Search NASA⌕ Search

SEARCH · Search NASA

Results for “MOLYBDENUM 86”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

Nuclear Data Sheets for A = 86

The experimental nuclear spectroscopic data for known nuclides of mass number 86 (Ga, Ge, As, Se, Br, Kr, Rb, Sr, Y, Zr, Nb, Mo, Tc) have been evaluated and presented together with Adopted properties for levels and γ rays. New high-spin data are available for {sup 86}Se, {sup 86}Br, {sup 86}Kr, {sup 86}Sr, {sup 86}Y, {sup 86}Zr and {sup 86}Mo; and lifetime data for high-spin states in {sup 86}Y and {sup 86}Zr. No significant new data since the 2001 NDS for A=86 have been reported for {sup 86}Rb and {sup 86}Nb. No data are yet available for excited states in {sup 86}Ga and {sup 86}As. The decay scheme of radioactive {sup 86}Ge is unknown, while those for {sup 86}Ga, {sup 86}As, 47.4 min isomer of {sup 86}Y, {sup 86}Nb and {sup 86}Tc are deemed as incomplete. Isomerism in {sup 86}Nb remains unconfirmed. This work supersedes the data presented in the previous NDS evaluation of A=86 published by 2001Si43.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Continuous hydrodeoxygenation of lignin to jet-range aromatic hydrocarbons

Sustainable aviation fuel (SAF) is essential to decrease the carbon footprint of the aviation industry. Although many strategies have been developed to provide the branched, aliphatic components of SAF, few viable strategies have been demonstrated to supply the aromatic and cycloalkane fraction of SAF at the necessary scale from bio-based feedstocks. Lignin is the largest natural source of renewable aromatic compounds, yet major challenges in deoxygenation have prevented its use as a feedstock for SAF. Here we report a continuous, two-stage catalytic process using molybdenum carbide to deoxygenate lignin from poplar into aromatic hydrocarbons with 87.5% selectivity towards aromatic hydrocarbons at 86% of the theoretical carbon recovery. This work demonstrates an effective approach to convert lignin into aromatic SAF blendstocks.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Elastic Properties of Rolled Uranium -- 10 wt.% Molybdenum Nuclear Fuel Foils

In situ neutron diffraction data was collected during elastic loading of rolled foils of uranium-10 wt.% molybdenum bonded to a thin layer of zirconium. Lattice parameters were ascertained from the diffraction patterns to determine the elastic strain and, subsequently, the elastic moduli and Poisson’s ratio in the rolling and transverse directions. The foil was found to be elastically isotropic in the rolling plane with an effective modulus of 86 + / - 3 GPa and a Poisson’s ratio 0.39 + / - 0.04.

99 GENERAL AND MISCELLANEOUS↗

High energy X-ray diffraction measurement of residual stresses in a monolithic aluminum clad uranium–10 wt% molybdenum fuel plate assembly

Residual stresses are expected in monolithic, aluminum clad uranium 10 wt% molybdenum (U–10Mo) nuclear fuel plates because of the large mismatch in thermal expansion between the two bonded materials. The full residual stress tensor of the U–10Mo foil in a fuel plate assembly was mapped with 0.1 mm resolution using high-energy (86 keV) X-ray diffraction. The in-plane stresses in the U–10Mo foil are strongly compressive, roughly -250 MPa in the longitudinal direction and -140 MPa in the transverse direction near the center of the fuel foil. The normal component of the stress is weakly compressive near the center of the foil and tensile near the corner. The disparity in the residual stress between the two in-plane directions far from the edges and the tensile normal stress suggest that plastic deformation in the aluminum cladding during fabrication by hot isostatic pressing also contributes to the residual stress field. A tensile in-plane residual stress is presumed to be present in the aluminum cladding to balance the large in-plane compressive stresses in the U–10Mo fuel foil, but cannot be directly measured with the current technique due to large grain size.

