Search NASA⌕ Search

SEARCH · Search NASA

Results for “Low atomic mass metal”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS2023

Mitigating Space Radiation Using Magnesium(-Lithium) and Boron Carbide Composites

The health effects of galactic cosmic radiation are a serious impediment to crewed exploration of the solar system. OLTARIS, an interface for the 3DHZETRN deterministic radiation transport code, was used to assess the response of aerospace materials to this constant radiation exposure. Traditional aerospace structural materials like aluminum can, after a certain mass, increase the health effects of such radiation. However, materials with lower atomic mass may mitigate this build-up in secondary radiation with increasing areal density. As such, lower atomic mass structural alloys of magnesium and magnesium–lithium are promising candidates. These alloys may reduce the mass of structures when substituted for aluminum alloys. Reinforcement with boron carbide could further reduce atomic mass while also improving the mechanical properties of such lightweight alloys. This study found that the lower atomic mass of these materials increased nuclear fragmentation upon cosmic radiation interactions, leading to a softening of the secondary (neutron) radiation spectra. This softened spectra reduced the effective dose equivalent, a measure of health effects, for magnesium(-lithium) alloys and their boron carbide-reinforced composites when compared to aluminum.

Galactic cosmic radiation↗
NASA NTRS2016

The Double-Peaked SN 2013ge: A Type Ib/c Sn with an Asymmetric Mass Ejection or an Extended Progenitor Envelope

We present extensive multiwavelength (radio to X-ray) observations of the Type Ib/c supernova (SN Ib c) SN 2013ge from -13 to +457 days relative to maximum light, including a series of optical spectra and Swift UV-optical photometry beginning 2-4 days post-explosion. This data set makes SN 2013ge one of the best-observed normal SNe Ib/c at early times-when the light curve is particularly sensitive to the progenitor configuration and mixing of radioactive elements -and reveals two distinct light curve components in the UV bands. The first component rises over 4-5 days and is visible for the first week post-explosion. Spectra of the first component have blue continua and show a plethora of moderately high velocity (approximately 15,000 km/s) but narrow (approximately 3500 km/s)spectroscopic features, indicating that the line-forming region is restricted. The explosion parameters estimated for the bulk explosion (M(sub ej) approximately 23 solar mass; E(subK) approximately (1-2) x 10(exp 51) erg) are standard for SNe Ib/c, and there is evidence forweak He features at early times-in an object that would have otherwise been classified as Type Ic. In addition,SN 2013ge exploded in a low-metallicity environment (approximately 0.5 atomic mass), and we have obtained some of the deepest radio and X-ray limits for an SN Ib/c to date, which constrain the progenitor mass-loss rate to be M less than 4 x 10(exp -6) solar mass/yr. We are left with two distinct progenitor scenarios for SN 2013ge, depending on our interpretation of the early emission. If the first component is cooling envelope emission, then the progenitor of SN 2013ge either possessed an extended (greater than or approximately 30 solar radius) envelope or ejected a portion of its envelope in the final less than or approximately 1 yr before core collapse. Alternatively, if the first component is due to outwardly mixed Ni-56, then our observations are consistent with the asymmetric ejection of a distinct clump of nickel-rich material at high velocities. Current models for the collision of an SN shock with a binary companion cannot reproduce both the timescale and luminosity of the early emission in SN 2013ge. Finally, the spectra of the first component of SN 2013ge are similar to those of the rapidly declining SN 2002bj.

supernovae: general – supernovae: individual (SN↗
DOE OSTI2024

The atomic gas sequence and mass–metallicity relation from dwarfs to massive galaxies

