Search NASA⌕ Search

SEARCH · Search NASA

Results for “METAMORPHIC ROCKS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Not all moissanites are created equal: New constraints on moissanite from metamorphic rocks of Bulgaria

Here, terrestrial moissanite (SiC) is widely reported as an ultra-high pressure mineral occurring in kimberlites, diamonds and ultramafic/mafic rocks of mantle origin. However, the conditions of crystallization remain largely unknown. Moreover, dozens of SiC occurrences have been reported from continental crust sources such as granitoids, andesite–dacite volcanic rocks and their breccia, metasomatic and metamorphic rocks, and even limestones. The validity of many of these reports is still debated primarily due to possible contaminations from the widespread use of synthetic SiC abrasives in samples preparation. Indeed, reports of well-documented in-situ occurrences of moissanite in association with co-existing minerals are still scarce. The only condition of moissanite formation that is agreed upon is that extremely reducing media are required (e.g. 4.5–6 log units below the iron-wustite buffer). Here, we report the new occurrence of moissanite that was found in-situ within the garnet–staurolite–mica schists of Topolovgrad metamorphic group of Triassic age in Southern Bulgaria. The 10–300 μm moissanite crystals are situated within 0.1–1.2 mm isolated clusters, filled with amorphous carbon and nanocrystalline graphite. Most of moissanite crystals are 15R (rhombohedral) and 6H (hexagonal) polytypes, and one prismatic crystal, found within them, exhibits unusual concentric polytypical zoning with core (15R), intermediate zone (6H) and rim (3C-cubic). Experimental data show that this type of polytypical zonation is likely due to a decrease in temperature (or/and pressure?) and changes in Si/C ratio. Indeed, amphibolite facies metamorphism (500–580°C – garnet–staurolite zone) followed by a subsequent cooling during the retrograde stage of green schist facies metamorphism (~400–500°C) could have provided a change in temperature. The SiC containing clusters exhibit evidence that they are pre-metamorphic, and we hypothesize that their protolith was a “black shale” material likely rich in carbon, hydrocarbon and terrigenous silica. The latter served as a source of isolated chemically-reduced media, which is required for SiC formation. Other concepts to explain moissanite occurrences in metasedimentary rocks are also discussed. Importantly, our findings show that the formation conditions of moissanite are likely more variable than previously recognized.

15R-SiC↗

Signature of Cenozoic orogenic movements in combustion metamorphic rocks: mineralogy and geochronology (example of the Salair-Kuznetsk Basin transition)

Cenozoic combustion metamorphic (CM) complexes produced by fossil natural coal fires are widespread at range-basin junctions worldwide. Large-scale fires accompany the initial orogenic phases as fresh coal-bearing strata become drawn into the aeration zone as a result of crustal deformation. In combustion metamorphism, the protolith melts to different degrees either into ferrous basic paralava or in glassy clinker. The melt rocks have a phase composition favorable for Ar-40/Ar-39 dating of ignition coeval with the onset of each episode in Late Cenozoic orogenic events. We suggest an algorithm providing correct Ar-40/Ar-39 age determination of CM rocks followed by well-grounded geological interpretation and test the new approach on melt rocks from the Kuznetsk Coal Basin. Paralava samples were dated by Ar-40/Ar-39 incremental heating and the isotope ratios were corrected for Ca-, Cl-, and K-derived Ar isotopic interferences. The interpretation of age-spectrum results was checked against internal and external criteria. The former were plateau and isochrone ages and the latter included the so-called 'couple criterion' and conventional relative ages inferred from geological and stratigraphic evidence. As a result, we distinguished two groups of dates for combustion metamorphic events bracketed between 1.2 {+-} 0.4 and 0.2 {+-} 0.3 Ma. The older ages represent rocks in the western edge of the Prokopievsk-Kiselevsk block of the Salair zone and the younger dates correspond to those in its eastern edge. The reported dates record the time when the fault boundaries of the blocks were rejuvenated during recent activity and the block accreted to the Salair orogenic area as a submontane step. The suggested approach to the choice of objects, classification of rocks, and interpretation of Ar-40/Ar-39 spectra is universal and can be practiced in any area of combustion metamorphism.

