Search NASA⌕ Search

SEARCH · Search NASA

Results for “METAMORPHIC ROCKS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Not all moissanites are created equal: New constraints on moissanite from metamorphic rocks of Bulgaria

Here, terrestrial moissanite (SiC) is widely reported as an ultra-high pressure mineral occurring in kimberlites, diamonds and ultramafic/mafic rocks of mantle origin. However, the conditions of crystallization remain largely unknown. Moreover, dozens of SiC occurrences have been reported from continental crust sources such as granitoids, andesite–dacite volcanic rocks and their breccia, metasomatic and metamorphic rocks, and even limestones. The validity of many of these reports is still debated primarily due to possible contaminations from the widespread use of synthetic SiC abrasives in samples preparation. Indeed, reports of well-documented in-situ occurrences of moissanite in association with co-existing minerals are still scarce. The only condition of moissanite formation that is agreed upon is that extremely reducing media are required (e.g. 4.5–6 log units below the iron-wustite buffer). Here, we report the new occurrence of moissanite that was found in-situ within the garnet–staurolite–mica schists of Topolovgrad metamorphic group of Triassic age in Southern Bulgaria. The 10–300 μm moissanite crystals are situated within 0.1–1.2 mm isolated clusters, filled with amorphous carbon and nanocrystalline graphite. Most of moissanite crystals are 15R (rhombohedral) and 6H (hexagonal) polytypes, and one prismatic crystal, found within them, exhibits unusual concentric polytypical zoning with core (15R), intermediate zone (6H) and rim (3C-cubic). Experimental data show that this type of polytypical zonation is likely due to a decrease in temperature (or/and pressure?) and changes in Si/C ratio. Indeed, amphibolite facies metamorphism (500–580°C – garnet–staurolite zone) followed by a subsequent cooling during the retrograde stage of green schist facies metamorphism (~400–500°C) could have provided a change in temperature. The SiC containing clusters exhibit evidence that they are pre-metamorphic, and we hypothesize that their protolith was a “black shale” material likely rich in carbon, hydrocarbon and terrigenous silica. The latter served as a source of isolated chemically-reduced media, which is required for SiC formation. Other concepts to explain moissanite occurrences in metasedimentary rocks are also discussed. Importantly, our findings show that the formation conditions of moissanite are likely more variable than previously recognized.

15R-SiC↗

Signature of Cenozoic orogenic movements in combustion metamorphic rocks: mineralogy and geochronology (example of the Salair-Kuznetsk Basin transition)

Cenozoic combustion metamorphic (CM) complexes produced by fossil natural coal fires are widespread at range-basin junctions worldwide. Large-scale fires accompany the initial orogenic phases as fresh coal-bearing strata become drawn into the aeration zone as a result of crustal deformation. In combustion metamorphism, the protolith melts to different degrees either into ferrous basic paralava or in glassy clinker. The melt rocks have a phase composition favorable for Ar-40/Ar-39 dating of ignition coeval with the onset of each episode in Late Cenozoic orogenic events. We suggest an algorithm providing correct Ar-40/Ar-39 age determination of CM rocks followed by well-grounded geological interpretation and test the new approach on melt rocks from the Kuznetsk Coal Basin. Paralava samples were dated by Ar-40/Ar-39 incremental heating and the isotope ratios were corrected for Ca-, Cl-, and K-derived Ar isotopic interferences. The interpretation of age-spectrum results was checked against internal and external criteria. The former were plateau and isochrone ages and the latter included the so-called 'couple criterion' and conventional relative ages inferred from geological and stratigraphic evidence. As a result, we distinguished two groups of dates for combustion metamorphic events bracketed between 1.2 {+-} 0.4 and 0.2 {+-} 0.3 Ma. The older ages represent rocks in the western edge of the Prokopievsk-Kiselevsk block of the Salair zone and the younger dates correspond to those in its eastern edge. The reported dates record the time when the fault boundaries of the blocks were rejuvenated during recent activity and the block accreted to the Salair orogenic area as a submontane step. The suggested approach to the choice of objects, classification of rocks, and interpretation of Ar-40/Ar-39 spectra is universal and can be practiced in any area of combustion metamorphism.

