Search NASA⌕ Search

SEARCH · Search NASA

Results for “METALS - TEMPERATURES, HIGH”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Extraction of Neptunium, Plutonium, Americium, Zirconium, and Technetium by Di-(2-Ethylhexyl)- Iso -Butyramide (DEH i BA) at High Metal Loadings

Increased focus on carbon neutral energy has generated a resurgence of interest in nuclear power, and in particular advanced reactors which are likely to utilize high assay low enriched uranium (HALEU). This in turn could increase the economic attractiveness of recovering still partially enriched uranium from used nuclear fuel. Concomitant to development of advanced reactors, advanced reprocessing schemes should be developed which address the disadvantages to well established reprocessing schemes. The present study focuses on using di-(2-ethylhexyl)-iso-butyramide (DEHiBA) under high metal loading conditions for the reprocessing of used nuclear fuel. The elements examined in the study include the dominant transuranic actinides (Np, Pu, Am) as well as the often-problematic Tc and Zr. Further, by increasing the concentration of the extractant from the more commonly reported 1.0 M – 1.5 M, the extraction of hexavalent actinides is substantially increased, while maintaining effective rejection of tri, tetra, and pentavalent actinides, particularly in the presence of high loadings of uranium. In conclusion, the extraction of Zr by 1.5 M DEHiBA is noted to be negligible by comparison to tributyl phosphate (TBP), however the coextraction of Tc with U is observed to be nominally twice the quantity that is extracted by TBP indicating a need for effective Tc management.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2021

General synthesis of single-atom catalysts with high metal loading using graphene quantum dots

Transition-metal single-atom catalysts present extraordinary activity per metal atomic site, but suffer from low metal-atom densities (typically less than 5 wt% or 1 at.%), which limits their overall catalytic performance. Here we report a general method for the synthesis of single-atom catalysts with high transition-metal-atom loadings of up to 40 wt% or 3.8 at.%, representing several-fold improvements compared to benchmarks in the literature. Graphene quantum dots, later interweaved into a carbon matrix, were used as a support, providing numerous anchoring sites and thus facilitating the generation of high densities of transition-metal atoms with sufficient spacing between the metal atoms to avoid aggregation. A significant increase in activity in electrochemical CO 2 reduction (used as a representative reaction) was demonstrated on a Ni single-atom catalyst with increased Ni loading.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Transmission Spectroscopy for the Warm Sub-Neptune HD 3167c: Evidence for Molecular Absorption and a Possible High-metallicity Atmosphere

We present a transmission spectrum for the warm (500−600 K) sub-Neptune HD 3167c obtained using the Hubble Space Telescope Wide Field Camera 3 infrared spectrograph. We combine these data, which span the 1.125–1.643 μm wavelength range, with broadband transit measurements made using Kepler/K2 (0.6–0.9 μm) and Spitzer/IRAC (4–5 μm). We find evidence for absorption by at least one of H{sub 2}O, HCN, CO{sub 2}, and CH{sub 4} (Bayes factor 7.4; 2.5σ significance), although the data precision does not allow us to unambiguously discriminate between these molecules. The transmission spectrum rules out cloud-free hydrogen-dominated atmospheres with metallicities ≤100× solar at >5.8σ confidence. In contrast, good agreement with the data is obtained for cloud-free models assuming metallicities >700× solar. However, for retrieval analyses that include the effect of clouds, a much broader range of metallicities (including subsolar) is consistent with the data, due to the degeneracy with cloud-top pressure. Self-consistent chemistry models that account for photochemistry and vertical mixing are presented for the atmosphere of HD 3167c. The predictions of these models are broadly consistent with our abundance constraints, although this is primarily due to the large uncertainties on the latter. Interior structure models suggest that the core mass fraction is >40%, independent of a rock or water core composition, and independent of atmospheric envelope metallicity up to 1000× solar. We also report abundance measurements for 15 elements in the host star, showing that it has a very nearly solar composition.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Investigating the effects of local environment on nitrogen vacancies in high-entropy metal nitrides

High-entropy metal nitrides are an important material class in a variety of applications, and the role of nitrogen vacancies is of great importance for understanding their stability and mechanical properties. Here, we study six different high-entropy nitrides with eight different metal species to build a predictive model of the nitrogen-vacancy formation energy. We construct sets of supercells that maximize the number of unique nitrogen environments for a given chemistry, and then use density-functional theory to calculate the energy density for all nitrogen sites, and the vacancy formation energies for the highest, lowest, and a median subset based on the energy densities. The energy density of nitrogen sites correlates with the vacancy formation energies, for binary, ternary, and high-entropy nitrides. A linear regression model predicts the vacancy formation energies using only the nearest-neighbor composition; across our eight metals, we find the largest vacancy formation energies next to Hf, then Zr, Ti, V, Cr, Ta, Nb, and the lowest near Mo. Additionally, we see that binary nitride data show qualitatively similar vacancy formation energy trends for high-entropy nitrides; however, the binary data alone are insufficient to predict the complex nitride behavior. Our model is both predictive and easily interpretable, and correlates with experimental data.

