Coronae as a Key to Lithospheric Thickness
Explore the source record for details and available documents.
Coronae Lithosphere↗
SEARCH · Search NASA
Results for “Lithospheric Thickness Coronae”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Coronae as a Key to Lithosperic Thickness
Explore the source record for details and available documents.
Lithospheric Thickness Coronae↗
Tectonic patterns and regional stresses near Venusian coronae
A stress analysis of tectonic patterns near Venusian coronae is reported. Combined local corona stresses and uniform regional stresses are used to predict patterns of surface tectonic features. The patterns are compared to those of coronae on Magellan images to determine the regional stress and elastic lithospheric thickness about the coronae. Regional stresses of 0.1-0.6 kbar and elastic lithospheric thicknesses of 10 +/- 5 km are estimated for three specific coronae.
Cyr, K. E.↗
Estimates of lithospheric thickness on Venus
Magellan altimetry data have revealed many examples of topographic flexure on Venus. Modeling of flexural features is of interest as it provides information on spatial (and for the earth, temporal) variations in lithospheric thickness. Lithospheric thickness may be determined solely from modeling topographic flexure or by combining gravity and topography data. On Venus even the highest resolution gravity is insufficient for modeling all but the very longest wavelength flexural features, so we rely heavily on altimetry data for information about lithospheric thickness. Sandwell and Schubert modeled flexure around four coronae and found lithospheric thicknesses h, in the range 35 - 70 km. Studies of several more flexural features suggests that these are typical of Aphrodite Terra and other chasmata regions on Venus. However lithospheric thicknesses associated with other regions are in the range 15-30 km. McKenzie et al. noted that part of Aphrodite Terra appeared similar in planform and morphology to the subduction zones of the East Indies on Earth. Other flexure studies using Magellan data have looked at smaller coronae (h = 5-30 km) and rifts (h = 8-20 km). It can be seen that the range of thicknesses suggested by studies to date is extremely large, and it is difficult to establish whether their mean is in agreement with that predicted by heat flow scaling arguments (h approximately 18 km). Here we present results from a global study of flexure on Venus, with particular emphasis on the variation in our results with different tectonic settings.
Johnson, C. L.↗
Flexural models of trench/outer rise topography of coronae on Venus with axisymmetric spherical shell elastic plates
Magellan altimetry has revealed that many coronae on Venus have trenches or moats around their peripheries and rises outboard of the trenches. This trench/outer rise topographic signature is generally associated with the tectonic annulus of the corona. Sandwell and Schubert have interpreted the trench/outer rise topography and the associated tectonic annulus around coronae to be the result of elastic bending of the Venus lithosphere (though the tectonic structures are consequences of inelastic deformation of the lithosphere). They used two-dimensional elastic plate flexure theory to fit topographic profiles across a number of large coronae and inferred elastic lithosphere thicknesses between about 15 and 40 km, similar to inferred values of elastic thickness for the Earth's lithosphere at subduction zones around the Pacific Ocean. Here, we report the results of using axisymmetric elastic flexure theory for the deformation of thin spherical shell plates to interpret the trench/outer rise topography of the large coronae modeled by Sandwell and Schubert and of coronae as small as 250 km in diameter. In the case of a corona only a few hundred kilometers in diameter, the model accounts for the small planform radius of the moat and the nonradial orientation of altimetric traces across the corona. By fitting the flexural topography of coronae we determine the elastic thickness and loading necessary to account for the observed flexure. We calculate the associated bending moment and determine whether the corona interior topographic load can provide the required moment. We also calculate surface stresses and compare the stress distribution with the location of annular tectonic features.
