Search NASA⌕ Search

SEARCH · Search NASA

Results for “Lunar lander”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1991

RS Landers: Lunar lander

The future of the U.S. space program outlined by President Bush calls for a permanently manned lunar base. A payload delivery system will be required to support the buildup and operation of that lunar base. In response to this goal, RS Landers developed a conceptual design of a self-unloading, unmanned, reusable lunar lander. The lander will deliver a 7000-kg payload, with the same dimensions as a space station logistics module, from low lunar orbit (LLO) to any location on the surface of the Moon.

Source record↗
NASA NTRS1988

Lunar lander conceptual design: Lunar base systems study task 2.2

This study is a first look at the problem of building a lunar lander to support a small lunar surface base. One lander, which can land 25 metric tons, one way, or take a 6 metric ton crew capsule up and down is desired. A series of trade studies are used to narrow the choices and provide some general guidelines. Given a rough baseline, the systems are then reviewed. A conceptual design is then produced. The process was only carried through one iteration. Many more iterations are needed. Assumptions and groundrules are considered.

Source record↗
NASA NTRS2009

Altair Lunar Lander Development Status: Enabling Lunar Exploration

As a critical part of the NASA Constellation Program lunar transportation architecture, the Altair lunar lander will return humans to the moon and enable a sustained program of lunar exploration. The Altair is to deliver up to four crew to the surface of the moon and return them to low lunar orbit at the completion of their mission. Altair will also be used to deliver large cargo elements to the lunar surface, enabling the buildup of an outpost. The Altair Project initialized its design using a "minimum functionality" approach that identified critical functionality required to meet a minimum set of Altair requirements. The Altair team then performed several analysis cycles using risk-informed design to selectively add back components and functionality to increase the vehicle's safety and reliability. The analysis cycle results were captured in a reference Altair design. This design was reviewed at the Constellation Lunar Capabilities Concept Review, a Mission Concept Review, where key driving requirements were confirmed and the Altair Project was given authorization to began Phase A project formulation. A key objective of Phase A is to revisit the Altair vehicle configuration, to better optimize it to complete its broad range of crew and cargo delivery missions. Industry was invited to partner with NASA early in the design to provide their insights regarding Altair configuration and key engineering challenges. NASA intends to continue to seek industry involvement in project formulation activities. This paper will update the international coimmunity on the status of the Altair Project as it addresses the challenges of project formulation, including optinuzing a vehicle configuration based on the work of the NASA Altair Project team, industry inputs and the plans going forward in designing the Altair lunar lander.

Laurini, Kathleen C.↗
NASA NTRS2009

Altair Lunar Lander Development Status: Enabling Human Lunar Exploration

As a critical part of the NASA Constellation Program lunar transportation architecture, the Altair lunar lander will return humans to the moon and enable a sustained program of lunar exploration. The Altair is to deliver up to four crew to the surface of the moon and return them to low lunar orbit at the completion of their mission. Altair will also be used to deliver large cargo elements to the lunar surface, enabling the buildup of an outpost. The Altair Project initialized its design using a minimum functionality approach that identified critical functionality required to meet a minimum set of Altair requirements. The Altair team then performed several analysis cycles using risk-informed design to selectively add back components and functionality to increase the vehicles safety and reliability. The analysis cycle results were captured in a reference Altair design. This design was reviewed at the Constellation Lunar Capabilities Concept Review, a Mission Concept Review, where key driving requirements were confirmed and the Altair Project was given authorization to begin Phase A project formulation. A key objective of Phase A is to revisit the Altair vehicle configuration, to better optimize it to complete its broad range of crew and cargo delivery missions. Industry was invited to partner with NASA early in the design to provide their insights regarding Altair configuration and key engineering challenges. A blended NASA-industry team will continue to refine the lander configuration and mature the vehicle design over the next few years. This paper will update the international community on the status of the Altair Project as it addresses the challenges of project formulation, including optimizing a vehicle configuration based on the work of the NASA Altair Project team, industry inputs and the plans going forward in designing the Altair lunar lander.

