SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
A liquid phase flow-through hierarchical electrode is reported for electrochemical CO 2 reduction where the CO 2 -to-CO Faraday efficiency increases with increasing flow rate and the conversion efficiency reaches a maximum of 25%.
To evaluate dissimilar material interactions in flowing eutectic Pb-16at. %Li between fusion-relevant materials and to establish a maximum operating temperature of future blanket designs, a series of thermal convection loop (TCL) experiments with flowing PbLi have been conducted. Following a 1000-h, 550°C to 650°C TCL experiment, a thin reaction product was observed on the surface of monolithic, high-purity SiC. To identify the source of the observed dissimilar material interaction and to understand the reaction kinetics, an identical 2000-h TCL exposure was conducted, but less reaction of the SiC specimen was observed. Characterization of the FeCrAlMo (alloy APMT) loop tubing and the PbLi-exposed austenitic stainless steel (SS) assembly parts suggested that the formation of the reaction layer on the surface of the PbLi-exposed SiC did not originate from the coated reduced activation ferritic martensitic (RAFM) steel, but from the dissolved loop materials (liquid metal exposed APMT tubing and type 316 SS fittings). Here, the results, after 2000 h, suggest that the dissimilar material reaction between the Al-coated RAFM steel and the SiC has very slow reaction kinetics within a temperature gradient of 550°C to 650°C.
Unitized regenerative fuel cells (URFCs) convert electrical energy to chemical bonds in hydrogen during charge and convert chemical energy to output electricity during discharge, offering a promising solution to long-term energy storage. Recent studies indicate that the round-trip-voltaic efficiency (RTE) and longevity of URFCs are limited by complex mass transport during charging and discharging. Here, we first investigate how different porous transport layer (PTL) structures can impact URFC performance. The preferred PTL has a low tortuosity and high porosity, leading to a high RTE above 50% at 1 A cm −2 using Nafion 212. Moreover, thicker membranes, such as Solvay 90, are required to ensure mechanical stability and minimize H 2 crossover when operating under high differential pressure. Although this assembly inevitably leads to a higher ohmic loss, the RTE can be improved by further tailoring the electrode structures to facilitate mass transport by using supported catalyst, which still achieves over 50% RTEs at 1 A cm −2 . Optimization of porous structure to mitigate mass transport resistance with appropriate materials down selection considering practical application requirements can be a key design principle for achieving high-performing URFCs.
Mitigating the deleterious effects of climate change requires the development and implementation of carbon capture and storage technologies. To expand the monitoring, verification, and reporting (MRV) capabilities of geologic carbon mineralization projects, we developed a thermogravimetric analysis–mass spectrometry (TGA–MS) methodology to enable quantification of <100 ppm calcite (CaCO 3 ) in complex samples. We extended TGA–MS calcite calibration curves to enable a higher measurement resolution and lower limits of quantification for evolved CO 2 from a calcite–corundum mixture. We demonstrated <100 ppm carbonate mineral quantification with TGA–MS for the first time, an outcome applicable across earth, environmental, and materials science fields. We applied this carbonate quantification method to a suite of Columbia River Basalt Group (CRBG) well cuttings recovered in 2009 from Pacific Northwest National Laboratory’s Wallula #1 Well. Our execution of this new combined calcite and calcite–corundum calibration curve TGA–MS method on our CRBG sample suite indicated average carbonate contents of 0.050 wt % in flow interiors (caprocks) and 0.400 wt % in interflow zones (reservoirs) in the upper 1250 m of the Wallula #1 Well. Finally, by advancing our knowledge of continental flood basalt-hosted carbonates in the mafic subsurface and reaching new TGA–MS quantification limits for carbonate minerals, we expand MRV capabilities and support the commercial-scale deployment of carbon mineralization projects in the Pacific Northwest United States and beyond.