Galaxy scaling relations provide insights into the processes that drive galaxy evolution. The extension of these scaling relations into the dwarf galaxy regime is of particular interest. This is because dwarf galaxies represent a crucial stage in galaxy evolution, and understanding them could also shed light on their role in reionizing the early Universe. There is currently no consensus on the processes that dominate the evolution of dwarfs. In this work, we constrain the atomic gas sequence (stellar mass versus atomic gas fraction) and mass–metallicity relation (stellar mass versus gas-phase metallicity) from dwarf (⁠10 6.5 M ⊙ ⁠) to massive (⁠10 11.5 M ⊙ ) galaxies in the local Universe. The combined optical and 21-cm spectroscopic observations of the Dark Energy Spectroscopic Instrument and Arecibo Legacy Fast ALFA surveys allow us to constrain both scaling relations simultaneously. We find a slope change of the atomic gas sequence at a stellar mass of ~10 9 M ⊙ ⁠. We also find that the shape and scatter of the atomic gas sequence and mass–metallicity relation are strongly linked for both dwarfs and more massive galaxies. Consequently, the low-mass slope change of the atomic gas sequence is imprinted onto the mass–metallicity relation of dwarf galaxies. The mass scale of the measured slope change is consistent with a predicted escape velocity threshold below which low-mass galaxies experience significant supernova-driven gas loss, as well as with a reduction in cold gas accretion onto more massive galaxies.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2024

Approaching Angstrom-Scale Resolution in Lithography Using Low-Molecular-Mass Resists (<500 Da)

Resists that enable high-throughput and high-resolution patterning are essential in driving the semiconductor technology forward. The ultimate patterning performance of a resist in lithography is limited because of the trade-off between resolution, line-width roughness, and sensitivity; improving one or two of these parameters typically leads to a loss in the third. As the patterned feature sizes approach angstrom scale, the trade-off between these three metrics becomes increasingly hard to resolve and calls for a fundamental rethinking of the resist chemistry. Low-molecular-mass monodispersed metal-containing resists of high atom economy can provide not only very high resolution but also very low line-width roughness without sacrificing sensitivity. Here we describe a modular metal-containing resist platform (molecular mass <500 Da) where a molecular resist consists of just two components: a metal and a radical initiator bonded to it. This simple system not only is amenable to high-resolution electron beam lithography (EBL) and extreme ultraviolet lithography (EUVL) but also unites them mechanistically, giving a consolidated perspective of molecular and chemical processes happening during exposure. Irradiation of the resist leads to the production of secondary electrons that generate radicals in the initiator bonded to metal. This brings about an intramolecular rearrangement and causes solubility switch in the exposed resist. We demonstrate record 1.9–2.0 nm isolated patterns and 7 nm half-pitch dense line-space features over a large area using EBL. With EUVL, 12 nm half-pitch line-space features are shown at a dose of 68 mJ/cm 2 . In both of these patterning techniques, the line-width roughness was found to be ≤2 nm, a record low value for any resist platform, also leading to a low-performance trade-off metric, Z factor, of 0.6 × 10 –8 mJ·nm 3 . With the ultimate resolution limited by instrumental factors, potential patterning at the level of a unit cell can be envisaged, making low-molecular-mass resists best poised for angstrom-scale lithography.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
NASA NTRS1979

Mass effects on angular distribution of sputtered atoms

Sputtering metal targets at low ion energies (Hg or Ar at less than 300 eV) under normal ion incidence causes the lighter atoms (lighter isotopes or lighter elements of alloys) to be preferentially ejected in a direction normal to the target surface. Experimental results are shown for several elements and alloys at various bombardment energies. The amount of enrichment of the lighter species normal to the target surface decreases quite rapidly with increasing ion energy. The phenomenon is a result of reflective collisions because lighter atoms can be backscattered from heavier ones underneath but not vice versa. The effect provides an explanation of why solar-wind-exposed lunar material is enriched in the heavier isotopes, since sputtered lower-mass elements have a higher chance of achieving the lunar escape velocity.

