Search NASA⌕ Search

SEARCH · Search NASA

Results for “METALS - STRENGTH, COMPRESSIVE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

High-pressure structural systematics of dysprosium metal compressed in a neon pressure medium to 182 GPa

Here we present an experimental and theoretical study of dysprosium metal compressed in the soft pressure transmitting medium Ne up to 182 and 300 GPa, respectively. Angle-dispersive x-ray powder diffraction data from each of the high-pressure polymorphs shows anisotropic compression behavior indicating changes to the electron density distribution throughout its polymorphic landscape. We compare the monoclinic (mC4) and orthorhombic (oF16) structures for the collapsed structure for Dy above 82 GPa and verify that the oF16 structure offers a better fit to our data than the previously reported mC4 structure. Further, we have found that the oF16 structure undergoes similar anisotropic compression of its lattice parameters, with a turning point above 160 GPa; suggesting a potential phase transition at pressures much higher than achieved in this study. Density functional theory calculations show the likely candidate for this new high-pressure phase is the isosymmetric oF8 structure, which is predicted to be lower in energy than the oF16 structure above 275 GPa.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Inherent issues regarding the use of in situ x-ray diffraction measurements to determine temperature in shock-compressed metals

Temperature determination in shock compressed solids constitutes an important and long-standing scientific need. Since the reduction of Bragg diffracted peaks due to temperature increase, using the Debye-Waller factor, is well established, we examined the use of this approach to determine temperatures in shock compressed gold and platinum by representing the shocked state as a superposition of density and temperature changes. Comparison of the calculated and measured diffraction peaks did not show good agreement, because x-ray diffraction (XRD) profiles in the shock compressed state are not governed solely by density and temperature changes. XRD results are also influenced measurably by shock wave induced microstructural changes. Our results demonstrate that contributions from microstructural changes need to be incorporated and modeled in the theoretical analysis to use XRD measurements for reliable temperature determination in shock compressed solids.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Establishing temperature from radiance of dynamically compressed metals

Precise temperature determination is a significant challenge in extreme environments of dynamic compression studies. How can radiance measurements taken in high-pressure shock experiments constrain temperature in a meaningful and physically consistent way? Experiments maintaining sample compression against a transparent window can be tailored to present a uniform measurement area with uncertain spectral emissivity. We compare several methods to analyze radiance collected at multiple wavelengths, applying statistical methods and physical principles to improve temperature inference. With proper radiance collection and analysis, dynamic temperature uncertainties become comparable to thermomechanical ambiguities of the emitting surface.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Quasi-One-Dimensional Metallicity in Compressed CsSnI 3

Low-dimensional metal halides exhibit strong structural and electronic anisotropies, making them candidates for accessing unusual electronic properties. Here, in this work, we demonstrate pressure-induced quasi-one-dimensional (quasi-1D) metallicity in δ-CsSnI 3 . With the application of pressure up to 40 GPa, the initially insulating δ-CsSnI 3 transforms to a metallic state. Synchrotron X-ray diffraction and Raman spectroscopy indicate that the starting 1D chain structure of edge-sharing Sn–I octahedra in δ-CsSnI 3 is maintained in the high-pressure metallic phase while the SnI 6 octahedral chains are distorted. Our experiments combined with first-principles density functional theory calculations reveal that pressure induces Sn–Sn hybridization and enhances Sn–I coupling within the chain, leading to band gap closure and formation of conductive SnI 6 distorted octahedral chains. In contrast, the interchain I...I interactions remain minimal, resulting in a highly anisotropic electronic structure and quasi-1D metallicity. Our study offers a high-pressure approach for achieving diverse electronic platforms in the broad family of low-dimensional metal halides.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Effect of strain on the reactivity of graphene films

The effect of strain on the adsorption of atomic species (Cl, H, N, and O) on pristine and nitrogen-doped graphene is studied using density functional theory. Expansive strain increases surface reactivity by destabilizing graphene π orbitals, which is similar to the shift in the d-band center observed on stretched metal surfaces. However, compressive strain leads to the formation of nanoripples that strongly bind atomic species at ridge sites, which is fundamentally different from adsorption on compressed metal surfaces. Furthermore, our findings suggest that strain can be used as an effective means of manipulating graphene’s reactivity, which is explicitly shown here for the oxygen reduction reaction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

A novel method may reveal bulk metallic glass compressive ductility trends in high data rate nanoindentation

