Search NASA⌕ Search

SEARCH · Search NASA

Results for “MODEL RESULTS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

High-energy radiation damage in zirconia: Modeling results

Zirconia is viewed as a material of exceptional resistance to amorphization by radiation damage, and consequently proposed as a candidate to immobilize nuclear waste and serve as an inert nuclear fuel matrix. Here, we perform molecular dynamics simulations of radiation damage in zirconia in the range of 0.1–0.5 MeV energies with account of electronic energy losses. We find that the lack of amorphizability co-exists with a large number of point defects and their clusters. These, importantly, are largely isolated from each other and therefore represent a dilute damage that does not result in the loss of long-range structural coherence and amorphization. We document the nature of these defects in detail, including their sizes, distribution, and morphology, and discuss practical implications of using zirconia in intense radiation environments.

36 MATERIALS SCIENCE↗

The AWAKEN wind farm benchmark, Part 2: Modeling results

Accurately modeling wind farm performance in complex atmospheric flows remains a challenge. This paper presents the modeling results of the American WAKE experimeNt (AWAKEN) wind farm benchmark, a collaborative effort involving 16 research groups from academia and industry within the International Energy Agency Wind Technology Collaboration Programme Task 57. The study evaluates a diverse suite of simulation tools, ranging from fast-running engineering wake models to high-fidelity large-eddy simulations, against a diurnal case study observed during the AWAKEN campaign. The benchmark utilized a three-phase structure to progressively assess model performance as observational data availability increased. Initial blind predictions showed that higher-fidelity models did not uniformly outperform simpler simulation tools. A distinct spatial bias was observed where models struggled to resolve the interplay between a low-level jet, wakes, and terrain-induced flow acceleration. In subsequent phases, leveraging additional measurements for model improvement led to a reduction in mean absolute error across the model ensemble; however, this effect was most pronounced in engineering wake models, where targeted calibration reduced error by up to 40~\%. Overall, the study demonstrates that inflow characterization remains a primary prerequisite for accuracy, particularly for models relying on coarse forcing datasets. While the limited ability to resolve local terrain-flow interactions under single-day conditions represent a recognized constraint, the overall findings on wake modeling and real-world validation still provide valuable guidance for model application and for mitigating this limitation.

Bodini, Nicola↗

Modeled Results of Four Residential Energy Efficiency Measure Packages for Deriving Advanced Building Construction Research Targets

The Advanced Building Construction (ABC) Initiative from the U.S. Department of Energy Building Technologies Office is working to accelerate industrialized construction innovations for decarbonizing buildings. To inform performance and cost targets for research under the ABC Initiative, this analysis used the ResStock™ tool to evaluate the energy savings, utility bill impacts, and carbon emissions impacts of four simulated upgrade packages with specific target performance levels on a large sample of residential dwelling units (approximately 550,000) representative of the U.S. housing stock.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

COMPARING MODEL RESULTS TO NATIONAL CLIMATE POLICY GOALS: RESULTS FROM THE ASIA MODELING EXERCISE

While the world has yet to adopt a single unified policy to limit climate change, many countries and regions have adopted energy and climate policies that have implications for global emissions. In this paper, we discuss a few key policies and how they are included in a set of 24 energy and integrated assessment models that participated in the Asia Modeling Exercise. We also compare results from these models for a small set of stylized scenarios to the pledges made as part of the Copenhagen Accord and the goals stated by the Major Economies Forum. We find that the targets outlined by the United States, the European Union, Japan, and Korea require significant policy action in most of the models analyzed. For most of the models in the study, however, the goals outlined by India are met without any climate policy. The stringency of climate policy required to meet China’s Copenhagen pledges varies across models and accounting methodologies.

