Search NASA⌕ Search

SEARCH · Search NASA

Results for “METHACRYLIC ACID ESTERS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Influence of amine-grafted multi-walled carbon nanotubes on physical and rheological properties of PMMA-based nanocomposites

In this work, poly(methyl methacrylate) (PMMA) was grafted onto amine treated multi-walled carbon nanotubes (NH-MWNTs) and the physical and rheological properties of the NH-MWNTs-g-PMMA nanocomposites were investigated. The graft reaction of NH-MWNTs and the PMMA matrix was confirmed from the change of the N{sub 1S} peaks, including those of amine oxygen and amide oxygen, by X-ray photoelectron spectroscopy (XPS). The thermal and mechanical properties of the NH-MWNT-g-PMMA nanocomposites were enhanced by the graft reaction between NH-MWNTs and PMMA matrix. In addition, the viscosity of the nanocomposites was increased with the addition of NH-MWNTs. Storage (G') and loss modulus (G'') were significantly increased by increase in the NH-MWNT content compared to acid-treated MWNTs/PMMA nanocomposites. This increase was attributed to the strong interaction by the grafting reaction between NH-MWNTs and the PMMA matrix. - Graphical abstract: This describes the increase of mechanical properties in NH-MWNTs-g-PMMA hybrid composites with different NH-MWNT contents. Highlights: > Aminized carbon nanotubes are used as reinforcement for poly(methylmethacrylate). > Poly(methylmethacrylate) is grafted on aminized carbon nanotubes by thermal reaction. > Grafting of carbon nanotubes and polymer provide enhanced physical properties. > It was due to the strong interaction between carbon nanotubes and polymer matrix.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Growth of graphene underlayers by chemical vapor deposition

We present a simple and very convincing approach to visualizing that subsequent layers of graphene grow between the existing monolayer graphene and the copper catalyst in chemical vapor deposition (CVD). Graphene samples were grown by CVD and then transferred onto glass substrates by the bubbling method in two ways, either direct-transfer (DT) to yield poly (methyl methacrylate) (PMMA)/graphene/glass or (2) inverted transfer (IT) to yield graphene/PMMA/glass. Field emission scanning electron microscopy (FE-SEM) and atomic force microscopy (AFM) were used to reveal surface features for both the DT and IT samples. The results from FE-SEM and AFM topographic analyses of the surfaces revealed the underlayer growth of subsequent layers. The subsequent layers in the IT samples are visualized as 3D structures, where the smaller graphene layers lie above the larger layers stacked in a concentric manner. The results support the formation of the so-called “inverted wedding cake” stacking in multilayer graphene growth.

36 MATERIALS SCIENCE↗

Evaluation of surface damage on organic materials irradiated with Ar cluster ion beam

The sputtering yields of organic materials under large cluster ion bombardment are much higher than those under conventional monomer ion bombardment. The sputtering rate of arginine remains constant with fluence for an Ar cluster ion beam, but decreases with fluence for Ar monomer. Additionally, because Ar cluster etching induces little damage, Ar cluster ion can be used to achieve molecular depth profiling of organic materials. In this study, we evaluated the damage to poly methyl methacrylate (PMMA) and arginine samples irradiated with Ar atomic and Ar cluster ion beams. Arginine samples were analyzed by secondary ion mass spectrometry (SIMS) and PMMA samples were analyzed by X-ray photoelectron spectroscopy (XPS). The chemical structure of organic materials remained unchanged after Ar cluster irradiation, but was seriously damaged. These results indicated that bombardment with Ar cluster ions induced less surface damage than bombardment with Ar atomic ion. The damage layer thickness with 5 keV Ar cluster ion bombardment was less than 1 nm.

36 MATERIALS SCIENCE↗

Preparation and formation mechanism of three-dimensionally ordered macroporous (3DOM) MgO, MgSO{sub 4}, CaCO{sub 3}, and SrCO{sub 3}, and photonic stop band properties of 3DOM CaCO{sub 3}

