Search NASA⌕ Search

SEARCH · Search NASA

Results for “MOLECULAR FORMING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1998

High Resolution Far-Infrared Studies of Compact Regions in Star-Forming Molecular Clouds

This grant supported the acquisition, analysis and publication of high spatial resolution observations of the far-infrared emission from compact regions of star-forming molecular clouds using the Kuiper Airborne Observatory. We studied regions which are forming stars of low and intermediate mass. In analyzing the data, we utilized radiative transfer codes, incorporating disk models and envelopes, including departures from spherical symmetry. These data, along with data at other wavelengths, were used to probe the distribution of dust temperature and density around young stars and to test theoretical predictions about star formation.

Mundy, Lee G.↗
DOE OSTI2021

Organometallic complexes as preferred precursors to form molecular Ir(pyalk) coordination complexes for catalysis of oxygen evolution

Our previously reported ‘blue solution’ oxygen-evolution catalyst consists of an isomeric mixture of coordination complexes containing the (pyalk)Ir IV –O–Ir IV (pyalk) core unit and is thus entirely molecular but only when formed from organometallic precursors such as Cp*Ir(pyalk)Cl or Ir(pyalk)(CO) 2 (pyalk = (2-pyridyl)-2-propanolate). We now show that attempts to form it from such obvious coordination precursors as Na[Ir(pyalk)Cl 4 ] or Na[IrCl 2 (pyalk)(O 2 CPh) 2 ], under a variety of conditions, always fail in our hands, leading to a mixture of molecular ‘blue solution’ species and IrO x nanoparticles, rather than the purely homogeneous catalyst formed from organometallic precursors. The loss of the pyalk ligand during the oxidative activation is associated with the nanoparticle generation. External chelating ligands also failed to stop the nanoparticle formation. This work implies the paradoxical conclusion that organometallic complexes are effective as catalyst precursors, even when coordination complexes are the catalytically active species, since the inner-sphere organometallic ligands, although ultimately lost or degraded, may nevertheless have a stabilizing effect sufficient to suppress undesirable nanoparticle production pathways in the activation of the catalyst precursor. Finally, a key aspect of the present study is that organometallic complexes in general may be useful catalyst precursors even if the organometallic ligands are lost in the activation process.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2017

The Star-formation Law in Galactic High-mass Star-forming Molecular Clouds

We study the star-formation (SF) law in 12 Galactic molecular clouds with ongoing high-mass star-formation (HMSF) activity, as traced by the presence of a bright IRAS source and other HMSF tracers. We define the molecular cloud (MC) associated with each IRAS source using {sup 13}CO line emission, and count the young stellar objects (YSOs) within these clouds using GLIMPSE and MIPSGAL 24 μm Spitzer databases. The masses for high-luminosity YSOs (L {sub bol} > 10 L {sub ⊙}) are determined individually using pre-main-sequence evolutionary tracks and the evolutionary stages of the sources, whereas a mean mass of 0.5 M {sub ⊙} was adopted to determine the masses in the low-luminosity YSO population. The star-formation rate surface density (Σ{sub SFR}) corresponding to a gas surface density (Σ{sub gas}) in each MC is obtained by counting the number of the YSOs within successive contours of {sup 13}CO line emission. We find a break in the relation between Σ{sub SFR} and Σ{sub gas}, with the relation being a power law (Σ{sub SFR}∝Σ{sub gas}{sup N}) with the index N varying between 1.4 and 3.6 above the break. The Σ{sub gas} at the break is between 150–360 M {sub ⊙} pc{sup −2} for the sample clouds, which compares well with the threshold gas density found in recent studies of Galactic star-forming regions. Our clouds treated as a whole lie between the Kennicutt relation and the linear relation for Galactic and extra-galactic dense star-forming regions. We find a tendency for the high-mass YSOs to be found preferentially in dense regions at densities higher than 1200 M {sub ⊙} pc{sup −2} (∼0.25 g cm{sup −2}).

