SEARCH · Search NASA
Results for “Martian atmospheric”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Listening for the Landing: Seismic Detections of Perseverance's Arrival at Mars With InSight
The entry, descent, and landing (EDL) sequence of NASA's Mars 2020 Perseverance Rover will act as a seismic source of known temporal and spatial localization. We evaluate whether the signals produced by this event will be detectable by the InSight lander (3,452 km away), comparing expected signal amplitudes to noise levels at the instrument. Modeling is undertaken to predict the propagation of the acoustic signal (purely in the atmosphere), the seismoacoustic signal (atmosphere-to-ground coupled), and the elastodynamic seismic signal (in the ground only). Our results suggest that the acoustic and seismoacoustic signals, produced by the atmospheric shock wave from the EDL, are unlikely to be detectable due to the pattern of winds in the martian atmosphere and the weak air-to-ground coupling, respectively. However, the elastodynamic seismic signal produced by the impact of the spacecraft's cruise balance masses on the surface may be detected by InSight. The upper and lower bounds on predicted ground velocity at InSight are 2.0 × 10 -14 and 1.3 × 10 -10 m s -1 . The upper value is above the noise floor at the time of landing 40% of the time on average. The large range of possible values reflects uncertainties in the current understanding of impact-generated seismic waves and their subsequent propagation and attenuation through Mars. Uncertainty in the detectability also stems from the indeterminate instrument noise level at the time of this future event. A positive detection would be of enormous value in constraining the seismic properties of Mars, and in improving our understanding of impact-generated seismic waves.
Regularization via f -Divergence: An Application to Multi-Oxide Spectroscopic Analysis
In this paper, we explore the application of convolutional neural networks (CNNs) for predicting the chemical composition of complex geologic samples in a simulated Martian atmospheric environment. Specifically, we aim to characterize oxide weight percentages (wt.%) of rock samples analyzed by remote Laser-Induced Breakdown Spectroscopy (LIBS), framing the problem as a multi-target regression task . Neural networks trained on LIBS spectra are prone to overfitting due to high spectral complexity, limited labeled data, and measurement noise. While regularization is critical for improving generalization, common methods (e.g., ℓ 2 regularization) impose constraints not directly tied to data distribution properties. We propose a novel regularization method based on a specific ƒ-divergence induced by a graph-based estimator, designed to constrain the distributional discrepancy between predictions and targets. This regularizer serves a dual purpose: (a) mitigating overfitting by enforcing a constraint on the distributional difference between predictions and noisy targets, and (b) acting as an auxiliary loss that penalizes large divergences. To enable backpropagation, we develop a differentiable approximation of this particular ƒ-divergence, making the method feasible for neural networks. Experiments on ChemCam and SuperCam LIBS calibration spectra show that mathematical equation-divergence regularization outperforms or matches standard regularization methods (ℓ 1 , ℓ 2 , dropout) and the classical baseline, partial least squares (PLS). Combining ƒ-divergence regularization with standard regularization yields further performance gains, indicating that distributional regularization is useful in this context giving a promising direction for robust model training in planetary science applications. Source code is publicly available at Klein and Li (2025), https://doi.org/10.11578/dc.20250530.7.
