Expulsion of storable propellants utilizing a volatile liquid as the pressurizing medium.
Volatile liquid pressurization as expulsion method for storable propellants noting in-flight refueling system design parameters
THERMODYNAMIC PROPERTY↗
SEARCH · Search NASA
Results for “MEDIUM PRESSURE”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
High-pressure structural systematics of dysprosium metal compressed in a neon pressure medium to 182 GPa
Here we present an experimental and theoretical study of dysprosium metal compressed in the soft pressure transmitting medium Ne up to 182 and 300 GPa, respectively. Angle-dispersive x-ray powder diffraction data from each of the high-pressure polymorphs shows anisotropic compression behavior indicating changes to the electron density distribution throughout its polymorphic landscape. We compare the monoclinic (mC4) and orthorhombic (oF16) structures for the collapsed structure for Dy above 82 GPa and verify that the oF16 structure offers a better fit to our data than the previously reported mC4 structure. Further, we have found that the oF16 structure undergoes similar anisotropic compression of its lattice parameters, with a turning point above 160 GPa; suggesting a potential phase transition at pressures much higher than achieved in this study. Density functional theory calculations show the likely candidate for this new high-pressure phase is the isosymmetric oF8 structure, which is predicted to be lower in energy than the oF16 structure above 275 GPa.
75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
The stress state in bismuth to 298 GPa and its use as a pressure transmitting medium and pressure marker at multi-megabar pressures
We have conducted diffraction studies of bismuth (Bi) to 298 GPa using both conventional and toroidal diamond anvil cells (DACs) to investigate its suitability as a pressure-transmitting medium (PTM) to such pressures. Using microfocused x-ray beams, we have determined the pressure dependence of the uniaxial stress component (t) in cubic Bi-V from 7 to 298 GPa and find that at 298 GPa, t < 0.5 GPa. Bi-V, therefore, cannot support significant shear stresses, making it an excellent PTM. We have also measured the compressibility of Bi-V against that of copper (Cu) and gold (Au), allowing it to be used as a pressure marker as well as a PTM.
75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
Systematic structural study in praseodymium compressed in a neon pressure medium up to 185 GPa
Explore the source record for details and available documents.
36 MATERIALS SCIENCE↗
Novel Medium-Pressure Low-Temperature Plasma Disinfector Final Report
Explore the source record for details and available documents.
70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
Recovery of MOF-5 from Extreme High-Pressure Conditions Facilitated by a Modern Pressure Transmitting Medium
Here mechanisms underlying the mechanically induced amorphization of metal-organic frameworks (MOFs) are of current interest, and both high-pressure experimentation and molecular dynamics simulations have been used to reveal the fundamentals of load bearing, deformation, and pressure-induced amorphization (PIA) in these highly porous materials. Unfortunately, MOFs are typically highly susceptibility to amorphization, which limits the conditions under which they can be processed and used. However, their flexible structures can be stabilized to high pressures by incorporating guest species into the framework matrix. In this study, a large molecule pressure transmitting medium (DAPHNE 7575 ) is used as a structure-fortifying guest species to stabilize the prototypical MOF -5 to ultra-high pressures ( >9 GPa) and enable the recovery of crystalline material upon decompression. Structural changes associated with the penetration of the pressure transmitting medium on compression are examined using a combination of high pressure synchrotron powder diffraction and molecular dynamics simulations. This work enhances the understanding of PIA in MOFs while showcasing a potential route for the stabilization of MOFs to surprisingly high-pressures.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Refined room-temperature equation of state of Bi up to 260 GPa
At room temperature, bismuth undergoes several structural transitions with increasing pressure before taking on a body-centered cubic (bcc) phase at approximately 8 GPa. The bcc structure is stable to the highest measured pressure and its simplicity, along with its high compressibility and atomic number, makes it an enticing choice as a pressure calibrant. Here, we present three data sets on the compression of bismuth in a diamond anvil cell in a neon pressure medium, up to a maximum pressure of about 260 GPa. The use of a soft pressure medium reduces deviatoric stress when compared to previous work. With an expanded pressure range, a higher point density, and a decreased uniaxial stress component, we are able to provide more reliable equation of state parameters. We also conduct density functional theory electronic-structure calculations that confirm that the bcc phase is energetically favored at high pressure.