Three-dimensionally ordered macroporous (3DOM) magnesium (Mg) oxide (MgO), MgSO{sub 4}, calcium (Ca) carbonate (CaCO{sub 3}), and strontium (Sr) carbonate (SrCO{sub 3}) were prepared using a colloidal crystal of polymer spheres as a template. Ethanol or ethanol-water solution of metal salts (acetate or nitrate) and citric acid was infiltrated into the void of the colloidal crystal template of a monodispersed poly(methyl methacrylate) (PMMA) sphere. Heating of this PMMA-metal salt-citric acid composite produced the desired well-ordered 3DOM materials with a high pore fraction, which was confirmed by powder X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and ultraviolet-visible (UV-vis) diffuse reflectance spectra. The presence of citric acid is crucial for production of the 3DOM structures. Reaction of citric acid with metal salt produces metal citrate solid in the void of PMMA spheres, which is necessary to maintain the 3DOM structure during the calcination process. 3DOM CaCO{sub 3} shows opalescent colors because of it's photonic stop band properties. - Graphical abstract: Well-ordered 3-dimensionally ordered macroporous MgO, MgSO{sub 4}, CaCO{sub 3}, and SrCO{sub 3} materials were obtained in a high pore fraction. Highlights: > An easy preparation method of 3D ordered macroporous (3DOM) MgO, MgSO{sub 4}, CaCO{sub 3}, and SrCO{sub 3} materials. > Their structural characterization. > Their formation mechanism. > Photonic properties of 3DOM CaCO{sub 3}.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Physical properties of agave cellulose graft polymethyl methacrylate

The grafting polymerization of methyl methacrylate and Agave cellulose was prepared and their structural analysis and morphology were investigated. The grafting reaction was carried out in an aqueous medium using ceric ammonium nitrate as an initiator. The structural analysis of the graft copolymers was carried out by Fourier transform infrared and X-ray diffraction. The graft copolymers were also characterized by field emission scanning electron microscopy (FESEM). An additional peak at 1732 cm{sup −1} which was attributed to the C=O of ester stretching vibration of poly(methyl methacrylate), appeared in the spectrum of grafted Agave cellulose. A slight decrease of crystallinity index upon grafting was found from 0.74 to 0.68 for cellulose and grafted Agave cellulose, respectively. Another evidence of grafting showed in the FESEM observation, where the surface of the grafted cellulose was found to be roughed than the raw one.

36 MATERIALS SCIENCE↗

Preparation of Avermectin/Grafted CMC Nanoparticles and Their Sustained Release Performance

Avermectin (AVM) is a highly efficient pesticide against a variety of insects and is widely used in agriculture. However, it is susceptible to oxidation and photolysis, resulting in instability under UV irradiation and a short half-life. Herein, sodium carboxymethyl cellulose (CMC) was grafted by styrene (St), Methyl methacrylate (MMA) and butyl acrylate (BA) respectively to prepare grafted polymer nanoparticles in application for AVM sustained released. And the influence of different grafted monomer and the grafted rate on the AVM/grafted polymer nanoparticles performance was discussed. The larger the grafted rate of St was, the larger the particle size of AVM/grafted polymer nanoparticles had with a higher drug loading rate and stronger resistance to ultraviolet light. Besides, the particle size, drug loading rate and the ability of anti-ultraviolet light of grafted CMC emulsion was also influenced by the modifying agent. While the concentration of AVM was kept the same, the acrylic esters (MMA and BA) grafted emulsion have smaller particle sizes with higher drug loading rates and stronger anti-ultraviolet ability comparing to styrene (St) grafted emulsion. The effect of different amount of St and different monomer grafted on the sustained release performance of AVM/grafted polymer was also investigated. As the grafted rate of St increased, the release rate became smaller. The release speed has a sequence of CMC-g-PBA > CMC-g-PS > CMC-g-PMMA when CMC grafted with different monomer. Their sustained release curves can be described by Korsmeyer-Peppas equation. Finally, the insect toxicity test showed that insecticide toxicity against diamondback moth (Plutella xylostella L.) has no apparent difference among the AVM and AVM/grafted polymer nanoparticles indicating that AVM/grafted polymer nanoparticles can reduce the amount of organic solution used for dissolution and prolonged its service life without decreasing its insecticide toxicity.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Chain Transfer of Vegetable Oil Macromonomers in Acrylic Solution Copolymerization

Use of vegetable oil macromonomers (VOMMs) as comonomers in emulsion polymerization enables good film coalescence without the addition of solvents that constitute volatile organic compounds (VOCs). VOMMs are derived from renewable resources and offer the potential of post-application crosslinking via auto-oxidation. However, chain transfer reactions of VOMMs with initiator and/or polymer radicals during emulsion polymerization reduce the amount of allylic hydrogen atoms available for primary auto-oxidation during drying. Vegetable oils and derivatives were reacted in combination with butyl acrylate and methyl methacrylate via solution polymerization. The copolymerization was monitored using in situ infrared spectroscopy to determine the extent of chain transfer. 1H NMR spectroscopy was used to determine the loci of chain transfer and the molecular weight characteristics of the polymers were characterized by SEC. Solution polymerization was utilized to minimize temperature fluctuations and maintain polymer solubility during the initial characterization.