ATOMIC Simulations and Experimental Data for Basalt-like Compounds
This data consists of simulations and experimental measurements of laser-induced breakdown spectroscopy (LIBS). The simulations are produced by ATOMIC, a general purpose plasma modeling and kinetics code that has been designed to compute emission (or absorption) spectra from plasmas [2]. The makeup of the plasma was considered to be divided into some proportion water, some proportion Martian atmosphere (CO2), and some proportion target (from the rock or object impacted by the laser), where these proportions add to 1. Based on expert knowledge, the proportion of water was kept in the range [0.0,0.5] and the proportion of atmosphere was kept in the range [0.02, 0.9]. Our overall suite of simulations contains six sets of simulations that differ in which elements were considered to make up the target. Within each set, we used uniformly drawn temperatures and log mass densities within pre-specified ranges. The temperature range was [0.5,1.5] eV and the log (base 10) mass density range was [-7,-4]. The proportion of water, atmosphere, and target were drawn from a symmetric Dirichlet distribution, but draws in which the propor- tion of water or atmosphere exceeded the pre-specified limits were rejected from the design. Up to eleven constituent elements (Si, Al, Fe, Mg, Ca, O, Ti, Mn, Na, K, P) were considered for the target, as they are the most common elements found in basalt compounds and were used in [1]. For each run, the proportions of the constituent elements making up the target were drawn from a symmetric Dirichlet distribution. We ran 1,350 simulations that included nonzero proportions of all eleven elements. We also ran simulations which excluded some of these elements. In particular, we ran 1,000 simulations that only included nonzero proportions for the six most common elements (Si, Al, Fe, Mg, Ca, O). We also ran five sets, each with 500 simulations, that only included nonzero proportions for five of the six most common elements (but where all sets included O). Thus, we generated a total of 4,850 spectra representing basalt-like compounds in which the target was comprised of oxygen and between four and ten other elements. The ATOMIC code produced spectra over a range of 240nm - 880nm that roughly mimics the range collected by the ChemCam instrument on the Mars rover Curiosity. Each spectra had 32,000 wavelengths split across three spectrometer ranges (to mimic ChemCam). The experimental data, described in [1], measures a prepared basalt sample. All files are kept in directories whose names indicate the set of elements considered for the target with file names numbered to indicate the line in the design files used to produce the simulation. The designs are provided as text files with names indicating their purpose. The experimental data is provided as a CSV file which contains a header with measurement information, followed by a collection of 50 shots across a collection of wavelengths, along with the computed median and mean across shots.
Modeling and Investigations on Surface Colors of Wings on the Performance of Albatross-Inspired Mars Drones and Thermoelectric Generation Capabilities
Thermal effects of wing color for Albatross-inspired drones performing in the Martian atmosphere are investigated during the summer and winter seasons. This study focuses on two useful consequences of the thermal effects of wing color: the drag reduction and the thermoelectric generation of power. According to its color, each wing side has a certain temperature affecting the drag. Investigations of various configurations have shown that the thermal effect on the wing boundary layer skin drag is insignificant because of the low atmospheric pressure. However, the total drag varies as much as 12.8% between the highest performing wing color configuration and the lowest performing configuration. Additionally, the large temperature differences between the top and the bottom wing surfaces show great potential for thermoelectric power generation. The maximum temperature differences between the top and bottom surfaces for the summer and winter seasons are, respectively, 65 K and 30 K. The drag reduction and the power generation via thermoelectric generators both contribute to enhancing the endurance of drones. Future drone designs will benefit from increased endurance through optimizing the wing color configuration.
A window into atmospheric escape on early Mars provided by argon isotopes in a Martian meteorite
Novel analytical approaches to determining the trapped 38 Ar/ 36 Ar ratio of gases contained within Martian meteorites are presented and applied to the Martian regolith breccia Northwest Africa (NWA) 7034 and paired stone NWA 11220. The resulting data indicate that extensive mass-dependent fractionation of atmospheric Ar may have occurred within 150 million years of planetary formation, ostensibly as a result of diffusion-limited hydrodynamic escape. The inferred fractional loss of Ar and lighter atmospheric constituents exceeds 50%. In conclusion, these data suggest that volatiles derived from planetary outgassing and/or impactors may dominate the present abundance of atmospheric Ar.
The sound of a Martian dust devil
Dust devils (convective vortices loaded with dust) are common at the surface of Mars, particularly at Jezero crater, the landing site of the Perseverance rover. They are indicators of atmospheric turbulence and are an important lifting mechanism for the Martian dust cycle. Improving our understanding of dust lifting and atmospheric transport is key for accurate simulation of the dust cycle and for the prediction of dust storms, in addition to being important for future space exploration as grain impacts are implicated in the degradation of hardware on the surface of Mars. Here we describe the sound of a Martian dust devil as recorded by the SuperCam instrument on the Perseverance rover. The dust devil encounter was also simultaneously imaged by the Perseverance rover’s Navigation Camera and observed by several sensors in the Mars Environmental Dynamics Analyzer instrument. Combining these unique multi-sensorial data with modelling, we show that the dust devil was around 25 m large, at least 118 m tall, and passed directly over the rover travelling at approximately 5 m s –1 . Acoustic signals of grain impacts recorded during the vortex encounter provide quantitative information about the number density of particles in the vortex. The sound of a Martian dust devil was inaccessible until SuperCam microphone recordings. This chance dust devil encounter demonstrates the potential of acoustic data for resolving the rapid wind structure of the Martian atmosphere and for directly quantifying wind-blown grain fluxes on Mars.