Olson, R. R.↗
DOE OSTI2025

Athermal phonon collection efficiency in diamond crystals for low mass dark matter detection

Here, we explored the efficacy of lab-grown diamonds as potential target materials for the direct detection of sub-GeV dark matter (DM) using metallic magnetic calorimeters (MMCs). Diamond, with its excellent phononic properties and the low atomic mass of the constituent carbon, can play a crucial role in detecting low mass dark matter particles. The relatively long electron-hole pair lifetime inside the crystal may provide discrimination power between the DM-induced nuclear recoil events and the background-induced electron recoil events. Utilizing the fast response times of the MMCs and their unique geometric versatility, we deployed a novel methodology for quantifying phonon dynamics inside diamond crystals. We demonstrated that lab-grown diamond crystals fabricated via the chemical vapor deposition (CVD) technique can satisfy the stringent quality requirements for sub-GeV dark matter searches. The high-quality polycrystalline CVD diamond showed a superior athermal phonon collection efficiency compared to that of the reference sapphire crystal, and achieved energy resolution 62.7 eV at the 8.05 keV copper fluorescence line. With this energy resolution, we explored the low-energy range below 100 eV and confirmed the existence of so-called low-energy excess (LEE) reported by multiple cryogenic experiments.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
NASA NTRS1991

An e.s.c.a. study of atomic oxygen interactions with phosphazene-coated polyimide films

Metallic as well as most nonmetallic materials experience oxidation and mass loss via surface erosion in low earth orbit as shown in previous Space Shuttle flights. This study is an evaluation of select polyphosphazene polymers and their resistance to atomic oxygen attack. Electron spectroscopy for chemical analysis examinations of the surfaces of polyphosphazene coatings were monitored for microstructural changes induced during exposures to atomic oxygen. Sample exposures in oxygen plasmas and O(3P) beam were compared as to their effect on surface compositional changes in the polyphosphazene coating. High resolution line scans revealed rearrangements in the polymer backbone and scissioning reactions involving fluorocarbon units of long chain fluoroalkoxy pendant groups. Atom percents and peak areas of all species provided a detailed profile of the microstructural changes induced in phosphazene polymers as a result of exposures to atomic oxygen.

Fewell, Larry L.↗
DOE OSTI2021

Correlating Nanoscale Secondary Ion Mass Spectrometry and Atom Probe Tomography Analysis of Uranium Enrichment in Metallic Nuclear Fuel

Distribution and enrichment of 235U within nuclear fuels are essential to material performance and reactor safety. With the development of metallic U fuels, understanding 235U homogeneity has become increasingly important, however, it is difficult to map with high spatial, and mass resolution to analyze both matrix and secondary phase precipitates. Here, we analyze 235U enrichment in matrix and carbide phases in LEU-Mo via two chemical imaging modalities: nanoscale secondary ion mass spectrometry (nanoSIMS) and atom probe tomography (APT). NanoSIMS and APT provided consistent results, with no statistically significant difference between measured and nominal enrichment (19.75 % 235U).

U-10Mo, atom probe tomography, nanoscale secondary↗
NASA NTRS2012

Development of Metallic Magnetic Calorimeters for High Precision Measurements of Calorimetric Re-187 and Ho-163 Spectra

The measurement of calorimetric spectra following atomic weak decays, beta (b) and electron capture (EC), of nuclides having a very low Q-value, can provide an impressively high sensitivity to a non-vanishing neutrino mass. The achievable sensitivity in this kind of experiments is directly connected to the performance of the used detectors. In particular an energy resolution of a few eV and a pulse formation time well below 1 microsecond are required. Low temperature Metallic Magnetic Calorimeters (MMCs) for soft X-rays have already shown an energy resolution of 2.0 eV FWHM and a pulse rise-time of about 90 ns for fully micro-fabricated detectors. We present the use of MMCs for high precision measurements of calorimetric spectra following the beta-decay of Re-187 and the EC of Ho-163. We show results obtained with detectors optimized for Re-187 and for Ho-163 experiments respectively. While the detectors equipped with superconducting Re absorbers have not yet reached the aimed performance, a first detector prototype with a Au absorber having implanted Ho-163 ions already shows excellent results. An energy resolution of 12 eV FWHM and a rise time of 90 ns were measured.