Triphenylphosphine (PPh3)-ligated gold clusters offer promising potential applications due to their relative ease of synthesis and usefulness in forming advanced cluster architectures. While previous studies reported cationic PPh3-ligated gold clusters with core sizes of Au1 - Au4, Au6 - Au11, and Au¬13 - Au14, there has not been definitive identification by mass spectrometry of larger clusters in the Au12 - Au25¬ range. Herein, we survey a polydisperse solution of cationic PPh3-ligated gold clusters using high mass-resolution (M/?M = 60,000) electrospray ionization mass spectrometry (ESI-MS). To improve the sensitivity and mass resolution of larger clusters for unambiguous identification, we increased the number of scan averages and reduced the range of mass collection windows to 200 m/z, thereby mitigating potential mass and ion abundance bias resulting from smaller “building block” gold clusters and other solution components present in higher abundance. In addition to the previously reported clusters, we identified several new species including Au5(PPh3)5+, Au12(PPh3)9HCl2+, Au15(PPh3)9Cl2+, Au16(PPh3)10Cl22+, Au17(PPh3)113+, Au18(PPh3)102+, Au19(PPh3)10Cl2+, Au20(PPh3)12H33+, Au21(PPh3)10Cl2+, and Au22(PPh3)10Cl22+, indicating that a full range of clusters between Au1 - Au22 may be observed in a single polydisperse solution. Considering all of the observed clusters, our findings provide evidence that the “magic number” icosahedral Au13 may be the transition point in cluster growth between smaller clusters, exhibiting a 1:1 gold-to-ligand ratio, and larger clusters, wherein subsequent gold atoms are added to the core without an equal number of accompanying ligands. Our method demonstrates that reducing the range of m/z collection windows and increasing the number of scan averages can improve instrument sensitivity for cationic gold clusters and enable a more complete survey of polydisperse solutions, thereby providing new insights to guide and validate the results of other characterization methods and theoretical calculations. This work was supported by the US Department of Energy (DOE), Office of Science, Office of Basic Energy Sciences, Division of Chemical Sciences, Geosciences, and Biosciences. MH acknowledges support from the DOE Science Undergraduate Laboratory Internship (SULI) program. HH acknowledges support from the DOE Office of Workforce Development for Teachers and Scientist (WDTS) under the Visiting Faculty Program (VFP). This work was performed using EMSL, a national scientific user facility sponsored by the DOE's Office of Biological and Environmental Research and located at Pacific Northwest National Laboratory (PNNL). PNNL is a multiprogram national laboratory operated for DOE by Battelle.
Los Alamos National Laboratory (LANL) is working with NorthStar Medical Radioisotopes (NMR) on their efforts to produce Mo-99 from the irradiation of Mo-100 targets. The NMR target consists of an Inconel window that allows the electron beam to penetrate and irradiate a stack of Mo-100 discs. The irradiation process generates large amounts of heat and is cooled using pressurized helium gas flowing at 400 g/s. LANL provides both numerical analysis support and experimental support. Computational fluid dynamics (CFD) simulations for both 300 g/s and 400 g/s are performed on the NMR target to analyze the helium flow through the NMR system. The pressure drop, the mass flow rate through each of the disc and window channels and the force applied on the first disc are some of the quantities estimated using CFD. These results will be combined with Monte Carlo N-Particle (MCNP) estimates of heat flux into the system from the electron beam to perform conjugate heat transfer analysis (CHT). The experiments presented in this report focus on the effect of the flow induced vibrations from helium flowing through the coolant gaps between the discs. There is concern that the flow induced vibrations may lead to excessive mass loss of the enriched Mo-100 discs, and the goal would be to mitigate the mass loss. This work presents benchtop tests of flow through a subset of the target stack which involves high speed imaging and displacement measurements used to estimate disc vibration, as well as mass loss.
Floating offshore wind turbines are a promising technology for addressing energy needs by utilizing wind resources offshore. The current state of the art is based on heavy, expensive platforms to survive the ocean environment. Typical design techniques do not involve optimization because of the computationally expensive time domain solvers used to model motions and loads in the ocean environment. However, this design uses an efficient frequency domain solver with a genetic algorithm to rapidly optimize the design of a novel floating wind turbine concept. The concept utilizes a liquid ballast mass to mitigate motions on a lightweight post-tensioned concrete platform. The simple cruciform-shaped design of the platform made of post-tensioned concrete is less expensive than steel, reducing the raw material and manufacturing cost. The use of ballast water to behave as a tuned mass damper allows a smaller platform to achieve the same motions as a much larger platform, thus reducing the mass and cost. The optimization techniques applied with these design innovations resulted in a design with a levelized cost of energy of USD 0.0753/kWh, roughly half the cost of the current state of the art.