75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
Multi-Point Combustion System: Final Report
A low-NOx emission combustor concept has been developed for NASA's Environmentally Responsible Aircraft (ERA) program to meet N+2 emissions goals for a 70,000 lb thrust engine application. These goals include 75 percent reduction of LTO NOx from CAEP6 standards without increasing CO, UHC, or smoke from that of current state of the art. An additional key factor in this work is to improve lean combustion stability over that of previous work performed on similar technology in the early 2000s. The purpose of this paper is to present the final report for the NASA contract. This work included the design, analysis, and test of a multi-point combustion system. All design work was based on the results of Computational Fluid Dynamics modeling with the end results tested on a medium pressure combustion rig at the UC and a medium pressure combustion rig at GRC. The theories behind the designs, results of analysis, and experimental test data will be discussed in this report. The combustion system consists of five radially staged rows of injectors, where ten small scale injectors are used in place of a single traditional nozzle. Major accomplishments of the current work include the design of a Multipoint Lean Direct Injection (MLDI) array and associated air blast and pilot fuel injectors, which is expected to meet or exceed the goal of a 75 percent reduction in LTO NOx from CAEP6 standards. This design incorporates a reduced number of injectors over previous multipoint designs, simplified and lightweight components, and a very compact combustor section. Additional outcomes of the program are validation that the design of these combustion systems can be aided by the use of Computational Fluid Dynamics to predict and reduce emissions. Furthermore, the staging of fuel through the individually controlled radially staged injector rows successfully demonstrated improved low power operability as well as improvements in emissions over previous multipoint designs. Additional comparison between Jet- A fuel and a hydrotreated biofuel is made to determine viability of the technology for use with alternative fuels. Finally, the operability of the array and associated nozzles proved to be very stable without requiring additional active or passive control systems. A number of publications have been publish
Goeke, Jerry↗
The Effect of Clearance Distribution on the Performance of a Compression-ignition Engine with a Precombustion Chamber
The clearance distribution in a precombustion chamber cylinder head was varied so that for a constant compression ratio of 13.5 the spherical auxiliary chambers contained 20, 35, 50, and 70 per cent of the total clearance volume. Each chamber was connected to the cylinder by a single circular passage, flared at both ends, and of a cross-sectional area proportional to the chamber volume, thereby giving the same calculated air-flow velocity through each passage. Results of engine-performance tests are presented with variations of power, fuel consumption, explosion pressure, rate of pressure rise, ignition lag, heat loss to the cooling water, and motoring characteristics. For good performance the minimum auxiliary chamber volume, with the cylinder head design used, was 35 per cent of the total clearance volume; for larger volumes the performance improves but slightly. With the auxiliary chamber that contained 35 percent of the clearance volume there were obtained the lowest explosion pressures, medium rates of pressure rise, and slightly less than the maximum power. For all clearance distributions an increase in engine speed decreased the ignition lag in seconds and increased the rate of pressure rise.
Moore, C. S.↗
Multidimensional Modeling of Mixture Formation in a Hydrogen-Fueled Heavy-Duty Optical Engine With Direct Injection
Hydrogen (H 2 ), as a carbon-free fuel, is considered as one of the most promising solutions to reduce the carbon footprint of hard-to-decarbonize energy and transportation sectors. As such, hydrogen-fueled internal combustion engines (H 2 ICEs) have recently been receiving increasing attention, particularly in applications such as on-road/off-road heavy-duty transport and combined heat and power. The direct injection (DI) of gaseous hydrogen into the combustion chamber offers great potential for achieving high power density and high engine efficiency, while mitigating the risk of backfire and reducing pre-ignition. However, the numerical simulation of H 2 DI system remains a formidable challenge associated with the high computational cost of reproducing compressible supersonic flow and shocks in narrow injector passages and in near-nozzle regions. In general, there is a lack of well-established and validated practices for the modeling of high-pressure H 2 DI in large-bore engines. Here, to this end, this study focuses on computational fluid dynamics (CFD) modeling of the mixture formation process in a heavy-duty optical engine employing a medium-pressure H 2 DI system. Both large eddy simulations (LES) and Reynolds Averaged Navier–Stokes (RANS) simulations are performed and evaluated against optical data. Gaseous hydrogen is injected into the combustion chamber via a centrally located outward opening hollow-cone injector at a pressure of 40 bar. Simulations are carried out for two injection timings, namely, −120 and −60 °CA. The numerical predictions for H 2 distribution in different horizontal and vertical planes during the compression stroke are systematically compared against optical data obtained through planar laser-induced fluorescence (PLIF) measurements. Overall, the LES approach using the Dynamic Structure model is found to have good predictive capabilities for the early jet penetration in terms of length and shape, as well as the later H 2 distributions. However, the unsteady RANS approach with the renormalization group $k - ϵ$ model, which is widely used by industry to model heavy-duty ICEs, significantly underpredicts the H 2 mixing, even at similar mesh resolution to that used in LES. These results indicate that there is a need for the improvement of mixing submodels within the RANS approach when applied to H 2 DI simulations.