01 COAL, LIGNITE, AND PEAT↗

Preferred Orientation of Quartz in Metamorphic Rocks from the Bergell Alps

Crystal preferred orientation of 47 samples of quartzite and eight samples of associated marbles from the Bergell Alps have been analyzed with time-of-flight neutron diffraction and EBSD. The results show a clear distinction of texture types for quartzites transformed from Triassic sandstones and quartz layers in gneiss. Textures of Triassic quartzites are overall weak and display a maximum of c-axes perpendicular to the foliation or a crossed girdle perpendicular to the lineation. Pole figures for positive rhombs {10 1 ¯ 1} show a maximum perpendicular to the foliation and negative rhombs {01 1 ¯ 1} generally display a minimum. Based on polycrystal plasticity models this texture type can be attributed to a combination of basal and rhombohedral slip. Asymmetry of the distributions is attributed to simple shear and local strain heterogeneities. The relatively weak texture is partially caused by muscovite limiting dislocation motion and grain growth, as well as adjacent layers of marble that accommodate significant strain. Most quartz layers in gneiss, including mylonites, display a texture with a-axes parallel to the lineation and a c-axis maximum in the intermediate fabric direction. This texture type can be attributed to dominant prismatic slip. Many samples are recrystallized and recrystallization appears to strengthen the deformation texture. The study shows good agreement of neutron diffraction and EBSD. Neutron diffraction data average over larger volumes and maximum pole densities are generally lower and more representative for the bulk material. With EBSD the microstructure and mechanical twinning can be quantified.

54 ENVIRONMENTAL SCIENCES↗

Epithermal Neutron Activation Analysis of Some Geological Samples of Different Origin

Instrumental Epithermal Neutron Activation Analysis was used to investigate the distribution of six major elements and 34 trace elements in a set of eight igneous and metamorphic rocks collected from Carpathian and Macin Mountainsas well as unconsolidated sediments collected from anoxic zone of the Black Sea. All experimental data were interpreted within the Upper Continental Core and Mid Ocean Ridge Basalt model system that allowed getting more information concerning samples origin as well as the environmental peculiarities.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Thermal-chemical-mechanical feedback during fluid-rock interactions: Implications for chemical transport and scales of equilibria in the crust

Our research evaluates the hypothesis that feedback amongst thermal-chemical-mechanical processes operative in fluid-rock systems alters the fluid flow dynamics of the system which, in turn, affects chemical transport and temporal and spatial scales of equilibria, thus impacting the resultant mineral textural development of rocks. Our methods include computational experimentation and detailed analyses of fluid-infiltrated rocks from well-characterized terranes. This work focuses on metamorphic rocks and hydrothermal systems where minerals and their textures are utilized to evaluate pressure (P), temperature (T), and time (t) paths in the evolution of mountain belts and ore deposits, and to interpret tectonic events and the timing of these events. Our work on coupled processes also extends to other areas where subsurface flow and transport in porous media have consequences such as oil and gas movement, geothermal system development, transport of contaminants, nuclear waste disposal, and other systems rich in fluid-rock reactions. Fluid-rock systems are widespread in the geologic record. Correctly deciphering the products resulting from such systems is important to interpreting a number of geologic phenomena. These systems are characterized by complex interactions involving time-dependent, non-linear processes in heterogeneous materials. While many of these interactions have been studied in isolation, they are more appropriately analyzed in the context of a system with feedback. When one process impacts another process, time and space scales as well as the overall outcome of the interaction can be dramatically altered. Our goals to test this hypothesis are: to develop and incorporate algorithms into our 3D heat and mass transport code to allow the effects of feedback to be investigated numerically, to analyze fluid infiltrated rocks from a variety of terranes at differing P-T conditions, to identify subtle features of the infiltration of fluids and/or feedback, and to quantify the importance of feedback in complex fluid-rock systems and its affects on time and space scales and rates of reaction. We have made significant contributions toward understanding feedback and its impacts by numerical experimentation using 3D computational modeling of fluid-rock systems and by chemical and textural analyses of fluid-infiltrated rocks.

