Search NASA⌕ Search

SEARCH · Search NASA

Results for “Lookup table”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

FutureGen 2.0 1008 Simulation Reservoir Lookup Table

Lookup table of pressures and saturations from injection layer of FutureGen 2.0 reservoir model developed using the STOMP simulator. A 20-year injection period with CO2 injection at a rate of 1.1 MMT of CO2 per year is followed by a 50-year post-injection period. The permeability of each of the 31 model layers was varied independently using Latin Hypercube Sampling.

carbon storage↗

SU-F-T-406: Verification of Total Body Irradiation Commissioned MU Lookup Table Accuracy Using Treatment Planning System for Wide Range of Patient Sizes

Purpose: To verify the accuracy of total body irradiation (TBI) measurement commissioning data using the treatment planning system (TPS) for a wide range of patient separations. Methods: Our institution conducts TBI treatments with an 18MV photon beam at 380cm extended SSD using an AP/PA technique. Currently, the monitor units (MU) per field for patient treatments are determined using a lookup table generated from TMR measurements in a water phantom (75 × 41 × 30.5 cm3). The dose prescribed to an umbilicus midline point at spine level is determined based on patient separation, dose/ field and dose rate/MU. One-dimensional heterogeneous dose calculations from Pinnacle TPS were validated with thermoluminescent dosimeters (TLD) placed in an average adult anthropomorphic phantom and also in-vivo on four patients with large separations. Subsequently, twelve patients with various separations (17–47cm) were retrospectively analyzed. Computed tomography (CT) scans were acquired in the left and right decubitus positions from vertex to knee. A treatment plan for each patient was generated. The ratio of the lookup table MU to the heterogeneous TPS MU was compared. Results: TLD Measurements in the anthropomorphic phantom and large TBI patients agreed with Pinnacle calculated dose within 2.8% and 2%, respectively. The heterogeneous calculation compared to the lookup table agreed within 8.1% (ratio range: 1.014–1.081). A trend of reduced accuracy was observed when patient separation increases. Conclusion: The TPS dose calculation accuracy was confirmed by TLD measurements, showing that Pinnacle can model the extended SSD dose without commissioning a special beam model for the extended SSD geometry. The difference between the lookup table and TPS calculation potentially comes from lack of scatter during commissioning when compared to extreme patient sizes. The observed trend suggests the need for development of a correction factor between the lookup table and TPS dose calculations.

60 APPLIED LIFE SCIENCES↗

A Lookup Table Based Low Resource Usage Waveform Data Compression Block in FPGA

aA lookup table based lossless data compression scheme suitable for FPGA implementation, with very low silicon resource usage, is developed. Different algorithms can be implemented by simply changing the contents of the lookup tables in the functional block while keeping the logic circuits unchanged. It exhibits performance comparable to the zip compression software in Linux distributions. The compression block can fit into almost any existing FPGA used in the online data acquisition systems of high energy physics experiments. The decompression process can be performed in either software or in FPGA firmware, allowing users to process compressed data flexibly.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

High speed lookup table approach to radiometric calibration of multispectral image data

A concept for performing radiometric correction of multispectral image data onboard a spacecraft at very high data rates is presented and demonstrated. This concept utilized a lookup table approach, implemented in hardware, to convert the raw sensor data into the desired corrected output data. The digital lookup table memory was interfaced to a microprocessor to allow the data correction function to be completely programmable. Sensor data was processed with this approach at rates equal to the access time of the lookup table memory. This concept offers flexible high speed data processing for a wide range of applications and will benefit from the continuing improvements in performance of digital memories.

Kelly, W. L., IV↗

Unified architecture for quantum lookup tables

Quantum access to arbitrary classical data encoded in unitary black-box oracles underlies interesting data-intensive quantum algorithms, such as machine learning or electronic structure simulation. The feasibility of these applications depends crucially on gate-efficient implementations of these oracles, which are commonly some reversible versions of the Boolean circuit for a classical lookup table. Here, we present a general parametrized architecture for quantum circuits implementing a lookup table that encompasses all prior work in realizing a continuum of optimal trade-offs between qubits, non-Clifford gates, and error resilience, up to logarithmic factors. Our architecture assumes only local 2D connectivity, yet recovers results, with the appropriate parameters, polylogarithmic error scaling. We also identify regimes, such as simultaneous sublinear scaling, in all parameters. These results enable tailoring implementations of the commonly used lookup table primitive to any given quantum device with constrained resources.