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2018

Solid-state materials formed of molecular clusters and method of forming same

A solid-state material comprising a solid-state compound is provided. The solid-state compound has the formula: [Cluster1][Cluster2]n, where Cluster1 can be a metal chalcogenide molecular cluster, Cluster2 a carbon cluster, and n the number of Cluster2 clusters in the solid-state compound. A method of forming a solid-state material is also provided.

Nuckolls, Colin↗
NASA NTRS1981

Spectroscopy of quasibound states formed by molecular collisions in the presence of a laser

A theory is reported which describes spectroscopic transitions between quasibound states formed during molecular collisions in a laser field. A preliminary calculation suggests that the shapes of absorption lines are sensitive to the shapes of the potentials; hence a method for determining the latter. The calculation also shows that respectable cross-sections for scattering can be obtained at low laser powers.

Hutchinson, M.↗
NASA NTRS1993

Monoclonal Antibody Testing for Cancer Metastasis

Malignant cells are characterized by the ability to invade surrounding normal tissues. Tumor invasion is abetted by proteolytic enzymes that have been correlated with recurrent disease and metastasis. These enzymes are involved in a cascade of proteolytic interactions with other enzymes and inhibitors which allow cancer cells to dissolve surrounding extracellular matrix, thereby enabling the cells to rapidly invade adjacent tissues and migrate to metastatic sites distant from the primary tumor. Among these proteases are the plasminogen activators (PA), collagenase IV, faminase, and in some cases cathepsin D, which together mediate key steps in the invasion process of metastasis. Cells which have the selective advantage for invasion and metastasis are those capable of regulating their proteolytic activity and proliferation. Cells in the process of invasion would be probably down-regulated for proliferation, but subsequent to attachment and adhesion at a distant site, would then be in a proliferative mode, up-regulating DNA replication. Urokinase (uPA) can be present in the tissues in several molecular forms. The inactive proenzyme is a single chain protein (scuPA) that is cleaved at Lys. 158 to form the double chain, high molecular weight active form (HMW-uPA) of 54 kD. A low molecular weight form (LMW-uPA) can also be produced by cleavage of the HMW-U PA at Lys. 135 - Lys. 136 giving a 35 kD active enzyme. Recently, it has been shown that the HMW active form of urokinase, bound to the tumor cell membrane, is responsible for the local lysis of the extracellular matrix, hence the tissue invasion mechanism for metastasis (Andreasen et al, 19861. Receptor- (membrane) bound uPA is twice as efficient (catalytically) as free fluid-phase uPA. Tho unbound uPA and the LMW form is not responsible for most of the local dissolution of extracellular matrix in the immediate vicinity of the metastatic tumor cell. High levels of urokinase (greater than 3.49 ng/mg of total protein) extracted from breast tumor tissues have recently been shown, together with plasminogen activator inhibitor 1 (PAI-1), to be a good prognostic indicator for high risk of recurrence and shorter patient survival times. In this project, we have attempted to develop immunocytochemical methodologies for the clinical assessment of the expression of urokinase plasminogen activator, which has been implicated to be important for initial steps in tumor invasion, and to relate it to cell proliferation and DNA replication at the single-cell level.

Source record↗
NASA NTRS2016

Observations of the Minor Species Al and Fe in Mercury's Exosphere

We report here on the first observational evidence of Al and Fe in the exosphere of Mercury, based on measurements of resolved emission lines of these metals with Keck-1/HIRES. Al emission was observed on two separate runs, in 2008 and 2013, with tangent column densities of 3.1 +/- 1.0 and 4.0 +/-1.5 x 10(exp 7) Al atoms cm(exp - 2) at altitudes of 1185 and 1870 km (1.5 and 1.75 R(sub M). The Al radiative intensity was seen to increase where the slit crossed the planetary penumbral shadow, and then decrease monotonically with altitude. Fe emission has been observed once, in 2009, indicating an extended source. We also present observed 3- Sigma Ca(+) upper limits near Mercury's equatorial anti-solar limb, from which an abundance limit of 4.0 x 10(exp 6) cm(exp -2) at 1650 km altitude is derived for the Ca ion. A simple model for zenith column abundances of the neutral species yields 1.9 -5.2 x 10(exp 7) Al cm(exp -2) , and 8.2 x 10(exp 8) Fe cm(exp -2) . The observations appear to be consistent with production of these species by impact vaporization, with a large fraction of the Al ejecta in molecular form, and that for Fe in mixed atomic and molecular forms. The scale height of the Al gas is consistent with a kinetic temperature of 6100-8000 K. The apparent high temperature and low density of the Al gas would suggest that it may be produced by dissociation of molecules.

