Search NASA⌕ Search

SEARCH · Search NASA

Results for “Manchester Coding”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS2014

Manchester Coding Option for SpaceWire: Providing Choices for System Level Design

This paper proposes an optional coding scheme for SpaceWire in lieu of the current Data Strobe scheme for three reasons. First reason is to provide a straightforward method for electrical isolation of the interface; secondly to provide ability to reduce the mass and bend radius of the SpaceWire cable; and thirdly to provide a means for a common physical layer over which multiple spacecraft onboard data link protocols could operate for a wide range of data rates. The intent is to accomplish these goals without significant change to existing SpaceWire design investments. The ability to optionally use Manchester coding in place of the current Data Strobe coding provides the ability to DC balanced the signal transitions unlike the SpaceWire Data Strobe coding; and therefore the ability to isolate the electrical interface without concern. Additionally, because the Manchester code has the clock and data encoded on the same signal, the number of wires of the existing SpaceWire cable could be optionally reduced by 50. This reduction could be an important consideration for many users of SpaceWire as indicated by the already existing effort underway by the SpaceWire working group to reduce the cable mass and bend radius by elimination of shields. However, reducing the signal count by half would provide even greater gains. It is proposed to restrict the data rate for the optional Manchester coding to a fixed data rate of 10 Megabits per second (Mbps) in order to make the necessary changes simple and still able to run in current radiation tolerant Field Programmable Gate Arrays (FPGAs). Even with this constraint, 10 Mbps will meet many applications where SpaceWire is used. These include command and control applications and many instruments applications with have moderate data rate. For most NASA flight implementations, SpaceWire designs are in rad-tolerant FPGAs, and the desire to preserve the heritage design investment is important for cost and risk considerations. The Manchester coding option can be accommodated in existing designs with only changes to the FPGA.

Electrical Isolation↗
NASA NTRS1977

Tracking performance of symbol synchronizers for Manchester coded data

The implementation and tracking performance of symbol synchronizers for Manchester coded data is presented with motivation provided by maximum a posteriori (MAP) estimation theory. Certain physically relizable closed-loop structures, readily implemented in practice, are suggested by the theory for uncoded data symbols with arbitrary data transition probabilities. The tracking performance of these loops is optimized and comparisons are made among the various configurations over a wide range of system parameters. Although not the major intent of the paper, the acquisition problem is briefly addressed.

Simon, M. K.↗
NASA NTRS1977

On the false lock behavior of polarity-type Costas loops with Manchester coded input

A modification of a Costas loop is described, and the false lock behavior of this system is studied. The modified Costas loop hard limits the output of the in-phase channel, replaces the analog multiplier with a chopper-type device, and is equipped with single-pole arm filters in the loop. The false lock behavior associated with the use of Manchester coded data is investigated; the results can be applied to the assessment of the false lock margin on the Ku-band uplink to the Space Shuttle Orbiter through the TURSS.

Simon, M. K.↗
NASA NTRS1977

Limiter-discriminator detection performance of Manchester and NRZ coded FSK

The theory of limiter-discriminator detection of a frequency shift keyed (FSK) carrier is reviewed and this theory is used to predict the bit error probability performance of Manchester coded and nonreturn-to-zero (NRZ) coded data. A major result of the study is that the predetection time bandwidth product BT and the deviation ratio h needed to give optimum performance for Manchester coding are seen to be larger than optimum NRZ FSK. Specifically, BT of about 2 and h of about 1 will result in Manchester performance about 2 dB worse than optimum NRZ.

Cartier, D. E.↗
NASA NTRS1974

Digital transmitter for data bus communications system

Digital transmitter designed for Manchester coded signals (and all signals with ac waveforms) generated at a rate of one megabit per second includes efficient output isolation circuit. Transmitter consists of logic control section, amplifier, and output isolation section. Output isolation circuit provides dynamic impedance at terminals as function of amplifier output level.

