Search NASA⌕ Search

SEARCH · Search NASA

Results for “Localization Techniques”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1995

Study of localized corrosion in aluminum alloys by the scanning reference electrode technique

Localized corrosion in 2219-T87 aluminum (Al) alloy, 2195 aluminum-lithium (Al-Li) alloy, and welded 2195 Al-Li alloy (4043 filler) have been investigated using the relatively new scanning reference electrode technique (SRET). Anodic sites are more frequent and of greater strength in the 2195 Al-Li alloy than in the 2219-T87 Al alloy, indicating a greater tendency toward pitting for the latter. However, the overall corrosion rates are about the same for these two alloys, as determined using the polarization resistance technique. In the welded 2195 Al-Li alloy, the weld bean is entirely cathodic, with rather strongly anodic heat affected zones (HAZ) bordering both sides, indicating a high probability of corrosion in the HAZ parallel to the weld bead.

Danford, M. D.↗
NASA NTRS1995

Studies of localized corrosion in welded aluminum alloys by the scanning reference electrode technique

Localized corrosion in welded samples of 2219-T87 Al alloy (2319 filler), 2090 Al-Li alloy (4043 and 2319 fillers), and 2195 Al-Li alloy (4043 and 2319 fillers) has been investigated using the relatively new scanning reference electrode technique. The weld beads are cathodic in all cases, leading to reduced anode/cathode ratios. A reduction in anode/cathode ratio leads to an increase in the corrosion rates of the welded metals, in agreement with results obtained in previous electrochemical and stress corrosion studies involving the overall corrosion rates of welded samples. The cathodic weld beads are bordered on both sides by strong anodic regions, with high propensity for corrosion.

Danford, M. D.↗
NASA NTRS1991

Thunderstorm monitoring and lightning warning, operational applications of the Safir system

During the past years a new range of studies have been opened by the application of electromagnetic localization techniques to the field of thunderstorm remote sensing. VHF localization techniques were used in particular for the analysis of lightning discharges and gave access to time resolved 3-D images of lightning discharges within thunderclouds. Detection and localization techniques developed have been applied to the design of the SAFIR system. This development's main objective was the design of an operational system capable of assessing and warning in real time for lightning hazards and potential thunderstorm hazards. The SAFIR system main detection technique is the long range interferometric localization of thunderstorm electromagnetic activity; the system performs the localization of intracloud and cloud to ground lightning discharges and the analysis of the characteristics of the activity.

Richard, Philippe↗
NASA NTRS1987

Analysis of implicit local linearization techniques for upwind and TVD algorithms

An attempt is made to investigate local time linearization techniques for implicit flux-difference splitting and flux-vector splitting schemes in the simplest settings (i.e., first-order spatial schemes and one-dimensional Euler flows). It is noted that first-order spatial schemes provide the simplest examples of schemes which are collective extensions of scalar TVD schemes. Simple analytical results concerning the local linearizations are highlighted and subsequently verified using a numerical fixed-point analysis on selected problems. It is noted that while primary emphasis is on asymptotic behavior, many of the results have implications for time-accurate calculations as well.

Barth, Timothy J.↗
NASA NTRS1988

A preliminary investigation of communication techniques for local and remote access to image databases

A software technique which allows users to examine images remotely while minimizing transmission time, is discussed. The technique provides a browsing capability, making it possible to roam over larger images, to zoom to various resolution levels, and to specify subregions of interest in the image to display at full resolution. The software permits analysts to remotely submit images for processing and to review the processing result. The capabilities of the technique under varying conditions and the speed at which imagery can be displayed over direct connect serial lines are discussed and examples of the imagery at various levels of resolution are presented.