Ranitzsch, P. C.-O.↗
DOE OSTI2023

Free-standing membrane incorporating single-atom catalysts for ultrafast electroreduction of low-concentration nitrate

The release of wastewaters containing relatively low levels of nitrate (NO 3 ⁻) results in sufficient contamination to induce harmful algal blooms and to elevate drinking water NO 3 ⁻ concentrations to potentially hazardous levels. In particular, the facile triggering of algal blooms by ultra-low concentrations of NO 3 ⁻ necessitates the development of efficient methods for NO 3 ⁻ destruction. However, promising electrochemical methods suffer from weak mass transport under low reactant concentrations, resulting in long treatment times (on the order of hours) for complete NO 3 ⁻ destruction. In this study, we present flow-through electrofiltration via an electrified membrane incorporating nonprecious metal single-atom catalysts for NO 3 ⁻ reduction activity enhancement and selectivity modification, achieving near-complete removal of ultra-low concentration NO 3 ⁻ (10 mg-N L -1 ) with a residence time of only a few seconds (10 s). By anchoring Cu single atoms supported on N-doped carbon in a carbon nanotube interwoven framework, we fabricate a free-standing carbonaceous membrane featuring high conductivity, permeability, and flexibility. The membrane achieves over 97% NO 3 ⁻ removal with high N 2 selectivity of 86% in a single-pass electrofiltration, which is a significant improvement over flow-by operation (30% NO 3 ⁻ removal with 7% N 2 selectivity). This high NO 3 ⁻ reduction performance is attributed to the greater adsorption and transport of nitric oxide under high molecular collision frequency coupled with a balanced supply of atomic hydrogen through H 2 dissociation during electrofiltration. Overall, our findings provide a paradigm of applying a flow-through electrified membrane incorporating single-atom catalysts to improve the rate and selectivity of NO 3 ⁻ reduction for efficient water purification.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS2023

Far-Infrared Line Emission from the Outer Galaxy Cluster Gy 3–7 With SOFIA/FIFI-LS: Physical Conditions and UV Fields

Context. Far-infrared (FIR) line emission provides key information about the gas cooling and heating due to shocks and UV radiation associated with the early stages of star formation. Gas cooling via FIR lines might, however, depend on metallicity. Aims. We aim to quantify the FIR line emission and determine the spatial distribution of the CO rotational temperature, ultraviolet (UV) radiation field, and H2 number density toward the embedded cluster Gy 3–7 in the CMa–l224 star-forming region, whose metallicity is expected to be intermediate between that of the Large Magellanic Cloud and the Solar neighborhood. By comparing the total luminosities of CO and [O I] toward Gy 3–7 with values found for low- and high-mass protostars extending over a broad range of metallicities, we also aim to identify the possible effects of metallicity on the FIR line cooling within our Galaxy. Methods. We studied SOFIA/FIFI-LS spectra of Gy 3–7, covering several CO transitions from J = 14–13 to 31-30, the OH doublet at 79 µm, the [O I] 63.2 and 145.5 µm, and the [C II] 158 µm lines. The field of view covers a 2 0 × 1 0 region with a resolution of ∼7 00–1800 . Results. The spatial extent of CO high-J (Jup ≥14) emission resembles that of the elongated 160 µm continuum emission detected with Herschel, but its peaks are offset from the positions of the dense cores. The [O I] lines at 63.2 µm and 145.5 µm follow a similar pattern, but their peaks are found closer to the positions of the cores. The CO transitions from J = 14–13 to J = 16–15 are detected throughout the cluster and show a median rotational temperature of 170 ± 30 K on Boltzmann diagrams. Comparisons to other protostars observed with Herschel show a good agreement with intermediate-mass sources in the inner Galaxy. Assuming an origin of the [O I] and high-J CO emission in UV-irradiated C−shocks, we obtained pre-shock H2 number densities of 104–105 cm−3 and UV radiation field strengths of 0.1–10 Habing fields (G0). Conclusions. Far-IR line observations reveal ongoing star formation in Gy 3–7, dominated by intermediate-mass Class 0/I young stellar objects. The ratio of molecular-to-atomic far-IR line emission shows a decreasing trend with bolometric luminosities of the protostars. However, it does not indicate that the low-metallicity has an impact on the line cooling in Gy 3–7.

stars: formation↗
DOE OSTI2022

Atomically dispersed Pt and Fe sites and Pt–Fe nanoparticles for durable proton exchange membrane fuel cells