Proch, G. E.↗
NASA NTRS1973

Data bus system development program

Two data bus systems were designed fabricated, Data Bus System I and Data Bus System II. The technical features of the delivered hardware include the following: (1) 5 MHz selfclocking data bus; (2) bidirectional communications utilizing Manchester Code at data rates in excess of 20,000 words per second; (3) utilization of MSI COS/MOS technology (4) probability of accepting an erroneous data bit less than 1 in 10 to the 25th power (5) low power consumption (50 to 1 reduction in quiescent current over P/MOS) (6) compatibility with projected high density packaging. Three distinct types of data bus remote terminals were developed: the subsystem interface unit, the combination of an electronic interface unit and a standard interface unit-serial, and an SIU/Preprocessor.

Harrison, J. S. J.↗
NASA NTRS1992

An investigation of error correcting techniques for OMV data

Papers on the following topics are presented: considerations of testing the Orbital Maneuvering Vehicle (OMV) system with CLASS; OMV CLASS test results (first go around); equivalent system gain available from R-S encoding versus a desire to lower the power amplifier from 25 watts to 20 watts for OMV; command word acceptance/rejection rates for OMV; a memo concerning energy-to-noise ratio for the Viterbi-BSC Channel and the impact of Manchester coding loss; and an investigation of error correcting techniques for OMV and Advanced X-ray Astrophysics Facility (AXAF).

Ingels, Frank↗
NASA NTRS1992

Fluid flow and heat convection studies for actively cooled airframes

The work done during the progress report period from May-October 1992 is summarized. The effect of wall thermal boundary conditions on flows over a step or rib when repeated rib roughness is used for heating augmentation is examined. In numerical investigations of various such laminar and turbulent flows, the local heat transfer coefficients on a forward-facing step or on a rib were found to be very sensitive to the wall thermal boundary condition. For the computation of constant property laminar flow, the wall thermal boundary conditions were either a uniform heat flux or a uniform temperature. Results (Nusselt number and isotherms) of the studies are included. The second part of the work consisted of using PHOENICS to solve the conjugate heat transfer problem of flow over a rib in channel. Finally, the algebraic stress model in the TEAM (Turbulent Elliptic Algorithm-Manchester) code was tested for jet impingement flow, but there needs to be an addition of the energy equation to the code.

Mills, A. F.↗
NASA NTRS2005

Data Format Classification for Autonomous Software Defined Radios

We present maximum-likelihood (ML) coherent and noncoherent classifiers for discriminating between NRZ and Manchester coded (biphase-L) data formats for binary phase-shift-keying (BPSK) modulation. Such classification of the data format is an essential element of so-called autonomous software defined radio (SDR) receivers (similar to so-called cognitive SDR receivers in the military application) where it is desired that the receiver perform each of its functions by extracting the appropriate knowledge from the received signal and, if possible, with as little information of the other signal parameters as possible. Small and large SNR approximations to the ML classifiers are also proposed that lead to simpler implementation with comparable performance in their respective SNR regions. Numerical performance results obtained by a combination of computer simulation and, wherever possible, theoretical analyses, are presented and comparisons are made among the various configurations based on the probability of misclassification as a performance criterion. Extensions to other modulations such as QPSK are readily accomplished using the same methods described in the paper.

classification↗
NASA NTRS1991

A comparison of Manchester symbol tracking loops for block 5 applications

The linearized tracking errors of three Manchester (biphase coded) symbol tracking loops are compared to determine which is appropriate for Block 5 receiver applications. The first is a nonreturn to zero (NRZ) symbol synchronizer loop operating at twice the symbol rate (NRZ x 2) so that it operates on half symbols. The second near optimally processes the mid-symbol transitions and ignores the between symbol transitions. In the third configuration, the first two approaches are combined as a hybrid to produce the best performance. Although this hybrid loop is the best at low symbol signal to noise ratios (SNRs), it has about the same performance as the NRZ x 2 loop at higher SNRs (greater than 0-dB E sub s/N sub 0). Based on this analysis, it is tentatively recommended that the hybrid loop be implemented for Manchester data in the Block 5 receiver. However, the high data rate case and the hardware implications of each implementation must be understood and analyzed before the hybrid loop is recommended unconditionally.