Calvin, Katherine V↗

Beginner's Guide to Understanding Power System Model Results for Long-Term Resource Plans

This guide was developed to improve decision-making in the electricity planning process by strengthening dialogue between electricity system planners and stakeholders throughout the process. This document was created for anyone who is first getting exposed to scenario results from power system planning models, or for those who are beginning to interact with power system modelers. It does not assume any experience with power system modeling, or familiarity with electricity planning concepts. This guide can be helpful to a wide range of people, including but not limited to state utility commissioners and commission staff, state energy offices, and intervenors in the planning process. It is targeted to those who are evaluating or reviewing model results presented by a utility, which typically span utility-scale generation and storage (and associated transmission) assets. This guide is designed to provide enough background and guidance that stakeholders can formulate and ask questions to evaluate model results through a deeper understanding of the key assumptions, data, and methods that drive decision outcomes. The ultimate purpose of this work is to increase transparency in the electricity planning process by enabling stakeholders to better engage and evaluate model results. A follow-on guide will provide a deeper dive into emerging topics, which are expected to become more prominent in the electricity planning process, but whose methods and approaches are still being refined.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Pathways Analysis Summary: Decarbonization Potential for Industrial Subsectors - Preliminary Modeling Results

This provides a summary of draft modeling efforts undertaken by the U.S. Department of Energy (DOE) Industrial Efficiency and Decarbonization Office (IEDO) as an extension and expansion of the 2022 Industrial Decarbonization Roadmap. IEDO is providing these draft modeling results to support stakeholder engagement and inform office- and department wide strategy and decision making. Section 1 provides an overview of the context for this analysis and modeling as well as information on the decarbonization pillars characterized and the models themselves. Section 2 presents modeling results of one net-zero emissions pathway each for six industrial subsectors: cement, chemicals, food and beverage, iron and steel, petroleum refining, and pulp and paper. It is important to note that these pathways are just one example and there is no single pathway for any single industrial subsector. Competition across different possible pathways will be essential to industrial decarbonization success. Section 3 provides an overview of the “rest of industry” subsectors and a high-level overview of net-zero barriers, challenges, pathways, and technologies. IEDO will continue to consider net-zero pathways and modeling for these rest of industry subsectors. Additional details will be made available in the future on the IEDO website.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Intermountain West Energy Sustainability & Transitions Initiative: CO2 Transport and Geologic Storage Modeling Results

These resources provide the full set of cost modeling results and methods as part of the I-WEST Roadmap Initiative that were used to compile figures as part of the "Pathways to CO2 Utilization and Storage for the Intermountain West Region" chapter. The data were generated from a series of National Energy Technology Laboratory (NETL) cost models and relate to carbon dioxide (CO2) transport costs, CO2 enhanced oil recovery (CO2-EOR) economics, and saline storage economics. These models were used to analyze various business cases given changes in technical and financial assumptions for the I-WEST region as a means to explore how these assumptions influence CO2 transport and storage costs, as well as to evaluate the effect of changing oil prices on the viability of CO2-EOR and the mass of CO2 stored via CO2-EOR. The accompanying report titled "Intermountain West Energy Sustainability & Transitions Initiative: CO2 Transport and Geologic Storage Modeling Results" provides a detailed overview on the models, assumptions, and parameters used in the modeling, as well as example results..

CO2 EOR costs,CO2 Storage Costs,CO2 transportation↗

Beginner's Guide to Understanding Power System Model Results for Long-Term Resource Plans

This presentation summarizes a recently published beginner's guide for understanding power system model results for long-term resource plans. This guide is designed to improve decision-making in the electricity planning process by strengthening dialogue between system planners and relevant stakeholders. It focuses on interpreting scenario results generated by power system planning models. These results are often used to inform integrated resource plans, which are long-term plans for a utility to meet future electricity requirements. Whether you are a state utility commissioner, commission staff, part of a state energy office, an intervenor in the planning process, or another stakeholder, this guide is designed to help you better weigh in on the modeling methods or interpret the model results to improve decision-making. This guide can enhance your understanding to ask the right questions, which can enable better understanding of results and key assumptions, data, and methods.

ENERGY PLANNING, POLICY, AND ECONOMY↗

Impact of carbon dioxide removal technologies on deep decarbonization: EMF37 MARKAL–NETL modeling results

Here this paper examines the MARKAL-NETL modeling results for the Energy Modeling Forum Study on Deep Decarbonization & High Electrification Scenarios for North America (EMF 37) with specific focus on carbon dioxide removal (CDR) technologies and opportunities under different scenarios guidelines, policies, and technological advancements. The results demonstrate that CDR, such as, bioenergy with carbon capture and storage (BECCS), direct air capture (DAC) and afforestation are key negative emission technologies in deep decarbonization scenarios in the U.S. are accounted for about 70% of annually avoided carbon dioxide emissions (CO 2 ) by 2050, or more than 2 billion tons of CO 2 (GtCO 2 ). The potential scale of CDR and its impact on the energy system depends on energy supply and demand technologies advancement and their costs, the level of end-use sectors electrification, availability and costs of CDR. Results show that the carbon prices are substantially lower if the advanced technologies available, particularly, in carbon management scenarios.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Advanced Guide to Understanding Power System Model Results for Long-Term Resource Plans