Laurini, Kathleen C.↗
NASA NTRS2010

Space-Frame Lunar Lander

The space-frame lunar lander was originally intended to (1) land on rough lunar terrain, (2) deform itself to conform to the terrain so as to be able to remain there in a stable position and orientation, and (3) if required, further deform itself to perform various functions. In principle, the space-frame lunar lander could be used in the same way on Earth, as might be required, for example, to place meteorological sensors or a radio-communication relay station on an otherwise inaccessible mountain peak. the space-frame lunar lander would include a truss-like structure consisting mostly of a tetrahedral mesh of nodes connected by variable-length struts, the lengths of which would be altered in coordination to impart the desired overall size and shape to the structure. Thrusters (that is, small rocket engines), propellant tanks, a control system, and instrumentation would be mounted in and on the structure (see figure). Once it had landed and deformed itself to the terrain through coordinated variations in the lengths of the struts, the structure could be further deformed into another space-frame structure

Curtis, Steven A.↗
NASA NTRS2019

Analysis of Base Heating Environment During Ground Testing of a Lunar Lander Demonstrator

Introduction: This lunar lander demonstrator, known as XL-1T (terrestrial), is a collaborative effort between Masten Space Systems and NASA, under NASA’s Lunar CATALYST (also known as Lunar Cargo Transportation and Landing by Soft Touchdown) initiative; The lunar lander is a reusable terrestrial test bed for Masten’s powered decent landing system, and will be controlled by four throttleable main engines utilizing green hypergolic propellants; One of the concerns for a four-engine vehicle like this demonstrator, is the potential for a severe base-heating environment, caused by the formation of a “fountain jet” during testing. Fountain jet is an unique base flow physics which was discovered during the development of the DC-X vehicle.

Wang, Ten-See↗
NASA NTRS2010

An Approach to Designing Passive Self-Leveling Landing Gear with Application to the Lunar Lander

Once the lunar lander has touched down on the moon problems can occur if the crew module is not level. To mitigate, compliant landing gear provide a solution that would allow the module to be leveled once it has landed on some ground slope. The work presented here uses compliant joints, or flexures, for each leg of the module and optimizes the mechanics of these flexures such that the module can be passively leveled over a range of landing slopes. Preliminary results suggest that for landing on a slope of up to 12 deg the effective slope of the module can be reduced to a maximum of 2.5 deg.

Rippere, Troy B.↗
NASA NTRS2010

An Approach to Designing Passive Self-Leveling Landing Gear with Application to the Lunar Lander

Once the lunar lander has touched down on the moon problems can occur if the crew module is not level. To mitigate, compliant landing gear provide a solution that would allow the module to be leveled once it has landed on some ground slope. The work presented here uses compliant joints, or flexures, for each leg of the module and optimizes the mechanics of these flexures such that the module can be passively leveled over a range of landing slopes. Preliminary results suggest that for landing on a slope of up to 12 deg the effective slope of the module can be reduced to a maximum of 2.5 deg.

Rippere, Troy B.↗
NASA NTRS2019

A Joinable Undercarriage to Maximize Payload (JUMP) Lunar Lander for Cargo Delivery to the Lunar Surface

Currently, NASA has engaged industry to develop a series of small to medium capacity landers with payload capacities of up to 5-9 tons by the mid to late 2020s. This contrasts with the former Constellation program, where the Altair lunar lander was targeting a payload capability of roughly 14-20 tons. Investment in smaller landers may present future challenges in delivering habitat modules larger than lunar lander cabins or small logistics modules to the lunar surface. Additionally, given a projected SLS flight rate of 1-2 launches per year, a lunar surface buildup from small elements seems problematic at best. While commercial launchers provide a supplement to SLS, many of the current and projected launch vehicles deliver less than 20 tons to a Trans-Lunar Injection – even fewer to the lunar surface. However, a possible solution could emerge if the lander itself could be launched in pieces with a buildup in Cislunar space. Thus, launchers with these capacities could contribute to a lunar lander capable of delivering 30 tons or more to the lunar surface. This paper introduces the notional concept of a Joinable Undercarriage to Maximized Payload (JUMP) lander. Key elements of a proposed JUMP lander concept will be discussed, followed by recommendations and forward work.

Human spaceflight↗
NASA NTRSDate not supplied

Directed Illumination of Sunlight Collimated and Observed Beneath a Lunar Lander (DISCOBaLL): Structured Illumination For a Lunar Surface Photogrammetry System

A lighting system has been developed to provide structured illumination allowing photogrammetry to be performed during and after landing on extraterrestrial bodies. The system, known as Directed Illumination of Sunlight Collimated and Observed Beneath a Lunar Lander (DISCOBaLL), provides patterned lighting suitable for two- and multiple-camera photogrammetry, allowing several different measurements to be obtained including pre-landing terrain shape, visualization and localization of the ejecta sheet during landing, and post-landing terrain shape enabling quantitative measurement of plume-induced cratering. The paper explains the methodology of designing the DISCOBaLL, describes multiple prototypes, and shows the performance of these prototypes using actual solar radiation in a laboratory setting.

