Search NASA⌕ Search

SEARCH · Search NASA

Results for “Localized surface plasmon resonances”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Reflective Fiber Temperature Probe Based on Localized Surface Plasmon Resonance towards Low-Cost and Wireless Interrogation

Reflection fiber temperature sensors functionalized with plasmonic nanocomposite material using intensity-based modulation are demonstrated for the first time. Characteristic temperature optical response of the reflective fiber sensor is experimentally tested using Au-incorporated nanocomposite thin films deposited on the fiber tip, and theoretically validated using a thin-film-optic-based optical waveguide model. By optimizing the Au concentration in a dielectric matrix, Au nanoparticles (NP) exhibit a localized surface plasmon resonance (LSPR) absorption band in a visible wavelength that shows a temperature sensitivity ~0.025%/°C as a result of electron–electron and electron–phonon scattering of Au NP and the surrounding matrix. Detailed optical material properties of the on-fiber sensor film are characterized using scanning electron microscopy (SEM) and focused-ion beam (FIB)-assisted transmission electron microscopy (TEM). Airy’s expression of transmission and reflection using complex optical constants of layered media is used to model the reflective optical waveguide. A low-cost wireless interrogator based on a photodiode transimpedance-amplifier (TIA) circuit with a low-pass filter is designed to integrate with the sensor. The converted analog voltage is wirelessly transmitted via 2.4 GHz Serial Peripheral Interface (SPI) protocols. Feasibility is demonstrated for portable, remotely interrogated next-generation fiber optic temperature sensors with future capability for monitoring additional parameters of interest.

47 OTHER INSTRUMENTATION↗
DOE OSTI2023

MoS 2 Nanoplatelets on Hybrid Core-Shell (HyCoS) AuPd NPs for Hybrid SERS Platform for Detection of R6G

In this work, a novel hybrid SERS platform incorporating hybrid core-shell (HyCoS) AuPd nanoparticles (NPs) and MoS 2 nanoplatelets has been successfully demonstrated for strong surface-enhanced Raman spectroscopy (SERS) enhancement of Rhodamine 6G (R6G). A significantly improved SERS signal of R6G is observed on the hybrid SERS platform by adapting both electromagnetic mechanism (EM) and chemical mechanism (CM) in a single platform. The EM enhancement originates from the unique plasmonic HyCoS AuPd NP template fabricated by the modified droplet epitaxy, which exhibits strong plasmon excitation of hotspots at the nanogaps of metallic NPs and abundant generation of electric fields by localized surface plasmon resonance (LSPR). Superior LSPR results from the coupling of distinctive AuPd core-shell NP and high-density background Au NPs. The CM enhancement is associated with the charge transfer from the MoS 2 nanoplatelets to the R6G. The direct contact via mixing approach with optimal mixing ratio can effectively facilitate the charges transfer to the HOMO and LUMO of R6G, leading to the orders of Raman signal amplification. The enhancement factor (EF) for the proposed hybrid platform reaches ~10 10 for R6G on the hybrid SERS platform.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Plasmonic hybrid core-shell (HyCoS) AgPt NP template hybridized with GQDs for SERS enhancement of 4-MBA and BT

Surface-enhanced Raman spectroscopy (SERS) is an attractive vibrational spectroscopic technique that can enable a non-destructive and ultra-sensitive detection down to the single-molecule level. Herein, a novel hybrid SERS platform is developed based on hybrid core-shell (HyCoS) AgPt nanoparticles (NPs) and graphene quantum dots (GQDs) for the enhancement of Raman vibration of 4-mercaptobenzoic acid (4-MBA) and benzenethiol (BT). The unique design of HyCoS AgPt NPs induces strong electromagnetic mechanism (EM) enhancement through the amplification of electromagnetic fields by the excitation of high-density surface plasmons and hot spots. Superior localized surface plasmon resonance (LSPR) is generated by the AgPt core-shell and background Ag NP coupling, which is systematically investigated by the optical properties and FDTD simulations. The background Ag NPs can further increase the coverage of metallic NPs, leading to higher-density hot spots and enhanced SERS response. At the same time, GQDs can provide plentiful accessible edges for the charge transfer to the HOMO and LUMO of 4-MBA and BT based on the chemical mechanism (CM) enhancement. The mixing approach of GQDs and target molecules on the HyCoS AgPt NPs can significantly amplify the Raman signals via the strong adsorption of probe molecules by the π–π interaction. The enhancement factors of proposed SERS platform can reach ~10 7 and ~10 5 for the 4-MBA and BT respectively.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Hybrid Plasmonic Coupled‐Mode Metasurface Design for Shot‐Noise Limited Ppb‐Level Hydrogen Detection