Ultraviolet Photooxidation of Smectite-Bound Fe(II) and Implications for the Origin of Martian Nontronites
Clay minerals detected with orbital and in situ instruments in ancient Martian terrains constrain Mars' climate and aqueous alteration history. Early in its history, Mars experienced an atmospheric redox change and iron-bearing clay minerals may preserve the effects of that transition. Ferrous smectites, the thermodynamically predicted product of chemical weathering of basalts under anoxic conditions, may have undergone oxidation by exposure to chemical oxidants in the atmosphere or regolith, or by direct photooxidation at the surface. To assess these potential oxidation pathways, ferrous trioctahedral smectites of varying initial iron content were synthesized and subjected to oxidation by ultraviolet (UV) irradiation. Experimental UV irradiation under an anoxic atmosphere equivalent to approximately 7 years of flux on the Martian surface caused partial oxidation of smectite-bound Fe (Fe 3+ /ΣFe = 16–18%) and octahedral sheet contraction. Metal-OH vibrational bands in visible/near infrared (VNIR) reflectance spectra of oxidized smectites changed in band depth and asymmetry with higher iron content. X-ray diffraction patterns of UV irradiated samples indicate the formation of a mixed di- and trioctahedral smectite or a secondary nontronite phase, possibly on the surfaces of higher iron content smectites. Furthermore, these experiments suggest that UV irradiation is able to oxidize structurally bound iron in smectites without the presence of other chemical oxidants. Photooxidation may have influenced the mineralogy, both syndepositionally and postdepositionally, of Martian alteration assemblages formed near the surface and this process needs not be limited to one part of their formation history.
Mars Upper Atmospheric Temperature and Atomic Oxygen Density Derived from the O i 130.4 nm Emission Observed by NASA’s MAVEN Mission
The abundance of atomic oxygen is a major unknown for the Mars upper atmosphere, and systematic measurements of this key species is a primary objective of NASA’s Mars Atmosphere and Volatile Evolution (MAVEN) mission. Moreover, the Martian dayside temperature structure and its variability has been a subject of considerable debate in the past. In this study, an inversion analysis of the periapsis limb scans of the O i 130.4 nm emission observed by MAVEN is performed to quantify the neutral temperature and atomic oxygen abundance in the Mars upper atmosphere. Our analysis yields unprecedented resolution of the spatial variation of Mars atomic oxygen, showing that its exobase density decreases with the solar zenith angle (SZA) from ∼0° to 60° by about an order of magnitude, from ∼10{sup 8} to ∼10{sup 7} cm{sup −3} near perihelion (2015 April) and from ∼10{sup 7} to ∼10{sup 6} cm{sup −3} near aphelion (2017 November). For a given SZA the exobase densities near perihelion are about an order of magnitude higher than those near aphelion. The [O]/[CO{sub 2}] mixing ratio at 130 km altitude can vary from ∼0.1% to 4.6%, which also decreases with increasing SZA. Moreover, it is shown that the Mars exobase temperature does not vary significantly with SZA from ∼0° to ∼60°, which is estimated to be ∼239.2 ± 27.6 K near perihelion and ∼162.4 ± 19.9 K near aphelion, with a difference of 76.8 K between these two seasonal extremes.