Moore, W.↗
Gravity over coronae and chasmata on Venus
The global spherical harmonic model of Venus' gravity field MGNP60FSAAP, with horizontal resolution of about 600 km, shows that most coronae have little or no signature in the gravity field. Nevertheless, some coronae and some segments of chasmata are associated with distinct positive gravity anomalies. No corona has been found to have a negative gravity anomaly. The spatial coincidence of the gravity highs over four closely spaced 300- to 400-km-diameter coronae in Eastern Eistla Regio with the structures themselves is remarkable and argues for a near-surface or lithospheric origin of the gravity signals over such relatively small features. Apparent depths of compensation (ADCs) of the prominent gravity anomalies at Artemis, Latona, and Heng-o Coronae are about 150 to 200 km. The geoid/topography ratios (GTRs) at Artemis, Latona, and Heng-o Coronae lie in the range 32 to 35 m/km. The large ADCs and GTRs of Artemis, Latona, and Heng-o Coronae are consistent with topographically related gravity and a thick Venus lithosphere or shallowly compensated topography and deep positive mass anomalies due to subduction of underthrusting at these coronae. At arcuate segments of Hecate and Parga Chasmata ADCs are about 125 to 150 km, while those at Fauta Corona, four coronae in Eastern Eistla Regio, and an arcuate segment of Wester Parga Chasmata are about 75 km. The GTRs at Fauta Corona, the four coronae in eastern Eistla Regio, and the accurate segments of Hecate, Parga, and Western Parga Chasmata are about 12 to 21 m/km. By analogy with gravity anomalies of similar horizontal scale (600 km-several thousand kilometers) on the concave sides of terrestrial subduction zone arcs, which are due in large part to subducted lithosphere, it is inferred that the gravity anomalies on Venus are consistent with retrograde subduction at Artemis Chasma, along the northern and southern margins of Latona Coronam, and elsewhere along Parga and Hecate Chasmata.
Schubert, Gerald↗
Flexural ridges, trenches, and outer rises around coronae on Venus
Flexural signatures outboard of Venusian coronal rims are examined with the purpose of inferring the thickness of the planet's elastic lithosphere. Topographic profiles of several prominent coronae which display clear trench and outer rise signatures are presented. Via a thin elastic plate flexure model to characterize the shape of the trench and outer rise, Venusian flexures are found to be similar in both amplitude and wavelength to lithospheric flexures seaward of subduction zones on earth. It is shown that circumferential fractures are concentrated in areas where the topography is curved downward, in good agreement with the high tensile stress predicted by the flexure models. Two scenarios for the development of the ridge-trench-outer rise flexural topography and circumferential fractures of coronae are presented. The first scenario involves reheating and thermal subsidence of the lithosphere interior to the corona, while the second involves expansion of the corona interior and roll back of the subducting lithosphere exterior to the corona.
Sandwell, David T.↗
Elastic Thickness Estimates for Coronae Associated with Chasmata on Venus
Coronae are large-scale circular tectonic features surrounded by annular ridges. They are generally considered unique to Venus and may offer insights into the differences in lithospheric structure or mantle convective pattern between Venus and Earth. 68% of all coronae are associated with chasmata or fracture belts. The remaining 32% are located at volcanic rises or in the plains. Chasmata are linear to arcuate troughs, with trough parallel fractures and faults which extend for 1000 s of kilometers. Estimates of the elastic thickness of the lithosphere (T(sub e)) have been calculated in a number of gravity/topography studies of Venus and for coronae specifically. None of these studies, however, have explored the dependence of T(sub e) on the tectonic history of the region, as implied from the interpretation of relative timing relationships between coronae and surrounding features. We examine the relationship between the local T(sub e) and the relative ages of coronae and chasmata with the aim of further constraining the origin and evolution of coronae and chasmata systems.