99 GENERAL AND MISCELLANEOUS↗

TYPE Ia SUPERNOVAE AS SITES OF THE p-PROCESS: TWO-DIMENSIONAL MODELS COUPLED TO NUCLEOSYNTHESIS

Beyond Fe, there is a class of 35 proton-rich nuclides, between {sup 74}Se and {sup 196}Hg, called p-nuclei. They are bypassed by the s and r neutron capture processes and are typically 10-1000 times less abundant than the s- and/or r-isotopes in the solar system. The bulk of p-isotopes is created in the 'gamma processes' by sequences of photodisintegrations and beta decays in explosive conditions in both core collapse supernovae (SNe II) and in Type Ia supernovae (SNe Ia). SNe II contribute to the production of p-nuclei through explosive neon and oxygen burning. However, the major problem in SN II ejecta is a general underproduction of the light p-nuclei for A < 120. We explore SNe Ia as p-process sites in the framework of a two-dimensional SN Ia delayed detonation model as well as pure deflagration models. The white dwarf precursor is assumed to have reached the Chandrasekhar mass in a binary system by mass accretion from a giant/main-sequence companion. We use enhanced s-seed distributions, with seeds directly obtained from a sequence of thermal pulse instabilities both in the asymptotic giant branch phase and in the accreted material. We apply the tracer-particle method to reconstruct the nucleosynthesis by the thermal histories of Lagrangian particles, passively advected in the hydrodynamic calculations. For each particle, we follow the explosive nucleosynthesis with a detailed nuclear reaction network for all isotopes up to {sup 209}Bi. We select tracers within the typical temperature range for p-process production, (1.5-3.7) x 10{sup 9} K, and analyze in detail their behavior, exploring the influence of different s-process distributions on the p-process nucleosynthesis. In addition, we discuss the sensitivity of p-process production to parameters of the explosion mechanism, taking into account the consequences on Fe and alpha elements. We find that SNe Ia can produce a large amount of p-nuclei, both the light p-nuclei below A = 120 and the heavy-p nuclei, at quite flat average production factors, tightly related to the s-process seed distribution. For the first time, we find a stellar source able to produce both light and heavy p-nuclei almost at the same level as {sup 56}Fe, including the debated neutron magic {sup 92,} {sup 94}Mo and {sup 96,} {sup 98}Ru. We also find that there is an important contribution from the p-process nucleosynthesis to the s-only nuclei {sup 80}Kr, {sup 86}Sr, to the neutron magic {sup 90}Zr, and to the neutron-rich {sup 96}Zr. Finally, we investigate the metallicity effect on p-process production in our models. Starting with different s-process seed distributions for two metallicities Z = 0.02 and Z = 0.001, running two-dimensional SN Ia models with different initial composition, we estimate that SNe Ia can contribute to at least 50% of the solar p-process composition. A more detailed analysis of the role of SNe Ia in Galactic chemical evolution of p-nuclei is in preparation.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

The Effect of Fluoride Doping on Lithium Diffusivity in Layered Molybdenum Oxide

The effects of cation doping on cathode performance has been extensively studied; however, the field of anion doping has historically received much less attention. Fluoride doping Can greatly increase the initial diffusivity of the layered MoO3 system. The first discharge cycle of the layered alpha-MoO3 and MoO2.8F0.2 phases were investigated and compared using the galvanostatic intermittent titration technique (GITT) in a lithium ion cell. The analysis revealed that a slight reduction of the oxide by fluoride doping to form a fluorobronze (MoO2.8F0.2) eliminated a slow electrochemical process observed in alpha-MoO3. Galvanostatic cycling studies show that while alpha-MoO3 has a higher initial capacity, it exhibits a first cycle Coulombic efficiency of only 86% with rapid capacity fade which has been associated with lithium trapping within the MoO3 layer. In contrast, the Li+ intercalation process in the fluorobronze was found to have a 94% Coulombic efficiency on the first cycle. By the third cycle Coulombic efficiencies greater than 99% were observed for five cycles. A thorough investigation of the synthesis of MoO2.8F0.2 is also presented. Under mild hydrothermal conditions, the fluorination of alpha-MoO3 to form MoO2.8F0.2 is topotactic, while a competing reaction in solution forms MoO2.4F0.6 (ReO3 structure). Methods to prevent the solution phase reaction from occurring are discussed.

batteries↗

Abrupt structural transition in exotic molybdenum isotopes unveils an isospin-symmetric island of inversion

Like electrons in atoms, protons and neutrons in nuclei occupy orbitals in a shell structure with energy gaps at magic numbers. Radioactive-beam experiments revealed the disappearance of magic numbers in some neutron-rich isotopes. In these nuclei, configurations involving particles excited across the shell gap gain correlation energy, becoming the ground state. Neutron-rich regions of the nuclear chart that exhibit this property are known as “Islands of Inversion”. Here we present the lifetime measurement of the first 2 + states in 84 Mo (N = Z) and 86 Mo (N = Z + 2) revealing an unexpected sharp structural change between them defining the edge of the region of deformation around 80 Zr. Similarly to the neutron-rich N = 40 Island of Inversion near 64 Cr where cross-shell excitations dominate, we identify this region as an Island of Inversion with symmetrical proton and neutron excitations that we term “Isospin-Symmetric Island of Inversion”. Three-nucleon forces are suggested to drive Mo isotope structural changes.