Characterization of high-frequency waves in the Martian magnetosphere
Context.Various high-frequency waves in the vicinity of upper-hybrid and Langmuir frequencies are commonly observed in different space plasma environments. Such waves and fluctuations have been reported in the magnetosphere of the Earth, a planet with an intrinsic strong magnetic field. Mars has no intrinsic magnetic field and, instead, it possesses a weak induced magnetosphere, which is highly dynamic due to direct exposure to the solar wind. In the present paper, we investigate the presence of high-frequency plasma waves in the Martian plasma environment by making use of the high-resolution electric field data from the Mars Atmosphere and Volatile Evolution missioN (MAVEN) spacecraft. Aims.This study aims to provide conclusive observational evidence of the occurrence of high-frequency plasma waves around the electron plasma frequency in the Martian magnetosphere. We observe two distinct wave modes with frequency below and above the electron plasma frequency. The characteristics of these high-frequency waves are quantified and presented here. We discuss the generation of possible wave modes by taking into account the ambient plasma parameters in the region of observation. Methods.We have made use of the medium frequency (100 Hz–32 kHz) burst mode-calibrated electric field data from the Langmuir Probe and Waves instrument on board NASA’s MAVEN mission. Due to the weak magnetic field strength, the electron gyro-frequency is much lower than the electron plasma frequency, which implies that the upper-hybrid and Langmuir waves have comparable frequencies. A total of 19 wave events with wave activities around electron plasma frequency were identified by examining high-resolution spectrograms of the electric field. Results.These waves were observed around 5 LT when MAVEN crossed the magnetopause boundary and entered the magnetosheath region. These waves are either a broadband- or narrowband-type with distinguishable features in the frequency domain. The narrowband-type waves have spectral peak above the electron plasma frequency. However, in the case of broadband-type waves, the spectral peak always occurred below the electron plasma frequency. The broadband waves consistently show a periodic modulation of 8–14 ms. Conclusions.The high-frequency narrowband-type waves observed above the electron plasma frequency are believed to be associated with upper-hybrid or Langmuir waves. However, the physical mechanism responsible for the generation of broadband-type waves and the associated 8–14 ms modulation remain unexplained and further investigation is required.
Lyα Observations of Comet C/2013 A1 (Siding Spring) Using MAVEN IUVS Echelle
The close approach of comet C/2013 A1 (Siding Spring) to Mars in 2014 October provided a unique opportunity to observe a dynamically new Oort cloud comet with potential for interaction with a planet’s atmosphere. The water-originating hydrogen coma of the comet extended to over 20 million km from the nucleus. Determining the properties of this coma contributes to characterizing the comet’s water content and production rate. The present study analyzes a unique data set of high spectral resolution UV observations of comet C/2013 A1 Siding Spring measured by the Mars Atmosphere and Volatile Evolution spacecraft. The Siding Spring observations capture Lyα emissions from the Martian corona, the interplanetary medium, as well as the cometary H and D reservoirs. The isolated cometary spectra are analyzed to reveal a velocity distribution of H atoms that are consistent with model estimates of H{sub 2}O photodissociated H emissions and of OH photodissociated H emissions, Doppler shifted from the main comet H emission line center by 18 km s{sup −1} and 8 km s{sup −1}, respectively. The variations in comet H brightness with distance from the nucleus are used to constrain cometary water production to a rate of 0.5 × 10{sup 28} molecules s{sup −1} at a time when Siding Spring was at 1.5 au, pre-perihelion.
Effects of Global and Regional Dust Storms on the Martian Hot O Corona and Photochemical Loss
Here, we examine for the first time the effects of both global and regional dust storms on the formation of the Martian hot O corona and associated photochemical loss of O. Our study is conducted by utilizing our integrated model framework, which couples our Martian hot O corona model with a multifluid magnetohydrodynamic model for Mars for the dusty and clear atmospheric condition cases. We present our results with the most up-to-date cross sections for the O( 3 P )-CO 2 collisions. The main effect of dust storms on the ionosphere is the upward shift of the ionosphere on the dayside, which results in an increase in production of hot O at all altitudes above the ionospheric peak. However, the dust-induced inflation of the neutral upper atmosphere results in an enhancement in collisional loss of hot O and thus effectively suppresses the hot O density, reducing the global photochemical loss rate by ~28% for the global dust storm scenario. The relative density structure of the hot O corona does not show any significant changes, while its magnitude decreases at all altitudes.
First Observation of Harmonics of Magnetosonic Waves in Martian Magnetosheath Region
Abstract The present study provides an evidence for the generation of harmonics of magnetosonic waves in the Martian magnetosheath region. The wave signatures are manifested in the magnetic field measurements recorded by the fluxgate magnetometer instrument onboard the Mars Atmosphere and Volatile Evolution missioN (MAVEN) spacecraft in the dawn sector around 5–10 LT at an altitude of 4,000–6,000 kms. The wave that is observed continuously from 19.1 to 20.7 UT below the proton cyclotron frequency (f ci ≈ 46 mHz) is identified as fundamental mode of the magnetosonic wave. Whereas harmonics of the magnetosonic wave are observed during 19.7–20.3 UT at frequencies that are multiple off ci . The ambient solar wind proton density and plasma flow velocity are found to vary with a fundamental mode frequency of 46 mHz. It is noticed that the fundamental mode is mainly associated with the left‐hand (LH), and higher frequency harmonics are associated with the right‐hand (RH) circular polarizations. A clear difference in the polarization and ellipticity is noticed during the time of occurrence of harmonics. The magnetosonic wave harmonics are found to propagate in the quasi‐perpendicular directions to the ambient magnetic field. The results of linear theory and Particle‐In‐Cell simulation performed here are in agreement with the observations. The present study provides a conclusive evidence for the occurrence of harmonics of magnetosonic wave in the close vicinity of the magnetosheath region of the unmagnetized planet Mars.
