Search NASA⌕ Search

SEARCH · Search NASA

Results for “MELCOR”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Modeling a Hypothetical Fusion Blanket Design Using MELCOR-TMAP

MELCOR (not an acronym) is a nuclear safety code developed by Sandia National Laboratories for the Nuclear Regulatory Commission. Idaho National Laboratory collaborates with Sandia to maintain and develop a version of MELCOR specifically for fusion device applications. Most recently, the tritium migration analysis program (TMAP) has been incorporated into MELCOR for fusion, in a version called MELCOR-TMAP. We show the results applying MELCOR-TMAP to model steady-state inventory and tritium retention in a liquid immersion blanket design for a hypothetical fusion device under steady-state operation.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

Specification of Radionuclide Classes for MELCOR Molten Salt Reactor Simulations

MELCOR has been used extensively to facilitate virtual investigations into severe nuclear accidents for light-water reactors (LWRs). Non-light water reactors (non-LWRs) render some LWR-centric approaches potentially unsuitable. MELCOR has been instrumental in analyzing source terms for LWRs and has recently expanded its applicability to non-LWRs. To simplify radionuclide (RN) tracking, MELCOR currently groups elements into 17 classes, each containing representative species. This grouping, optimized for LWRs, is not appropriate for non-LWRs due to the different chemistry. This necessitates a reevaluation of radionuclide transport modeling. This report introduces a new class scheme for MELCOR tailored to MSR modeling, expanding the current 17 classes to 32 and are explained in the context of a UF 4 fueled FLiBe carrier MSR. It provides a discussion and justification for the new groupings and outlines a methodology for discovering and defining additional classes in MELCOR using a sample calculated RN inventory and a Gibbs energy minimizer (GEM).

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2024

MELCOR Model of the Molten Salt Tritium Transport Experiment (MSTTE)

This report summarizes the FY24 activities to model the Molten Salt Tritium Transport Experiment (MSTTE) using MELCOR. Summarized are the approaches used in construction of the MELCOR methods used for modeling, the construction of the MELCOR deck and the thermohydraulic calculations. The results show good comparison with previously reported calculation data, providing confidence in MELCOR to model experiments in the future.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2025

PSA 2025 Presentation: "Modeling and Sensitivity Analysis of a Generation IV Pebble Bed Reactor Using MELCOR 2.2"

Accompanying the advancement of reactor technologies is the need for computational modeling and simulation to predict their behavior under normal operating conditions and accident scenarios. New Generation IV reactor designs which employ non-conventional fuel have a particular need for modeling the behavior and release of radionuclides and other material from the fuel. In this work, MELCOR version 2.2, a system-level safety and accident scenario code developed by Sandia National Laboratories, was used to model a 200-MWth pebble bed modular reactor and calculate the inventories of circulating and deposited graphite, metal dust, and elemental components released from the fuel elements. A base case modeling the reactor under standard operating conditions was calculated using MELCOR and the inventories were extrapolated to 30 years of operation time using a logarithmic regression fit. A sensitivity analysis was also performed in which several key parameters for the base case model were modified to explore the effect of these changes on the inventories calculated by MELCOR. A set of transient scenario simulations for a depressurized loss of forced cooling (DLOFC) accident were also performed. The results of the sensitivity analysis and transient simulations are reported and discussed in relation to the modeling techniques used for this study.

22 - GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2025

Uncertainty quantification in MELCOR Safety analysis of ARIES reactor designs

MELCOR-TMAP is a combined thermal-hydraulics and tritium tracking code developed to simulate severe accident scenarios in fission and fusion power plants. Here, we demonstrate the results of MELCOR-TMAP analyses on historical ARIES program reference designs. By coupling MELCOR-TMAP with the open source RAVEN probabilistic risk analysis framework’s Bayesian UQ capabilities, we also demonstrate key uncertainties in material properties with the highest impact on tritium inventory and plant risk.

70 - PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Benchmarking MELCOR's NAC Package to ABCOVE Test AB7

This report presents analyses of the AB7 ABCOVE sodium spray fire experiment with the MELCOR code. This code simulates the progression of accident events for analysis and auditing purposes of nuclear facilities during accident conditions. Historically, the ABCOVE experiments have contributed to the validation of aerosol physics and related phenomena. Given advancements in sodium-cooled reactor designs, characterization of the sodium spray combustion may further the review and validation of newly incorporated sodium properties and physics packages, namely, the sodium equations of state (EOS) and the sodium combustion (NAC) package within MELCOR. Previously, the AB5 and AB6 experiments were analyzed with and without the NAC package. This work builds on the previous analyses with a demonstration of the current code capabilities of MELCOR with a more mild Na spray and pool fire scenario.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2025

Investigating the Role of Accident Tolerant Cladding on Source Term Reduction for High-Burnup PWRs Using MELCOR

