Search NASA⌕ Search

SEARCH · Search NASA

Results for “Low”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Impact of low reactivity fuel type on low load combustion, emissions, and cyclic variations of diesel-ignited dual fuel combustion

In this study, cyclic variations in dual fuel combustion with diesel ignition of three different low reactivity fuels (methane, propane, and gasoline) are examined under identical operating conditions. Experiments were performed on a single cylinder research engine (SCRE) at a low load of 3.3 bar brake mean effective pressure (BMEP). The start of injection (SOI) of diesel was varied from 280 to 330 absolute crank angle degrees (CAD). Engine speed, rail pressure, and boost pressure were held constant at 1500 rpm, 500 bar, and 1.5 bar, respectively. The energy substituted by the low reactivity fuel was fixed at 80% of the total energy input. It was found that diesel-methane (DM) and diesel-propane (DP) combustion were affected by diesel mixing to a greater extent than diesel-gasoline (DG) combustion due to the higher reactivity of gasoline. The magnitude of low temperature heat release was greatest for DG combustion followed by DM and DP combustion for all SOIs. The ignition delay for DG combustion was the shortest, followed by DM and DP combustion. DM and DP combustion exhibited more cyclic variations than DG combustion. Cyclic variations decreased for DM and DP combustion when SOI was advanced; however, DG combustion cyclic variations remained essentially constant for all SOIs. Earlier SOIs (280, 290, 300, and 310 CAD) for DM and (280, 290, and 300 CAD) for DP combustion indicated some prior-cycle effects on the combustion and IMEP (i.e. some level of determinism).

Engineering↗
DOE OSTI2019

Search for Low-Mass Dark Matter with CDMSlite Using a Profile Likelihood Fit

The Cryogenic Dark Matter Search low ionization threshold experiment (CDMSlite) searches for interactions between dark matter particles and germanium nuclei in cryogenic detectors. The experiment has achieved a low energy threshold with improved sensitivity to low-mass (<10 GeV/c2) dark matter particles. We present an analysis of the final CDMSlite data set, taken with a different detector than was used for the two previous CDMSlite data sets. This analysis includes a data "salting" method to protect against bias, improved noise discrimination, background modeling, and the use of profile likelihood methods to search for a dark matter signal in the presence of backgrounds. We achieve an energy threshold of 70 eV and significantly improve the sensitivity for dark matter particles with masses between 2.5 and 10 GeV/c2 compared to previous analyses. We set an upper limit on the dark matter-nucleon scattering cross section in germanium of 5.4×10-42 cm2 at 5 GeV/c2, a factor of ~2.5 improvement over the previous CDMSlite result.

Agnese, R↗
DOE OSTI2019

Low-Energy, Low-Cost Ethylene Production by Low-Temperature Oxidative Coupling of Methane

Ethylene, one of the highest volume production chemicals in the U.S. and globally, is an essential chemical building block that is used to manufacture countless products, from packaging to antifreeze to tires. Most ethylene is produced via a process called steam cracking, where the feedstock (mostly ethane, sometimes naphtha or propane) is heated to high temperatures over a catalyst. The naphtha feedstock typically comes from petroleum refineries, while ethane is becoming increasingly used as a feedstock in the U.S. due to the rise in domestic natural gas production from shale resources. However, steam cracking is energy intensive and occurs in large- scale facilities. Low-temperature oxidative coupling of methane (LT-OCM) is an alternative ethylene production method that converts methane (natural gas) and optionally ethane to ethylene in a single-step, energy-producing conversion system using an innovative process. While OCM has been studied for over 30 years due to its potential to reduce ethylene production cost, past efforts did not result in a viable catalyst with performance needed for commercialization. These catalysts, while at times achieving promising yield and selectivity, were hampered by very high operating temperatures, low activities, and short lifetimes on the order of hours to days. Recognizing this, Siluria applied a combination of new innovations in catalyst development and a thorough definition and understanding of the problem to develop unique catalysts that enable commercialization of OCM. The OCM catalysts operate at significantly lower temperature (several hundreds of degrees lower) and practical operating pressures (5-10 atmospheres), have high activities and standard lifetimes of years under said conditions. In addition, the simple process provides excellent scalability and flexibility, especially when compared to today’s mega-scale steam crackers, thus enabling small- volume “distributed scale” reactors for on-demand ethylene production for applications such as on-site conversion of ethylene to high value polymer derivatives.

