Search NASA⌕ Search

SEARCH · Search NASA

Results for “MAGNETIC COMPRESSION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2016

Practicality of magnetic compression for plasma density control

Here, plasma densification through magnetic compression has been suggested for time-resolved control of the wave properties in plasma-based accelerators [P. F. Schmit and N. J. Fisch, Phys. Rev. Lett. 109, 255003 (2012)]. Using particle in cell simulations with real mass ratio, the practicality of large magnetic compression on timescales shorter than the ion gyro-period is investigated. For compression times shorter than the transit time of a compressional Alfven wave across the plasma slab, results show the formation of two counter-propagating shock waves, leading to a highly non-uniform plasma density profile. Furthermore, the plasma slab displays large hydromagnetic like oscillations after the driving field has reached steady state. Peak compression is obtained when the two shocks collide in the mid-plane. At this instant, very large plasma heating is observed, and the plasmaβ is estimated to be about 1. Although these results point out a densification mechanism quite different and more complex than initially envisioned, these features still might be advantageous in particle accelerators.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2016

Radial magnetic compression in the expelled jet of a plasma deflagration accelerator

A spectroscopic study of a pulsed plasma deflagration accelerator is carried out that confirms the existence of a strong compression in the emerging jet at the exit plane of the device. An imaging spectrometer is used to collect broadened Hα emission from a transaxial slice of the emerging jet at high spatial resolution, and the radial plasma density profile is computed from Voigt fits of the Abel inverted emissivity profiles. The plasma temperature, determined via Doppler broadening of impurity line emission, is compared against the temperature predictions of a radial magnetohydrodynamic equilibrium model applied to the measured density profiles. Empirical scaling laws developed for the plasma density, combined with the measured and predicted temperatures, indicate that a radially equilibrated Z-pinch is formed within the expelled plasma jet at the exit plane during the deflagration process.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2023

MHD simulation on magnetic compression of field reversed configurations with NIMROD

Abstract Magnetic compression has long been proposed a promising method for plasma heating in a field reversed configuration (FRC). However, it remains a challenge to fully understand the physical mechanisms underlying the compression process, due to its highly dynamic nature beyond the one-dimensional (1D) adiabatic theory model (Spencer et al 1983 Phys. Fluids 26 1564). In this work, magnetohydrodynamics simulations on the magnetic compression of FRCs using the NIMROD code (Sovinec et al 2004 J. Comput. Phys. 195 355) and their comparisons with the 1D theory have been performed. The effects of the assumptions of the theory on the compression process have been explored, and the detailed profiles of the FRC during compression have been investigated. The pressure evolution agrees with the theoretical prediction under various initial conditions. The axial contraction of the FRC can be affected by the initial density profile and the ramping rate of the compression magnetic field, but the theoretical predictions on the FRC’s length in general and the relation r s = 2 r o in particular hold approximately well during the whole compression process, where r s is the major radius of FRC separatrix and r o is that of the magnetic axis. The evolutions of the density and temperature can be affected significantly by the initial equilibrium profile and the ramping rate of the compression magnetic field. During the compression, the major radius of the FRC is another parameter that is susceptible to the ramping rate of the compression field. Basically, for the same magnetic compression ratio, the peak density is higher and the FRC’s radius r s is smaller than the theoretical predictions.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

Invariant regimes of Spencer scaling law for magnetic compression of rotating FRC plasma

Abstract The scaling laws for the magnetic compression of a toroidally rotating field reversed configuration (FRC) have been investigated in this work. The magnetohydrodynamics (MHD) simulations of the magnetic compression on rotating FRCs employing the NIMROD code (Sovinec et al 2004 J. Comput. Phys. 195 355), are compared with the Spencer’s one-dimensional (1D) theory (Spencer et al 1983 Phys. Fluids 26 1564) for a wide range of initial flow speeds and profiles. The toroidal flow can influence the scalings directly through the alteration of the compressional work as also evidenced in the 1D adiabatic model, and indirectly by reshaping the initial equilibrium. However, in comparison to the static initial FRC equilibrium cases, the pressure and the radius scalings remain invariant for the magnetic compression ratio B w 2 / B w 1 up to 6 in presence of the initial equilibrium flow, suggesting a broader applicable regime of the Spencer scaling law for FRC magnetic compression. The invariant scaling has been proven a natural consequence of the conservation of angular momentum of both fluid and magnetic field during the dynamic compression process.