Plasmonic hydrogen sensors have enabled hydrogen detection below parts-per-million (ppm) range by boosting the sensitivity using localized surface plasmonic resonant (LSPR) structures. However, the intrinsic optical losses of Palladium (Pd), the primary plasmonic metal used for hydrogen detection, result in a low quality (Q) factor LSPR, which fundamentally hinders further improvement. In this work, a hybrid plasmonic metasurface is proposed that couples Pd-based LSPR structure with an Au film supporting surface plasmon polariton mode (Au-SPP). The coupled near-perfect absorber resonance yields a spectrally narrow, high Q response that retains strong sensitivity to hydrogen while improving resonance localization. Numerical analysis shows that, under shot-noise-limited conditions, the limit of detection (LoD) can be improved by over threefold compared to the state-of-the-art designs. Furthermore, this hybrid plasmonic coupled-mode metasurface thus presents a promising pathway to achieve parts-per-billion-level (ppb-level) hydrogen detection with enhanced spectral precision and robustness.

coupled modes↗
DOE OSTI2025

Formation and optical properties of indium nanoparticle arrays for deep-UV plasmonics

We utilize a combined computational-experimental approach to examine the influence of indium nanoparticle (NP) array distributions on deep-ultraviolet (UV) plasmon resonances. For photon energies < 5.7 eV, analysis of ellipsometric spectra reveals an increase in silicon reflectance induced by indium NP arrays on silicon. For various energies in the range 5.7–7.0 eV, a decrease in reflectance is induced by the NP arrays. Similar trends in reflectance are predicted from finite-difference time-domain (FDTD) simulations using NP size distributions extracted from atomic-force micrographs as input. In addition, in the energy range of 7.4–9.2 eV, the FDTD simulations reveal reflectance minima, characteristic of localized surface plasmon resonances. Here, electron energy-loss spectroscopy collected from individual indium NPs reveals the presence of LSPR at ≈ 8 eV, further supporting the promise of indium NP arrays on silicon for deep-UV plasmonics.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Unveiling Spatial and Temporal Dynamics of Plasmon-Enhanced Localized Fields in Metallic Nanoframes through Ultrafast Electron Microscopy

Plasmonic nanomaterials, particularly noble metal nanoframes (NFs), are important for applications such as catalysis, biosensing, and energy harvesting due to their ability to enhance localized electric fields and atomic efficiency via localized surface plasmon resonance (LSPR). Yet the fundamental structure-function relationships and plasmonic dynamics of the NFS are difficult to study experimentally and thus far rely predominately on computational methodologies, limiting their utilization. This study leverages the capabilities of ultrafast electron microscopy (UEM), specifically photon-induced near-field electron microscopy (PINEM), to probe the light-matter interactions within plasmonic NF structures. Here, the effects of shape, size, and plasmonic coupling of Pt@Au core-shell NFs on spatial and temporal characteristics of plasmon-enhanced localized electric fields are explored. Importantly, time-resolved PINEM analysis reveals that the plasmonic fields around hexagonal NF prisms exhibit a spatially dependent excitation and decay rate, indicating a nuanced interplay between the spatial geometry of the NF and the temporal evolution of the localized electric field. These results and observations uncover nanophotonic energy transfer dynamics in NFs and highlight their potential for applications in biosensing and photocatalysis.