Hoogenboom, T.↗
Proxemy Research Grant NAG5-10263 Closeout Report
Proxemy Research had a grant from NASA to perform science research of upwelling and volcanism on Venus. This was a 5 year Presidential Early Career Award to E. Stofan, entitled "Upwelling and volcanism: Constraints from regional studies and geologic mapping." Here we summarize the scientific progress and accomplishments of this grant. Scientific publications and abstracts of presentations are indicated in the final section. This was a very productive grant and the progress that was made is summarized. Attention is drawn to the publications, abstracts, and talks given in each year. Volcanism and tectonism are the dominant geological processes that have shaped the surface of Venus, as revealed by the Magellan data. However, the development of a global geologic history for Venus has caused considerable debate (e.g., Head and Basilevsky, 1996; Guest and Stofan, 1999). The lack of global time horizons on Venus, such as that provided by impact craters on most bodies and the fossil record on Earth, make developing global stratigraphies for Venus difficult, if not impossible, with current datasets. Before the geologic history of Venus can be determined and used as a constraint on potential lithospheric thickness variations through time, it is necessary to perform detailed stratigraphic studies on a local to regional scale. In addition, detailed studies of specific types of venusian features and terrains, such as coronae, volcanic rises, and large lava flow fields, may help to constrain the lithospheric thickness and its potential variations in time and space. This report describes progress made during the five year award under a Presidential Early Career Award for Scientists and Engineers which allows researchers freedom to explore new areas of research.
Stofan, Ellen R.↗
Variations in lithospheric thickness on Venus
Recent analyses of Magellan data have indicated many regions exhibiting topograhic flexure. On Venus, flexure is associated predominantly with coronae and the chasmata with Aphrodite Terra. Modeling of these flexural signatures allows the elastic and mechanical thickness of the lithosphere to be estimated. In areas where the lithosphere is flexed beyond its elastic limit the saturation moment provides information on the strength of the lithosphere. Modeling of 12 flexural features on Venus has indicated lithospheric thicknesses comparable with terrestrial values. This has important implications for the venusian heat budget. Flexure of a thin elastic plate due simultaneously to a line load on a continuous plate and a bending moment applied to the end of a broken plate is considered. The mean radius and regional topographic gradient are also included in the model. Features with a large radius of curvature were selected so that a two-dimensional approximation could be used. Comparisons with an axisymmetric model were made for some features to check the validity of the two-dimensional assumption. The best-fit elastic thickness was found for each profile crossing a given flexural feature. In addition, the surface stress and bending moment at the first zero crossing of each profile were also calculated. Flexural amplitudes and elastic thicknesses obtained for 12 features vary significantly. Three examples of the model fitting procedures are discussed.
Johnson, C. L.↗
Arcuate and circular structures in the Tharsis region: Evidence of coronae on Mars
Arcuate and circular structures are evident in the Tharsis region of Mars. They involve concentric graben and fracture systems and are often associated with volcanic centers. The most prominent example is Alba Patera, a low relief volcanotectonic center. It is surrounded by a graben system comprised of the Alba and Tantalus Fossae and part of the Ceranius Fossae system that are thought to have formed during the Early Amazonian. The graben concentric to Alba Patera form an annulus that is 600 km in diameter. The similarity between Alba Patera and coronae on Venus was observed prior to the Magellan mission. Magellan imagery of Venusian coronae has revealed a number of striking similarities between these structures, Alba Patera, and the other circular structures on Mars. Coronae on Venus are circular to ovoidal volcanotectonic features that range in diameter from 60 to over 1000 km. Concentric graben form partial to complete tectonic annuli. More regionally extensive graben systems are deflected toward, and in many cases merge with, the concentric graben. Volcanic flows and domes dominate the surface enclosed within the concentric graben. However, distinctive differences exist between coronae on Venus and the structures on Mars. Circular structures on Mars lack radial graben crosscut by concentric graben. There is also no evidence of the complex topography associated with coronae on Venus. The differences between coronae on Venus and the suspected coronae on Mars may be largely due to the difference in the thickness of the elastic lithosphere on the two planets. The topographic expression of the interaction between the diapir and the lithosphere would be expected to be greatly subdued on Mars because of the large difference in lithospheric thickness. The lack of circular structures with diameters below 200 km suggests a lower limit to the size that coronae could form on Mars.