Proton exchange membrane fuel cells convert hydrogen and oxygen into electricity without emissions. The high cost and low durability of Pt-based electrocatalysts for the oxygen reduction reaction hinder their wide application, and the development of non-precious metal electrocatalysts is limited by their low performance. Here we design a hybrid electrocatalyst that consists of atomically dispersed Pt and Fe single atoms and Pt–Fe alloy nanoparticles. Its Pt mass activity is 3.7 times higher than that of commercial Pt/C in a fuel cell. More importantly, the fuel cell with a low Pt loading in the cathode (0.015 mg Pt cm –2 ) shows an excellent durability, with a 97% activity retention after 100,000 cycles and no noticeable current drop at 0.6 V for over 200 hours. These results highlight the importance of the synergistic effects among active sites in hybrid electrocatalysts and provide an alternative way to design more active and durable low-Pt electrocatalysts for electrochemical devices.

25 ENERGY STORAGE↗
DOE OSTI2025

Lithium's low-temperature phase transitions: Insights into quantum lattice dynamics and superconductivity

The large lattice dynamics of lithium, driven by its low atomic mass, results in energetically similar structures and significant isotope effects under pressure, posing challenges to current theoretical models. Above 20 GPa and at low temperatures, lithium's electronic properties deviate from simple metallic behavior, with superconductivity emerging in a complex, pressure-dependent manner, alongside an unusual isotope effect. The structural phases of 7 Li reported under these conditions are inconsistent across studies, and the structures of 6 Li remain unexamined. These gaps limit our understanding of the effects of pressure on lithium's electronic properties and the role of quantum lattice effects on its structural behavior under pressure. Here, we integrate experimental and theoretical approaches to investigate the low-temperature structural phase boundaries in lithium isotopes. We map the structural phase diagram of 7 Li from 5 to 55 GPa and 15–75 K, identifying the sequence fcc → ℎ⁡R⁢1 → cI16. A pronounced isotope effect is observed, with 6 Li shifting the fcc → ℎ⁡R⁢1 phase boundary to lower pressures at 15 K. Density functional theory calculations further clarify how these structural changes affect superconducting properties, particularly emphasizing the role of the fcc → ℎ⁡R⁢1 transition in lithium's superconductivity. Furthermore, our findings offer insights into the unique behavior of lithium isotopes under pressure.

36 MATERIALS SCIENCE↗
NASA NTRS1985

Solar abundances and the role of nucleogenesis in low-to-medium mass stars in the galaxy

The pattern of solar elemental abundances agrees well with that shown by Cl chondrites for nonvolatile elements. For metals of the iron peak, the chief source of uncertainty seems to be the structure of the solar atmosphere. Lines of rare elements are frequently masked by atomic and molecular lines of abundant species. The vast majority of stars (including the sun) will do little to change the bulk composition of the interstellar medium from which new stars are formed. He, C, and N in small quantities are supplied by stars from 1 to 8 solar masses as they evolve and produce nebular envelopes that dissipate into the interstellar medium, but as has long been recognized, oxygen, heavier elements, and all r-process and proton-rich nuclides are made in massive stars.