Plasmonics↗
DOE OSTI2023

Photostability of blue phosphorescent films on plasmonic surfaces

Organometallic phosphors are an important class of emissive materials used in high-efficiency organic light-emitting devices. However, problems of low photostability arise for blue-emitting phosphors due to chemical and environmental degradation and triplet quenching processes. Various approaches have been developed to improve the photostability of such phosphors, including the design of new organometallic molecules and control of host-dopant composition in thin films. Here, we demonstrate a different approach for improving the photostability of blue organometallic phosphors that uses localized surface plasmon resonances to increase the triplet recombination rate. The increased recombination rate improves the photostability of the phosphor due to the reduction in triplet quenching pathways. We show that the lifetime of phosphorescence is decreased significantly by nanoparticle-based plasmonic surfaces, which improves the photostability of the blue organometallic phosphor by up to a factor of 3.6. Other plasmonic surfaces are also tested and exhibit less significant photostability improvements due to a reduced spectral overlap of the plasmonic modes with the emitter and lower mode confinement. The use of plasmonic surfaces to improve phosphor photostability at blue wavelengths is distinct from other approaches because it involves modification to the local electromagnetic environment of the phosphor rather than modifications to the phosphor molecular structure or the emitting material composition.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Plasmonic hybrid core-shell (HyCoS) AgPt NP template hybridized with GQDs for SERS enhancement of 4-MBA and BT

Surface-enhanced Raman spectroscopy (SERS) is an attractive vibrational spectroscopic technique that can enable a non-destructive and ultra-sensitive detection down to the single-molecule level. Herein, a novel hybrid SERS platform is developed based on hybrid core-shell (HyCoS) AgPt nanoparticles (NPs) and graphene quantum dots (GQDs) for the enhancement of Raman vibration of 4-mercaptobenzoic acid (4-MBA) and benzenethiol (BT). The unique design of HyCoS AgPt NPs induces strong electromagnetic mechanism (EM) enhancement through the amplification of electromagnetic fields by the excitation of high-density surface plasmons and hot spots. Superior localized surface plasmon resonance (LSPR) is generated by the AgPt core-shell and background Ag NP coupling, which is systematically investigated by the optical properties and FDTD simulations. The background Ag NPs can further increase the coverage of metallic NPs, leading to higher-density hot spots and enhanced SERS response. At the same time, GQDs can provide plentiful accessible edges for the charge transfer to the HOMO and LUMO of 4-MBA and BT based on the chemical mechanism (CM) enhancement. The mixing approach of GQDs and target molecules on the HyCoS AgPt NPs can significantly amplify the Raman signals via the strong adsorption of probe molecules by the π – π interaction. The enhancement factors of proposed SERS platform can reach ~107 and ~105 for the 4-MBA and BT respectively.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Precision Loading and Delivery of Molecular Cargo by Size-Controlled Coacervation of Gold Nanoparticles Functionalized with Elastin-like Peptides

Thermoresponsive elastin-like peptides (ELPs) have been extensively investigated in biotechnology and medicine, but little attention has been paid to the process by which coacervation causes ELP-decorated particles to aggregate. Here, using gold nanoparticles (AuNPs) functionalized with a cysteine-terminated 96-repeat of the VPGVG sequence (V96-Cys), we show that the size of the clusters that reversibly form above the ELP transition temperature can be finely controlled in the 250 to 930 nm range by specifying the concentration of free V96-Cys in solution and using AuNPs of different sizes. We further find that the localized surface plasmon resonance peak of the embedded AuNPs progressively red-shifts with cluster size, likely due to an increase in particle–particle contacts. We exploit this fine control over size to homogeneously load precise amounts of the dye Nile Red and the antibiotic Tetracycline into clusters of different hydrodynamic diameters and deliver cargos near-quantitatively by deconstructing the aggregates below the ELP transition temperature. Beyond establishing a key role for free ELPs in the agglomeration of ELP-functionalized particles, our results provide a path for the thermally controlled delivery of precise quantities of molecular cargo. This capability might prove useful in combination photothermal therapies and theranostic applications, and to trigger spatially and temporally uniform responses from biological, electronic, or optical systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Plasmon-Induced Hot-Carrier Excited-State Dynamics in Plasmonic Semiconductor Nanocrystals