58 GEOSCIENCES↗

Fracture Propagation and Permeability Change under Poro-thermoelastic Loads & Silica Reactivity in Enhanced Geothermal Systems

Geothermal energy is recovered by circulating water through heat exchange areas within a hot rock mass. Geothermal reservoir rock masses generally consist of igneous and metamorphic rocks that have low matrix permeability. Therefore, cracks and fractures play a significant role in extraction of geothermal energy by providing the major pathways for fluid flow and heat exchange. Therefore, knowledge of the conditions leading to formation of fractures and fracture networks is of paramount importance. Furthermore, in the absence of natural fractures or adequate connectivity, artificial fractures are created in the reservoir using hydraulic fracturing. Multiple fractures are preferred because of the large size necessary when using only a single fracture. Although the basic idea is rather simple, hydraulic fracturing is a complex process involving interactions of high pressure fluid injections with a stressed hot rock mass, mechanical interaction of induced fractures with existing natural fractures, and the spatial and temporal variations of in-situ stress. As a result, it is necessary to develop tools that can be used to study these interactions as an integral part of a comprehensive approach to geothermal reservoir development, particularly enhanced geothermal systems. In response to this need we have developed advanced poro-thermo-chemo-mechanical fracture models for rock fracture research in support of EGS design. The fracture propagation models are based on a regular displacement discontinuity formulation. The fracture propagation studies include modeling interaction of induced fractures. In addition to the fracture propagation studies, two-dimensional solution algorithms have been developed and used to estimate the impact of pro-thermo-chemical processes on fracture permeability and reservoir pressure. Fracture permeability variation is studied using a coupled thermo-chemical model with quartz reaction kinetics. The model is applied to study quartz precipitation/dissolution, as well as the variation in fracture aperture and pressure. Also, a three-dimensional model of injection/extraction has been developed to consider the impact poro- and thermoelastic stresses on fracture slip and injection pressure. These investigations shed light on the processes involved in the observed phenomenon of injection pressure variation (e.g., in Coso), and allow the assessment of the potential of thermal and chemical stimulation strategies.

15 GEOTHERMAL ENERGY↗

Update on NEA-TDB Database Development and Database Formatting Tool

This progress report (Level 4 Milestone Number M4SF-21LL010302062) summarizes research conducted at Lawrence Livermore National Laboratory (LLNL) within the Crystalline International Collaborations Activity Number SF-21LL01030206. The activity is focused on our long-term commitment of engaging our partners in international nuclear waste repository research. This includes participation in the Nuclear Energy Agency Thermochemical Database (NEA TDB) Project (Cindy Atkins-Duffin) and development of methodologies for integrating US and international thermodynamic databases for use in SFWST Generic Disposal System Assessment (GDSA) efforts. LLNL is supporting the overall objectives of the Disposal Research (DR) Crystalline International Collaborations Research and Development (R&D) control account. The objective of this control account is to advance our understanding of long-term disposal of spent fuel in crystalline rocks (including both granitic and metamorphic rocks) and to develop necessary experimental and computational capabilities to evaluate various disposal concepts in such media.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Identifying Rare Earth Elements and Thorium and Uranium in Iron Oxide–Apatite Deposit of Gazestan Bafgh, Southeast of Iran

