Search NASA⌕ Search

SEARCH · Search NASA

Results for “METAL PLATE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Delayed Critical and Subcritical Experiments with Polyethylene Moderated Unreflected Thin 15 in. Diameter HEU Metal Plates

The thin ~15 in. diameter highly enriched uranium (HEU) metal plates were assembled to delayed criticality at the Oak Ridge Critical Experiments Facility (ORCEF) in 1969 with various thicknesses of polyethylene (varying from 1/16 to 2$\frac{3}{8}$ inches) between uranium metal plates. The average 235 U enrichment was 93.27 wt. %. These unreflected critical configurations contained 4$\frac{2}{3}$ to 20$\frac{5}{6}$ thin 15 in. diameter HEU metal plates (on loan from Los Alamos National Laboratory [LANL] and shipped to Oak Ridge National Laboratory [ORNL] on June 3, 1969). Depending on the thickness of polyethylene, the enriched uranium masses varying from 28,053 to 135,148 grams. Fractional plate sections consisted of the appropriate number of 60° pie sections. In addition to the measurement at delayed criticality, subcritical measurements were also performed by the inverse kinetic rod drop method. Prompt neutron decay constant measurements were also performed by the Rossi alpha and randomly pulsed neutron method using a time-tagged spontaneous fission californium neutron source; these are briefly reported here. At the time of these measurements in 1969, the thin HEU metal plates were in near-pristine condition with extremely little oxidation, allowing better descriptions of the uranium plates than the use of these plates in a heavily oxidized and deteriorated condition in recent reflected benchmark experiments at the LANL facility at the Nevada Test Site with these same thin highly enriched uranium metal plates. This report documents the experimental information for the measurements performed so that later researchers can perform the required uncertainty and calculational analyses and documentation to use these data for an International Nuclear Criticality Safety Benchmark Evaluation Program (ICSBEP) or a Nuclear Energy Agency (NEA) benchmark. Data from the experiments described should be acceptable for use as criticality safety benchmark experiments for the ICSBEP and the NEA nuclear criticality safety benchmark program once the uncertainty analysis on the measured neutron multiplication factors is completed. Additional data—such as the dimensional inspection reports, uranium isotopic information, and other relevant particulars—should be retrieved from the Y-12 Plant or LANL and incorporated in the final ICSBEP benchmark. Based on previous ICSBEP benchmarks with this enriched uranium metal at ORCEF, the uncertainties in $k_{eff}$ could be as low as ± 0.0002 for some configurations. Other experiments with smaller-diameter than 15 in. diameter HEU metal plates have been benchmarked in HEU-METFAST-001. The prompt neutron time decay measurements could be the basis for an International Reactor Physics Benchmark Program. Preparation of the present report is part of an effort at ORNL to document more than 15 undocumented critical and subcritical experiments enumerated in ORNL/TM-2019/18 and performed by ORNL at ORCEF and other US Department of Energy critical experiments facilities using more than 500 operational days of critical facility time. This work for this report publication was supported by the Nuclear Criticality, Radiation Transport and Safety NCSP Program at ORNL.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Understanding ion-selective Li/Na metal plating behavior in hybrid Li-Na battery

This study investigates ion-selective Li/Na metal plating behavior in hybrid Li-Na battery systems, revealing the critical role of electrolyte solvents in these processes. Using a hybrid battery design with a LiFePO 4 cathode, Na metal anode, and NaPF 6 -based electrolytes, we observed contrasting effects of carbonate- and ether-based electrolyte solvents. While ether-based electrolytes showed expected Na plating/stripping, carbonate-based electrolytes surprisingly favored a Li-dominant plating/stripping reaction despite the Na-rich environment. X-ray photoelectron spectroscopy revealed that this selectivity is linked to the composition of the solid electrolyte interphase (SEI) layer, with carbonate electrolytes forming Li-based inorganic-rich SEI layers that facilitate Li-ion diffusion while screening Na ions. In conclusion, these findings challenge the conventional understanding of metal plating in multi-ion environments and offer insights for designing future hybrid battery systems.