01 COAL, LIGNITE, AND PEAT↗

Preferred Orientation of Quartz in Metamorphic Rocks from the Bergell Alps

Crystal preferred orientation of 47 samples of quartzite and eight samples of associated marbles from the Bergell Alps have been analyzed with time-of-flight neutron diffraction and EBSD. The results show a clear distinction of texture types for quartzites transformed from Triassic sandstones and quartz layers in gneiss. Textures of Triassic quartzites are overall weak and display a maximum of c-axes perpendicular to the foliation or a crossed girdle perpendicular to the lineation. Pole figures for positive rhombs {10 1 ¯ 1} show a maximum perpendicular to the foliation and negative rhombs {01 1 ¯ 1} generally display a minimum. Based on polycrystal plasticity models this texture type can be attributed to a combination of basal and rhombohedral slip. Asymmetry of the distributions is attributed to simple shear and local strain heterogeneities. The relatively weak texture is partially caused by muscovite limiting dislocation motion and grain growth, as well as adjacent layers of marble that accommodate significant strain. Most quartz layers in gneiss, including mylonites, display a texture with a-axes parallel to the lineation and a c-axis maximum in the intermediate fabric direction. This texture type can be attributed to dominant prismatic slip. Many samples are recrystallized and recrystallization appears to strengthen the deformation texture. The study shows good agreement of neutron diffraction and EBSD. Neutron diffraction data average over larger volumes and maximum pole densities are generally lower and more representative for the bulk material. With EBSD the microstructure and mechanical twinning can be quantified.

54 ENVIRONMENTAL SCIENCES↗

Epithermal Neutron Activation Analysis of Some Geological Samples of Different Origin

Instrumental Epithermal Neutron Activation Analysis was used to investigate the distribution of six major elements and 34 trace elements in a set of eight igneous and metamorphic rocks collected from Carpathian and Macin Mountainsas well as unconsolidated sediments collected from anoxic zone of the Black Sea. All experimental data were interpreted within the Upper Continental Core and Mid Ocean Ridge Basalt model system that allowed getting more information concerning samples origin as well as the environmental peculiarities.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Self-organized rock textures and multiring structure in the Duolun crater

The Duolun impact crater is a multiring basin located 200 km north of Beijing. From the center to the edge of the crater there are innermost rim, inner ring, outer rim, and outermost ring. Recently, we have found some self-organized textures or chaos phenomena in shock-metamorphic rocks from the Duolun impact crater, such as turbulence in matrices of impact glass, oscillatory zoning, or chemical chaos of spherulites in spherulitic splashed breccia, fractal wavy textures or self-similar wavy textures with varied scaling in impact glass, and crystallite beams shaped like Lorentz strange attractors. The rare phenomena indicate that the shock-metamorphic rocks from Duolun crater are formed far from equilibrium. If impact cratering generates momentarily under high-pressure and superhigh-temperature, occurrence of those chaos phenomena in shock-metamorphic rock is not surprising.

Wu, Siben↗

Thermal-chemical-mechanical feedback during fluid-rock interactions: Implications for chemical transport and scales of equilibria in the crust

Our research evaluates the hypothesis that feedback amongst thermal-chemical-mechanical processes operative in fluid-rock systems alters the fluid flow dynamics of the system which, in turn, affects chemical transport and temporal and spatial scales of equilibria, thus impacting the resultant mineral textural development of rocks. Our methods include computational experimentation and detailed analyses of fluid-infiltrated rocks from well-characterized terranes. This work focuses on metamorphic rocks and hydrothermal systems where minerals and their textures are utilized to evaluate pressure (P), temperature (T), and time (t) paths in the evolution of mountain belts and ore deposits, and to interpret tectonic events and the timing of these events. Our work on coupled processes also extends to other areas where subsurface flow and transport in porous media have consequences such as oil and gas movement, geothermal system development, transport of contaminants, nuclear waste disposal, and other systems rich in fluid-rock reactions. Fluid-rock systems are widespread in the geologic record. Correctly deciphering the products resulting from such systems is important to interpreting a number of geologic phenomena. These systems are characterized by complex interactions involving time-dependent, non-linear processes in heterogeneous materials. While many of these interactions have been studied in isolation, they are more appropriately analyzed in the context of a system with feedback. When one process impacts another process, time and space scales as well as the overall outcome of the interaction can be dramatically altered. Our goals to test this hypothesis are: to develop and incorporate algorithms into our 3D heat and mass transport code to allow the effects of feedback to be investigated numerically, to analyze fluid infiltrated rocks from a variety of terranes at differing P-T conditions, to identify subtle features of the infiltration of fluids and/or feedback, and to quantify the importance of feedback in complex fluid-rock systems and its affects on time and space scales and rates of reaction. We have made significant contributions toward understanding feedback and its impacts by numerical experimentation using 3D computational modeling of fluid-rock systems and by chemical and textural analyses of fluid-infiltrated rocks.