The Gazestan magnetite-apatite deposit is one of Kiruna-type deposits located 78 km from Bafgh in the province of Yazd, in the Bafgh Posht-e-Badam district, southeast of Iran. In the mining region of Bafgh, volcanic rocks and Precambrian volcano-sedimentary are the main host of iron-apatite deposits. Iron deposits are essentially located in Bafgh region inside the green acidic metamorphic rocks. Volcanic rocks are basically rhyolite and rhyodacitic and the sedimentary units are mostly made of dolomite. Rock units of the region belong to the Rizzo series. The Bafgh apatite compounds are fluoride-type and seen in the monazite mineral. The similarity of the rare earth elements pattern in all samples indicates the magma source. The most amount of rare earth elements in the Gazestan deposit include 7766.25 ppm and the most amount of Th is equal to 65.1 ppm and U is equal to 8.33 ppm. The most amount of P2O5 s equal to 26.5 wt% and Fe is equal to 61.3 wt%. Also, it can be concluded that due to their high correlation with rare earth elements, the deposit is of Uranium Thorium-bearing type.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Using vanadium in spinel as a sensor of oxygen fugacity in meteorites: Applications to Mars, Vesta, and other asteroids.

Some meteorites do not contain mineral assemblages required to apply traditional oxy-barometers. Here we introduce a technique using vanadium X-ray absorption features in spinels to characterize the oxygen fugacity of meteoritic dunites, pyroxenites, and chondrites. Igneous and metamorphic rocks commonly contain a mineral assemblage that allows oxygen fugacity to be calculated or constrained such as FeTi oxides, olivine-opx-spinel, or some other oxybarometer. Some rocks, however, contain a limited mineral assemblage and do not provide constraints on fO{sub 2} using mineral equilibria. Good examples of the latter are orthopyroxenites or dunites, such as diogenites, ALH 84001, chassignites, or brachinites. In fact it is no surprise that the fO{sub 2} of many of these samples is not well known, other than being 'reduced' and below the metal saturation value. In order to bridge this gap in our understanding, we have initiated a study of V in chromites in natural meteorite samples. Because the V pre-edge peak intensity and energy in chromites varies with fO{sub 2}, and this has been calibrated over a large fO{sub 2} range, we can apply this relation to rocks for which we otherwise have no fO{sub 2} constraints.

79 ASTRONOMY AND ASTROPHYSICS↗

Preferred orientation of phyllosilicates: Comparison of fault gouge, shale and schist

Samples of fault gouge from the San Andreas Fault drill hole (SAFOD), a shale from the North Sea sedimentary basin and schists from metamorphic rocks in the Alps have been analyzed with high energy synchrotron X-rays to determine preferred orientation of mica and clay minerals. The method relies on obtaining 2D diffraction images which are then processed with the crystallographic Rietveld method, implemented in the software MAUD, allowing for deconvolution of phases and extraction of their orientation distributions. It is possible to distinguish between detrital illite/muscovite and authigenic illite/smectite, kaolinite and chlorite, and muscovite and biotite, with strongly overlapping peaks in the diffraction pattern. The results demonstrate that phyllosilicates show large texture variations in various environments, where different mechanisms produce the rock microfabrics: fault gouge fabrics are quite weak and asymmetric with maxima for (001) in the range of 1.5-2.5 multiples of random distribution (m.r.d.). This is attributed to heterogeneous deformation with randomization, as well as dissolution-precipitation reactions. Shale fabrics have maxima ranging from 3 to 9 m.r.d. and this is due to sedimentation and compaction. The strongest fabrics were observed in metamorphic schists (10-14 m.r.d.) and developed by deformation as well as recrystallization in a stress field. In the analyzed samples, fabrics of co-existing quartz are weak. All phyllosilicate textures can be explained by orientation of (001) platelets, with no additional constraints on a-axes.