LES↗
The Production of Jets From Magnetized Accretion Disks: Simulation of the Blandford-Payne Mechanism
We have used massively parallel supercomputer simulations to perform an extensive study of a plausible mechanism for producing the jets seen in extragalactic radio sources - acceleration and collimation by coronal magnetic fields in an accretion disk orbiting a central black hole. We find that such disks can propel jets for a wide range of coronal conditions. The terminal jet velocity is a strong function of the magnetic field equatorial component. Acceleration and collimation are produced by a tight azimuthal field coil generated in the corona, rather than by a stiff poloidal field extending to large distances. The jets are pressure-confined when the external medium pressure is high, but magnetically- confined when it is low.
Blandford-Payne Mechanism↗
Thermal Pressure in the Thermal Equation of State for Solid and a Proposed Substitute
Abstract The thermal equation of state (TEOS) for solids is a mathematic model among pressure, temperature and density, and is essential for geophysical, geochemical, and other high pressure–temperature (high P–T) researches. However, in the last few decades, there has been a growing concern about the accuracy of the pressure scales of the calibrants, and efforts have been made to improve it by either introducing a reference standard or building new thermal pressure models. The existing thermal equation of state, P ( V , T ) = P ( V , T 0 ) + P th ( V , T ), consists of an isothermal compression and an isochoric heating, while the thermal pressure is the pressure change in the isochoric heating. In this paper, we demonstrate that, for solids in a soft pressure medium in a diamond anvil cell, the thermal pressure can neither be determined from a single heating process, nor from the thermal pressure of its calibrant. To avoid the thermal pressure, we propose to replace the thermal pressure with a well-known thermal expansion model, and integrate it with the isothermal compression model to yields a Birch–Murnaghan-expansion TEOS model, called VPT TEOS. The predicted pressure of MgO and Au at ambient pressure from Birch–Murnaghan-expansion VPT TEOS model matches the experimental pressure of zero (0) GPa very well, while the pressure prediction from the approximated Anderson PVT TEOS exhibit a big deviation and a wrong trend.
75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
Melt Redistribution in Dynamic Systems: Applications to Core Formation
Samples of olivine + Fe-S were fabricated by hot-pressing a mechanical mixture of the two phases. Olivine powders with a starting grain size of approx. 10 microns were prepared by crushing crystals of San Carlos olivine followed by pulverization in a fluid energy mill. Iron sulfide powder with a particle size of approx. 5 microns was prepared from a 2:1 mixture of reagent grade iron sulfide (FeS) plus iron. Rods 20 mm in length by 10 mm in diameter were cold-pressed into iron capsules with a uniaxial stress of approx. 200 MPa. These rods were then hot-pressed at 1523 K and 300 MPa for 4 h to obtain a starting material with <2% porosity. Samples for shear experiments were cut perpendicular to the long axis of these rods. The discs were shaped into ellipses approx. 6 mm by approx. 8 mm with a thickness ranging from 0.6 to 1.0 mm. An iron foil strain marker was inserted into a cut made along the minor axis. The sample was placed between two thoriated tungsten pistons cut at 45 deg to the long axis and then placed into an iron sleeve capped by alumina discs. The sample was then sheared in a gas pressure-medium apparatus at a temperature of 1523 K and a confining pressure of 300 MPa.