This guide is for public utility commission staff, state energy office staff, and other stakeholders who review model results for utility integrated resource plans (IRPs). It builds on the "Beginner's Guide to Understanding Power System Model Results for Long-Term Resource Plans," and delves into more advanced topics that were not included or not fully covered in the beginner's guide. The topics included here are evolving and may or may not be important to the resource plan you are evaluating. Due to limitations in resources, it's also not possible to give the highest level of detail or attention to every topic within a plan. An important part of planning for an uncertain future involves deciding which topics deserve the most focus and resources. It's all about prioritizing efforts where they will have the most impact or be most beneficial despite uncertainties ahead. As with the beginner's guide, we intend for this guide to help improve decision-making in the electricity planning process by strengthening understanding and dialogue between electricity system planners and relevant stakeholders. The following information is designed to allow you to better engage in the planning process by evaluating results, asking questions, and thinking through what is most important. We allocate significant discussion in the guide to electricity demand evolution, demand-side resources, and resource adequacy. These topics have garnered increasing attention, hence their prominence in this guide. Other topics are also presented, but their incorporation into the planning process might vary based on interest and relevance. The absence of certain topics doesn't diminish their importance; rather, it reflects the reality that in planning, trade-offs necessitate prioritizing certain aspects over others.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Intermountain West Energy Sustainability & Transitions Initiative: CO 2 Transport and Geologic Storage Modeling Results

This report and its associated Excel spreadsheet file provide the results of technoeconomic modeling of carbon dioxide (CO 2 ) pipeline transport modeling, CO 2 storage in deep saline subsurface formations, and CO 2 enhanced oil recovery (EOR). This report provides the methodology, describes the models and summarizes results for the three aspects of the analysis done for the Intermountain West Energy Sustainability and Transition (I-WEST) Initiative.

42 ENGINEERING↗

Geophysical and Environmental Monitoring Data, and Subsurface Flow Modelling Results for Chicken Bone Meadow, Mt. Snodgrass, Crested Butte, CO

This dataset includes geoelectrical monitoring data acquired between October 2021 and November 2022, soil moisture and temperature data, groundwater data obtained from borehole SNIB covering the period from June 2021 to September 2022, and hydrological modelling results. The data were acquired to investigate how variations in bedrock type and topography, and vegetation cover control subsurface flow dynamics. To provide insights into the subsurface flow dynamics and their controls, a monitoring transect was installed at the Chicken Bone Meadow, Mt. Snodgrass, Crested Butte, CO, measuring the spatio-temporal variations of soil moisture, soil and snow temperature, subsurface electrical resistivity variations, and groundwater dynamics. Field data are organized in a folder structure, with Electrical Resistivity Tomography (ERT) data being provided as one file per measurement, and data of the soil moisture and temperature sensors being provided as text files covering the entire monitoring period. The ‘Locations.csv’ file contains the location of all sensors, given in NAD83 – UTM Zone 13N. ERT monitoring data has been processed to filter data based on reciprocal errors (data with errors > 30% were removed), a linear error model was fitted to each survey, and to ensure a constant set of measurements for time-lapse inversion, filtered data were interpolated and assigned a 100% measurement error. Soil moisture and temperature data were acquired at 15 min intervals, and averaged to provide 1h data. Weather data and borehole data (groundwater depth, conductivity and temperature) were acquired at 30 min intervals, and are provided as daily measurements; all measurements are averaged, except of precipitation values, which are given as daily accumulation. The hydrological model was set up along the ERT monitoring transect, and net infiltration was used as surface boundary condition and derived from the weather data. Four different results are provided, (1) results for a parameterization using hydraulic permeability and porosity as derived from the ERT data through petrophysical relationships, and (2) three simplified model results, using 1 to 3 geological layers above the bedrock. Modelling was performed using PFLOTRAN, and for each model the PFLOTRAN input files are provided. The result files include weekly hydrological modelling results (e.g., saturation, velocities, pressures), as well as the model parameterization. The dataset additionally includes a file-level metadata (flmd.csv) file that lists each file contained in the dataset with associated metadata; and a data dictionary (dd.csv) file that contains column/row headers used throughout the files along with a definition, units, and data type.