58 GEOSCIENCES↗

Fracture Propagation and Permeability Change under Poro-thermoelastic Loads & Silica Reactivity in Enhanced Geothermal Systems

Geothermal energy is recovered by circulating water through heat exchange areas within a hot rock mass. Geothermal reservoir rock masses generally consist of igneous and metamorphic rocks that have low matrix permeability. Therefore, cracks and fractures play a significant role in extraction of geothermal energy by providing the major pathways for fluid flow and heat exchange. Therefore, knowledge of the conditions leading to formation of fractures and fracture networks is of paramount importance. Furthermore, in the absence of natural fractures or adequate connectivity, artificial fractures are created in the reservoir using hydraulic fracturing. Multiple fractures are preferred because of the large size necessary when using only a single fracture. Although the basic idea is rather simple, hydraulic fracturing is a complex process involving interactions of high pressure fluid injections with a stressed hot rock mass, mechanical interaction of induced fractures with existing natural fractures, and the spatial and temporal variations of in-situ stress. As a result, it is necessary to develop tools that can be used to study these interactions as an integral part of a comprehensive approach to geothermal reservoir development, particularly enhanced geothermal systems. In response to this need we have developed advanced poro-thermo-chemo-mechanical fracture models for rock fracture research in support of EGS design. The fracture propagation models are based on a regular displacement discontinuity formulation. The fracture propagation studies include modeling interaction of induced fractures. In addition to the fracture propagation studies, two-dimensional solution algorithms have been developed and used to estimate the impact of pro-thermo-chemical processes on fracture permeability and reservoir pressure. Fracture permeability variation is studied using a coupled thermo-chemical model with quartz reaction kinetics. The model is applied to study quartz precipitation/dissolution, as well as the variation in fracture aperture and pressure. Also, a three-dimensional model of injection/extraction has been developed to consider the impact poro- and thermoelastic stresses on fracture slip and injection pressure. These investigations shed light on the processes involved in the observed phenomenon of injection pressure variation (e.g., in Coso), and allow the assessment of the potential of thermal and chemical stimulation strategies.

15 GEOTHERMAL ENERGY↗

LANDSAT 4 investigations of Thematic Mapper and Multispectral Scanner applications

Structural and stratigraphic characteristics of the Drum Mountains in Utah were obtained using LANDSAT 5 TM data that were digitally enhanced using band ratioing, principal components analysis, and spatial filtering techniques. Color ratioing composite images proved most useful for distinguishing between and identifying exposure of hyroxly bearing hydrothermally altered inclusive rocks and bleached contact metamorphic rocks dominated by calc-silicate mineral assemblages. The amount and detail of geologic information interpreted from TM images is more significant than that from MSS and in geologic maps. Enhanced LANDSAT 5 TM data also identified and mapped hydrothermal alteration and distinguished between altered and unaltered limonitic assemblages in the Tonopath, Nevada quadrangle.

Lauer, D. T.↗

Mapping Weathering and Alteration Minerals in Virginia City, Nevada with AVIRIS and HyperSpecTIR

Situated on the east side of the Virginia Range, Virginia City (Figure 1) is the home of the historic Comstock mining district and was mined as a source of Au and Ag between 1859 and the 1960's, with numerous underground workings and small open pit operations. The Virginia Range consists mostly of Oligocene to Miocene volcanic rocks that overlie Mesozoic metamorphic rocks (Mzvs) and Cretaceous granodiorite (Kgd). Andesite to dacite flows, breccias and intrusives of the Alta Formation (Ta) (18-15 Ma) (Hudson, 2003) are overlain by intermediate volcanic, volcaniclastic and locally intrusive rocks of the Kate Peak Formation (Tk) (14.7-12 Ma) (Vikre, 1998; Hudson, 2003). Contemporaneous with the Alta Formation was the intrusion of the Davidson diorite (1 5.2 Ma) (Castor et al., 2002), which forms the bulk of Mt. Davidson just west of the town site.

HyperSpecTIR (HST)↗

Post-metamorphic brecciation in type 3 ordinary chondrites

Type 3.1-3.9 ordinary chondrites can be divided into two kinds: those in which the compositions of chondrule silicates are entirely consistent with metamorphism of type 3.0 material, and those in which the computational heterogeneity appears to be too extreme for in situ metamorphism. We present petrologic data for three LL3 chondrites of the second kind--Ngawi, ALH A77278 (both type 3.6), and Hamlet (type 3.9)--and compare these data with results for the first kind of LL3-4 chondrites. Given that chondrules form in the nebula and that metamorphic equilibration occurs in asteroids, our new data imply that Ngawi, A77278, Hamlet, and many other type 3 ordinary chondrites are post-metamorphic breccias containing materials with diverse metamorphic histories; they are not metamorphic rocks or special kinds of 'primitive breccias.' We infer also that metamorphism to type 3.1-3.9 levels produces very friable material that is easily remixed into breccias and lithified by mild shock. Thus, petrologic types and subtypes of chondrites indicate the mean metamorphic history of the ingredients, not the thermal history of the rock. The metamorphic history of individual type 1 or 2 porphyritic chondrules in type 3 breccias is best derived from olivine and pyroxene analyses and the data of McCoy et al. for unbrecciated chondrites. The new chondrule classification schemes of Sears, DeHart et al., appears to provide less information about the original state and metamorphic history of individual porphyritic chondrules and should not replace existing classification schemes.