quantum circuits↗

A Monte Carlo based lookup table for spectrum analysis of turbid media in the reflectance probe regime

Fibre-optic diffuse reflectance spectroscopy offers a method for characterising phantoms of biotissue with specified optical properties. For a commercial reflectance probe (six source fibres surrounding a central collection fibre with an inter-fibre spacing of 480 μm; R400-7, Ocean Optics, USA) we have constructed a Monte Carlo based lookup table to create a function called getR(μ{sub a}, μ'{sub s}), where μ{sub a} is the absorption coefficient and μ'{sub s} is the reduced scattering coefficient. Experimental measurements of reflectance from homogeneous calibrated phantoms with given optical properties are compared with the predicted reflectance from the lookup table. The deviation between experiment and prediction is on average 12.1%. (laser biophotonics)

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Tool Support for Software Lookup Table Optimization

A number of scientific applications are performance-limited by expressions that repeatedly call costly elementary functions. Lookup table (LUT) optimization accelerates the evaluation of such functions by reusing previously computed results. LUT methods can speed up applications that tolerate an approximation of function results, thereby achieving a high level of fuzzy reuse. One problem with LUT optimization is the difficulty of controlling the tradeoff between performance and accuracy. The current practice of manual LUT optimization adds programming effort by requiring extensive experimentation to make this tradeoff, and such hand tuning can obfuscate algorithms. In this paper we describe a methodology and tool implementation to improve the application of software LUT optimization. Our Mesa tool implements source-to-source transformations for C or C++ code to automate the tedious and error-prone aspects of LUT generation such as domain profiling, error analysis, and code generation. We evaluate Mesa with five scientific applications. Our results show a performance improvement of 3.0× and 6.9× for two molecular biology algorithms, 1.4× for a molecular dynamics program, 2.1× to 2.8× for a neural network application, and 4.6× for a hydrology calculation. We find that Mesa enables LUT optimization with more control over accuracy and less effort than manual approaches.

Wilcox, Chris↗

A microprocessor-based table lookup approach for magnetic bearing linearization

An approach for producing a linear transfer characteristic between force command and force output of a magnetic bearing actuator without flux biasing is presented. The approach is microprocessor based and uses a table lookup to generate drive signals for the magnetic bearing power driver. An experimental test setup used to demonstrate the feasibility of the approach is described, and test results are presented. The test setup contains bearing elements similar to those used in a laboratory model annular momentum control device.

Groom, N. J.↗

Global Aerosol Optical Models and Lookup Tables for the New MODIS Aerosol Retrieval over Land

Since 2000, MODIS has been deriving aerosol properties over land from MODIS observed spectral reflectance, by matching the observed reflectance with that simulated for selected aerosol optical models, aerosol loadings, wavelengths and geometrical conditions (that are contained in a lookup table or 'LUT'). Validation exercises have showed that MODIS tends to under-predict aerosol optical depth (tau) in cases of large tau (tau greater than 1.0), signaling errors in the assumed aerosol optical properties. Using the climatology of almucantur retrievals from the hundreds of global AERONET sunphotometer sites, we found that three spherical-derived models (describing fine-sized dominated aerosol), and one spheroid-derived model (describing coarse-sized dominated aerosol, presumably dust) generally described the range of observed global aerosol properties. The fine dominated models were separated mainly by their single scattering albedo (omega(sub 0)), ranging from non-absorbing aerosol (omega(sub 0) approx. 0.95) in developed urban/industrial regions, to neutrally absorbing aerosol (omega(sub 0) approx.90) in forest fire burning and developing industrial regions, to absorbing aerosol (omega(sub 0) approx. 0.85) in regions of savanna/grassland burning. We determined the dominant model type in each region and season, to create a 1 deg. x 1 deg. grid of assumed aerosol type. We used vector radiative transfer code to create a new LUT, simulating the four aerosol models, in four MODIS channels. Independent AERONET observations of spectral tau agree with the new models, indicating that the new models are suitable for use by the MODIS aerosol retrieval.

Levy, Robert C.↗

Fast Pixel Buffer For Processing With Lookup Tables

Proposed scheme for buffering data on intensities of picture elements (pixels) of image increases rate or processing beyond that attainable when data read, one pixel at time, from main image memory. Scheme applied in design of specialized image-processing circuitry. Intended to optimize performance of processor in which electronic equivalent of address-lookup table used to address those pixels in main image memory required for processing.