02 PETROLEUM↗
DOE OSTI2019

International Low Level Waste Management Practices and Technical Bases for Very Low Level Waste Classification - 19415

Different countries around the globe use varying schemes for the classification of radioactive waste. Many countries use adaptations of the International Atomic Energy Agency (IAEA) waste classification scheme. The United States uses the Class A, B, and C waste classification scheme that is loosely based on the IAEA concepts. Classification may be based on concentration limits or dose rate limits or a combination of concentration and dose rate limits. In some countries the existence of very low-level waste categories allows nuclear power plant waste to be disposed of in hazardous waste or shallow land burial sites separate from low and intermediate level waste disposal facilities. In the United States, the very low-level waste (VLLW) classification does not exist. Nuclear power plants use alternative disposal procedures under 10CFR20.2002 and other licensed processes in agreement states in order to dispose of very low activity waste in hazardous waste disposal sites. [1] Disposal of VLLW in hazardous waste or separate VLLW facilities is generally more cost effective than disposing of waste in radioactive waste sites and is protective of the health and safety of the public. This can become an important factor when large volumes of very low activity waste are generated during decommissioning of nuclear power plants. The Electric Power Research Institute (EPRI) Radiation Safety (RS) Program has developed technical bases for the establishment of a very low-level waste category. EPRI studied how VLLW waste is defined, managed, and disposed of in various countries. This included the study of disposal site design, characteristics, and how these sites protect the health and safety of the environment and the public from low levels of radioactivity. EPRI conducted a cost benefit analysis to understand the economic impact of disposing VLLW in hazardous waste disposal sites versus low-level waste disposal sites. Finally, EPRI calculated potential radionuclide limits that may be used to define very low-level waste. The purpose of this work was to provide an example of how one might approach defining limits for VLLW. The same or similar approaches could be applied to derive radionuclide limits for different dose limit objectives. This paper presents the results of research that explored the waste management and disposal practices at six countries around the world with additional focus and details on the implementation of the very low-level waste category. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2021

Thermal Stability and Lattice Strain Evolution of High-Nb-Containing TiAl Alloy under Low-Cycle-Fatigue Loading

The micromechanical behavior and the effect of temperature on the micromechanical mechanism of high-Nb-containing TiAl alloy during low-cycle fatigue still remain uncertain. Herein, in situ and ex situ synchrotron-based high-energy X-ray (HEXRD) experiment results reveal that the gamma and omega(o) phases suffer compressive lattice strains but the lattice strain in the alpha(2) phase evolves from tensile to compressive during low-cycle fatigue at 900 degrees C. In addition, the three phases suffer compressive lattice strains during cooling to room temperature, which could result in larger compressive lattice strains in gamma and omega(o) phases and the change of the lattice strain state in the alpha(2) phase. The peak-broadening results show gamma recrystallization is dominant in the interrupted low-cycle-fatigue samples, whereas inhomogeneous deformation occurs in the failed low-cycle-fatigue samples. The performed synchrotron diffraction experiments offer a deeper insight into the phase transformations and micromechanism of TiAl alloy during low-cycle fatigue.

cyclic stress-strain behavior↗
DOE OSTI2023

Mobility Gaps between Low-Income and Not Low-Income Households: A Case Study in New York State