08 HYDROGEN↗

An Investigation on Transparency and Mechano-Acoustic Properties of Poly Methyl Methacrylate/Polycarbonate Based Nanocomposites

The main goal of this paper was to investigate transparency and mechano-acoustic properties of poly methyl methacrylate (PMMA)/polycarbonate (PC) based nanocomposites, reinforced with silica (SiO{sub 2}), zinc dioxide (ZnO), and titanium dioxide (TiO{sub 2}) nanoparticles. For this purpose, morphological, transparency, acoustical and mechanical tests were carried out on the specimens, prepared by melt-compounding method in a twin-screw extruder. The morphological test results confirmed uniform dispersion of the nanoparticles in the polymer matrix. The results also revealed that transparency of the PC and PMMA nanocomposites, characterized by the degree of light transmittance, was decreased by adding 0.3 wt% of the nanoparticles. Also, tensile modulus of the nanocomposite specimens was higher than that of neat PC and PMMA. Unlike the neat PC specimens, tensile strength showed a decrease in PMMA specimens. The presence of nanoparticles in the composites decreased mobility of polymer chains and consequently, reduced elongation at break in the specimens. After surface roughening process, noise absorption coefficient in PC/PMMA nanocomposite specimens (PCSI3-R, PMSI3-R, and PMZN3-R) showed a higher absorption coefficient than the other specimens in the dominant frequency of traffic noise (500 Hz). As conclusion, roughening the surface of materials would be one of the most important factors enhancing the absorption coefficient of some of the nanocomposites in the middle frequency. The rough surface of particles in the base matrix increases the absorption coefficient of the materials, especially in the frequency of 500 Hz, as the dominant frequency of noise traffic. The suggested materials are predestinated to be appropriate in building industry, particularly in the structure of noise barriers.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Passively Q-switched erbium-doped fiber laser using quantum dots CdSe embedded in polymer film as saturable absorber

We demonstrate a passively Q-switched erbium doped fiber laser (EDFL) based on quantum dots (QD) CdSe as a saturable absorber (SA). The synthesized CdSe powder was embedded into a poly(methyl methacrylate) (PMMA) using emulsion polymerization process. The film is sandwiched between two fiber connector via an adapter to form a fiber-compatible SA device. By integrating the SA device into the EDFL ring cavity, the stable Q-switched operation is achieved at 1559.35 nm as the pump power is varied within 30–118 mW. The laser has a pump threshold of 20.4 mW. The pulse repetition rate shows an increasing trend from 33.2 to 68.45 kHz, whereas the pulse width exhibits a decreasing trend from 10.04 to 4.30 μs as the pump power is increased from 30 to 118 mW. The highest pulse energy of 11.83 nJ is obtained at a pump power of 118 mW. These results indicate that QD CdSe is a promising SA for Q-switching laser operation.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Cobalt and manganese complexes with redox-active ligands in polymerization of acrylonitrile and methyl methacrylate

The influence of bis[4,6-di-tert-butyl-N-(2,6-dimethylphenyl)-o-iminobenzosemiquinonato]cobalt(II) and 4,6-di-tert-butyl-N-(2,6-diisopropylphenyl)-o-iminobenzosemiquinonato]-[4,6-di-tert-butyl-N-(2,6-diisopropylphenyl)-o-amidophenolate]manganese(III) on polymerization of methyl methacrylate and acrylonitrile in the presence of azobisisobutyronitrile (as a traditional radical initiator) and alkyl halides (used for initiation of controlled atom transfer radical polymerization process) was studied. The effect of the nature of the activating agents (amines) and the temperature conditions on the overall polymerization rate of the indicated monomers, as well as molecular weight characteristics of the synthesized polymers, were analyzed. The optimal conditions for the synthesis of polyacrylonitrile and poly(methyl methacrylate) with a relatively narrow molecular weight distribution were selected.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Stabilization of dinitrosyl iron complexes under matrix isolation conditions: solvent and polymer effects on the synthesis of composites based on poly(methyl methacrylate) and iron complexes [Fe{sub 2}(μ-NCS-R){sub 2}(NO){sub 4}]