43 PARTICLE ACCELERATORS↗

The clumped-isotope geochemistry of exhumed marbles from Naxos, Greece

Exhumation and accompanying retrograde metamorphism alter the compositions and textures of metamorphic rocks through deformation, mineral–mineral reactions, water–rock reactions, and diffusion-controlled intra- and inter-mineral atomic mobility. Here, we demonstrate that these processes are recorded in the clumped- and single-isotope (δ 13 C and δ 18 O) compositions of marbles, which can be used to constrain retrograde metamorphic histories. We collected 27 calcite and dolomite marbles along a transect from the rim to the center of the metamorphic core-complex of Naxos (Greece), and analyzed their carbonate single- and clumped-isotope compositions. The majority of Δ 47 values of whole-rock samples are consistent with exhumation- controlled cooling of the metamorphic complex. However, the data also reveal that water–rock interaction, deformation driven recrystallization and thermal shock associated with hydrothermal alteration may considerably impact the overall distribution of Δ 47 values. We analyzed specific carbonate fabrics influenced by deformation and fluid–rock reaction to study how these processes register in the carbonate clumped-isotope system. Δ 47 values of domains drilled from a calcite marble show a bimodal distribution. Low Δ 47 values correspond to an apparent temperature of 260 °C and are common in static fabrics; high Δ 47 values correspond to an apparent temperature of 200 °C and are common in dynamically recrystallized fabrics. We suggest that the low Δ 47 values reflect diffusion-controlled isotopic reordering during cooling, whereas high Δ 47 values reflect isotopic reordering driven by dynamic recrystallization. We further studied the mechanism by which dynamic recrystallization may alter Δ 47 values by controlled heating experiments. Results show no significant difference between laboratory reactions rates in the static and dynamic fabrics, consistent with a mineral-extrinsic mechanism, in which slip along crystal planes was associated with atomic-scale isotopic reordering in the calcite lattice. An intrinsic mechanism (enhanced isotopic reordering rate in deformed minerals) is contraindicated by these experiments. We suggest that Δ 47 values of dynamically recrystallized fabrics that form below the diffusion-controlled blocking-temperature for calcite constrain the temperature of deformation. We find that Δ 47 -based temperatures of static fabrics from Naxos marbles are ~60–80 °C higher than commonly observed in slowly cooled metamorphic rocks, and would suggest cooling rates of ~10 5 °CMyr -1 . A similar thermal history is inferred for dolomite marbles from the core vicinity, which preserve apparent temperatures up to 200 °C higher than a typical blocking temperature (~300 °C). This finding could be explained by a hydrothermal event driving a brief thermal pulse and locally resetting Δ 47 values. Rapid cooling of the core-complex region is consistent with a compilation of published cooling ages and a new apatite U–Th/He age, associating the thermal event with the emplacement of a granodiorite pluton at ~12 Ma.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The high-pressure dimension in earth and planetary science