experimental nuclear physics↗

Materials Data on CeMg30BO32 by Materials Project

Mg30CeBO32 is Molybdenum Carbide MAX Phase-derived structured and crystallizes in the tetragonal P4/mmm space group. The structure is three-dimensional. there are eight inequivalent Mg sites. In the first Mg site, Mg is bonded to six O atoms to form MgO6 octahedra that share corners with two equivalent CeO6 octahedra, corners with four MgO6 octahedra, and edges with twelve MgO6 octahedra. The corner-sharing octahedral tilt angles are 0°. There are a spread of Mg–O bond distances ranging from 2.02–2.18 Å. In the second Mg site, Mg is bonded to six O atoms to form a mixture of edge and corner-sharing MgO6 octahedra. The corner-sharing octahedral tilt angles are 0°. There are a spread of Mg–O bond distances ranging from 2.01–2.18 Å. In the third Mg site, Mg is bonded to six O atoms to form a mixture of edge and corner-sharing MgO6 octahedra. The corner-sharing octahedral tilt angles are 0°. There are four shorter (2.13 Å) and two longer (2.15 Å) Mg–O bond lengths. In the fourth Mg site, Mg is bonded to six O atoms to form a mixture of edge and corner-sharing MgO6 octahedra. The corner-sharing octahedral tilt angles are 0°. There are four shorter (2.14 Å) and two longer (2.17 Å) Mg–O bond lengths. In the fifth Mg site, Mg is bonded to six O atoms to form MgO6 octahedra that share corners with six MgO6 octahedra, an edgeedge with one CeO6 octahedra, and edges with ten MgO6 octahedra. The corner-sharing octahedra tilt angles range from 2–6°. There are a spread of Mg–O bond distances ranging from 2.07–2.26 Å. In the sixth Mg site, Mg is bonded to six O atoms to form a mixture of edge and corner-sharing MgO6 octahedra. The corner-sharing octahedra tilt angles range from 1–4°. There are a spread of Mg–O bond distances ranging from 2.14–2.18 Å. In the seventh Mg site, Mg is bonded to six O atoms to form MgO6 octahedra that share corners with six MgO6 octahedra, an edgeedge with one CeO6 octahedra, and edges with eleven MgO6 octahedra. The corner-sharing octahedra tilt angles range from 2–4°. There are a spread of Mg–O bond distances ranging from 2.09–2.22 Å. In the eighth Mg site, Mg is bonded to six O atoms to form a mixture of edge and corner-sharing MgO6 octahedra. The corner-sharing octahedra tilt angles range from 2–9°. There are two shorter (2.15 Å) and four longer (2.17 Å) Mg–O bond lengths. Ce is bonded to six O atoms to form CeO6 octahedra that share corners with four equivalent MgO6 octahedra and edges with twelve MgO6 octahedra. The corner-sharing octahedral tilt angles are 0°. There are two shorter (2.22 Å) and four longer (2.30 Å) Ce–O bond lengths. B is bonded in a linear geometry to two equivalent O atoms. Both B–O bond lengths are 2.10 Å. There are ten inequivalent O sites. In the first O site, O is bonded to five Mg and one Ce atom to form OCeMg5 octahedra that share corners with four OMg6 octahedra, corners with two equivalent OMg5 square pyramids, and edges with twelve OCeMg5 octahedra. The corner-sharing octahedra tilt angles range from 0–1°. In the second O site, O is bonded to five Mg atoms to form OMg5 square pyramids that share corners with six OCeMg4B octahedra, corners with three equivalent OMg5 square pyramids, and edges with eight OMg6 octahedra. The corner-sharing octahedra tilt angles range from 5–86°. In the third O site, O is bonded to six Mg atoms to form a mixture of edge and corner-sharing OMg6 octahedra. The corner-sharing octahedra tilt angles range from 0–1°. In the fourth O site, O is bonded to six Mg atoms to form OMg6 octahedra that share corners with four OMg6 octahedra, corners with two equivalent OMg5 square pyramids, edges with ten OMg6 octahedra, and edges with two equivalent OMg5 square pyramids. The corner-sharing octahedra tilt angles range from 0–1°. In the fifth O site, O is bonded to five Mg and one Ce atom to form OCeMg5 octahedra that share corners with four OCeMg5 octahedra, corners with two equivalent OMg5 square pyramids, and edges with twelve OCeMg5 octahedra. The corner-sharing octahedra tilt angles range from 0–1°. There are a spread of O–Mg bond distances ranging from 2.02–2.26 Å. In the sixth O site, O is bonded to six Mg atoms to form OMg6 octahedra that share corners with four OMg6 octahedra, corners with two equivalent OMg5 square pyramids, edges with ten OMg6 octahedra, and edges with two equivalent OMg5 square pyramids. The corner-sharing octahedra tilt angles range from 0–1°. There are two shorter (2.14 Å) and two longer (2.17 Å) O–Mg bond lengths. In the seventh O site, O is bonded to six Mg atoms to form OMg6 octahedra that share corners with six equivalent OMg6 octahedra, edges with ten OCeMg5 octahedra, and edges with two equivalent OMg5 square pyramids. The corner-sharing octahedra tilt angles range from 0–6°. In the eighth O site, O is bonded to four equivalent Mg, one Ce, and one B atom to form OCeMg4B octahedra that share corners with six OCeMg4B octahedra, corners with four equivalent OMg5 square pyramids, and edges with eight OMg6 octahedra. The corner-sharing octahedra tilt angles range from 0–4°. In the ninth O site, O is bonded to six Mg atoms to form OMg6 octahedra that share corners with six OCeMg4B octahedra, edges with ten OCeMg5 octahedra, and edges with two equivalent OMg5 square pyramids. The corner-sharing octahedra tilt angles range from 0–4°. In the tenth O site, O is bonded to six Mg atoms to form a mixture of edge and corner-sharing OMg6 octahedra. The corner-sharing octahedra tilt angles range from 0–1°.

36 MATERIALS SCIENCE↗