Holmes, J. K.↗
NASA NTRS1979

Binary-to-Manchester encoders

Two circuit system converts 16-bit-word binary encoded data to 24-bit Manchester II code to allow easy interface of flight simulators with aircraft communications equipment.

St. Cyr, R. H., III↗
NASA NTRS1980

Bidirectional Manchester repeater

Bidirectional Manchester repeater is inserted at periodic intervals along single bidirectional twisted pair transmission line to detect, amplify, and transmit bidirectional Manchester 11 code signals. Requiring only 18 TTL 7400 series IC's, some line receivers and drivers, and handful of passive components, circuit is simple and relatively inexpensive to build.

Ferguson, J.↗
NASA NTRS1986

Pilot-Tone System for Mobile Communications

In mobile communication system called tone-calibrated technique, pilot tone provides phase- and amplitude-calibration reference to enable coherent demodulation of signal at receiver despite fading. Signal received by or from mobile terminal faded due to motion of terminal and propagation of signal along multiple paths. Fading introduces random amplitude modulation and phase modulation with bandwidth of twice Doppler frequency shift. Degrading effects of multipath fading reduced. Tonecalibrated technique for use with phase-modulated data or telephony systems using Manchester digital pulse-code modulation.

Davarian, F.↗
NASA NTRS1981

Cumulative hardware distortion effects on coded and uncoded performance via a satellite repeater

An analytical investigation is presented of the cumulative impact of numerous hardware-induced distortions on BPSK bit-error-rate performance. Attention is given to 16 user and eight transponder constraints, as well as to the effect of filter bandlimiting. Uncoded and coded performance is evaluated with respect to both NRZ and Manchester signaling formats, and tight upper bounds to coded and uncoded SNR degradation are determined. Computed results based on TDRSS (Tracking and Data Relay Satellite System) specifications are presented as an example.

Benjamin, T.↗
NASA NTRS1991

Phase-lock-loop application for fiber optic receiver

Phase-locked loop circuits are frequently employed in communication systems. In recent years, digital phase-locked loop circuits were utilized in optical communications systems. In an optical transceiver system, the digital phase-locked loop circuit is connected to the output of the receiver to extract a clock signal from the received coded data (NRZ, Bi-Phase, or Manchester). The clock signal is then used to reconstruct or recover the original data from the coded data. A theoretical approach to the design of a digital phase-locked loop circuit operation at 1 and 50 MHz is described. Hardware implementation of a breadboard design to function at 1 MHz and a printed-circuit board designed to function at 50 MHz were assembled using emitter coupled logic (ECL) to verify experimentally the theoretical design.

Ruggles, Stephen L.↗
NASA NTRS1974

An all-digital Manchester symbol synchronizer for Space Shuttle

The Shuttle S-Band relay communications links via TDRS are coded and may operate at symbol signal-to-noise ratios (Es/No) as low as -5dB. A brass-board all-digital bit synchronizer with very low (0.05dB) degradation relative to an idealized analog model has been designed to process the 216 KBPS Manchester data symbols. This all-digital bit synchronizer, which provides soft decision detected outputs to a convolutional decoder, may be operated at any rate below 216 KBPS by merely changing the master clock frequency.

Batson, B. H.↗
NASA NTRS1982

Galileo probe relay receiver

For the Jovian mission, the data link from the Galileo probe to the orbiter uses suppressed-carrier Manchester encoded BPSK modulation and is protected with R = 1/2, K = 7 convolutional coding. The receiver closes the link by acquiring, tracking, and demodulating the data. It has to operate in a highly stressed environment with severe frequency offset, frequency rate, wind gust, and antenna spin conditions. Salient features are described and breadboard test data presented.

Prouty, D. A.↗