25 ENERGY STORAGE↗

Transient Adjustments for Metal-Sheathed Thermocouples on Metal Plates (Shrouds)

This report provides guidance on how to adjust temperature measurements from mineral-insulated, metal-sheathed (MIMS) thermocouples (TCs) mounted on metal plates to correct for slow transient response. This information is needed so that more accurate transient temperature measurements can be made. These more accurate temperature measurements are of benefit for both qualification of hardware and as data sets for model validation. The approach was to use a relatively simple first order adjustment to the MIMS TC reading, as compared to a more accurate metal plate temperature measurement. MIMS TCs are used to improve reliability. Results from four data sets were analyzed to determine the time constraint; an overall average of 5.0 s was obtained.

42 ENGINEERING↗

Pristine or Highly Defective? Understanding the Role of Graphene Structure for Stable Lithium Metal Plating

The role of graphene host structure/chemistry in plating–stripping in lithium metal anodes employed for lithium metal batteries is first examined in this study. Structural and chemical defects are bad, since highly defective graphene promotes unstable solid electrolyte interphase (SEI) growth. This consumes the fluoroethylene carbonate (FEC) additive in the carbonate electrolyte and is correlated with rapid decay in Coulombic efficiency (CE) and formation of filament-like Li dendrites. A unique flow-aided sonication exfoliation method is employed to synthesize “defect-free” graphene (df-G), allowing for a direct performance comparison with conventional reduced graphene oxide (r-GO). At cycle 1, the r-GO is better electrochemically wetted by Li than df-G, indicating that initially it is more lithiophilic. With cycling, the nucleation overpotential with r-GO becomes higher than with df-G, indicating less facile plating reactions. The df-G yields state-of-the-art electrochemical performance, with the post cycled metal surface being relatively smooth and dendrite-free. Conversely, r-GO templates have CE rapidly degrade from the onset, with extensive dendrites after cycling. Severe SEI growth and associated FEC depletion with r-GO are further confirmed by electrochemical impedance analysis and surface science methods. Finally, a new design rule is provided for Li metal templates: An ideal host must be noncatalytic toward SEI formation.

36 MATERIALS SCIENCE↗

Empirical Formula for Puncture Energy of Flat Metal Plates by a Cylindrical Flat Punch

Impact problems of plate-like parts by punch-like objects with relatively large mass moving at slow speeds of a few feet per second constitute a subset of impact problems of interest at Sandia. This is in contrast to small objects moving in the range of hundreds or thousands of feet per second or higher. The objective of this work is to develop a simple formula that can be used to estimate a lower bound for the puncture energy of metal plates impacted by cylindrical, essentially rigid punches of circular cross-section and at nose. Such geometry is used as a basis in the design of puncture mitigation barriers or procedures. This was accomplished by deriving an expression using non-dimensional analysis and then calibrating it based on tests results in the range of speeds of interest. Lower bounds can then be determined based on confidence intervals or factors of safety.

36 MATERIALS SCIENCE↗

Anode Potential Evolution During Zinc Metal Plating and Stripping in Dual-Solvent Battery Electrolytes

In the field of battery electrolyte research, the importance of the working cation solvation environment has become increasingly more apparent. To optimize bulk properties and, especially, interfacial reactions, multisolvent electrolytes (electrolytes containing two different solvents) have become more prevalent in battery research and development. In this work, we elucidate the relationship between cation solvation and interfacial electrochemistry, demonstrating that preferential solvation of Zn 2+ by a strong coordinating solvent such as 2-methoxyethylamine or ethylenediamine as opposed to a weaker solvent such as 3-methylsulfolane or acetonitrile leads to dynamic evolution in the interfacial energetics during Zn plating and stripping due to local changes in solvent composition and coordination. In some instances, interfacial solvation evolution can shift the reversible potential of Zn plating by as much as 1 V under relatively mild rate conditions. Through these investigations, we establish the generality of this phenomenon, highlight its importance as a consideration in dual-solvent battery electrolytes, and provide direction for tailoring electrochemistry through solvent design.