The use of accident tolerant fuel (ATF) cladding can increase coping times during and beyond design basis accidents. While such gains may be incremental, they provide a margin that can potentially be recovered to enable high-burnup (HBU) operation. Realizing such a margin requires demonstrating that the combination of HBU and ATF has not led to an overall increase in source term. This study investigates the influence of cladding technology (Zr-based, Cr-coated Zr, and FeCrAl) and fuel cycle length (18 and 24 months) on radiological dose at the boundary of the exclusion zone for a four-loop pressurized water reactor to investigate whether ATF claddings can provide such benefits. We analyze a recovered large break loss-of-coolant accident scenario to investigate the impact of transient timescale on the benefits of such coping time increases. The simulations have been performed using the MELCOR and MELCOR Accident Consequence Code System codes. For the cases analyzed, increased fuel cycle length did not necessarily increase radionuclide release and hydrogen generation, as these were found to be sensitive to the core power distribution. Similarly, off-site dose consequence is dominated by short-lived radionuclides that tend to saturate earlier in the burnup, so higher burnup operation did not necessarily increase the source term for the phenomena and transients analyzed here. Delays in recovery of the lowpressure safety injection system increase hydrogen production and radionuclide release, especially between 780 s and 1620 s, due to the nonlinear oxidation and core degradation behavior. Results show that Cr-coated Zr enhances safety by delaying heatup and gap release. Here, when uncertainty propagation on oxidation properties is considered, FeCrAl exhibits the lowest overall radionuclide release and off-site dose throughout the spectrum. However, while the considered “base model” performance is superior under delayed injection scenarios, upper-bound cases display hydrogen generation risk comparable to the Zr-based cladding.

Accident Tolerant Fuel↗
DOE OSTI2024

Modeling tritium inventory in hypothetical designs using MELCOR-TMAP

MELCOR-TMAP has been used to model tritium inventory in a hypothetical fusion device with a liquid immersion blanket. Parametric studies for steady-state operations due to material property uncertainties and extraction system limitations are shown, along with a flow-diagram of the model and a history of MELCOR-Fusion

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

Blanket Modeling with Tritium Accountancy using MELCOR-Fusion

Fusion devices require a "blanket" of materials that generate tritium during production to provide the source of tritium for the fusion device. We use MELCOR for fusion to demonstrate a blanket model of an ARC-class reactor with a liquid immersion blanket. We discuss major sources of uncertainty and describe ongoing experimental efforts to reduce the uncertainty.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

Modeling with Tritium Accountancy Using MELCOR Fusion

An overview of MELCOR for fusion as a safety analysis tool for presentation to fusion industry members, given as a powerpoint presentation. This is a remix of previously approved and used slides at various conferences.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

MELCOR Deposition Models Applied to Noble Metals

Noble metals are chemically inert elements that form particles that can circulate around the fuel loop of a liquid-fueled molten salt reactor (LF-MSR). Due to their health-hazardous abilities, it is important to track these elements and to understand their contributions to source term during a reaction, particularly for Te as it decays into iodine. This report describes three solid deposition models that were implemented into the MELCOR reactor modeling code. The models that were implemented were Dittus-Boelter for turbulent fluid deposition, Talbot thermophoretic transport equation and Richardson-Zaki gravitational deposition. These closures were used to calculate the mass transfer coefficient and was compared to those reported for the Molten Salt Reactor Experiment (MSRE). The impacts of salt, operation and particle parameters on how they affect solid deposition are described, and found that solid deposition is strongly dependent on salt flow and viscosity, as well as particle diffusion rate and size. The conclusions form the basis for activities to be carried out in FY26 and for pursuit of future activities.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2024

FY24: Progress Report on the MELCOR Modeling of the Liquid Salt Test Loop

This report outlines the activities conducted in FY24 focused on updating the liquid salt test loop (LSTL) model through the integration of a new test section featuring 16 radial tubes coupled to a filter section. Some comparative analyses of the updated model with existing experimental data for the LSTL was made and benchmarked against other computational tools, such as the ORNL code, SAM. These actions are part of a comprehensive validation effort and promote collaboration among laboratories participating in the Molten Salt Reactor (MSR) campaign.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2024

A Road Map to Determine Chemical Phenomenology Required for Molten Salt Reactor Accident Modeling

The differences between molten salt reactors (MSRs) and light water reactors (LWRs) has required modification of previous approaches to model reactor accident progression. Part of this is related to the different chemical phenomenology of these reactors as their fuel is not as contained and can react with their surroundings. MELCOR is a reactor simulation tool that has implemented methods and models to model MSRs. However, additional development of MELCOR for modeling MSRs is required. Although understanding the chemistry surrounding MSRs is important to general MSR licensing and operation, only a subset of reactions and phenomenology are required to model beyond design basis incidents and therefore to be captured by MELCOR. This report is intended to guide the chemical phenomenology to improve MELCOR MSR accident modeling and discusses phenomenology models that are in development.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