The bulk of our planet is hidden from view, within the earth, under high pressures and temperatures. The behavior of this material dictates the formation, evolution, and present state of the solid earth. Recent geophysical and geochemical studies of the planet present us with a rich array of large-scale processes and phenomena that are not fully understood. These range from the fate of deeply subducted slabs and the origin of plumes, to the nature of the core-mantle boundary; the differentiation of materials to form the present-day crust, mantle, and core; the distribution of trace elements; and the uptake and recycling of volatiles throughout earth's history. Addressing these questions experimentally has a long history, but it is only recently that the entire range of pressures that prevail within the earth could be produced in the laboratory and the materials probed with the necessary tools. Experiments have demonstrated that, under these extreme conditions, the physical and chemical behavior of materials can be profoundly altered, causing new and unforeseen reactions and giving rise to structural, elastic, electronic, and magnetic transitions not observed in rocks and minerals in the near-surface environment. Resolving new issues that have arisen requires an integrated approach involving subfields that include seismology, geochemistry, petrology, and geodynamics, as well as theoretical and experimental high-pressure mineral sciences. The collection of feature articles that follows, which were presented at a recent symposium, highlights an array of new developments in high-pressure geoscience. In ultrahigh-pressure metamorphic rocks, solid and fluid inclusions in phenocrysts contain rich information on deep-mantle processes. The structure, texture, strain, chemistry, and exsolution of these micrometer- to nanometer-sized inclusions indicate the formation environment of these rocks and contain rich information about the relevant physical and chemical processes. Diamonds, coesite, and new minerals have been discovered as micro-nano inclusions, in concert with in situ high pressure-temperature (P-T) experiments that define the conditions of formation. The emerging field of micro-to-nano mineralogy may take center stage in the geosciences with new enabling micro analytical techniques, including synchrotron x-ray nanoprobes, synchrotron infrared probes, electron microscopy, focused ion beam methods, and nanosecondary ion microscopy for analyzing experimental and natural specimens. Ultrahigh pressure, in the context of metamorphism, refers to the previously unexpectedly high pressure signature in recovered rocks on the earth's surface. However, at greater depths in the mantle the pressure is much higher, but no samples are available. Instead, studies must be conducted in situ by seismology and other geophysical observations, and the results must be compared with mineral data obtained either in the laboratory or from computational theory. There is growing evidence for lateral variations in temperature and hydration in the upper mantle, gained from using long-period seismic waveforms together with new, physically constrained inversion methods. In addition, systematic ultrasonic measurements of mantle minerals as a function of pressure and temperature are providing crucial wave velocity information for comparison. The origin of the paradoxical deep-focus earthquake is examined from the standpoint of the experimental findings of shear instability induced by phase transitions and dehydration. Deeper in the mantle, many long-standing seismic anomalies in the D{double_prime} layer immediately above the core-mantle boundary can now be understood with the discovery of MgSiO3 post-perovskite at pressures >100 GPa. The post-perovskite phase provides new insight for modeling the metastable superplume recently inferred from seismology and for understanding the topology of the top of the D{double_prime} layer by using three-dimensional simulations of mantle convection. The earth's core plays a central role in the evolution and dynamic processes within the planet; however, the origin of some of its most fundamental properties, for example, the temperature, chemical composition, mineral phases, elasticity, magnetism, and formation of the core, remains elusive. Indeed, new study of earth's core is uniting observational, theoretical, and experimental geophysics, thereby enriching each discipline through interactions and feedback. For instance, geophysical observations are uncovering surprising inner-core properties such as seismic anisotropy, layering, and superrotation. Studies of candidate component materials of the core include first-principles calculations and direct experiments on iron and its alloys. High energy-resolution, nuclear-resonant x-ray spectroscopy provides information on magnetism, as well as on the phonon density of states, bulk longitudinal and shear wave velocities, and thermodynamic properties.

58 GEOSCIENCES↗

Multi-scale characterization of pore evolution in a combustion metamorphic complex, Hatrurim basin, Israel: Combining (ultra) small-angle neutron scattering and image analysis

Backscattered scanning electron micrograph and ultra small- and small-angle neutron scattering data have been combined to provide statistically meaningful data on the pore/grain structure and pore evolution of combustion metamorphic complexes from the Hatrurim basin, Israel. Three processes, anti-sintering roughening, alteration of protolith (dehydration, decarbonation, and oxidation) and crystallization of high-temperature minerals, occurred simultaneously, leading to significant changes in observed pore/grain structures. Pore structures in the protoliths, and in lowand high-grade metamorphic rocks show surface (Ds) and mass (Dm) pore fractal geometries with gradual increases in both Ds and Dm values as a function of metamorphic grade. This suggests that increases in pore volume and formation of less branching pore networks are accompanied by a roughening of pore/grain interfaces. Additionally, pore evolution during combustion metamorphism is also characterized by reduced contributions from small-scale pores to the cumulative porosity in the high-grade rocks. At high temperatures, small-scale pores may be preferentially closed by the formation of high-temperature minerals, producing a rougher morphology with increasing temperature. Alternatively, large-scale pores may develop at the expense of small-scale pores. These observations (pore fractal geometry and cumulative porosity) indicate that the evolution of pore/grain structures is correlated with the growth of high-temperature phases and is a consequence of the energy balance between pore/grain surface energy and energy arising from heterogeneous phase contacts. The apparent pore volume density further suggests that the localized time/temperature development of the high-grade Hatrurim rocks is not simply an extension of that of the low-grade rocks. The former likely represents the "hot spots (burning foci)" in the overall metamorphic terrain while the latter may represent contact aureoles.