Watters, T. R.↗
Bounds on Lithospheric Thickness on Venus from Magellan Gravity and Topography Data
The primary objective of the work executed under NAGW-4784 is to provide constraints on the thermal and tectonic evolution of Venus. Establishing thermal and tectonic evolution models requires not only geological, but geophysical constraints, in particular the nature of temporal and spatial variations in crustal and lithospheric thickness. The major topics of study completed under NAGW-4784 (described more fully below) are: (1) detailed analyses of the resolution of Magellan Line-Of-Site (LOS) Doppler data to establish the minimum resolvable wavelength in the gravity data; (2) calculations of the global strain field in the venusian lithosphere and comparisons with global strain patterns from geological mapping; (3) study of the geological history of coronae at E. Eistla Regio; (4) estimation of crustal and lithospheric thickness by modeling of topography at asymmetric and symmetric rift-like chasmata; (5) preliminary investigations of spatial versus temporal variations in lithospheric thickness. Both the PI and Co-I have presented papers based on these topics at national and international meetings (American Geophysical Union Meetings, Lunar and Planetary Science Conferences, Chapman Conference on the Geodynamics of Venus).
Johnson, Catherine L.↗
An Admittance Survey of Large Volcanoes on Venus: Implications for Volcano Growth
Estimates of the thickness of the venusian crust and elastic lithosphere are important in determining the rheological and thermal properties of Venus. These estimates offer insights into what conditions are needed for certain features, such as large volcanoes and coronae, to form. Lithospheric properties for much of the large volcano population on Venus are not well known. Previous studies of elastic thickness (Te) have concentrated on individual or small groups of edifices, or have used volcano models and fixed values of Te to match with observations of volcano morphologies. In addition, previous studies use different methods to estimate lithospheric parameters meaning it is difficult to compare their results. Following recent global studies of the admittance signatures exhibited by the venusian corona population, we performed a similar survey into large volcanoes in an effort to determine the range of lithospheric parameters shown by these features. This survey of the entire large volcano population used the same method throughout so that all estimates could be directly compared. By analysing a large number of edifices and comparing our results to observations of their morphology and models of volcano formation, we can help determine the controlling parameters that govern volcano growth on Venus.
Brian, A. W.↗
The Role of Chemically Depleted Mantle in the Formation of Coronae on Venus
Without extensive plate subduction to act as a recycling mechanism, a thick layer of buoyant, depleted mantle material may accumulate beneath the thermal lithosphere on Venus due to the pressure-release melting that occurs during crustal formation. Such a layer could be the key factor that allows coronae to form on Venus but not on Earth. Coronae are roughly circular volcano-tectonic features that are interpreted as a manifestation of small-scale upwelling and are unique to Venus. The topographic expression of coronae is highly variable, ranging from domes to plateaus, with or without moats or single or multiple outer rises. In addition to why coronae from on Venus but not on Earth, two outstanding questions in the study of coronae are how the full range of topographic profiles are produced and the relationship between topography and the annulus of fractures that characterize coronae.
Coronae↗
Visoelastic relaxation of Venusian coronae and mountain belts: Constraints on global heat flow and tectonism
Venus differs from Earth in that water is essentially absent and its surface temperatures are about 470 K higher. The competing effects of high surface temperature and dry lithologies on the long-term history of surface topography have been studied using the finite-element method. The relaxation history of surface topographic features, such as coronae and mountain belts, is a function of thermal gradient, crustal thickness and lithology, regional stresses, and basal tractions applied to the lithosphere. In this study, we have examined the relative effects of these factors over a period of 500 Ma (presumed to be the mean age of the venusian surface).