Mercury↗
NASA NTRS1972

The interstellar molecular hydrogen observed in the ultraviolet spectrum of delta Scorpii

Molecular hydrogen bands of the Lyman and Werner systems were observed in the ultraviolet, interstellar spectrum of delta Sco. The average molecular column density is given, and the average temperature of the gas of which the molecules are part is 47 K. Minimum and maximum gas temperatures are 25 and 98 K respectively. The ratio of the number of hydrogen atoms in molecular form to the total number of hydrogen atoms in either atomic or molecular form is 0.044 (+0.070, -0.018).

Smith, A. M.↗
NASA NTRS2009

Molecular-specific urokinase antibodies

Antibodies have been developed against the different molecular forms of urokinase using synthetic peptides as immunogens. The peptides were synthesized specifically to represent those regions of the urokinase molecules which are exposed in the three-dimensional configuration of the molecule and are uniquely homologous to urokinase. Antibodies are directed against the lysine 158-isoleucine 159 peptide bond which is cleaved during activation from the single-chain (ScuPA) form to the bioactive double chain (54 KDa and 33 KDa) forms of urokinase and against the lysine 135 lysine 136 bond that is cleaved in the process of removing the alpha-chain from the 54 KDa form to produce the 33 KDa form of urokinase. These antibodies enable the direct measurement of the different molecular forms of urokinase from small samples of conditioned medium harvested from cell cultures.

Atassi, M. Zouhair↗
NASA NTRS1984

Changes in the cholinergic system of rat sciatic nerve and skeletal muscle following suspension induced disuse

Muscle disused induced changes in the cholinergic system of sciatic nerve, slow twitch soleus (SOL) and fast twitch extensor digitorum longus (EDL) muscle were studied in rats. Rats with hindlimbs suspended for 2 to 3 weeks showed marked elevation in the activity of choline acetyltransferase (ChAT) in sciatic nerve (38%), in SOL (108%) and in EDL (67%). Acetylcholinesterase (AChE) activity in SOL increased by 163% without changing the molecular forms pattern of 4S, 10S, 12S, and 16S. No significant changes in activity and molecular forms pattern of AChE were seen in EDL or in AChE activity of sciatic nerve. Nicotinic receptor binding of 3H-acetylcholine was increased in both muscles. When measured after 3 weeks of hindlimb suspension the normal distribution of type 1 fibers in SOL was reduced and a corresponding increase in type IIa and IIb fibers is seen. In EDL no significant change in fiber proportion is observed. Muscle activity, such as loadbearing, appears to have a greater controlling influence on the characteristics of the slow twitch SOL muscle than upon the fast twitch EDL muscle.

Gupta, R. C.↗
NASA NTRS1976

Ultraviolet observations of local gas

From satellite measurements of ultraviolet spectra of stars, an average density of approximately 1.1/cu cm for hydrogen atoms, in both atomic and molecular form, is estimated for regions of space along the galactic plane within about 1 kpc of the sun. About 20% of the atoms are bound in molecular form although this figure is uncertain since the ultraviolet measurements avoid the very dense interstellar clouds. Discrete values for this percentage are observed to vary markedly; regions with less than average density seem to have fractional abundances of H2 several orders of magnitude lower than average. A ratio of CO/H is observed for regions in front of stars observed by the Copernicus satellite.

Jenkins, E. B.↗
NASA NTRS1977

Ultraviolet observations of local gas

From satellite measurements of ultraviolet spectra of stars, an average density of approximately 1.1 cu m/sec for hydrogen atoms, in both atomic and molecular form, is estimated for regions of space along the galactic plane within about 1 kpc of the sun. About 20 percent of the atoms are bound in molecular form, although this figure is uncertain because the ultraviolet measurements avoid the very dense interstellar clouds. Discrete values for this percentage are observed to vary markedly; regions with less than average density appear to have fractional abundances of H2 several orders of magnitude lower than average. A ratio of CO/H which ranges from 10 to the minus 9th to 10 to the minus 6th power is observed for regions in front of stars observed by the Copernicus satellite.