Lunar Regolith↗
NASA NTRSDate not supplied

Directed Illumination of Sunlight Collimated and Observed Beneath A Lunar Lander (DISCOBaLL): Structured Illumination for a Lunar Surface Photogrammetry System

A lighting system has been developed to provide structured illumination allowing photogrammetry to be performed during and after landing on extraterrestrial bodies. The system, known as Directed Illumination of Sunlight Collimated and Observed Beneath a Lunar Lander (DISCOBaLL), provides patterned lighting suitable for two- and multiple-camera photogrammetry, allowing several different measurements to be obtained including pre-landing terrain shape, visualization and localization of the ejecta sheet during landing, and post-landing terrain shape enabling quantitative measurement of plume-induced cratering. The paper explains the methodology of designing the DISCOBaLL, describes multiple prototypes, and shows the performance of these prototypes using actual solar radiation in a laboratory setting.

Plume-Surface Interaction↗
NASA NTRS1991

Lunar lander ground support system

The design of the Lunar Lander Ground Support System (LLGSS) is examined. The basic design time line is around 2010 to 2030 and is referred to as a second generation system, as lunar bases and equipment would have been present. Present plans for lunar colonization call for a phased return of personnel and materials to the moons's surface. During settlement of lunar bases, the lunar lander is stationary in a very hostile environment and would have to be in a state of readiness for use in case of an emergency. Cargo and personnel would have to be removed from the lander and transported to a safe environment at the lunar base. An integrated system is required to perform these functions. These needs are addressed which center around the design of a lunar lander servicing system. The servicing system could perform several servicing functions to the lander in addition to cargo servicing. The following were considered: (1) reliquify hydrogen boiloff; (2) supply power; and (3) remove or add heat as necessary. The final design incorporates both original designs and existing vehicles and equipment on the surface of the moon at the time considered. The importance of commonality is foremost in the design of any lunar machinery.

Source record↗
NASA NTRS2013

An Evaluation of a High Pressure Regulator for NASA's Robotic Lunar Lander Spacecraft

The Robotic Lunar Lander (RLL) development project office at NASA Marshall Space Flight Center is currently studying several lunar surface science mission concepts. The focus is on spacecraft carrying multiple science instruments and power systems that will allow extended operations on the lunar surface or other air-less bodies in the solar system. Initial trade studies of launch vehicle options indicate the spacecraft will be significantly mass and volume constrained. Because of the investment by the DOD in low mass, highly volume efficient components, NASA has investigated the potential integration of some of these technologies in space science applications. A 10,000 psig helium pressure regulator test activity has been conducted as part of the overall risk reduction testing for the RLL spacecraft. The regulator was subjected to typical NASA acceptance testing to assess the regulator response to the expected RLL mission requirements. The test results show the regulator can supply helium at a stable outlet pressure of 740 psig within a +/- 5% tolerance band and maintain a lock-up pressure less than the +5% above nominal outlet pressure for all tests conducted. Numerous leak tests demonstrated leakage less than 10-3 standard cubic centimeters per second (SCCS) for the internal seat leakage at lock-up and less than 10-5 SCCS for external leakage through the regulator body. The successful test has shown the potential for 10,000 psig helium systems in NASA spacecraft and has reduced risk associated with hardware availability and hardware ability to meet RLL mission requirements.