The variance of carrier relaxation pathways for WO 3–x plasmonic semiconductor nanocrystals (PSNCs) is monitored by transient absorption spectroscopy following excitation of the localized surface plasmon resonance (LSPR) versus the optical band gap (E g,opt ). Excitation of the LSPR leads to efficient hot carrier population above the Fermi level in WO 3–x via Landau damping, in analogy to noble metal LSPR relaxation mechanisms. Hot carrier depopulation occurs on the femtosecond timescale, observed as the concomitant recovery of an LSPR bleach with the appearance of discrete interband and intraband photoinduced absorption features. Further, by comparison, the direct excitation of E g,opt results in trion recombination at donor–acceptor sites within the WO 3–x NC, consistent with exciton decay dynamics observed for typical wide-band-gap semiconductor NCs. From the analysis of pump power dependency data, a hot-carrier electron–phonon coupling constant of 1.47 × 10 11 J K –1 s –1 cm –3 is extracted. The direct comparison of the decay dynamics following E g,opt versus LSPR excitation confirms that the observed plasmon in trioctylphosphine oxide passivated, spherical WO 3–x is a resonance state in which hot carriers are generated only from excitation on resonance with the LSPR frequency. This study on WO 3–x PSNCs provides a toolset that can be used to evaluate the role of hot carriers following LSPR excitation of n-type, plasmonic transparent conducting oxide NCs, where enhancement of photocatalysis, photovoltaic performance, and optical enhancement has been reported.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Self-Assembly Driven Microlithography via Near-Infrared Light Activation

Current vat photopolymerization (VP) relies on UV or visible light to start the rapid crosslinking of liquid photocurable resins into 3D-printed structures. Here, we develop a self-assembly-driven photopatterning approach to photothermally generate polymeric solids by combining thermoplasmonic nanoparticles and thermoresponsive polymers, in which near-infrared (NIR) light activates thermoplasmonic heating of nanoparticles, triggering the irreversible self-assembly of thermoresponsive polymers into insoluble mesoglobules. A small amount of thermal initiator and crosslinker leads to irreversible self-assembly of polymer nanocomposites. NIR light offers deeper penetration and reduced scattering compared to UV, enabling more uniform curing of thicker or filled materials and expanded process control for composites or opaque systems. Thermoplasmonic heat generation is achieved using surface-modified gold nanorods (AuNRs) with a longitudinal localized surface plasmon resonance peak in the NIR region. Key variables such as polymer composition, molecular weight, physical interactions at the nanoparticle–polymer interface, which can be tuned by surface functionalization, AuNR concentration, and pH can be used to tailor the assembly behavior of these systems, including photothermal effect, flocculation, and cloud point temperature, and the mechanical properties of the final structures. Collectively, these results highlight a platform for photothermally-driven microlithography of polymer solids with diverse, tunable macroscopic properties, enabled by low-energy NIR light-activated self-assembly.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Plasmon-Assisted Electrochemical Epoxidation using Water as an Oxidant

Olefin epoxidation, an important industrial reaction, often uses hazardous oxidants, causing challenges in waste disposal. Here, we demonstrate the use of water as an oxidant by a plasmon-assisted electrochemical strategy. The electrocatalyst is comprised of a hybrid of a water oxidation catalyst, manganese oxide, and plasmonic gold nanoparticles. Visible-light irradiation of the electrocatalyst enhanced the epoxidation of 4-styrenesulfonate 5-fold as compared to dark conditions at the same temperature. From electrochemical analyses conducted under plasmon excitation conditions, complemented by real-time time-dependent density functional tight binding simulations, it is found that the plasmonic boost of the electrochemical styrene epoxidation is due to energetic holes generated by the excitation of localized surface plasmon resonances of gold nanoparticles. These photogenerated holes activate adsorbed water for oxidation and enhance the binding of 4-styrenesulfonate at interfacial sites. Here, this work demonstrates a proof of concept and establishes the mechanistic basis for plasmon-assisted activation of water as an O atom source for electrochemical epoxidations.