Understanding the travel challenges faced by low-income residents has always been and continues to be one of the most important transportation equity topics. This study aims to explore the mobility gaps between low-income households (HHs) and not low-income HHs, and how the gaps vary within different socio-demographic population groups in New York State (NYS). The latest National Household Travel Survey data was used as the primary data source for the analysis. The study first employed the K-prototype clustering algorithm to categorize the HHs in NYS based on their socio-demographic attributes. Five population groups were identified based on nine different household (HH) features such as HH size, vehicle ownership, and elderly status of its members. Then, the mobility differences, measured by trip frequency, trip distance, travel time, and person miles traveled, were examined among the five population groups. Results suggest that the individuals in low-income HHs consistently took fewer trips and made shorter trips compared to their not low-income counterparts in NYS. The travel distance gaps were most obvious among white HHs with more vehicles than drivers. In addition, while the population from low-income HHs made shorter trips on average (2.7 mi shorter per trip), they experienced longer travel time than those from not low-income HHs (1.8 min longer per trip). These key findings provide a deeper understanding of the travel behavior disparities between low-income and not low-income households. The findings could also support policymakers and transportation planners in addressing the critical needs of residents in low-income households in NYS and provide inputs for designing a more equitable transportation system.

Liu, Yuandong↗
DOE OSTI2021

Surfactant-Aided Low-Salinity Waterflooding for Low-Temperature Carbonate Reservoirs

Carbonate reservoirs tend to be oil-wet/mixed-wet and heterogeneous because of mineralogy and diagenesis. The objective of this study is to improve oil recovery in low-temperature dolomite reservoirs using low-salinity and surfactant-aided spontaneous imbibition. The low-salinity brine composition was optimized using ζ-potential measurements, contact-angle (CA) experiments, and a novel wettability-alteration measure. Significant wettability alteration was observed on dolomite rocks at a salinity of 2,500 ppm. We evaluated 37 surfactants by performing CA, interfacial-tension (IFT), and spontaneous-imbibition experiments. Here, three (quaternary ammonium) cationic and one (sulfonate) anionic surfactants showed significant wettability alteration and produced 43–63% of original oil in place (OOIP) by spontaneous imbibition. At a low temperature (35°C), oil recovery by low-salinity effect is small compared with that by wettability-altering surfactants. Coreflood tests were performed with a selected low-salinity cationic surfactant solution. A novel coreflood was proposed that modeled heterogeneity and dynamic imbibition into low-permeability regions. The results of the “heterogeneous” coreflood were consistent with that of spontaneous-imbibition tests. These experiments demonstrated that a combination of low-salinity brine and surfactants can make originally oil-wet dolomite rocks more water-wet and improve oil recovery from regions bypassed by waterflood at a low temperature of 35°C.

02 PETROLEUM↗
DOE OSTI2024

Geospatial characterization of low-temperature heating and cooling demand in residential, commercial, manufacturing, agricultural, and data center sectors for potential geothermal applications in the United States

Thermal demand for heating and cooling has been predominantly supplied by fossil fuel combustion in the United States, although low-carbon alternatives are extensively available including geothermal, solar thermal, and waste heat. Here, this study analyzed end-use energy consumption, fuel expenditure, and data center commissioned power data to geospatially characterize the U.S. low-temperature heating and cooling demand at the county level in residential, commercial, manufacturing, agricultural, and data center sectors and understand potential opportunities for geothermal applications. In the analysis, the regional-scale energy consumption data was incorporated with system efficiencies to address actual demand and was then disaggregated with weighting factors to the county level. The results indicated that total low-temperature heating and cooling demand is 16.7 EJ, combining heating demand of 10.8 EJ and cooling demand of 5.9 EJ. Overall, 59.9 % (10 EJ) of the low-temperature heating and cooling demand occurred in the residential sector. The heating and cooling demand visualized in maps represented that the geospatial distribution of heating and cooling demand in the residential and commercial sectors is governed by the number of housing units and climate zone designations, while heating and cooling demand in the manufacturing, agricultural, and data center sectors is dependent on the number and location of facilities. The results also demonstrated that geothermal heat pumps are broadly used in the residential and commercial sectors for heating and cooling in the U.S. Midwest, South, and Northeast regions but are limited in the West, implying great decarbonization potential in the future.