Aller, L. H.↗
NASA NTRSDate not supplied

Inflatable Softgoods Testing Capability Development for Habitation

The Habitation Systems Development Office (HP40) at NASA Marshall Space Flight Center supports systems engineering, integration, and project management for next generation space habitats. The office is responsible for formulation activities for Lunar Surface Habitat and Mars Transit Habitat. HP40 also manages commercial partnerships for exploration habitat development. The Lunar Surface Habitat is intended to initially support a minimum of two crew on the lunar surface for an approximately 30-day mission, with the ability to accommodate four crew for short durations. The Mars Transit Habitat will transport four crew to and from Mars orbit on a potentially 1,200 day mission. Both concepts are envisioned to leverage inflatable softgoods as the primary structural material for the habitation portion of the architecture. Inflatable softgoods are a complex, multi-material system consisting of multiple layers which perform specific functions. A bladder layer (polymer) contains the habitat’s atmosphere. The bladder is indexed to a woven restraint layer, usually Kevlar or Vectran, which serves as the structural layer. The remaining outer layers are for micro-meteoroid orbital debris (MMOD) shielding, protection from atomic Oxygen (if the material system is to be deployed in low earth orbit), and thermal insulation. The primary advantage of inflatable softgoods is that they can offer a larger volume per unit mass relative to a rigid metal structure. Inflatable softgoods have a strong development heritage within NASA, beginning with work in the 1960s in partnership with Goodyear Aerospace and continuing with Johnson Space Center’s TransHab project in the 1990s . Some development efforts subsequently transitioned into the private sector to mature the material technology for flight applications, including human habitation. In August 2022, NASA published its guidelines for certification of crewed inflatable softgoods structures (JSC-67721). This document outlines a series of tests which will be needed to certify inflatable softgoods material systems for use in crewed mission applications. It includes burst testing at the subscale and full-scale to determine the ultimate burst pressure of the softgoods architecture. Creep (long term deformation of the material under stress) is a key failure mode which must be characterized. Creep testing at the component and module levels is also recommended to generate time to failure curves and verify that the inflatable system has a predicted operational life which exceeds mission parameters. ET (Test Engineering) at MSFC and HP40 have worked together to establish softgoods testing capabilities for the center. This includes the ability to conduct module level burst tests and creep tests. The poster will highlight these capabilities and provide examples of testing which has been performed to date by ET. NASA MSFC anticipates that these test capabilities will continue to offer critical support for companies pursuing inflatable softgoods for exploration applications (lunar surface habitation, Mars transit) as well as commercial low earth orbit platforms.

habitation↗
DOE OSTI2025

Nodal hybridization in a two-dimensional heavy-fermion material

Metals with partially filled core atomic shells can form quasiparticles at a low temperature arising from the hybridization of the core level and conduction electrons. The thermodynamic and spectroscopic properties of these metals can be understood as those of a simple metal, but with a significant mass enhancement over the free electron mass—commonly referred to as heavy fermions. In most heavy-fermion materials, the hybridization is approximately isotropic in position and momentum space. However, a combination of low dimensionality and symmetry properties of the core-level wavefunctions can give rise to highly anisotropic electronic interactions with the conduction electrons. Here, in this study, we demonstrate anisotropic hybridization that vanishes along specific directions in momentum space—referred to as nodes—in a lanthanide-based two-dimensional van der Waals heavy-fermion compound, CeSiI. Quasiparticle interference measurements reveal a set of discrete hotspots with high spectral intensity on the Fermi surface. Theoretical modelling and comparison with the quasiparticle interference pattern of the non-heavy-fermion isostructural analogue LaSiI suggest that these features arise from an unconventional electron interaction involving hybridization nodes unique to CeSiI. As a result, the effective mass of the quasiparticles varies by orders of magnitude depending on their direction in momentum space.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Industrializable interlayer with catalytic conversion of dead lithium for Ah–level Nickel–rich lithium metal batteries

The growth of lithium (Li) dendrites and the accumulation of dead Li (i.e., Li metal regions which are electronically disconnected from the current collector) significantly undermine the safety and performance of Li metal batteries. This study employs kilogram-scale atomic layer deposition technology to construct zinc oxide with a preferential (002) crystal orientation, which homogeneously forms on commercial carbon nanotube papers. Our approach emphasizes the importance of achieving a moderate Li adsorption energy and low Li migration energy barriers to suppress Li dendrite growth. In this work, we introduce the concept of "catalytic" effect for dead Li reconversion, as validated through time-of-flight secondary ion mass spectrometry, leading to a Li plating/stripping efficiency of 99.89%. The Ah-level Li metal pouch cells with high-nickel positive electrodes achieve a specific energy of 380 Wh kg -1 (based on the mass of the whole pouch cell) and demonstrate stable cycling under demanding conditions. Analysis of the cycled pouch cells confirms the structural integrity and provides insights into the mechanism of the dead Li "catalytic" conversion.

Shen, Huasen [Jianghan University, Wuhan (China)]↗