Homogeneous composites based on poly(methyl methacrylate) and its copolymers with methacrylic acid and on the nitrosyl iron complexes with 2-mercaptobenzimidazole and 2-mercaptobenzthiazole were synthesized. An analysis of the experimental data obtained by the methods of small-angle X-ray diffraction and SQUID magnetometry in combination with the results of quantum chemical calculations showed that the nitrosyl complexes did not retain their initial binuclear structure under the matrix isolation conditions: some complexes decompose to mononuclear ones. The percentage ratio of the dimers and monomers depends on the fraction of the methacrylic acid copolymer in the polymeric matrix and is almost independent of the type of thiol ligand in the iron complex.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis of fluorescent coumarin-labeled organic glass

Polymerization of methyl methacrylate in bulk in the presence of 4-ethynylcoumarin and 4-butadiynylcoumarin (AIBN, 60 °C) leads to the formation of fluorescent polymers. A hypsochromic shift of fluorescence band maxima of polymer solutions is observed in dichloromethane. It was suggested using the quantum chemical calculations that 4-ethynylcoumarin is attached to the macroradical via the terminal carbon atom of the ethynyl group. The samples of fluorescent organic glasses were prepared. It was established that the addition of coumarins do not influence the microhardness of organic glass.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Porous Microcapsule-Based Regenerating Superhydrophobic Coating on 304L SS and Its Corrosion Properties

We report fabrication of a regenerating superhydrophobic coating on 304L stainless steels, with superior corrosion resistance, using porous microcapsules made of calcium hydroxide as a core and a polymeric shell consisting of ethyl cellulose and poly methyl methacrylate. The synthesized microcapsules are characterized using optical, atomic force and scanning electron microscopic techniques, x-ray diffraction, Fourier transform infrared spectroscopy and immersion tests. The diameter of porous and permeable microcapsules ranges from 2 to 20 μm. On immersion of the coated surface in sodium stearate solution, the calcium hydroxide from the core diffuses through the pores of microcapsules and forms nanocrystalline hydrophobic calcium stearate needles pointing outward that repel water molecules. The maximum water contact angle obtained was 155.7° ± 2.05°. The micro-nanoscale roughness of the surface was evident from the AFM measurement. The cross-hatch tape adhesion test confirmed the strong adherence of the superhydrophobic coating. On damage of the superhydrophobic coating, the regeneration is achieved by immersing it in sodium stearate solution for 6 h where a 10° increase in contact angle is observed. Electrochemical studies in 0.1 M NaCl showed significant decrease in the passive current density and a delayed pitting, confirming better corrosion resistance of the coating in chloride environment.

36 MATERIALS SCIENCE↗

KNK437, abrogates hypoxia-induced radioresistance by dual targeting of the AKT and HIF-1{alpha} survival pathways

Highlights: Black-Right-Pointing-Pointer KNK437, a benzylidene lactam compound, is a novel radiosensitizer. Black-Right-Pointing-Pointer KNK437 inhibits AKT signaling and abrogates the accumulation of HIF-1{alpha} under hypoxia. Black-Right-Pointing-Pointer KNK437 abrogates hypoxia induced resistance to radiation. -- Abstract: KNK437 is a benzylidene lactam compound known to inhibit stress-induced synthesis of heat shock proteins (HSPs). HSPs promote radioresistance and play a major role in stabilizing hypoxia inducible factor-1{alpha} (HIF-1{alpha}). HIF-1{alpha} is widely responsible for tumor resistance to radiation under hypoxic conditions. We hypothesized that KNK437 sensitizes cancer cells to radiation and overrides hypoxia-induced radioresistance via destabilizing HIF-1{alpha}. Treatment of human cancer cells MDA-MB-231 and T98G with KNK437 sensitized them to ionizing radiation (IR). Surprisingly, IR did not induce HSPs in these cell lines. As hypothesized, KNK437 abrogated the accumulation of HIF-1{alpha} in hypoxic cells. However, there was no induction of HSPs under hypoxic conditions. Moreover, the proteosome inhibitor MG132 did not restore HIF-1{alpha} levels in KNK437-treated cells. This suggested that the absence of HIF-1{alpha} in hypoxic cells was not due to the enhanced protein degradation. HIF-1{alpha} is mainly regulated at the level of post-transcription and AKT is known to modulate the translation of HIF-1{alpha} mRNA. Interestingly, pre-treatment of cells with KNK437 inhibited AKT signaling. Furthermore, down regulation of AKT by siRNA abrogated HIF-1{alpha} levels under hypoxia. Interestingly, KNK437 reduced cell survival in hypoxic conditions and inhibited hypoxia-induced resistance to radiation. Taken together, these data suggest that KNK437 is an effective radiosensitizer that targets multiple pro-survival stress response pathways.