Ma, Yiming↗
DOE OSTI2017

The Origin of Compressible Magnetic Turbulence in the Very Local Interstellar Medium

Voyager 1 observed compressible magnetic turbulence in the very local interstellar medium (VLISM). We show that inner heliosheath (IHS) fast- and slow-mode waves incident on the heliopause (HP) generate VLISM fast-mode waves only that propagate into the VLISM. We suggest that this is the origin of compressible turbulence in the VLISM. We show that fast- and slow-mode waves transmitted across a tangential discontinuity such as the HP are strongly refracted on crossing the HP and subsequently propagate at highly oblique angles to the VLISM magnetic field. Thus, fast-mode waves in the VLISM contribute primarily to the compressible and not the transverse components of the VLISM fluctuating magnetic field variance 〈δ B-hat {sup 2}〉 since 〈δ B-hat {sub fz}{sup 2}〉≠0 and 〈δ B-hat {sub fx,fy}{sup 2}〉≃0. If the fast- and slow-mode waves in the IHS exhibit a Kolmogorov-like k{sup −5/3} power spectral density, as appears to be observed by Voyager 1, then the corresponding transmitted spectral density in the VLISM forms an amplified k{sup −5/3} power law. Consequently, the HP “radiates” fast-mode fluctuations into the VLISM, and the heliosphere therefore mediates the character of turbulence in the VLISM. In particular, we predict the form of the VLISM magnetic turbulence power spectral density to be a superposition of the background pristine interstellar turbulence spectrum and the fast-mode spectrum generated by the interaction of fast- and slow-mode IHS waves with the HP, i.e., a power law with an enhanced feature or “bump” corresponding to the contribution by fast-mode turbulence radiated by the HP. We note the applicability of these results to the generation of compressible turbulence in the local interstellar medium surrounding the asterospheres of stars.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2023

Quasi-static magnetic compression of field-reversed configuration plasma: amended scalings and limits from two-dimensional MHD equilibrium

In this work, several key scaling laws of the quasi-static magnetic compression of field reversed configuration (FRC) plasma (Spencer et al 1983 Phys. Fluids 26 1564) are amended from a series of two-dimensional FRC MHD equilibriums numerically obtained using the Grad–Shafranov equation solver NIMEQ. Based on the new scaling for the elongation and the magnetic fields at the separatrix and the wall, the empirically stable limits for the compression ratio, the fusion gain, and the neutron yield are evaluated, which may serve as a more accurate estimate for the upper ceiling of performance from the magnetic compression of FRC plasma as a potential fusion energy as well as neutron source devices.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2018

Anisotropy-driven collisional separation of impurities in magnetized compressing and expanding cylindrical plasmas

When a cylindrically-symmetric magnetized plasma compresses or expands, velocity-space anisotropy is naturally generated as a result of the different adiabatic conservation laws parallel and perpendicular to the magnetic field. When the compression timescale is comparable to the collision timescale, and both are much longer than the gyroperiod, this pressure anisotropy can become significant. We show that this naturallygenerated anisotropy can dramatically affect the transport of impurities in the compressing plasma, even in the absence of scalar temperature or density gradients, by modifying the azimuthal frictions that give rise to radial particle transport. Although the impurity transport direction depends only on the sign of the pressure anisotropy, the anisotropy itself depends on the pitch magnitude of the magnetic field and the sign of the radial velocity. Thus, pressure anisotropy effects can drive impurities either towards or away from the plasma core. These anisotropy-dependent terms represent a qualitatively new effect, influencing transport particularly in the sparse edge regions of dynamically-compressing screw pinch plasmas. Such plasmas are used for both X-ray generation and magneto-inertial fusion, applications which are sensitive to impurity concentrations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Magnetic compressibility of layered ferromagnet under pressure