Recent methods allow novel amorphous alloy compositions to be rapidly manufactured at small scale; however, obtaining materials properties such as compressive ductility from these smaller specimens has remained a challenge. Here, we suggest a potential high-throughput nanoindentation method that may be able to rapidly characterize the relative compressive ductility between these alloys based on their serration characteristics. The properties of emergent serrations, when interpreted in a simple micromechanical stress relaxation model, may order these materials by their compressive plastic strain to failure. These results are consistent with the ordering obtained from compressed specimens as well as with model simulations, suggesting that this model may be broadly useful for interpreting compressive ductility from nanoindentation serrations. After it is validated on more materials, this new method will match the rapid pace of amorphous alloy development, thus allowing metallic glass properties to be fine-tuned for each application prior to scale prototyping.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Understanding metal propagation in solid electrolytes due to mixed ionic-electronic conduction

Metal penetration into a solid electrolyte (SE) is one of the critical problems impeding the practical application of solid-state batteries. In this study, we investigate the conditions under which electronic conductivity of the SE can lead to metal deposition and fracture within the SE. Three different stages for void filling (metal plating initiation, metal growth, and metal compression) in the SE are identified. We show that a micron-size isolated void in the SE near the anode can be quickly filled in by metal and fractured when the developed pressure in the void grows larger than the maximum pressure the SE material can sustain. We find that the anode voltage and applied current density play a significant role in determining the vulnerability to metal deposition. We discuss several strategies to prevent electronic conductivity-driven metal propagation in electrolytes that are not fully dense, including the densified layers between the anode and SE.

25 ENERGY STORAGE↗
DOE OSTI2022

Large-scale atomistic studies of sliding friction in polycrystalline aluminum interfaces

In this work, we discuss large-scale non-equilibrium molecular dynamics (NEMD) simulations of ductile metal sliding comprising up to 1.8 × 10 9 atoms over time scales of 100 ns. The results of these simulations have identified a variety of physical mechanisms that are important in determining the steady-state frictional force for a wide range of velocities at compressed metal–metal interfaces. These include grain growth and refinement, the evolution of large plastic strains and strain rates, material mixing, and melting. These phenomena can be included in a strain, strain rate, and grain size model that gives good agreement with the NEMD simulations and can be applied to macroscopic continua.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2024

Thermal Transport and Mechanical Stress Mapping of a Compression Bonded GaN/Diamond Interface for Vertical Power Devices

Bonding diamond to the back side of gallium nitride (GaN) electronics has been shown to improve thermal management in lateral devices; however, engineering challenges remain with the bonding process and characterizing the bond quality for vertical device architectures. Here, in this study, integration of these two materials is achieved by room-temperature compression bonding centimeter-scale GaN and a diamond die via an intermetallic bonding layer of Ti/Au. Recent attempts at GaN/diamond bonding have utilized a modified surface activation bonding (SAB) method, which requires Ar fast atom bombardment immediately followed by bonding within the same tool under ultrahigh vacuum (UHV) conditions. The method presented here does not require a dedicated SAB tool yet still achieves bonding via a room-temperature metal–metal compression process. Imaging of the buried interface and the total bonding area is achieved via transmission electron microscopy (TEM) and confocal acoustic scanning microscopy (C-SAM), respectively. The thermal transport quality of the bond is extracted from spatially resolved frequency-domain thermoreflectance (FDTR) with the bonded areas boasting a thermal boundary conductance of >100 MW/m 2 ·K. Additionally, Raman maps of GaN near the GaN–diamond interface reveal a low level of compressive stress, <80 MPa, in well-bonded regions. FDTR and Raman were coutilized to map these buried interfaces and revealed some poor thermally bonded areas bordered by high-stress regions, highlighting the importance of spatial sampling for a complete picture of bond quality. Overall, this work demonstrates a novel method for thermal management in vertical GaN devices that maintains low intrinsic stresses while boasting high thermal boundary conductances.

Raman↗
DOE OSTI2020

Quantum Non-Equilibrium Dynamics Prediction of Electronic Transport Coefficients in Non-Linear Regimes

The goal of this work was to develop unique LLNL capabilities for the computational prediction of electrical, optical and thermal transport properties from quantum simulations. Using a recently developed theory of microscopic quantum transport, we were able to model compressed metallic hydrogen and it’s non-linear and out-of-equilibrium contributions in electrical and thermal transport. This theory was implemented in the open-source, real-space time-dependent density functional theory code Octopus. This model is general and widely applicable to high energy density systems that are important to LLNL and NNSA mission areas.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Selected Negative Linear Compressibilities in the Metal–Organic Framework of [Cu(4,4'-bpy) 2 (H 2 O) 2 ]·SiF 6