DeSilva, Charith R. [Univ. of Illinois at Urbana-C↗
DOE OSTI2020

High-Entropy Metal Sulfide Nanoparticles Promise High-Performance Oxygen Evolution Reaction

Transition metal sulfide with a multi-elemental nature represents a class of promising catalysts for oxygen evolution reaction (OER) owing to its good catalytic activity. However, its synthesis remains a grand challenge due to the thermodynamic immiscibility of the constituent multimetallic elements in a sulfide structure. Herein, we for the first time report a high-entropy metal sulfide (HEMS, i.e., (CrMnFeCoNi)Sx) solid solution nanoparticles. Computational and X-ray photoelectron spectroscopy analysis suggest that the (CrMnFeCoNi)S x exhibits a synergistic effect among metal atoms that leads to desired electronic states to enhance OER activity. The (CrMnFeCoNi)Sx nanoparticles showed one of the best activities (low overpotential 295 mV at 100 mA cm -2 in 1 M KOH solution) and good durability (only slight polarization after 10 hours by chronopotentiometry) compared with the unary, binary, ternary, and quaternary sulfide counterparts. This work opens up a new synthesis paradigm for high-entropy compound nanoparticles for highly efficient electrocatalysis applications.

25 ENERGY STORAGE↗
DOE OSTI2020

High-Power Lithium Metal Batteries Enabled by High-Concentration Acetonitrile-Based Electrolytes with Vinylene Carbonate Additive

To enable next-generation high power, high-energy-density lithium (Li) metal batteries (LMBs), an electrolyte possessing both high Li Coulombic efficiency (CE) at high-rate and good anodic stability on cathodes is critical. Acetonitrile (AN) is a well-known organic solvent for high anodic stability and high ionic conductivity, yet its application in LMBs is limited due to its poor compatibility with Li metal anode even at high salt concentration conditions. Here, we developed a highly concentrated AN-based electrolyte with vinylene carbonate (VC) additive to suppress Li+ depletion at high current densities. Addition of VC in the AN-based electrolyte leads to the formation of a polycarbonate-based solid electrolyte interphase which minimizes Li corrosion and leads to very high Li CE of up to 99.1% at a current density of 0.2 mA cm-2. Using such an electrolyte, fast charging of Li||NMC333 cells has been realized at a high current density of 3.6 mA cm-2, and stable cycling of Li||NMC622 cells with a high cathode loading of 4 mAh cm-2 has also been demonstrated.

Peng, Zhe↗
DOE OSTI2021

Optimization of Magnesium‐Doped Lithium Metal Anode for High Performance Lithium Metal Batteries through Modeling and Experiment

Abstract Lithium (Li)‐magnesium (Mg) alloy with limited Mg amount, which can also be called Mg‐doped Li (Li‐Mg), has been considered as a potential alternative anode for high energy density rechargeable Li metal batteries. However, the optimum doping‐content of Mg in Li‐Mg anode and the mechanism of the improved performance are not well understood. Herein, density functional theory (DFT) calculations are used to investigate the effect of Mg amount in Li‐Mg anode. The Li‐Mg with about 5 wt. % Mg (abbreviated as Li‐Mg5) has the lowest absorption energy of Li, thus all the surface area can be “controlled” by Mg atoms, leading to the smooth and continuous deposition of Li on the surface around the Mg center. A localized high concentration electrolyte enables Li‐Mg5 to exhibit the best cycling stability in Li metal batteries with high‐loading cathode and lean electrolyte under 4.4 V high‐voltage, which is approaching the demand of practical application. This electrolyte also helps generate an inorganic‐rich solid electrolyte interphase, which leads to smooth, compact and less corrosion layer on the Li‐Mg5 surface. Both theoretical simulations and experimental results prove that Li‐Mg5 has optimum Mg content and gives best battery cycling performance.