Ma, Mathias↗
NASA NTRS1988

Mapping electrodynamic features of the high-latitude ionosphere from localized observations - Technique

This paper describes a novel procedure for mapping high-latitude electric fields and currents and their associated magnetic variations, using sets of localized observational data derived from different types of measurements. The technique provides a formalism for incorporating simultaneously such different classes of data as electric fields from radars and satellites, electric currents from radars, and magnetic perturbations at the ground and at satellite heights; the technique also uses available statistical information on the averages and variances of electrodynamic fields. The technique provides a more rigorous way of quantitatively estimating high-latitude electric field and current patterns than other methods and has a capability to quantify the errors in the mapped fields, based on the distribution of available data, their errors, and the statistical variances of the fields. The technique is illustrated by an application to a substorm which was analyzed by Kamide et al. (1982) by an earlier technique.

Richmond, A. D.↗
NASA NTRSDate not supplied

Autonomous Lunar PNT Simulator (ALPS)

In this paper we present a simulation tool that has been used to develop an architecture for a low-cost Position, Navigation and Time (PNT) system to provide PNT services on and around the Moon using non-dedicated low-cost orbital and ground assets. The simulation tool has been developed to be flexible and is capable of modeling and analyzing the many different capabilities and configurations that the non-dedicated assets could support. The tool models the creation of an ad hoc swarm, the localization of this swarm and the subsequent provision of PNT services from this swarm. We present results from several studies of select configurations chosen to reflect existing and future real-world needs and capabilities. Over the next few decades there is expected to be a substantial increase in Lunar missions supporting and inspired by NASA’s Artemis Program. It is expected that a large fraction of these missions will be low cost, utilizing rideshares and CubeSats, just as has seen in Earth orbit over the past decade. Many of these missions will need navigation capabilities but may be unable to support the large power, mass and weight that a weak GNSS or DSN based navigation solution would entail. As Lunar PNT service demand is not likely to be needed over the entire lunar surface 24/7, the creation of a dedicated Lunar GNSS constellation cannot be justified. Hence, our proposed architecture envisions utilizing existing Lunar science and exploration assets to create ad hoc and on demand Lunar PNT swarms capable of providing PNT services to low cost missions. The simulation reflects the two distinct parts of the architecture: the creation of a Lunar PNT swarm using non-dedicated existing assets, and the quantitative modeling of the quality of the PNT services that this swarm provides. To support the former, the simulation supports various swarm localization techniques, including centralized and distributed EKFs both of which support pluggable dynamics models. In modeling the PNT service performance the simulation adopts standard techniques from the GNSS community, including providing degree of precision (DOP) estimates for theoretical end users. Crucially, all asset capabilities, including clock accuracy, independent location self-knowledge and timing measurement precision can be set independently for each asset, reflecting the key concept of utilizing non-dedicated assets. The simulation is predominantly implemented in MATLAB, with GMAT being used for the propagation of orbital assets. The paper will present results from the simulation reflecting the tool’s flexibility and focusing on scenarios that match real-world proposed missions, including scenarios designed to provide PNT support to lunar surface missions similar to NASA Ames' forthcoming VIPER mission. The performance of centralized and decentralized swarm configuration and localization techniques will be compared. Finally, performance of the PNT service provided by an autonomous Lunar PNT swarm will be compared to existing radiometric and weak GNSS methods.

Kelley Elizabeth Hashemi↗
NASA NTRS1964

Improved technique for localizing electropolishing features novel nozzles

Impingement electropolishing is accomplished by use of an electrolyte film, which is evenly distributed by an insulated nozzle designed to match the contour of the workpiece to be treated. The workpiece is connected to the positive terminal of a generator and the nozzle to the negative terminal.

Source record↗
NASA NTRS1999

Deblurring

In most instances, traditional EEG methodology provides insufficient spatial detail to identify relationships between brain electrical events and structures and functions visualized by magnetic resonance imaging or positron emission tomography. This article describes a method called Deblurring for increasing the spatial detail of the EEG and for fusing neurophysiologic and neuroanatomic data. Deblurring estimates potentials near the outer convexity of the cortex using a realistic finite element model of the structure of a subject's head determined from their magnetic resonance images. Deblurring is not a source localization technique and thus makes no assumptions about the number or type of generator sources. The validity of Deblurring has been initially tested by comparing deblurred data with potentials measured with subdural grid recordings. Results suggest that deblurred topographic maps, registered with a subject's magnetic resonance imaging and rendered in three dimensions, provide better spatial detail than has heretofore been obtained with scalp EEG recordings. Example results are presented from research studies of somatosensory stimulation, movement, language, attention and working memory. Deblurred ictal EEG data are also presented, indicating that this technique may have future clinical application as an aid to seizure localization and surgical planning.