15 GEOTHERMAL ENERGY↗
DOE OSTI2023

Control of low-mode drive asymmetry in an efficient long-pulse low gas-fill density Hohlraum

Laser-driven Hohlraums filled with gas at lower densities (<0.6 mg/cc) have higher efficiency compared to original ≥ 0.96 mg/cc fill because of reduced backscatter losses [Hall et al., Phys. Plasmas 24, 052706 (2017)]. However, using low-density filled Hohlraums with longer drive required for lower adiabat implosions, and hence potentially higher inertial confinement fusion gain designs, has been challenging since the Hohlraum wall blow-off is less tamped, thus altering the laser beam absorption regions and drive symmetry. A series of NIF experiments using optimized pulse shaping, beam pointing, and temporal phasing have demonstrated, through imaging of the Hohlraum and capsule dynamics, that a symmetric implosion using a 14-ns low-adiabat drive pulse {2× longer than high-density-carbon ablator designs using low gas-fill density Hohlraums [Divol et al., Phys. Plasmas 24, 056309 (2017)]} is possible in a low backscatter loss 0.45 mg/cc He-filled Hohlraum. The ingress of the Hohlraum walls was mitigated by revisiting the adiabat-shaped design [Clark et al., Phys. Plasmas 21, 112705 (2014)] that uses a low-power (1 TW) trough that delays the wall expansion. Low-mode P 2 and P 4 drive asymmetry swings caused by the drift of the laser spots were essentially zeroed out by employing temporal beam phasing between cones of beams [Turner et al., Phys. Plasmas 7, 333 (2000)]. So the results also indicate an improved coupling efficiency of ~30% compared to an earlier design using higher density filled Hohlraums and pave the way for revisiting low-adiabat, high convergence drives using CH ablators.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2020

Transients using low-high pulsed power in inductively coupled plasmas

Pulsed inductively coupled plasmas (ICPs) are widely deployed in the fabrication of semi-conductor devices. Pulse repetition frequencies (PRFs) of up to tens of kHz are commonly used during plasma etching for the high power densities they generate during the pulse-on period, and for their unique chemistries during the pulse-off period. The use of highly attaching halogen gases produces low electron densities during the pulse-off period, and these low density can result in instabilities, E-H transitions and ignition delays when applying power on the next pulse. To mitigate these possibilities, a low-level power environment could be maintained during “pulse-off” to moderate the minimum plasma density, therefore reducing ignition delays and enhancing plasma stability. In this work, ICPs sustained by 5 kHz pulsed power using Ar/Cl 2 mixtures at 20 mTorr were computationally investigated. For these conditions, the computed electron temperature (T e ) reaches a quasi-steady state during both the high- and low-power excitation. The model predicts that within the electromagnetic skin-depth, T e spikes to a high value during a low-to-high power modulation, and to a low value during a high-to-low power modulation. At the same time, a few cm above the substrate, there is little modulation in T e , as electron power convected from the skin depth disperses in traversing the reactor. Finally, the positive and negative spikes, and convection of transients across the reactors, are functions of power ramping time and gas mixtures.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2018

Fabrication of Low-Tortuosity Ultrahigh-Area-Capacity Battery Electrodes through Magnetic Alignment of Emulsion-Based Slurries

High energy–density, low–cost batteries are critically important to a variety of applications ranging from portable electronics to electric vehicles (EVs) and grid–scale storage. While tremendous research effort has been focused on new materials or chemistries with high energy–density potential, design innovations such as low–tortuosity thick electrodes are another promising path toward higher energy density and lower cost. Growing demand for fast–charging batteries has also highlighted the need for negative electrodes that can accept high rate charging without metal deposition; low tortuosity can be a benefit in this regard. However, a general and scalable fabrication method for low–tortuosity electrodes is currently lacking. Here an emulsion–based, magnetic–alignment approach to producing thick electrodes (>400 µm thickness) with ultrahigh areal capacity (up to ≈14 mAh cm –2 vs 2–4 mAh cm –2 for conventional lithium ion) is reported. The process is demonstrated for LiCoO 2 and meso–carbon microbead graphite. The LiCoO 2 cathodes are confirmed to have low tortuosity via DC–depolarization experiments and deliver high areal capacity (>10 mAh cm –2 ) in galvanostatic discharge tests at practical C–rates and model EV drive–cycle tests. Lastly, this simple fabrication method can potentially be applied to many other active materials to enable thick, low–tortuosity electrodes.

25 ENERGY STORAGE↗