Negative linear compressibility (NLC) is a rare high-pressure observation that lattice contraction is accompanied by the structural expansion along a specific direction. Generally, this counterintuitive phenomenon only derives from the intrinsic structural characteristics of materials and cannot be tuned by external perturbations. Searching for an effective method to control NLC effect is still a challenge in both chemical and material science. In this work, we successfully discover and select the NLC behaviors in the metal-organic framework (MOF) of [Cu(4,4'-bpy) 2 (H 2 O) 2 ]·SiF 6 (Cu(bpy)·SiF) through controlling the pressure conditions therein. The NLC effect of Cu(bpy)·SiF originates from the wine-rack mechanism that quasi-square grids transfer to rhombic ones with the structural expansion along the diagonal direction at high pressure. Meanwhile, both of the pressure range and magnitude of the NLC responses are enlarged with optimized pressure conditions. This study not only presents the intriguing selected NLC behaviors of a MOF but also proves the effects of pressure conditions on NLC, which offers promising strategies for further design and applications of NLC materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Effect of Crystallite Size on the Flexibility and Negative Compressibility of Hydrophobic Metal–Organic Frameworks

Flexible nanoporous materials are of great interest for applications in many fields such as sensors, catalysis, material separation, and energy storage. Of these, metal–organic frameworks (MOFs) are the most explored thus far. However, tuning their flexibility for a particular application remains challenging. In this work, we explore the effect of the exogenous property of crystallite size on the flexibility of the ZIF-8 MOF. By subjecting hydrophobic ZIF-8 to hydrostatic compression with water, the flexibility of its empty framework and the giant negative compressibility it experiences during water intrusion were recorded via in operando synchrotron irradiation. It was observed that as the crystallite size is reduced to the nanoscale, both flexibility and the negative compressibility of the framework are reduced by ~25% and ~15%, respectively. These results pave the way for exogenous tuning of flexibility in MOFs without altering their chemistries.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

The effect of aspect ratio on the mechanical behavior of Li metal in solid-state cells

The Li metal anode is necessary for solid-state batteries to dramatically exceed the energy density of state-of-the-art conventional Li-ion batteries. To enable the Li metal anode, the mechanical properties of Li metal under compression in a commercially relevant cell configuration must be determined. This work examines the compression creep behavior of Li metal coupled with a relevant model solid-state electrolyte (Li 6.5 La 3 Ta 0.5 Zr 1.5 O 12 ) and current collector (Ni) as a function of applied stress (1–10 MPa) and Li foil thickness (100–700 μm). At 1 MPa applied stress, the strain rate of all Li foil thicknesses under compression was almost four orders of magnitude lower than what is predicted from tensile creep tests. Steady-state creep behavior was observed for Li foil ≥350 μm at 5 MPa and ≥250 μm at 10 MPa. Conversely, sustained creep deformation was not observed for 100 and 150 μm Li foils at any applied stress. It is suggested that friction at the Li/LLZO and Li/Ni interfaces leads to the formation of hydrostatic stress that controls Li deformation at low aspect ratios. Finally, these results have implications for battery pack stack pressure requirements, particularly relating to void formation during stripping and Li metal filament penetration during plating.

25 ENERGY STORAGE↗
DOE OSTI2024

High Compression in Palladium Alloy Metal Foil Pumps

Metal foil pumps (MFPs) are key components in the direct internal recycling inner fuel cycle loop for the recovery of hydrogen isotopes from deuterium-tritium fusion exhaust. Operating under vacuum conditions, they utilize superthermal hydrogen as the feed gas in a process called superpermeation. A notable feature of MFPs is their ability to pump against a pressure gradient. This study examines the compression capabilities of PdAg and PdCu MFPs at low temperatures with a constant feed pressure of 10 Pa. At 75°C, compression ratios exceeding 200 were readily achieved, with downstream pressures exceeding 4500 Pa using PdCu. For both alloys, net fluxes decreased by only ~15% at downstream pressures of 1000 Pa, which offers potential simplifications for the downstream pump train. Performance declined markedly when the temperature was elevated to 200°C. Pump curves were constructed and advocated as the most appropriate manner to assess MFP performance. Separate pressure-driven-permeation experiments at relevant conditions were conducted, providing a direct measurement of the hydrogen dissociation constant $k$ d , which was found to be in good agreement with the previous literature. Further, these measurements were used to predict pump curves and maximum compression ratios by balancing superpermeation with pressure-driven permeation, achieving excellent agreement with experiment. Last, experiments using asymmetric MFPs revealed the detrimental impact that surface impurities have on performance in this system.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