Gold↗
DOE OSTI2023

Solvent-induced local environment effect in plasmonic catalysis

Solvents are known to affect the local surface plasmon resonance of metal nanoparticles; however, how solvents can be used to manipulate the interfacial charge and energy transfer in plasmonic catalysis remains to be explored.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Performance analysis of photodetectors based on 2D materials and heterostructures

The unprecedented demand for sophisticated, self-powered, compact, ultrafast, cost-effective, and broadband light sensors for a myriad of applications has spurred a lot of research, precipitating in a slew of studies over the last decade. Apart from the photosensing ability of an active element in the light sensor, the device architecture is crucial in terms of photoinduced charge carrier generation and separation. Since the inception of graphene and the subsequent research growth in the atomically thin 2D materials, researchers have developed and adapted different families of 2D materials and device architectures, including single element 2D, 0D/2D, 2D/2D, 1D/2D stacked structures, and so on. Here this review discusses the recent reports on the light-sensing properties of various 2D materials, their heterostructures, and characteristics applicable to the ultraviolet-near infrared (UV-NIR), short-wave IR (SWIR), mid-wave IR (MWIR), long-wave IR (LWIR), and terahertz (THz) spectral ranges. It highlights the novelty of the burgeoning field, the heightened activity at the boundaries of engineering and materials science, particularly in the generation of charge carriers, their separation, and extraction, and the increased understanding of the underpinning science through modern experimental approaches. Devices based on the simultaneous effects of the pyro-phototronic effect (PPE) and the localized surface plasmon resonance (LSPR) effect, the photothermoelectric effect (PTE)-assisted photodetectors (PDs), waveguide-integrated silicon-2D PDs, metal-2D-metal PDs, and organic material PDs are examined rigorously. Theoretical treatment utilizing various computational approaches to investigate 2D materials and heterostructures for photodetection applications is also briefly discussed. At the end, current challenges and solutions to enhance the figures of merit of photodetectors are proposed.

2D transition metal chalcogenides↗
DOE OSTI2024

Interplay between gain and loss in arrays of nonlinear plasmonic nanoparticles: toward parametric downconversion and amplification

With the help of a theoretical model and finite-difference time-domain (FDTD) simulations based on the hydrodynamic–Maxwell model, we examine the effect of difference-frequency generation (DFG) in an array of L-shaped metal nanoparticles (MNPs) characterized by intrinsic plasmonic nonlinearity. The outcomes of the calculations reveal the spectral interplay between gain and loss in the vicinity of the fundamental frequency of the localized surface plasmon resonances. Subsequently, we identify different array thicknesses and pumping regimes facilitating parametric amplification and spontaneous parametric downconversion. Our results suggest that the parametric amplification regime becomes feasible on a scale of hundreds of nanometers and spontaneous parametric downconversion on the scale of tens of nanometers, opening up new exciting opportunities for developing building blocks of photonic metasurfaces.

Shah, Syed A.↗
DOE OSTI2023

Tunable plasmonic color device and method of making the same

A plasmonic system is disclosed. The system includes at least one polarizer that is configured to provide at least one linearly polarized broadband light beam, an anisotropic plasmonic metasurface (APM) assembly having a plurality of nanoantennae each having a predetermined orientation with respect to a global axis representing encoded digital data, the APM assembly configured to receive the at least one linearly polarized broadband light beam and by applying localized surface plasmon resonance reflect light with selectable wavelengths associated with the predetermined orientations of the nanoantennae, and at least one analyzer that is configured to receive the reflected light with selectable wavelength, wherein the relative angles between each of the at least one analyzers and each of the at least one polarizers are selectable with respect to the global axis, thereby allowing decoding of the digital data.