Burnside, Christopher G.↗
NASA NTRS1991

Project UM-HAUL: A self-unloading reusable lunar lander

The establishment of a lunar base is technologically and financially challenging. Given the necessary resources and political support, it can be done. In addition to the geopolitical obstacles, however, there are logistical problems involved in establishing such bases that can only be overcome with the acquisition of a significant transportation and communications network in the Earth-Moon spatial region. Considering the significant number of payloads that will be required in this process, the mass-specific cost of launching these payloads, and the added risk and cost of human presence in space, it is clearly desirable to automate major parts of such an operation. One very costly and time-consuming factor in this picture is the delivery of payloads to the Moon. Foreseeable payloads would include atmospheric modules, inflatable habitat kits, energy and oxygen plant elements, ground vehicles, laboratory modules, crew supplies, etc. The duration of high-risk human presence on the Moon could be greatly reduced if all such payloads were delivered to the prospective base site in advance of crew arrival. In this view, the idea of a 'Self-Unloading Reusable Lunar Lander' (SURLL) arises naturally. The general scenario depicts the lander being brought to low lunar orbit (LLO) from Earth atop a generic Orbital Transfer Vehicle (OTV). From LLO, the lander shuttles payloads down to the lunar surface, where, by means of some resident, detachable unloading device, it deploys the payloads and returns to orbit. The general goal is for the system to perform with maximum payload capability, automation, and reliability, while also minimizing environmental hazards, servicing needs, and mission costs. Our response to this demand is UM-HAUL, or the UnManned Heavy pAyload Unloader and Lander. The complete study includes a system description, along with a preliminary cost analysis and a design status assessment.

Source record↗
NASA NTRS2009

MSFC Robotic Lunar Lander Testbed and Current Status of the International Lunar Network (ILN) Anchor Nodes Mission

The lunar lander robotic exploration testbed at Marshall Spaceflight Center provides a test environment for robotic lander test articles, components and algorithms to reduce the risk on the airless body designs during lunar landing. Also included is a chart comparing the two different types of Anchor nodes for the International Lunar Network (ILN): Solar/Battery and the Advanced Stirling Radioisotope generator (ARSG.)

Cohen, Barbara↗
NASA NTRS2020

Optical Characterization of Laser Retroreflector Arrays for Lunar Landers

Laser Retroreflector Array for Lunar Landers (LRALL) is a small optical instrument designed to provide a target for precision laser ranging from a spacecraft in lunar orbit, enabling geolocation of the lander and its instrument suite and establishing a fiducial maker on the lunar surface. Here we describe the optical performance of LRALL at visible and near-infrared wavelengths. Individual corner cube reflectors (CCRs) within LRALL were tested for surface flatness and dihedral angle values. We also imaged the far-field diffraction patterns of individual CCRs as well as the entire retroreflector array over the range of possible incident angles to extract the optical cross section as a function of viewing angle. We also measured the optical properties of one of the CCRs over the lunar temperature range (100 K to 380 K) and found no significant temperature-dependent variance. The test results show LRALL meets the design criteria and can be ranged to from elevation angles above 30° with respect to the instrument base from an orbital laser altimeter such as the Lunar Orbiter Laser Altimeter (LOLA) on the Lunar Reconnaissance Orbiter (LRO). This work summarizes the test data and serves as a guide for future laser ranging to these retroreflector arrays.

Daniel R Cremons↗
NASA NTRS2019

After LM: NASA Lunar Lander Concepts Beyond Apollo

As this document is being compiled in 2019, NASA is once again planning a return to the Moon, and new lunar lander designs are being generated. Compared to Apollo, crews are projected to be larger (at least four per mission) and stay times longer (beginning at 6.5 days). However, it is expected that the landers will look much like the designs in this document because, as stated in the introduction, lunar lander design is a response to the simple physics that governs the tasks they are asked to perform. Design is also a living thing. New crewed lander designs will continue to emerge up until the point that humans return to the Moon, and even beyond. New players from different countries and commercial providers will create new designs based on new technologies and new requirements. Until some breakthrough technology or new physics principle is created, each lander will respond to the current physics of lunar landing. There may come a time, generations from now, when future engineers are paging through a digital copy of this catalog and reflecting on the early work of lunar lander designers. “Those Apollo guys were really smart, given that they started with nothing as a reference. The Lunar Module – now THAT was a great lunar lander design.”

Altair spacecraft↗
NASA NTRS1992

Lunar lander stage requirements based on the Civil Needs Data Base

This paper examines the lunar lander stages that will be necessary for the future exploration and development of the Moon. Lunar lander stage sizing is discussed based on the projected lunar payloads listed in the Civil Needs Data Base. Factors that will influence the lander stage design are identified and discussed. Some of these factors are (1) lunar orbiting and lunar surface lander bases; (2) implications of direct landing trajectories and landing from a parking orbit; (3) implications of landing site and parking orbit; (4) implications of landing site and parking orbit selection; (5) the use of expendable and reusable lander stages; and (6) the descent/ascent trajectories. Data relating the lunar lander stage design requirements to each of the above factors and others are presented in parametric form. These data will provide useful design data that will be applicable to future mission model modifications and design studies.

Mulqueen, John A.↗