Non-NASA Center↗
NASA NTRS1999

Global-Local Analysis and Optimization of a Composite Civil Tilt-Rotor Wing

This report gives highlights of an investigation on the design and optimization of a thin composite wing box structure for a civil tilt-rotor aircraft. Two different concepts are considered for the cantilever wing: (a) a thin monolithic skin design, and (b) a thick sandwich skin design. Each concept is examined with three different skin ply patterns based on various combinations of 0, +/-45, and 90 degree plies. The global-local technique is used in the analysis and optimization of the six design models. The global analysis is based on a finite element model of the wing-pylon configuration while the local analysis uses a uniformly supported plate representing a wing panel. Design allowables include those on vibration frequencies, panel buckling, and material strength. The design optimization problem is formulated as one of minimizing the structural weight subject to strength, stiffness, and d,vnamic constraints. Six different loading conditions based on three different flight modes are considered in the design optimization. The results of this investigation reveal that of all the loading conditions the one corresponding to the rolling pull-out in the airplane mode is the most stringent. Also the frequency constraints are found to drive the skin thickness limits, rendering the buckling constraints inactive. The optimum skin ply pattern for the monolithic skin concept is found to be (((0/+/-45/90/(0/90)(sub 2))(sub s))(sub s), while for the sandwich skin concept the optimal ply pattern is found to be ((0/+/-45/90)(sub 2s))(sub s).

Rais-Rohani, Masound↗
NASA NTRS1999

A Method for Calculating Strain Energy Release Rates in Preliminary Design of Composite Skin/Stringer Debonding Under Multi-Axial Loading

Three simple procedures were developed to determine strain energy release rates, G, in composite skin/stringer specimens for various combinations of unaxial and biaxial (in-plane/out-of-plane) loading conditions. These procedures may be used for parametric design studies in such a way that only a few finite element computations will be necessary for a study of many load combinations. The results were compared with mixed mode strain energy release rates calculated directly from nonlinear two-dimensional plane-strain finite element analyses using the virtual crack closure technique. The first procedure involved solving three unknown parameters needed to determine the energy release rates. Good agreement was obtained when the external loads were used in the expression derived. This superposition technique was only applicable if the structure exhibits a linear load/deflection behavior. Consequently, a second technique was derived which was applicable in the case of nonlinear load/deformation behavior. The technique involved calculating six unknown parameters from a set of six simultaneous linear equations with data from six nonlinear analyses to determine the energy release rates. This procedure was not time efficient, and hence, less appealing. A third procedure was developed to calculate mixed mode energy release rates as a function of delamination lengths. This procedure required only one nonlinear finite element analysis of the specimen with a single delamination length to obtain a reference solution for the energy release rates and the scale factors. The delamination was extended in three separate linear models of the local area in the vicinity of the delamination subjected to unit loads to obtain the distribution of G with delamination lengths. This set of sub-problems was Although additional modeling effort is required to create the sub- models, this local technique is efficient for parametric studies.

Krueger, Ronald↗
NASA NTRS1989

Investigation of the flow in the diffuser section of the NASA Lewis icing research tunnel

The flow in the diffuser section of the Icing Research Wind Tunnel at NASA Lewis Research Center is investigated using both tunnel calibration measurements and numerical simulation techniques. Local pressure and temperature measurements are made to establish velocity and temperature profiles in the diffuser of the tunnel. These profiles are compared with similar measurements made prior to renovating the equipment which generates the tunnel's icing cloud. This comparison indicates the manner in which this change affected the flow. The measured data were also compared with a numerical simulation of the flow to help understand how such changes may favorably alter the tunnel flow.