Scott, E. R. D.↗

Update on NEA-TDB Database Development and Database Formatting Tool

This progress report (Level 4 Milestone Number M4SF-21LL010302062) summarizes research conducted at Lawrence Livermore National Laboratory (LLNL) within the Crystalline International Collaborations Activity Number SF-21LL01030206. The activity is focused on our long-term commitment of engaging our partners in international nuclear waste repository research. This includes participation in the Nuclear Energy Agency Thermochemical Database (NEA TDB) Project (Cindy Atkins-Duffin) and development of methodologies for integrating US and international thermodynamic databases for use in SFWST Generic Disposal System Assessment (GDSA) efforts. LLNL is supporting the overall objectives of the Disposal Research (DR) Crystalline International Collaborations Research and Development (R&D) control account. The objective of this control account is to advance our understanding of long-term disposal of spent fuel in crystalline rocks (including both granitic and metamorphic rocks) and to develop necessary experimental and computational capabilities to evaluate various disposal concepts in such media.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Cathodoluminescence of shocked quartz at the Cretaceous-Tertiary boundary

Empirical studies have documented an association between rock type and the cathodoluminescence color of constituent quartz grains. Quartz from extrusive igneous sources luminesces uniform pale blue. Quartz from intrusive igneous and high-grade metamorphic rocks generally luminesces darker purple-blue, whereas quartz recrystallized under low-grade metamorphic conditions luminesces reddish-brown. Quartz grains in most sandstones luminesce a heterogeneous mixture of these colors because the grains were derived from a variety of ultimate source rocks. If shocked quartz found at the Cretaceous-Tertiary (K-T) boundary is volcanic in origin, its cathodoluminescence should be predominantly pale blue. Alternatively, quartz grains derived from bolide impact upon, and ejection of, mixed igneous, metamorphic, and sedimentary rocks should luminesce a variety of colors. Grain mounts of sand collected at the K-T boundary horizon from the Clear Creek North site in the Raton Basin, Colorado were examined. Shocked quartz luminesced a variety of colors and very few grains luminesced the pale blue color that is typical of volcanic quartz. It was concluded that the shocked quartz was derived from a petrologically diverse source region without substantial volcanic contribution. Most shocked grains apparently were derived from low-grade metamorphic rocks, with a slightly smaller contribution from high-grade metamorphic and intrusive igneous rocks. Rare quartz grains with brown-luminescing rims reflect a minor addition from detrital sedimentary sources. The apparent relative abundances of intrusive (and rare extrusive) igneous, metamorphic, and sedimentary ultimate source rocks suggested by CL colors of shock-deformed quartz at the K-T boundary is consistent with a crustal/supracrustal origin for the grains.

Owen, Michael R.↗

Identifying Rare Earth Elements and Thorium and Uranium in Iron Oxide–Apatite Deposit of Gazestan Bafgh, Southeast of Iran

The Gazestan magnetite-apatite deposit is one of Kiruna-type deposits located 78 km from Bafgh in the province of Yazd, in the Bafgh Posht-e-Badam district, southeast of Iran. In the mining region of Bafgh, volcanic rocks and Precambrian volcano-sedimentary are the main host of iron-apatite deposits. Iron deposits are essentially located in Bafgh region inside the green acidic metamorphic rocks. Volcanic rocks are basically rhyolite and rhyodacitic and the sedimentary units are mostly made of dolomite. Rock units of the region belong to the Rizzo series. The Bafgh apatite compounds are fluoride-type and seen in the monazite mineral. The similarity of the rare earth elements pattern in all samples indicates the magma source. The most amount of rare earth elements in the Gazestan deposit include 7766.25 ppm and the most amount of Th is equal to 65.1 ppm and U is equal to 8.33 ppm. The most amount of P2O5 s equal to 26.5 wt% and Fe is equal to 61.3 wt%. Also, it can be concluded that due to their high correlation with rare earth elements, the deposit is of Uranium Thorium-bearing type.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