Measurements of sound propagation in Mars' lower atmosphere
Acoustics has become extraterrestrial and Mars provides a new natural laboratory for testing sound propagation models compared to those ones on Earth. Owing to the unique combination of a microphone and two sound sources, the Ingenuity helicopter and the SuperCam laser-induced sparks, the Mars 2020 Perseverance rover payload enables the in situ characterization of unique sound propagation properties of the low-pressure CO 2 -dominated Mars atmosphere. In this study, we show that atmospheric turbulence is responsible for a large variability in the sound amplitudes from laser-induced sparks. This variability follows the diurnal pattern of turbulence. In addition, acoustic measurements acquired over one Martian year reveal a variation of the sound intensity by a factor of 1.8 from a constant source due to the seasonal cycle of pressure and temperature that significantly modifies the acoustic impedance and shock-wave formation. Finally, we show that the evolution of the Ingenuity tones and laser spark amplitudes with distance is consistent with one of the existing sound absorption models, which is a key parameter for numerical simulations applied to geophysical experiments on CO 2 -rich atmospheres. Overall, these results demonstrate the potential of sound propagation to interrogate the Mars environment and will therefore help in the design of future acoustic-based experiments for Mars or other planetary atmospheres such as Venus and Titan.
An acoustic investigation of the near-surface turbulence on Mars
The Perseverance rover is carrying out an original acoustic experiment on Mars: the SuperCam microphone records the spherical acoustic waves generated by laser sparks at distances from 2 m to more than 8 m. These N-shaped acoustic waves scatter from the multiple local heterogeneities of the turbulent atmosphere. Therefore, large and random fluctuations of sound travel time and intensity develop as the waves cross the medium. The variances of the travel times and the scintillation index (normalized variance of the sound intensity) are studied within the mathematical formalism of the propagation of spherical acoustic waves through thermal turbulence to infer statistical properties of the Mars atmospheric temperature fluctuation field. The comparison with the theory is made by simplifying assumptions that do not include wind fluctuations and diffraction effects. Two Earth years (about one Martian year) of observations acquired during the maximum convective period (10:00–14:00 Mars local time) show a good agreement between the dataset and the formalism: the travel time variance diverges from the linear Chernov solution exactly where the density of occurrence of the first caustic reaches its maximum. Moreover, on average, waves travel faster than the mean speed of sound due to a fast path effect, which is also observed on Earth. To account for the distribution of turbulent eddies, several power spectra are tested and the best match to observation is obtained with a generalized von Karman spectrum with a shallower slope than the Kolmogorov cascade, φ(k)∝(1 + k 2 L 2 ) -4/3 . It is associated with an outer scale of turbulence, L, of 11 cm at 2 m above the surface and a standard deviation of 6 K over 9 s for the temperature. These near-surface atmospheric properties are consistent with a weak to moderate wave scattering regime around noon with little saturation. Overall, this study presents an innovative and promising methodology to probe the near-surface atmospheric turbulence on Mars.