Duncan, I.↗
Flexural analysis of uplifted rift flanks on Venus
Knowledge of the thermal structure of a planet is vital to a thorough understanding of its general scheme of tectonics. Since no direct measurements of heat flow or thermal gradient are available for Venus, most estimates have been derived from theoretical considerations or by analog with the Earth. The flexural response of the lithosphere to applied loads is sensitive to regional thermal structure. Under the assumption that the yield strength as a function of depth can be specified, the temperature gradient can be inferred from the effective elastic plate thickness. Previous estimates of the effective elastic plate thickness of Venus range from 11-18 km for the foredeep north of Uorsar Rupes to 30-60 km for the annular troughs around several coronae. Thermal gradients inferred for these regions are 14-23 K km(exp -1) and 4-9 K km(exp -1) respectively. In this study, we apply the same techniques to investigate the uplifted flanks of an extensional rift. Hypotheses for the origin of uplifted rift flanks on Earth include lateral transport of heat from the center of the rift, vertical transport of heat by small-scale convection, differential thinning of the lithosphere, dynamical uplift, and isostatic response to mechanical uploading of the lithosphere. The 1st hypothesis is considered the dominant contributor to terrestrial rift flanks lacking evidence for volcanic activity, particularly for rift structures that are no longer active. In this study, we model the uplifted flanks of a venusian rift as the flexural response to a vertical end load.
Evans, Susan A.↗
Large Volcanic Rises on Venus
Large volcanic rises on Venus have been interpreted as hotspots, or the surface manifestation of mantle upwelling, on the basis of their broad topographic rises, abundant volcanism, and large positive gravity anomalies. Hotspots offer an important opportunity to study the behavior of the lithosphere in response to mantle forces. In addition to the four previously known hotspots, Atla, Bell, Beta, and western Eistla Regiones, five new probable hotspots, Dione, central Eistla, eastern Eistla, Imdr, and Themis, have been identified in the Magellan radar, gravity and topography data. These nine regions exhibit a wider range of volcano-tectonic characteristics than previously recognized for venusian hotspots, and have been classified as rift-dominated (Atla, Beta), coronae-dominated (central and eastern Eistla, Themis), or volcano-dominated (Bell, Dione, western Eistla, Imdr). The apparent depths of compensation for these regions ranges from 65 to 260 km. New estimates of the elastic thickness, using the 90 deg and order spherical harmonic field, are 15-40 km at Bell Regio, and 25 km at western Eistla Regio. Phillips et al. find a value of 30 km at Atla Regio. Numerous models of lithospheric and mantle behavior have been proposed to interpret the gravity and topography signature of the hotspots, with most studies focusing on Atla or Beta Regiones. Convective models with Earth-like parameters result in estimates of the thickness of the thermal lithosphere of approximately 100 km. Models of stagnant lid convection or thermal thinning infer the thickness of the thermal lithosphere to be 300 km or more. Without additional constraints, any of the model fits are equally valid. The thinner thermal lithosphere estimates are most consistent with the volcanic and tectonic characteristics of the hotspots. Estimates of the thermal gradient based on estimates of the elastic thickness also support a relatively thin lithosphere (Phillips et al.). The advantage of larger estimates of the thermal lithospheric thickness is that they provide an explanation for the apparently modest levels of geologic activity on Venus over the last half billion years.
Smrekar, Suzanne E.↗
Admittance Survey of Type 1 Coronae on Venus: Implications for Elastic Thickness
Coronae are volcano-tectonic features on Venus which range from 60km to 2600km and are defined by their nearly circular patterns of fractures. Type 1 (regular) coronae are classified as having >50% complete fracture annuli. Previous work has examined the factors controlling the morphology, size, and fracture pattern of coronae, using lithospheric properties, loading signature and geologic characteristics. However, these studies have been limited to Type 2 (topographic) coronae (e.g. coronaes with <50% fracture annuli), and the factors controlling the formation of Type 1 coronae remain poorly understood. In this study, we apply the methodology of to survey the admittance signature for Type 1 coronae to determine the controlling parameters which govern Type 1 coronae formation.
Hoogenboom, T.↗