Kildishev, Alexander V.↗
DOE OSTI2023

Optical Processes behind Plasmonic Applications

Plasmonics is a revolutionary concept in nanophotonics that combines the properties of both photonics and electronics by confining light energy to a nanometer-scale oscillating field of free electrons, known as a surface plasmon. Generation, processing, routing, and amplification of optical signals at the nanoscale hold promise for optical communications, biophotonics, sensing, chemistry, and medical applications. Surface plasmons manifest themselves as confined oscillations, allowing for optical nanoantennas, ultra-compact optical detectors, state-of-the-art sensors, data storage, and energy harvesting designs. Surface plasmons facilitate both resonant characteristics of nanostructures and guiding and controlling light at the nanoscale. Plasmonics and metamaterials enable the advancement of many photonic designs with unparalleled capabilities, including subwavelength waveguides, optical nanoresonators, super- and hyper-lenses, and light concentrators. Alternative plasmonic materials have been developed to be incorporated in the nanostructures for low losses and controlled optical characteristics along with semiconductor-process compatibility. This review describes optical processes behind a range of plasmonic applications. It pays special attention to the topics of field enhancement and collective effects in nanostructures. The advances in these research topics are expected to transform the domain of nanoscale photonics, optical metamaterials, and their various applications.

2D materials↗
DOE OSTI2023

Chapter 14: Surface plasmon resonance enhanced artificial photosynthesis of chemical fuels for energy storage

Nanostructured noble metals such as Au, Ag, and Cu have interesting optical properties because of the oscillation motions of their surface electrons upon strong coupling with light under resonance conditions. This resonant oscillation motion of conduction electrons refers to surface plasmon resonance (SPR) and localized SPR (LSPR) when localized near the surface of a nanoparticle. The extinction spectrum of a solution of plasmonic nanoparticles has tunable wavelength responses from UV to NIR due to strong light scattering and absorption which are highly sensitive to the permittivity of the nanoparticles, their sizes and shapes, and chemical environment. Strong light scattering due to the LSPR of plasmonic nanoparticles creates a strong localized and far-field intensity capable of enhancing light absorption characteristics of a chromophore near a plasmonic surface. Engineering the chromophores’ radiative decay dynamics can be done by 1) increasing its radiative decay rate to increase its photoluminescence intensity and 2) increasing its nonradiative decay rates associated to direct charge transfer to the metal surface. Such interesting photophysical properties of a chromophore can be extended to other light-absorbing materials such as semiconductor thin films and nanostructures. This plasmonic effect on the photophysics of a light-absorbing material can be theoretically and experimentally validated. The phenomenon has also been applied to advanced optoelectronic devices such as organic light-emitting diodes (OLED)1 and organic photovoltaics (OPV).2-4 The local field created by the SPR can provide an intense EM field to enhance photoluminescence emission of an organic chromophore5-8 and Raman scattering of an organic molecule, and single-molecule Raman9-10 can be detected on specially designed LSPR substrate. (Figure 1 on SPR for energy) Recent studies suggest that LSPR can be incorporated in light-harvesting and conversion systems to increase energy conversion in a solar cell and photoelectrochemical cell and chemical transformations of CO2 to chemical fuels.11-12 Plasmonic active metals naturally exhibit catalytic activities for electrochemical fuel conversion that can be enhanced by engineering their structures to form unique catalytic structures such as symmetry-broken Au-Cu Janus nanocrystals.13 These studies are critical to addressing the global challenges of energy14-15 and CO2 emission from nonrenewable sources such as coal, petroleum, and natural gas.16-17 Electrochemical systems comprised of unique photonic structures and functions that enable efficient and affordable energy harvesting/conversion/storage are highly desired for providing safe and environment-friendly energy sources. This chapter reviews our recent work of LSPR enabled photoelectrochemical water splitting and recent advances in LSPR-enabled CO2 reduction and photochemical reactions reported in the literature. Scientific and technical challenges of applying LSPR to enhance these energy conversion and storage systems are discussed at the conclusion of this chapter.

Pan, Shanlin↗