Fisher, Timothy E.↗

Implementation of a Very Large Atmospheric Correction Lookup Table for ASTER Using a Relational Database Management System

The Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER)is designed to provide a high resolution map of the Earth in both visible, near-infrared, and thermal spectral regions of the electromagnetic spectrum. The ASTER Science Team has developed several standard data product algorithms, but the most complex aod computing-intensive of these is the estimation of surface radiance and reflectance values, which is done by modeling and correcting for the effects of the atmosphere. The algorithm for atmospheric correction in the visible bands sensed by ASTER calls for use of a very large Atmospheric Correction Look Up Table (ACLUT).

ASTER↗

Lookup tables to compute high energy cosmic ray induced atmospheric ionization and changes in atmospheric chemistry

A variety of events such as gamma-ray bursts and supernovae may expose the Earth to an increased flux of high-energy cosmic rays, with potentially important effects on the biosphere. Existing atmospheric chemistry software does not have the capability of incorporating the effects of substantial cosmic ray flux above 10 GeV. An atmospheric code, the NASA-Goddard Space Flight Center two-dimensional (latitude, altitude) time-dependent atmospheric model (NGSFC), is used to study atmospheric chemistry changes. Using CORSIKA, we have created tables that can be used to compute high energy cosmic ray (10 GeV–1 PeV) induced atmospheric ionization and also, with the use of the NGSFC code, can be used to simulate the resulting atmospheric chemistry changes. We discuss the tables, their uses, weaknesses, and strengths.

79 ASTRONOMY AND ASTROPHYSICS↗

Intersection of parametric surfaces using lookup tables

When primitive structures in the form of parametric surfaces are combined and modified interactively to form complex intersecting surfaces, it becomes important to find the curves of intersection. One must distinguish between finding the shape of the intersection curve, which may only be useful for display purposes, and finding an accurate mathematical representation of the curve, which is important for any meaningful geometric modeling, analysis, design, or manufacturing involving the intersection. The intersection curve between two or more parametric surfaces is important in a variety of computer-aided design and manufacture areas. A few examples are shape design, analysis of groins, design of fillets, and computation of numerically controlled tooling paths. The algorithm presented here provides a mathematical representation of the intersection curve to a specified accuracy. It also provides the database that can simplify operations such as hidden-surface removal, surface rendering, profile identification, and interference or clearance computations.

Hanna, S. L.↗

CRTM Microwave Cloud Scattering Lookup Tables and Radar Simulator

Microwave observations play a very important role in improving the weather forecasts. Although these observations are routinely assimilated into NWP models in clear-sky conditions, assimilation of all-sky microwave observations is very limited. Two main factors contributing to this limitation are inaccuracy in the input cloud and hydrometeor profiles used as input to the radiative transfer model and also error in scattering calculations performed by the radiative transfer model itself. The Mie theory is used by many fast RT models to estimate the optical properties of single particles. The Mie theory assumes spherical shapes for ice or snow particles with mixture of air and ice. However, hydrometeors scattering radiation at microwave frequencies have different shapes, sizes, and orientations. Therefore, using Mie theory to determine their optical properties leads to large uncertainties in all-sky radiative transfer calculations. The discrete dipole approximation (DDA) which approximates the optical properties of large objects in terms of discrete dipoles has shown promise in calculating the scattering properties of particles with different shapes in the microwave frequencies. This presentation focuses on recent advancements in the CRTM scattering calculations for frozen hydrometeors in the microwave frequencies using the DDA technique. In addition to using stand-alone CRTM calculations using collocated ATMS and reanalysis profiles, the data assimilation experiments conducted using the NOAA FV3GFS forecast system are used to evaluate the scattering improvements. Additionally, the backscattering information from the DDA database was used to implement a radar simulator into CRTM. The radar operator takes advantage of CRTM different modules to calculate clouds absorption and scattering properties. In addition to the forward model both adjoint and tangent linear of the radar simulator are implemented and evaluated as well. The radar simulator is currently being tested within the JEDI/GEOS data assimilation framework to facilitate the assimilation of radar measurements such as CloudSat CPR and GPM DPR into the NASA GEOS model.

Isaac Moradi↗