This study systematically investigates the magnetic properties of the layered ferromagnet MnPt 5 As under pressure through a combination of experimental measurements and theoretical simulations. MnPt 5 As exhibits a ferromagnetic transition at approximately 301 K. Neutron diffraction measurements under applied pressures up to ∼4.9 GPa were performed over a temperature range from 320 to 100 K to probe its magnetic behavior. The results confirm that the Mn atoms maintain a ferromagnetic order under applied pressures, consistent with the ambient-pressure findings. However, magnetic anisotropy is notably suppressed. To further elucidate the compressibility of magnetic anisotropy in MnPt 5 As, x-ray diffraction under pressure was conducted. The results reveal that the c-axis undergoes a greater and more rapid compression compared to the ab -plane, which may contribute to the observed suppression of Mn ferromagnetic ordering along the c -axis. Additionally, theoretical calculations indicate that magnetic ordering exhibits a similar pressure-induced trend under applied pressure, supporting the experimental observations. These findings offer insights into the pressure-dependent magnetic properties and anisotropy of MnPt 5 As, with potential implications for strain engineering in Mn-based magnetic devices.

Electronic band structure↗
DOE OSTI2023

Anisotropic Energy Transfer and Conversion in Magnetized Compressible Turbulence

We present a spatial filtering (or coarse-graining) analysis on 3D magnetized magnetohydrodynamic (MHD) turbulence simulations. The filtered compressible MHD formulae show transfer of kinetic and magnetic energies from large to small scales, as well as energy conversion between kinetic, magnetic, and thermal energies. The anisotropic filtering enables separate analyses of the energy flows perpendicular and parallel to the global mean magnetic field. Anisotropy in energy cascade is demonstrated by the larger perpendicular energy cascade rate and also the larger perpendicular wavenumbers associated with the peak energy transfer rate. We also find that the “inertial range” along the parallel (perpendicular) direction in the anisotropic energy cascade formulation is no longer strictly dissipation-free, because it includes the dissipation in the perpendicular (parallel) direction. A change in the driving force (kinetic only versus kinetic and magnetic) affects the energy conversion between kinetic and magnetic energies. While the compressibility of the driving force changes the partition of different channels of energy transfer and conversion, and also increases the total energy transfer rate, the global energy flow remains unaffected by compressibility qualitatively. Our analysis can be applied to multispacecraft observations of turbulence in the solar wind or a planetary magnetosphere.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2018

Application of compressed magnetic fields to the ignition and thermonuclear burn of inertial confinement fusion targets

Application of axial seed magnetic fields in the range 20-100 T that compress to greater than 10,000 T (100 MG) under typical NIF implosion conditions may significantly relax the conditions required for ignition and propagating burn in NIF ignition targets that are degraded by hydrodynamic instabilities. Such magnetic fields can: (a) permit the recovery of ignition, or at least significant alpha particle heating, in submarginal NIF targets that would otherwise fail because of adverse hydrodynamic instability growth, (b) permit the attainment of ignition in conventional cryogenic layered solid-DT targets redesigned to operate under reduced drive conditions, (c) permit the attainment of volumetric ignition in simpler, room-temperature single-shell DT gas capsules, and (d) ameliorate adverse hohlraum plasma conditions during laser drive and capsule compression. In general, an applied magnetic field should always improve the ignition condition for any NIF ignition target design.

47 OTHER INSTRUMENTATION↗
DOE OSTI2016

Probing off-Hugoniot states in Ta, Cu, and Al to 1000 GPa compression with magnetically driven liner implosions

We report on a new technique for obtaining off-Hugoniot pressure vs. density data for solid metals compressed to extreme pressure by a magnetically driven liner implosion on the Z-machine (Z) at Sandia National Laboratories. In our experiments, the liner comprises inner and outer metal tubes. The inner tube is composed of a sample material (e.g., Ta and Cu) whose compressed state is to be inferred. The outer tube is composed of Al and serves as the current carrying cathode. Another aluminum liner at much larger radius serves as the anode. A shaped current pulse quasi-isentropically compresses the sample as it implodes. The iterative method used to infer pressure vs. density requires two velocity measurements. Photonic Doppler velocimetry probes measure the implosion velocity of the free (inner) surface of the sample material and the explosion velocity of the anode free (outer) surface. These two velocities are used in conjunction with magnetohydrodynamic simulation and mathematical optimization to obtain the current driving the liner implosion, and to infer pressure and density in the sample through maximum compression. This new equation of state calibration technique is illustrated using a simulated experiment with a Cu sample. Monte Carlo uncertainty quantification of synthetic data establishes convergence criteria for experiments. Results are presented from experiments with Al/Ta, Al/Cu, and Al liners. Symmetric liner implosion with quasi-isentropic compression to peak pressure ∼1000 GPa is achieved in all cases. These experiments exhibit unexpectedly softer behavior above 200 GPa, which we conjecture is related to differences in the actual and modeled properties of aluminum.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2017