Jenkins, E. B.↗
NASA NTRS2024

The Isotopic Composition of Molecular Water Formed by Hydrogen Reduction of Iron Oxides: A Proxy for Endogenous Water Formed From Solar Wind Implantation

Many workers have successfully utilized a variety of lunar materials to infer the sources and processing history of volatiles on the Moon. In situ techniques via NanoSIMS have enabled a plethora of hydrogen isotope measurements of isolated grains in regolith and apatite within igneous rocks, revealing an extraordinarily large range of δD values from ~ -900 to +1000‰. The lowest of these δD values are related to the incorporation of solar wind hydrogen, which is pure 1 H. Exposure to solar wind results in structural damage to crystalline phases, forming ubiquitous tens-to-hundreds of nanometer thick amorphous rims on mature regolith grains. Solar wind implantation of H + is also is also thought to result in the formation of nanophase Fe 0 (npFe), a quantitative metric of surface exposure time (e.g., Is/FeO). The formation of npFe can be generally described via the reaction: Fe 2+ O + H 2 = Fe 0 + H 2 O, resulting in the formation of endogenous molecular water reservoirs.

lunar water↗
NASA NTRS1996

The Physics of Molecular Shocks in Star-Forming Regions

Molecular shocks are produced by the impact of the supersonic infall of gas and dust onto protostars and by the interaction of the supersonic outflow from the protostar with the circumstellar material. Infalling gas creates an accretion shock around the circumstellar disk which emits a unique infrared spectrum and which processes the interstellar dust as it enters the disk. The winds and jets from protostars also impact the disk, the infalling material, and the ambient molecular cloud core creating shocks whose spectrum and morphology diagnose the mass loss processes of the protostar and the orientation and structure of the star forming system. We discuss the physics of these shocks, the model spectra derived from theoretical models, and comparisons with observations of H2O masers, H2 emission, as well as other shocks tracers. We show the strong effect of magnetic fields on molecular shock structure, and elucidate the chemical changes induced by the shock heating and compression.

Hollenbach, David↗
DOE OSTI2024

Correlating structure, self-assembly chemistry and conductivity of trithiocyanuric acid on Au(111)

The majority of candidates for simple model molecular-electronic components consist of a conductive π-conjugated hydrocarbon linker attached to at least two anchoring groups, such as thiols or isocyanides. It has been found that select molecules self-assemble on gold surfaces, creating one-dimensional conductive structures that act as “molecular wires”. Furthermore, these oligomers can form molecular bridges between gold nanoparticles, leading to the creation of simple molecular-electronic devices. This raises the question whether other π-conjugated molecular linkers could exhibit similar behavior that might offer a broader range of candidates for fabricating electronic devices. Trithiocyanuric acid (1,3,5-triazine-2,4,6-trithiol, TTCA) provides a possible candidate. TTCA (C3N3(SH)3) can exist as a trithiol or as a trithione in which hydrogens transfer to the sulfurs so that they are present with three C=N groups within the ring. TTCA exists naturally in the trithione form but converts into a trithiol when adsorbed onto an Ag(111) where it is vertically oriented. The structure of TTCA adsorbed on Au(111) is studied here using reflection-absorption infrared spectroscopy (RAIRS) where it is found to remain as the trithione isomer, but changes orientation as the coverage increases. Scanning-tunneling microscopy (STM) reveals that TTCA oligomerizes on Au(111) to form chains and triangular structures. The influence on molecular conductivity due to the differences in the adsorbate's isomeric structure was investigated using devices comprising either silver or gold nanoparticles deposited in the gap between gold nanoelectrodes. Both devices were found to conduct when dosed with TTCA, but the devices fabricated using silver were about 13 time more conductive than those made from gold nanoparticles, consistent with the π-conjugated structure formed on silver but not on gold. This implies that oligomers form both on silver and on gold and potentially increases the range of molecule-metal combinations that might be used to fabricate molecular-electronic devices.