Hahn, Nathan T.↗

The Jupiter Experiments: High-240 Plutonium Metal Plates Separated by Lead and Reflected by Copper

Each layer consisted of a 6 by 6 matrix of either these fuel-filled containers or solid blocks of copper of the same outer dimensions. An example of this arrangement, along with one of the copper inner reflectors, is shown in Figure 1.4. This figure shows the same aluminum containers from Figure 1.3 but with the aluminum containers completely closed. The lifting rings shown on the copper inner reflector were only for assembly and were not present for the measurement (in which the holes were filled with copper plugs). Figure 1.5 shows the loading arrangement of the aluminum containers, along with aluminum shims around the container arrays to ensure a tight fit between these layers and the surrounding reflectors. All plates were in the same orientation; none were rotated in any fashion. Additional loading information for the PAHN plates and plate loading respective to the room entrance are provided in Figures 1.6 and 1.7, respectively.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Composition and method embodiments for plating metal coatings

Disclosed herein are embodiments of a coating composition and a method of using the same for forming metal coatings on substrates. In particular embodiments, the coating composition comprises a deep eutectic solvent and/or an ionic liquid; a metal precursor; an alkali metal salt; and an optional additive component. The coating composition and method embodiments disclosed herein provide durable, even, high-surface area coatings on various types of substrates and also can be used at low temperatures.

Hubbard, Lance R.↗

Low-inductance direct current power bus

A DC power bus having reduced parasitic inductance and higher tolerable operating temperature is disclosed. In example embodiments, a bus structure overlies a printed circuit board, and an array of capacitors is arranged on a surface of the printed circuit board distal the bus structure. The bus structure comprises an upper metal plate, a lower metal plate, and a dielectric film interposed between the upper and lower metal plates. The capacitors are connected in parallel between conductive planes of the printed circuit board. The upper and lower metal plates of the bus structure are connected to respective conductive planes of the printed circuit board.

Neely, Jason C.↗

Revealing and Elucidating ALD-Derived Control of Lithium Plating Microstructure

The practical implementation of Li metal batteries is hindered by difficulties in controlling the Li metal plating microstructure. While previous atomic layer deposition (ALD) studies have focused on directly coating Li metal with thin films for the passivation of the electrode–electrolyte interface, a different approach is adopted, situating the ALD film beneath Li metal and directly on the copper current collector. Here, a mechanistic explanation for this simple strategy of controlling the Li metal plating microstructure using TiO 2 grown on copper foil by ALD is presented. In contrast to previous studies where ALD-grown layers act as artificial interphases, this TiO 2 layer resides at the copper–Li metal interface, acting as a nucleation layer to improve the Li metal plating morphology. Upon lithiation of TiO 2 , a Li x TiO 2 complex forms; this alloy provides a lithiophilic surface layer that enables uniform and reversible Li plating. The reversibility of lithium deposition is evident from the champion cell (5 nm TiO 2 ), which displays an average Coulombic efficiency (CE) of 96% after 150 cycles at a moderate current density of 1 mA cm –2 . This simple approach provides the first account of the mechanism of ALD-derived Li nucleation control and suggests new possibilities for future ALD-synthesized nucleation layers.

25 ENERGY STORAGE↗

Ultrasonic Communication in Solid Channels using OFDM

Using an ultrasonic signal for communication is an alternate solution when electromagnetic waves are not feasible for carrying the information through the channel. We can use the ultrasonic signal to conduct communication in different types of media such as solid, liquid, and gas. In this study, we use ultrasound for communication through a metal plate channel. A metal plate is a highly dispersive and frequency selective channel with a severe multipath effect. The OFDM modulation method is customized for the ultrasonic communication channel to enhance communication reliability and reduce the bit error rate. With the channel frequency response, we adaptively map the transmitted information to optimize the selection of subcarriers frequency bands for the highest possible throughput.

OFDM↗

Understanding metal propagation in solid electrolytes due to mixed ionic-electronic conduction

Metal penetration into a solid electrolyte (SE) is one of the critical problems impeding the practical application of solid-state batteries. In this study, we investigate the conditions under which electronic conductivity of the SE can lead to metal deposition and fracture within the SE. Three different stages for void filling (metal plating initiation, metal growth, and metal compression) in the SE are identified. We show that a micron-size isolated void in the SE near the anode can be quickly filled in by metal and fractured when the developed pressure in the void grows larger than the maximum pressure the SE material can sustain. We find that the anode voltage and applied current density play a significant role in determining the vulnerability to metal deposition. We discuss several strategies to prevent electronic conductivity-driven metal propagation in electrolytes that are not fully dense, including the densified layers between the anode and SE.

25 ENERGY STORAGE↗