Gao, Peiyuan↗
DOE OSTI2025

Low-symmetry polymorph of GaP upends bonding paradigms of metallic high-pressure III–V compounds

Here, the pressure-induced polymorphism of binary octet compounds has long been considered a settled problem although the possible atomic disordering of some phases remains a puzzling observation. Taking GaP as a case study, we conclude, through x-ray microdiffraction and first-principles calculations, that its high-pressure metallic phase (previously reported as being disordered) adopts in fact an ordered base-centered monoclinic structure previously unknown in this class of compounds. The formation of layered patterns with variable degrees of interlayer dimerization, as observed in GaP, marks a paradigm shift of our understanding of ordering in octet high-pressure phases which calls for a more extensive re-examination. A rich polymorphism with fine tuning of chemical and physical properties can be envisioned.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Optimization of Magnesium-Doped Lithium Metal Anode for High Performance Lithium Metal Batteries through Modeling and Experiment

Lithium (Li)-magnesium (Mg) alloy with limited Mg amount, which can also be called Mg-doped Li (Li-Mg), has been considered as a potential alternative anode for high energy density rechargeable Li metal batteries. However, the optimum doping-content of Mg in Li-Mg anode and the mechanism of the improved performance are not well understood. In this study, density functional theory (DFT) calculations are used to investigate the effect of Mg amount in Li-Mg anode. The Li-Mg with about 5 wt. % Mg (abbreviated as Li-Mg5) has the lowest absorption energy of Li, thus all the surface area can be “controlled” by Mg atoms, leading to the smooth and continuous deposition of Li on the surface around the Mg center. A localized high concentration electrolyte enables Li-Mg5 to exhibit the best cycling stability in Li metal batteries with high-loading cathode and lean electrolyte under 4.4 V high-voltage, which is approaching the demand of practical application. This electrolyte also helps generate an inorganic-rich solid electrolyte interphase, which leads to smooth, compact and less corrosion layer on the Li-Mg5 surface. Both theoretical simulations and experimental results prove that Li-Mg5 has optimum Mg content and gives best battery cycling performance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Quantum-Accurate Multiscale Modeling of Shock Hugoniots, Ramp Compression Paths, Structural and Magnetic Phase Transitions, and Transport Properties in Highly Compressed Metals

Fully characterizing high energy density (HED) phenomena using pulsed power facilities (Z machine) and coherent light sources is possible only with complementary numerical modeling for design, diagnostic development, and data interpretation. The exercise of creating numerical tests, that match experimental conditions, builds critical insight that is crucial for the development of a strong fundamental understanding of the physics behind HED phenomena and for the design of next generation pulsed power facilities. The persistence of electron correlation in HED materials arising from Coulomb interactions and the Pauli exclusion principle is one of the greatest challenges for accurate numerical modeling and has hitherto impeded our ability to model HED phenomena across multiple length and time scales at sufficient accuracy. An exemplar is a ferromagnetic material like iron, while familiar and widely used, we lack a simulation capability to characterize the interplay of structure and magnetic effects that govern material strength, kinetics of phase transitions and other transport properties. Herein we construct and demonstrate the Molecular-Spin Dynamics (MSD) simulation capability for iron from ambient to earth core conditions, all software advances are open source and presently available for broad usage. These methods are multi-scale in nature, direct comparisons between high fidelity density functional theory (DFT) and linear-scaling MSD simulations is done throughout this work, with advancements made to MSD allowing for electronic structure changes being reflected in classical dynamics. Main takeaways for the project include insight into the role of magnetic spins on mechanical properties and thermal conductivity, development of accurate interatomic potentials paired with spin Hamiltonians, and characterization of the high pressure melt boundary that is of critical importance to planetary modeling efforts.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Design principles of heterointerfacial redox chemistry for highly reversible lithium metal anode

High electrochemical reversibility is required for the application of high-energy-density lithium (Li) metal batteries; however, inactive Li formation and SEI (solid electrolyte interface)-instability-induced electrolyte consumption cause low Coulombic efficiency (CE). The prior interfacial chemical designs in terms of alloying kinetics have been used to enhance the CE of Li metal anode; however, the role of its redox chemistry at heterointerfaces remains a mystery. Herein, the relationship between heterointerfacial redox chemistry and electrochemical transformation reversibility is investigated. It is demonstrated that the lower redox potential at heterointerface contributes to higher CE, and this enhancement in CE is primarily due to the regulation of redox chemistry to Li deposition behavior rather than the formation of SEI films. Low oxidation potential facilitates the formation of the surface with the highly electrochemical binding feature after Li stripping, and low reduction potential can maintain binding ability well during subsequent Li plating, both of which homogenize Li deposition and thus optimize CE. In particular, Mg hetero-metal with ultra-low redox potential enables Li metal anode with significantly improved CE (99.6%) and stable cycle life for 700 cycles at 3.0 mA cm -2 . This work provides insight into the heterointerfacial design principle of next-generation negative electrodes for highly reversible metal batteries.