Wang, Hsiu-Wen↗

Subduction, Underplating, and Return Flow Recorded in the Cycladic Blueschist Unit Exposed on Syros, Greece

Exhumed high-pressure/low-temperature (HP/LT) metamorphic rocks provide insights into deep (~20–70 km) subduction interface dynamics. On Syros Island (Cyclades, Greece), the Cycladic Blueschist Unit preserves blueschist-to-eclogite facies oceanic- and continental-affinity rocks that record the structural and thermal evolution linked to Eocene subduction. Despite decades of research, the metamorphic and deformation history (P-T-D) and timing of subduction and exhumation are matters of ongoing discussion. We suggest that Syros comprises three coherent tectonic slices and that each slice underwent subduction, underplating, and syn-subduction return flow along similar P-T trajectories, but at progressively younger times. Subduction and exhumation are distinguished by lineations and ductile fold axis orientations, and are kinematically consistent with previous studies that document top-to-the-S-SW shear (prograde-to-peak subduction), top-to-the-NE shear (blueschist facies exhumation), and then E-W coaxial stretching (greenschist facies exhumation). Amphibole zonations record cooling during decompression, indicating return flow above a cold slab. Multi-mineral Rb-Sr isochrons and compiled metamorphic geochronology show that the three slices record distinct stages of peak subduction (53–52, ~50, and 45 Ma) that young with structural depth. Retrograde blueschist and greenschist facies fabrics span ~50–40 and ~43–20 Ma, respectively, and also young with structural depth. Synthesized data sets support a revised tectonic framework for Syros, involving subduction of structurally distinct coherent slices and simultaneous return flow of previously accreted tectonic slices in the subduction channel shear zone. Distributed, ductile, dominantly coaxial return flow in an Eocene-Oligocene subduction channel proceeded at rates of ~1.5–5 mm/yr and accommodated ~80% of the total exhumation of this HP/LT complex.

58 GEOSCIENCES↗

Non-cratonic Diamonds from UHP Metamorphic Terranes, Ophiolites and Volcanic Sources

The discovery of diamonds in metamorphic rocks of continental affinities occurred shortly after the discovery of coesite in similar rocks. These important discoveries led to a revolution in our understanding of the subduction and exhumation of continental materials and the establishment of a new discipline, ultra-high-pressure metamorphism (UHPM). After these discoveries more ultra-high pressure (UHP) minerals were found and dozens of UHPM terranes were established. Diamond is a remarkable material which is chemically inert and stable over geological timescales making it the perfect “geological container” where gas, fluid, and solid inclusions can be preserved. Moreover, its presence is indicative of specific pressure and temperature conditions which implie subduction to a minimum depth of ~120 km. The inclusions trapped inside these diamonds can shed light on the composition, redox state, and evolution of the fluids related to UHPM diamond formation while the carbon isotope ratios of the diamond itself can inform us about the source of carbon. The purpose of this review is to provide a brief history on the discovery of microdiamonds starting with work that began in the mid-1960s in Kokchetav massif, Kazakhstan, through to the present day. Particular attention will be on more recent micro-diamond discoveries in the last decade. The current state of understating of the mechanisms of UPHM diamond formation, the misidentification of microdiamonds due to contamination from sample extraction/preparation, and the future of UHPM diamond research are discussed. The paper also considers the controversial topic of the occurrence of lonsdaleite within the population of microdiamonds from UHPM terranes as well as recently reported ophiolite- and volcanic-hosted diamonds.

58 GEOSCIENCES↗