertheless, the tensile strain capacity of LC 3 -based ECC achieved over 6% with an average residual crack width less than 50 μm. Additionally, the composite pore structure exhibited a decreasing volume fraction of large pores and voids (>100 nm) after substituting LC 3 for OPC. Here, the use of LC 3 marginally decreased the embodied material energy and cost, but led to about 32% and 28% reductions in CO 2 emissions compared to traditional OPC-based ECC and concrete, respectively. As a preliminary study, LC 3 -based ECC shows promise as a greener ductile concrete compared with OPC-based ECC.

36 MATERIALS SCIENCE↗