Molecular electronics↗
NASA NTRS2007

Antibodies Against Three Forms of Urokinase

Antibodies that bind to preselected regions of the urokinase molecule have been developed. These antibodies can be used to measure small quantities of each of three molecular forms of urokinase that could be contained in microsamples or conditioned media harvested from cultures of mammalian cells. Previously available antibodies and assay techniques do not yield both clear distinctions among, and measurements of, all three forms. Urokinase is a zymogen that is synthesized in a single-chain form, called ScuPA, which is composed of 411 amino acid residues (see figure). ScuPA has very little enzyme activity, but it can be activated in two ways: (1) by cleavage of the peptide bond lysine 158/isoleucine 159 and the loss of lysine 158 to obtain the high molecular-weight (HMW) form of the enzyme or (2) by cleavage of the bond lysine 135/lysine 136 to obtain the low-molecular-weight (LMW) form of the enzyme. The antibodies in question were produced in mice and rabbits by use of peptides as immunogens. The peptides were selected to obtain antibodies that bind to regions of ScuPA that include the lysine 158/isoleucine 159 and the lysine 135/lysine 136 bonds. The antibodies include monoclonal and polyclonal ones that yield indications as to whether either of these bonds is intact. The polyclonal antibodies include ones that preferentially bind to the HMW or LMW forms of the urokinase molecule. The monoclonal antibodies include ones that discriminate between the ScuPA and the HMW form. A combination of these molecular-specific antibodies will enable simultaneous assays of the ScuPA, HMW, and LMW forms in the same specimen of culture medium.

Morrison, Dennis R.↗
NASA NTRS1982

A primer on sulfur for the planetary geologist

Sulfur has been proposed as the dominant composition for the volcanic material on Io. Sulfur is a complex element which forms many intramolecular and intermolecular allotropes exhibiting a variety of physical properties. Cyclo-S8 sulfur is the most abundant and stable molecular form. The important molecular species within liquid sulfur change in concentration with temperature. Concentrations of the allotropes control the physical properties of the melt. Discontinuities in density, viscosity, and thermal properties reflect the polymerization process within liquid sulfur. Variations in the melting point are related to autodissociation of the liquid. Many solids forms of sulfur have been identified but only orthorhombic alpha and monoclinic beta sulfur, both composed of cyclo-S8 sulfur, are stable under terrestrial conditions. Physical properties of solid sulfur are dependent on the allotrope and, in some cases, the thermal history. Three natural terrestrial sulfur flows are described: (1) Siretoko-Iosan, Japan; (2) Volcan Azufre, Galapagos Islands; and (3) Mauna Loa, Hawaii. All of the flows are associated with fumarolic areas and are considered to have formed by the melting and mobilization of sulfur deposits. Surface textures of the flows indicate a behavior of molten sulfur similar to that of silicate lava. Channels, rivulets, and lobate edges were described for the flows. The solidification of man-made sulfur flows formed as part of the Frasch mining process by which sulfur is removed from the subsurface in a liquid state is described.

Theilig, E.↗
DOE OSTI2017

Reaction of benzylidenetriphenylphosphorane with 1,4-dichloro-3а,6а-diaza-1,4-diphosphapentalene

The transylidation between 1,4-dichloro-3a,6a-diaza-1,4-diphosphapentalene and benzylidenetriphenylphosphorane (Ph{sub 3}P=CHPh) results in either mono- or disubstitution of chlorine atoms by the Ph{sub 3}P=C(Ph) group depending on the reactant molar ratio. In the crystal, the monosubstituted product has the planar diazadiphosphapentalene ring and the P—Cl ionic bond. The {sup 31}P NMR spectra of this compound exhibit a strong solvent-dependent behavior, which indicates that it exists both in the ionic form (in CH{sub 2}Cl{sub 2}, MeCN) and the molecular form (in THF). In the disubstituted product, the diazadiphosphapentalene skeleton is non-planar and is bent along the N—N bond.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