Hustoft, J. W.↗
Solution and shock-induced exsolution of argon in vitreous carbon
To add to the knowledge of noble gas solution and exsolution in carbonaceus material, experiments were performed on vitreous carbon. Ar-rich vitreous carbon samples were prepared under vapor-saturated conditions using argon as the pressurizing medium. Solubility data were obtained for temperatures of 773 to 973 K and pressures of 250 to 1500 bars. Up to 7 wt pct Ar was dissolved in the carbon. The solubility data were compared to a thermodynamic model of argon atoms dissolving into a fixed population of 'holes' in the carbon. Two variations of the model yielded estimates of the enthalpy of solution of Ar in vitreous carbon equal to about -4700 cal/mole. Preliminary shock experiments showed that 28 percent of the total argon was released by driving 4 GPa shocks into the argon-rich carbon. It was demonstrated that shock-induced argon loss is not simply caused by the impact-induced diminution of grain size. The present value of shock pressure required for partial impact devolatilization of Ar from carbon is below the range (5-30 GPa) at which H2O is released from phyllosilicates.
Gazis, Carey↗
Extreme synthesis of crystalline aerogel materials from amorphous aerogel precursors
In one embodiment, a composition of matter includes a crystalline porous structure having a density in a range from about 30 to about 50 mg/cm 3 . In another embodiment, a kit includes an amorphous, porous material, an inert pressure medium, a heating source, and a sample chamber configured to withstand an applied pressure of at least about 20 GPa. Other aspects and embodiments of the present invention will become apparent from the following detailed description, which, when taken in conjunction with the drawings, illustrate by way of example the principles of the invention.
Pauzauskie, Peter J.↗
Simultaneous high-P, high-T X ray diffraction study of beta-(Mg,Fe)2SiO4 to 26 GPa and 900 K
Attention is given to the lattice parameters of beta phase (Mg(0.84)Fe(0.16))2SiO4 determined by X-ray diffraction using synchrotron radiation under simultaneous high-pressure and high-temperature conditions. The experiments were conducted up to a pressure of 26 GPa and a temperature of 900 K. High pressures were generated in a Mao-Bell type diamond anvil cell using neon gas as a pressure medium. The sample was heated with an external Ni80Cr20 wire heater. Gold was used as an internal high-pressure calibrant at high temperature. The experimental data indicated the anisotropic behavior of the beta phase at high pressure and temperature, i.e., the c axis is about 35-percent more expansible and about 25-percent more compressible than the a and b axes. A value of 5.1 +/-0.8 was found for the Anderson-Grueneisen parameter. The derived thermodynamic parameters for the beta phase are summarized.
Fei, Yingwei↗
High-pressure Cr 3+ R-line luminescence of zoisite and kyanite: a probe of octahedral site distortion
Here, the Cr 3+ luminescence spectra of zoisite and kyanite, two geologically important minerals, were studied up to 40 and 20 GPa, respectively, in various pressure media. Cr 3+ substitutes into the octahedral aluminum sites in both minerals and the R-line luminescence is a particularly sensitive site-specific probe of the octahedral Al site. Unlike many previous studies where Cr 3+ luminescence was utilized, both these minerals have multiple highly distorted octahedral sites resulting in very large splitting of their R-lines, ~ 300 cm -1 in zoisite and ~ 360 cm -1 in kyanite (for reference, ruby is 29 cm -1 ). For zoisite, the R-line splitting increases as pressure increases and more than triples from its ambient value by 40 GPa, while the R-line splitting in kyanite from the M1 and M2 sites does not change when compressed in a Ne pressure medium up to 20 GPa. We do not observe evidence of any phase transitions in either zoisite or kyanite across the pressure range of these new luminescence measurements. Furthermore, we present some high-pressure luminescence results where kyanite was known to be bridged between the diamond anvils and show how these spectra illustrate the different effect of uniaxial relative to hydrostatic stress on luminescence spectra.
36 MATERIALS SCIENCE↗
Charge influence on point defect interactions with xenon bubbles in uranium dioxide
The interaction of xenon (Xe) bubbles with small self-defects in uranium dioxide (UO2) has been studied using molecular statics simulations. The results show that the pressure and size of bubbles have a minimal impact on the heterogeneity of the interaction between a charge neutral Xe bubble and charged point defects, while the local charge distribution around the bubble overwhelmingly determines the interaction strength and critical interaction distance. The charge effect on the interactions between Xe bubbles and defects was further confirmed by assessing the point defect interaction energies with negatively or positively charged Xe bubbles. The Xe density, or pressure, has a much smaller effect on the interaction energy between charged bubbles and small defects at least for low and medium pressure bubbles. The interactions between charged Xe bubbles and point defects basically follow the Coulomb electrostatic interaction law, which is independent of the empirical potentials employed for the Xe–UO2 system in this work.
Yang, L. (ORCID:0000000322166071)↗