Gas Gun-Configured Magnetic Flux Compression Generator, NLV-013-17, Year 1 of 3

Presentation on project to explore the concept of achieving current amplification by principles of high-explosive magnetic compression generation but without high explosives and demonstrate that a gas gun or launcher could be configured to provide the input energy and action necessary for magnetic compression generation performance in a more controlled, cost-effective manner with improved safety.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2019

Laboratory investigation of particle acceleration and magnetic field compression in collisionless colliding fast plasma flows

In many natural phenomena in space (cosmic-rays, fast winds), non-thermal ion populations are produced, with wave-particle interactions in self-induced electromagnetic turbulence being suspected to be mediators. However, the processes by which the electromagnetic energy is bestowed upon the particles is debated, and in some cases requires field compression. Here we show that laboratory experiments using high-power lasers and external strong magnetic field can be used to infer magnetic field compression in the interpenetration of two collisionless, high-velocity (0.01–0.1c) quasi-neutral plasma flows. This is evidenced through observed plasma stagnation at the flows collision point, which Particle-in-Cell (PIC) simulations suggest to be the signature of magnetic field compression into a thin layer, followed by its dislocation into magnetic vortices. Acceleration of protons from the plasma collision is observed as well. As a possible scenario, with 1D and 2D PIC simulations we consider a compression of the vortices against dense plasma remnants.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2015

Implementing and diagnosing magnetic flux compression on the Z pulsed power accelerator

We report on the progress made to date for a Laboratory Directed Research and Development (LDRD) project aimed at diagnosing magnetic flux compression on the Z pulsed-power accelerator (0-20 MA in 100 ns). Each experiment consisted of an initially solid Be or Al liner (cylindrical tube), which was imploded using the Z accelerator's drive current (0-20 MA in 100 ns). The imploding liner compresses a 10-T axial seed field, B z ( 0 ) , supplied by an independently driven Helmholtz coil pair. Assuming perfect flux conservation, the axial field amplification should be well described by B z ( t ) = B z ( 0 ) x [ R ( 0 ) / R ( t )] 2 , where R is the liner's inner surface radius. With perfect flux conservation, B z ( t ) and dB z / dt values exceeding 10 4 T and 10 12 T/s, respectively, are expected. These large values, the diminishing liner volume, and the harsh environment on Z, make it particularly challenging to measure these fields. We report on our latest efforts to do so using three primary techniques: (1) micro B-dot probes to measure the fringe fields associated with flux compression, (2) streaked visible Zeeman absorption spectroscopy, and (3) fiber-based Faraday rotation. We also mention two new techniques that make use of the neutron diagnostics suite on Z. These techniques were not developed under this LDRD, but they could influence how we prioritize our efforts to diagnose magnetic flux compression on Z in the future. The first technique is based on the yield ratio of secondary DT to primary DD reactions. The second technique makes use of the secondary DT neutron time-of-flight energy spectra. Both of these techniques have been used successfully to infer the degree of magnetization at stagnation in fully integrated Magnetized Liner Inertial Fusion (MagLIF) experiments on Z [P. F. Schmit et al. , Phys. Rev. Lett. 113 , 155004 (2014); P. F. Knapp et al. , Phys. Plasmas, 22 , 056312 (2015)]. Finally, we present some recent developments for designing and fabricating novel micro B-dot probes to measure B z ( t ) inside of an imploding liner. In one approach, the micro B-dot loops were fabricated on a printed circuit board (PCB). The PCB was then soldered to off-the-shelf 0.020- inch-diameter semi-rigid coaxial cables, which were terminated with standard SMA connectors. These probes were recently tested using the COBRA pulsed power generator (0-1 MA in 100 ns) at Cornell University. In another approach, we are planning to use new multi-material 3D printing capabilities to fabricate novel micro B-dot packages. In the near future, we plan to 3D print these probes and then test them on the COBRA generator. With successful operation demonstrated at 1-MA, we will then make plans to use these probes on a 20-MA Z experiment.

47 OTHER INSTRUMENTATION↗