Fabrication of an ultra-fine Cb-Cu composite by drawing.
Mechanical deformation used in fabrication of composite made of continuous columbium wires in copper matrix by drawing, noting optical inspection
COPPER↗
SEARCH · Search NASA
Results for “MECHANICAL DRAWING”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Modeling of a Stewart Platform for Analyzing One Directional Dynamics for Spacecraft Docking Operations
A one-directional dynamic model of a Stewart Platform was developed to assist NASA in analyzing the dynamic response in spacecraft docking operations. A simplified mechanical drawing was created, capturing the physical structure's main features. A simplified schematic diagram was developed in a lumped mass model from the mechanical drawing. Three differential equations were derived according to the schematic diagram. A Simulink diagram was created using MATLAB to represent the three equations. System parameters, including spring constants and masses, are derived in detail from the physical system. The model can be used for further analysis via computer simulation in predicting dynamic response in its main docking direction, i.e., up-and-down motion.
Stewart Platform↗
<spider assembly design and fabrication< final report
Mechanical drawing of welding procedure for spider assembly - design and fabrication requirements
MECHANICAL DRAWING↗
Universal stowage module for future space exploration
The development, design, and fabrication of a prototype storage module, with internal restraints, for the stowage of items that are normally launched to support a space mission are discussed. The primary design criteria was that the storage module be universal in accomodating most sizes and shapes of items that could be launched and returned in a shuttle payload. Mechanical drawings of various types of storage modules are provided.
Seccamp, V. A.↗
Multiple IMU system hardware interface design, volume 2
The design of each system component is described. Emphasis is placed on functional requirements unique in this system, including data bus communication, data bus transmitters and receivers, and ternary-to-binary torquing decision logic. Mechanization drawings are presented.
Landey, M.↗
Solid state television camera
The design, fabrication, and tests of a solid state television camera using a new charge-coupled imaging device are reported. An RCA charge-coupled device arranged in a 512 by 320 format and directly compatible with EIA format standards was the sensor selected. This is a three-phase, sealed surface-channel array that has 163,840 sensor elements, which employs a vertical frame transfer system for image readout. Included are test results of the complete camera system, circuit description and changes to such circuits as a result of integration and test, maintenance and operation section, recommendations to improve the camera system, and a complete set of electrical and mechanical drawing sketches.
Source record↗
The sodium and hydrogen gas clouds of Io
Models are developed to describe the spatial distribution of gases emitted by Io and are applied to recent observations which indicate extensive gas clouds of hydrogen and sodium in orbit around Jupiter. Hydrogen and sodium atoms are emitted from Io with velocities in the range from 2 to 3 km/sec, with fluxes of about 10 billion and 100 million per sq cm/sec for hydrogen and sodium, respectively. Hydrogen atoms may be formed by photodecomposition of gases such as NH3 or H2S released from the satellite surface and may escape thermally from an exosphere whose temperature is about 500 K. Sodium may be ejected from the surface by energetic particles or by ultraviolet radiation, and it appears that a nonthermal mechanism drawing energy from Jupiter's magnetic field is required in order to account for its release to space.
Smyth, W. H.↗
X-band slotted array test panel and test fixture
Data from the development of the X-band slotted array test band, X-band array test fixture, and the X/L-band test fixture for the Support Instrumentation Requirements program are documented. An X-band array was built and installed with an existing L-band module in such a way as to permit antenna pattern measurements in a series of nonplanar configurations that might simulate the thermal effects of nonuniform solar illumination on the array in a space environment. This was accomplished with eight X-band subpanels mounted adjacently on individually adjusted supports which were then co-mounted to a larger frame which served to mount and physically distort the existing L-band module. The L-band module is a heavy electrical breadboard array section that was fabricated to demonstrate the performance capabilities of a slotted waveguide array at L-band frequencies. Drawings, mechanical analysis, and descriptions of test configurations are presented.
Source record↗
Solar Heating in an Elementary School
Solar-heating and hot-water system installed in elementary school in Virginia is described in 154 page report. Report contains discussion of design philosophy and acceptance-test report. Provides instructions for installation, maintenance, and operation. Also furnishes mechanical drawings and manufacturers' data on pumps, valves, controllers, and other components.
Source record↗
Analysis of the DFP/AFCS Systems for Compensating Gravity Distortions on the 70-Meter Antenna
This paper presents the theoretical computations showing the expected performances for both systems. The basic analysis tool is a Physical Optics reflector analysis code that was ported to a parallel computer for faster execution times. There are several steps involved in computing the RF performance of the various systems. 1 . A model of the RF distortions of the main reflector is required. This model is based upon measured holography maps of the 70-meter antenna obtained at 3 elevation angles. The holography maps are then processed (using an appropriate gravity mechanical model of the dish) to provide surface distortion maps at all elevation angles. 2. From the surface distortion maps, ray optics is used to determine the theoretical shape of the DFP that will exactly phase compensate the distortions. 3. From the theoretical shape and a NASTRAN mechanical model of the plate, the actuator positions that generate a surface that provides the best RMS fit to the theoretical model are selected. Using the actuator positions and the NASTRAN model provides an accurate description of the actual mirror shape. 4. Starting from the mechanical drawings of the feed, a computed RF feed pattern is generated. This pattern is expanded into a set of spherical wave modes so that a complete near field analysis of the reflector system can be obtained. 5. For the array feed, the excitation coefficients that provide the maximum gain are computed using a phase conjugate technique. The basic experimental geometry consisted of a dual shaped 70-meter antenna system; a refocusing ellipse, a DFP and an array feed system. To provide physical insight to the systems performance, focal plane field plots are presented at several elevations. Curves of predicted performance are shown for the DFP system, monopulse tracking system, AFCS and combined DFP/AFCS system. The calculated results show that the combined DFP/AFCS system is capable of recovering the majority of the gain lost due to gravity distortion.