25 ENERGY STORAGE↗
DOE OSTI2021

Overcoming the phase separation within high-entropy metal carbide by poly(ionic liquid)s

High-entropy crystalline materials are attracting more attention. In principle, high-entropy metal carbides (HMCs) that contain five or more metal ions, possess more negative free energy value during catalysis. But its preparation is challenging because of the immiscibility of multi metal cations in a single carbide solid solution. Here, a rational strategy for preparing HMC is proposed via a coordination-assisted crystallization process in the presence of Br-based poly(ionic liquids). Through this method, Mo 0.2 W 0.2 V 0.2 Cr 0.2 Nb 0.2 C nanoparticles, with a single cubic phase structure, incorporated on porous carbon, are obtained (HMC@NC). By combination of well dispersed small particle size (~4 nm), high surface area (~270 m 2 g –1 ), and high-entropy phase, HMC@NC can function as a promising catalyst for the dehydrogenation of ethylbenzene. Here, unexpected activity (EB conv.: 73%) and thermal stability (>100 h on steam) at 450 °C are observed. Such a facile synthetic strategy may inspire the fabrication of other types of HMCs for more specific tasks.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Monofluorinated acetal electrolyte for high-performance lithium metal batteries

High degree of fluorination for ether electrolytes has resulted in improved cycling stability of lithium metal batteries due to stable solid electrolyte interphase (SEI) formation and good oxidative stability. However, the sluggish ion transport and environmental concerns of high fluorination degree drive the need to develop less fluorinated structures. Here, we depart from the traditional ether backbone and introduce bis(2-fluoroethoxy)methane (F2DEM), featuring monofluorination of the acetal backbone. High coulombic efficiency and stable long-term cycling in Li||Cu half cells can be achieved with F2DEM even under fast Li metal plating conditions. The performance of F2DEM is further compared with diethoxymethane (DEM) and 2-[2-(2,2-difluoroethoxy)ethoxy]-1,1,1-trifluoroethane (F5DEE). A significantly lower overpotential is observed with F2DEM, which improves energy efficiency and enables its application in high-rate conditions. Comparative studies of F2DEM with DEM and F5DEE in anode-free lithium iron phosphate (LiFePO4) LFP pouch cells and high-loading LFP coin cells further show improved capacity retention of F2DEM electrolyte, demonstrating its practical applicability. More importantly, we also extensively investigate the underlying mechanism for the superior performance of F2DEM through various techniques, including X-ray photoelectron spectroscopy, scanning electron microscopy, cryogenic electron microscopy, focused ion beam, electrochemical impedance spectroscopy, and titration gas chromatography. Overall, F2DEM facilitates improved Li deposition morphology with reduced amount of dead Li. This enables F2DEM to show superior performance, especially under higher charging and slower discharging rate conditions.

25 ENERGY STORAGE↗
DOE OSTI2024

Uncertainty quantification of material parameters in modeling coupled metal and high explosive experiments

Experiments involving the coupling of metal and high explosives (HE) are of notable defense-related interest, and we seek to refine the uncertainty quantification associated with models of such experiments. In particular, our focus is on how uncertainty related to the metal constitutive model challenges our ability to infer high explosive model parameters when analyzing focused science experiments. We consider three focused experiments involving an HE accelerating metal: small plate tests with tantalum/LX-14 and tantalum/LX-17 pairings as well as a tantalum/LX-17 cylinder test. For all three models, we perform sensitivity analysis to ascertain the influence of metal strength on the coupled experimental response. Moreover, we calibrate each model in a Bayesian setting and study the quantification of metal strength on the inference of the HE parameters. Based on our results, we offer guidance for future metal/HE experiments.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Stable single-site organonickel catalyst preferentially hydrogenolyses branched polyolefin C–C bonds

Current methods of processing accumulated polyolefin waste typically require harsh conditions, precious metals or high metal loadings to achieve appreciable activities. Here, in this work, we examined supported, single-site organonickel catalysts for polyolefin upcycling. Chemisorption of Ni(COD) 2 (COD, 1,5-cyclooctadiene) onto Brønsted acidic sulfated alumina (AlS) yields a highly electrophilic Ni(I) precatalyst, AlS/Ni(COD) 2 , which is converted under H 2 to the active AlS/Ni II H catalyst. This single-site system exhibits unique hydrogenolysis selectivity that favours cleaving branched polyolefin C–C linkages, enabling the hydrogenolytic separation of polyethylene and isotactic polypropylene (iPP) mixtures. Moreover, AlS/Ni II H remains highly selective and active for hydrogenolysis of iPP admixed with polyvinyl chloride, and the spent catalyst can be repeatedly regenerated by AlEt3 treatment. Experimental mechanistic analysis and density functional theory modelling reveal a turnover-limiting C–C scission pathway featuring β-alkyl transfer and strong olefin binding. These results highlight the potential of nickel-based systems for the selective upcycling of complex plastic waste streams.

green chemistry↗