Onset of magma ocean solidification on Mars inferred from Mn-Cr chronometry
The mantle of Mars probably differentiated through the crystallization of a magma ocean during the first tens of million years (Ma) of Solar System evolution. However, the exact timescale of large-scale silicate differentiation of the martian mantle is debated, and in particular, it remains unclear when differentiation commenced. In this paper, we applied the short-lived 53 Mn- 53 Cr system to martian meteorites in order to date the onset of large-scale mantle differentiation on Mars. The new Cr isotope data demonstrate that martian meteorites exhibit no resolvable radiogenic 53 Cr variations, and instead have a uniform +20.2±1.2 (95% conf.) parts-per-million excess in 53 Cr/ 52 Cr relative to the terrestrial mantle. The investigated groups of martian meteorites are lithologically varied and derive from diverse mantle sources that probably had variable Mn/Cr. Hence, the lack of 53 Cr variability among martian meteorites demonstrates that silicate differentiation on Mars occurred after the extinction of 53 Mn. Provided that the sources of the martian meteorites have Mn/Cr variations that are typical of the terrestrial planets, this result implies that the onset of large-scale silicate differentiation must have occurred later than 20±5 Ma after Solar System formation. The onset of silicate differentiation on Mars inferred here is significantly later than time estimates for segregation of the martian core which conservatively occurred within <10 Ma after Solar System formation. Thus, the new Mn-Cr data imply that there was a small, but resolvable, time gap of at least 5 Ma between core formation and magma ocean solidification on Mars. If the age of core segregation is taken at face value, our results imply that the martian magma ocean remained mostly molten over several Ma. This inferred longevity of the magma ocean is inconsistent with thermal models predicting rapid (<1 Ma) solidification of the martian magma ocean. Although there is currently no unique solution to this conundrum, our results can potentially be explained by a protracted history of impact bombardment that delayed differentiation in a shallow magma ocean on Mars, or perhaps more readily, by the presence of an early and dense atmosphere that acted as an insulator and prevented the magma ocean from cooling quickly.
A tale of two planets: Disparate evolutionary models for Mars inferred from radiogenic isotope compositions of Martian meteorites
The radiogenic isotopic compositions of basaltic Martian meteorites (shergottites) and clinopyroxene/olivine cumulate meteorites (nakhlite/chassignites) are used to define the global evolution of Mars. However, the two main groups of meteorites demonstrate that their sources underwent divergent styles of magmatic evolution. The shergottites portray a planet that differentiated ~4.52 billion years ago via solidification of a magma ocean, producing incompatible element-depleted and -enriched reservoirs that remained isolated until melt production. In contrast, the reservoir from which the nakhlite/chassignites derive may have formed earlier, produced melts that fractionated Sm/Nd and Hf/W differently, was compositionally less variable, and experienced a significantly more complex history following primordial differentiation than the shergottite sources. The disparate histories recorded by these two groups of meteorites elucidate important questions that could be addressed by acquiring additional samples. Obtaining samples that shared the isotopic systematics of the shergottites would provide confidence that extrapolating the primordial differentiation history of Mars from shergottite radiogenic isotope systematics is reasonable. Returned samples from Mars will also constrain the physical locations of the meteorite source regions, providing insights into the general structure of the Martian mantle. In addition, they will help constrain the phases present in the martian mantle during melting and the conditions under which they are stable. Finally, identifying an evolved lithology that satisfies the geochemical and isotopic constraints placed on the incompatible element-enriched endmember observed in the shergottites would define the nature of magmatic evolution on Mars and whether it is more akin to processes on the Earth or the Moon.
Microbial ecology of acidic, biogenic gypsum: community structure and distribution of extremophiles on freshly formed and relict sulfate deposits in a hydrogen sulfide-rich cave
Sulfate minerals are abundant on the Martian surface, and many of these evaporite deposits are thought to have precipitated from acidic fluids. On Earth, gypsum (CaSO 4 •2H 2 O) and other sulfates sometimes form under acidic conditions, so exploring the extremophilic life that occurs in these mineral environments can help evaluate the astrobiological potential of acid sulfate depositional settings. Here, we characterized the microbial communities associated with acidic gypsum deposits in a sulfuric acid cave, where sulfate precipitation is driven by sulfide-oxidizing bacteria and archaea. We used 16S rRNA gene sequencing and cell counts to characterize gypsum-associated microorganisms in freshly formed and relict deposits throughout the cave, to test how microbial community composition and abundance would vary with distance from the sulfidic water table and with the concentration of H 2 S(g) and other gases in the cave atmosphere. We found that actively forming gypsum in the lower cave levels was colonized by low-diversity communities that have few cells compared to other environments in the cave. The most abundant taxa were Acidithiobacillus, Metallibacterium, Mycobacteria, and three different Thermoplasmatales-group archaea, which occupied distinct niches based on proximity to sulfidic streams and the concentration of gases in the cave air. By contrast, deposits in older cave levels had more diverse communities that were distinct from those associated with freshly formed gypsum and likely represent a community reliant on different energy resources. These findings show that acidic sulfate deposits serve as habitats for extremophilic microorganisms and broaden our knowledge of the life associated with terrestrial sulfates.