Imbriale, William A.↗
TPSAS-NF1676L-34417-DND
A boron nitride nanotube (BNNT), an electrically-insulating counterpart of a carbon nanotube (CNT), is a great nanofiller candidate for ferroelectric polymeric nanocomposites due to BNNT?s exceptional properties in piezoelectricity, thermal stability, mechanical strength, and radiation shielding capability. Fast and high-yield polar crystallization of polyvinylidene fluoride (PVDF) was accomplished by incorporating BNNTs as a nucleating agent. As-fabricated BNNT-PVDF nanocomposites were characterized by Fourier-transform infrared spectroscopy (FTIR), wide-angle X-ray diffraction (XRD), and differential scanning calorimetry (DSC) to identify and quantify chain conformations. Besides, piezoelectric constants, d33 of BNNT-PVDF nanocomposites were measured and compared with that of a mechanically drawn beta phase polar PVDF. The polar transformation due to BNNT incorporation has a great advantage over conventional beta or gamma transformation methods that require (1) mechanical drawing often resulting in defects or (2) high-temperature annealing for an extended time. In addition to the fast polar crystallization, BNNTs had a role of reinforcement of the polymer matrix. The improved Young?s modulus and electromechanical coupling coefficient of BNNT-PVDF nanocomposites indicated potential applications in energy harvesting under harsh environments such as large deformation, wide temperature cycles, and high radiation.
Dongwon Lee↗
Mechanism of cold drawing in crystalline high polymers.
Cold drawing in crystalline high polymers enables polymer draw ratios to be calculated from crystal plasticity considerations
COLD DRAWING↗
Analogy between fluid cavitation and fracture mechanics
When the stresses imposed on a fluid are sufficiently large, rupture or cavitation can occur. Such conditions can exist in many two-phase flow applications, such as the choked flows, which can occur in seals and bearings. Nonspherical bubbles with large aspect ratios have been observed in fluids under rapid acceleration and high shear fields. These bubbles are geometrically similar to fracture surface patterns (Griffith crack model) existing in solids. Analogies between crack growth in solid and fluid cavitation are proposed and supported by analysis and observation (photographs). Healing phenomena (void condensation), well accepted in fluid mechanics, have been observed in some polymers and hypothesized in solid mechanics. By drawing on the strengths of the theories of solid mechanics and cavitation, a more complete unified theory can be developed.
Hendricks, R. C.↗
High shock FM transmitter
Provisional specifications, photographs, and engineering drawings for high shock FM TRANSMITTER assembly computing device
MECHANICAL DRAWING↗
Configuration study for a 30 GHz monolithic receive array, volume 1
Gregorian, Cassegrain, and single reflector systems were analyzed in configuration studies for communications satellite receive antennas. Parametric design and performance curves were generated. A preliminary design of each reflector/feed system was derived including radiating elements, beam-former network, beamsteering system, and MMIC module architecture. Performance estimates and component requirements were developed for each design. A recommended design was selected for both the scanning beam and the fixed beam case. Detailed design and performance analysis results are presented for the selected Cassegrain configurations. The final design point is characterized in detail and performance measures evaluated in terms of gain, sidelobe level, noise figure, carrier-to-interference ratio, prime power, and beamsteering. The effects of mutual coupling and excitation errors (including phase and amplitude quantization errors) are evaluated. Mechanical assembly drawings are given for the final design point. Thermal design requirements are addressed in the mechanical design.
Nester, W. H.↗
Shock-Absorbing, Retractable Docking Mechanism
Report contains description and drawings of conceptual docking mechanism joining Space Shuttle orbiter with proposed Space Station. New version saves considerable weight. Docking module left on Space Shuttle after assembly, and only docking mechanism carried aboard Space Shuttle.
Kahn, Jon B.↗
Fabrication and evaluation of low fiber content alumina fiber/aluminum composites
The mechanical fabrication of low volume percent fiber, polycrystalline alumina fiber reinforced aluminum composites was accomplished. Wire preform material was prepared by liquid-metal infiltration of alumina fiber bundles. The wires were subsequently encapsulated with aluminum foil and fabricated into bulk composite material by hot-drawing. Extensive mechanical, thermal and chemical testing was conducted on preform and bulk material to develop a process and material data base. In addition, a preliminary investigation of mechanical forming of bulk alumina fiber reinforced aluminum composite material was conducted.
Hack, J. E.↗
Saturn i launch vehicle sa-8 and launch complex 37b functional systems description. volume vi- environmental conditioning systems functional description, index of finding numbers, and mechanical schematics
Saturn I /SA-8/ launch vehicle - environmental control systems, functional description, index of finding numbers, and schematics of launch complex
SATURN I /SA-8/ LAUNCH VEHICLE↗