63 RADIATION, THERMAL, AND OTHER ENVIRON. POLLUTAN↗

Adsorption of collagen to indium oxide nanoparticles and infrared emissivity study thereon

Adsorption of collagen to indium oxide nanoparticles was carried out in water-acetone solution at volumetric ratio of 1:1 with pH value varying from 3.2 to 9.3. As indicated by TGA, maximum collagen adsorption to indium oxide nanoparticles occurred at pH of 3.2. It was proposed that noncovalent interactions such as hydrogen bonding, hydrophilic and electrostatic interactions made main contributions to collagen adsorption. The IR emissivity values (8-14 {mu}m) of collagen-adsorbed indium oxide nanoparticles decreased significantly compared to either pure collagen or indium oxide nanoparticles possibly due to the interfacial interactions between collagen and indium oxide nanoparticles. And the lowest infrared emissivity value of 0.587 was obtained at collagen adsorption of 1.94 g/100 g In{sub 2}O{sub 3}. On the chance of improved compatibility with organic adhesives, the chemical activity of adsorbed collagen was further confirmed by grafting copolymerization with methyl methacrylate by formation of polymer shell outside, as evidenced by IR spectrum and transmission electron microscopy.

36 MATERIALS SCIENCE↗

Vinyl monomers-induced synthesis of polyvinyl alcohol-stabilized selenium nanoparticles

A simple wet chemical method has been developed to synthesize selenium nanoparticles (size 100-200 nm), by reaction of sodium selenosulphate precursor with different vinyl monomers, such as acrylamide, N,N'-dimethylene bis acrylamide, methyl methacrylate, sodium acrylate, etc., in aqueous medium, under ambient conditions. Polyvinyl alcohol has been used to stabilize the selenium nanoparticles. Average size of the synthesized selenium nanoparticles can be controlled by adjusting concentration of both the precursors and the stabilizer. Rate of the reaction as well as size of the resultant selenium nanoparticles have been correlated with the functional groups of the different monomers. UV-vis optical absorption spectroscopy, X-ray diffraction, energy dispersive X-rays, differential scanning calorimetry, atomic force microscopy, scanning electron microscopy and transmission electron microscopy techniques have been employed to characterize the synthesized selenium nanoparticles. Gas chromatographic analysis of the reaction mixture established the non-catalytic role of the vinyl monomers, which were found to be consumed during the course of the reaction.

36 MATERIALS SCIENCE↗

Study on the effect of surfactants on morphologies of trigonal selenium in microfluidic reactor

The influence of the surfactants on the morphologies of trigonal selenium (t-Se) submicrostructures was studied in a two-step microfluidic system, which is composed of a glass microchip for preparing spherical amorphous selenium (a-Se) colloids coupled with a poly(methyl methacrylate) microchip for transferring a-Se into its t-Se seeds under sonication. The selenious acid containing surfactants and hydrazine solutions were delivered through the two-inlets of the glass microfluidic chip. Submicro-rods, -wires as well as -tubes of t-Se were obtained by simply varying the coexisted surfactants. The as-synthesized products were characterized by powder X-ray diffraction (XRD), Raman spectrum, scanning electron microscopy (SEM), transmission electron microscopy (TEM) and selected-area electron diffraction (SAED).

36 MATERIALS SCIENCE↗

Synthesis and properties of poly(methyl methacrylate-2-acrylamido-2-methylpropane sulfonic acid)/PbS hybrid composite

The synthesis of a new hybrid composite based on PbS nanoparticles and poly(methyl methacrylate-2-acrylamido-2-methylpropane sulfonic acid) [P(MMA-AMPSA)] copolymer is reported. The chemical synthesis consists in two steps: (i) a surfactant-free emulsion copolymerization between methyl methacrylate and 2-acrylamido-2-methylpropane sulfonic acid and (ii) the generation of PbS particles in the presence of the P(MMA-AMPSA) latex, from the reaction between lead nitrate and thiourea. The composite was studied by scanning electron microscopy (SEM), X-ray diffraction, FTIR spectroscopy, thermogravimetric analysis and differential scanning calorimetry. The microstructure observed using SEM proves that the PbS nanoparticles are well dispersed in the copolymer matrix. The X-ray diffraction measurements demonstrate that the PbS nanoparticles have a cubic rock salt structure. It was also found that the inorganic semiconductor nanoparticles improve the thermal stability of the copolymer matrix.

2-METHYLPROPANE↗