54 ENVIRONMENTAL SCIENCES↗

Gearbox Reliability Collaborative Phase 1 and 2: Testing and Modeling Results; Preprint

The Gearbox Reliability Collaborative (GRC) investigates root causes of wind turbine gearbox premature failures and validates design assumptions that affect gearbox reliability using a combined testing and modeling approach. Knowledge gained from the testing and modeling of the GRC gearboxes builds an understanding of how the selected loads and events translate into internal responses ofthree-point mounted gearboxes. This paper presents some testing and modeling results of the GRC research during Phase 1 and 2. Non-torque loads from the rotor including shaft bending and thrust, traditionally assumed to be uncoupled with gearbox, affect gear and bearing loads and resulting gearbox responses. Bearing clearance increases bearing loads and causes cyclic loading, which couldcontribute to a reduced bearing life. Including flexibilities of key drivetrain subcomponents is important in order to reproduce the measured gearbox response during the tests using modeling approaches.

17 WIND ENERGY↗

Assessment of Energy Removal Impacts on Physical Systems: Hydrodynamic Model Domain Expansion and Refinement, and Online Dissemination of Model Results

In this report we describe the 1) the expansion of the PNNL hydrodynamic model domain to include the continental shelf along the coasts of Washington, Oregon, and Vancouver Island; and 2) the approach and progress in developing the online/Internet disseminations of model results and outreach efforts in support of the Puget Sound Operational Forecast System (PS-OPF). Submittal of this report completes the work on Task 2.1.2, Effects of Physical Systems, Subtask 2.1.2.1, Hydrodynamics, for fiscal year 2010 of the Environmental Effects of Marine and Hydrokinetic Energy project.

58 GEOSCIENCES↗

Comparison of Nonlinear Model Results Using Modified Recorded and Synthetic Ground Motions

A study has been performed that compares results of nonlinear model runs using two sets of earthquake ground motion time histories that have been modified to fit the same design response spectra. The time histories include applicable modified recorded earthquake ground motion time histories and synthetic ground motion time histories. The modified recorded earthquake ground motion time histories are modified from time history records that are selected based on consistent magnitude and distance. The synthetic ground motion time histories are generated using appropriate Fourier amplitude spectrums, Arias intensity, and drift correction. All of the time history modification is performed using the same algorithm to fit the design response spectra. The study provides data to demonstrate that properly managed synthetic ground motion time histories are reasonable for use in nonlinear seismic analysis.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Anthropogenic emissions of NOx over China: Reconciling the difference of inverse modeling results using GOME-2 and OMI measurements

Inverse modeling using satellite observations of nitrogen dioxide (NO2) columns has been extensively used to estimate nitrogen oxides (NOx) emissions in China. Recently, the Global Ozone Monitoring Experiment-2 (GOME-2) and Ozone Monitoring Instrument (OMI) provide independent global NO2 column measurements on a nearly daily basis at around 9:30 and 13:30 local time across the equator, respectively. Anthropogenic NOx emission estimates by applying previously developed monthly inversion (MI) or daily inversion (DI) methods to these two sets of measurements show substantial differences. We improve the DI method by conducting model simulation, satellite retrieval, and inverse modeling sequentially on a daily basis. After each inversion, we update anthropogenic NOx emissions in the model simulation with the newly obtained a posteriori results. Consequently, the inversion-optimized emissions are used to compute the a priori NO2 profiles for satellite retrievals. As such, the a priori profiles used in satellite retrievals are now coupled to inverse modeling results. The improved procedure was applied to GOME-2 and OMI NO2 measurements in 2011. The new daily retrieval-inversion (DRI) method estimates an average NOx emission of 6.9 Tg N/yr over China, and the difference between using GOME-2 and OMI measurements is 0.4 Tg N/yr, which is significantly smaller than the difference of 1.3 Tg N/yr using the previous DI method. Using the more consistent DRI inversion results, we find that anthropogenic NOx emissions tend to be higher in winter and summer than spring (and possibly fall) and the weekday-to-weekend emission ratio tends to increase with NOx emission in China.

Gu, Dasa↗