Addy, Harold E., Jr.↗
NASA NTRS1989

Investigation of the flow in the diffuser section of the NASA Lewis Icing Research Tunnel

The flow in the diffuser section of the Icing Research Wind Tunnel at NASA Lewis Research Center is investigated using both tunnel calibration measurements and numerical simulation techniques. Local pressure and temperature measurements are made to establish velocity and temperature profiles in the diffuser of the tunnel. These profiles are compared with similar measurements made prior to renovating the equipment which generates the tunnel's icing cloud. This comparison indicates the manner in which this change affected the flow. The measured data were also compared with a numerical simulation of the flow to help understand how such changes may favorably alter the tunnel flow.

Addy, Harold E., Jr.↗
NASA NTRS1990

Tele-Autonomous control involving contact

Object localization and its application in tele-autonomous systems are studied. Two object localization algorithms are presented together with the methods of extracting several important types of object features. The first algorithm is based on line-segment to line-segment matching. Line range sensors are used to extract line-segment features from an object. The extracted features are matched to corresponding model features to compute the location of the object. The inputs of the second algorithm are not limited only to the line features. Featured points (point to point matching) and featured unit direction vectors (vector to vector matching) can also be used as the inputs of the algorithm, and there is no upper limit on the number of the features inputed. The algorithm will allow the use of redundant features to find a better solution. The algorithm uses dual number quaternions to represent the position and orientation of an object and uses the least squares optimization method to find an optimal solution for the object's location. The advantage of using this representation is that the method solves for the location estimation by minimizing a single cost function associated with the sum of the orientation and position errors and thus has a better performance on the estimation, both in accuracy and speed, than that of other similar algorithms. The difficulties when the operator is controlling a remote robot to perform manipulation tasks are also discussed. The main problems facing the operator are time delays on the signal transmission and the uncertainties of the remote environment. How object localization techniques can be used together with other techniques such as predictor display and time desynchronization to help to overcome these difficulties are then discussed.

Shao, Lejun↗
NASA NTRSDate not supplied

Geodetic Reference Instrument Transponder for Small Satellites (Gritss)

The accuracy of the Terrestrial Reference Frame is limited by systematic errors in tying the contributions from the different geodetic techniques. Local survey uncertainties are limited due to the inaccessibility of the instrument reference points. NASA is implementing a technology demonstration mission called Geodetic Reference Instrument Transponder for Small Satellites(GRITSS) that uses a small satellite as a space-based ref-refence point for tying together collocated geodetic stations. The technology being demonstrated uses a novel idea of upconverting the Global Positioning System (GPS) signals received at the satellite and transponding them to a VLBI Global Observing System (VGOS) antenna ground station. This approach does not require the satellite to be in view of more than one VLBI station at a time, allowing the use of Low Earth Orbits and an inexpensive CubeSat. The demonstration will initially involve only the NASA VGOS stations in Maryland, Hawaii, and Texas, but may be expanded later in the mission to include other international VGOS stations. This presentation will provide an overview of the GRITSS mission and the measurement concept.

S M Merkowitz↗
NASA NTRSDate not supplied

Geodetic Reference Instrument Transponder for Small Satellites (GRITTS)

The accuracy of the Terrestrial Reference Frame is limited by systematic errors in tying the contributions from the different geodetic techniques. Local survey uncertainties are limited due to the inaccessibility of the instrument reference points. NASA is implementing a technology demonstration mission called Geodetic Reference Instrument Transponder for Small Satellites(GRITSS) that uses a small satellite as a space-based ref-refence point for tying together collocated geodetic stations. The technology being demonstrated uses a novel idea of upconverting the Global Positioning System (GPS) signals received at the satellite and transponding them to a VLBI Global Observing System (VGOS) antenna ground station. This approach does not require the satellite to be in view of more than one VLBI station at a time, allowing the use of Low Earth Orbits and an inexpensive CubeSat. The demonstration will initially involve only the NASA VGOS stations in Maryland, Hawaii, and Texas, but may be expanded later in the mission to include other international VGOS stations. This presentation will provide an overview of the GRITSS mission and the measurement concept.

S. M. Merkowitz↗