Metal organic chalcogenides (MOCs) are an emerging class of two-dimensional (2D) materials featuring tunable band gaps and strong light-matter interactions with great potential for optical and polaritonic applications. Lead organic chalcogenides (LOCs) stand out among MOCs for sustaining long-lived coherent optical phonons despite their distorted lattices. However, the strong electron–phonon coupling also leads to rapid charge carrier self-trapping, hindering carrier transport. Herein, we demonstrate that charge carrier self-trapping is suppressed in Se- and Te-based LOCs. Specifically, the expansive Se and Te orbitals give rise to more dispersive conduction bands and reduced electron effective masses, thereby mitigating carrier self-trapping. As a result of reduced carrier self-trapping, the Se- and Te-based LOCs exhibit enhanced band-to-band photoluminescence and improved charge transport performance. Furthermore, our results provide a synthetic route to Se- and Te-based LOC single crystals and demonstrate the potential of orbital engineering to tune their electronic and phononic properties.
Various flow regimes exist in a boiling water reactor (BWR) as the steam quality increases in the uprising coolant flow, from bubbly flow, slug/churn flow, to annular flow. The annular flow is characterized by the presence of a fast-moving gas core and the surrounding liquid film flowing on the conduit wall. Additionally, entrained droplets can be observed in the gas core with ingested bubbles in the liquid film. The dynamics occurring on the wavy interface between the liquid film and gas core plays a crucial role in affecting the heat transfer rate and pressure drop within the BWR core. However, a fundamental understanding of annular flow is still lacking, partly due to the difficulty in obtaining detailed local data in annular flow experiments. In the current study, a novel simulation framework is developed for the annular flow by coupling a computational fluid dynamics flow solver with state-of-the-art meshing software. The gas-liquid interface is tracked with the level set method. Based on the computed flow solutions, the computational mesh is dynamically adapted in memory to meet the local mesh resolution requirement. This iterative simulation-adaptation framework can ensure the fine mesh resolution across the interface, which not only helps mitigate the mass conservation degradation known to level set methods but also improves the representation of dramatic interface topological changes such as wave breaking and droplet entrainment. The present investigation will shed light onto the complex interfacial processes involved in annular flow and generate much needed simulation data for annular flow modeling.
Abstract Background Severe energy deficits cause interrelated reductions in testosterone and fat free mass. Testosterone supplementation may mitigate those decrements, but could also reduce circulating concentrations of the orexigenic hormone ghrelin, thereby exacerbating energy deficit by suppressing appetite. Objective To determine whether testosterone supplementation during severe energy deficit influences fasting and postprandial ghrelin concentrations and appetite. Design and methods Secondary analysis of a randomized, double-blind trial that determined the effects of testosterone supplementation on body composition changes during and following severe energy deficit in nonobese, eugonadal men. Phase 1 (PRE-ED): 14-day run-in; phase 2: 28 days, 55% energy deficit with 200 mg testosterone enanthate weekly (TEST; n = 24) or placebo (PLA; n = 26); phase 3: free-living until body mass recovered (end-of-study; EOS). Fasting and postprandial acyl ghrelin and des-acyl ghrelin concentrations and appetite were secondary outcomes measured during the final week of each phase. Results Fasting acyl ghrelin concentrations, and postprandial acyl and des-acyl ghrelin concentrations increased in PLA during energy deficit then returned to PRE-ED values by EOS, but did not change in TEST (phase-by-group, P < 0.05). Correlations between changes in free testosterone and changes in fasting acyl ghrelin concentrations during energy deficit (ρ = -0.42, P = 0.003) and body mass recovery (ρ = -0.38; P = 0.01) were not mediated by changes in body mass or body composition. Transient increases in appetite during energy deficit were not affected by testosterone treatment. Conclusions Testosterone supplementation during short-term, severe energy deficit in healthy men prevents deficit-induced increases in circulating ghrelin without blunting concomitant increases in appetite. Clinical Trials Registration www.clinicaltrials.gov NCT02734238 (registered 12 April 2016).
Not Available
Women preferentially mobilize fat stores compared with men in response to sustained, physically demanding military training, as evidenced by increased lipid metabolites and enhanced fat oxidation, which may be beneficial for mitigating loss of lean mass and lower body power.
We present DEIMoS: Data Extraction for Integrated Multidimensional Spectrometry, a Python application programming interface and command-line tool for high-dimensional mass spectrometry data analysis workflows, offering ease of development and access to efficient algorithmic implementations. Functionality includes feature detection, feature alignment, collision cross section calibration, isotope detection, and MS/MS spectral deconvolution, with the output comprising detected features aligned across study samples and characterized by mass, CCS, tandem mass spectra, and isotopic signature. Notably, DEIMoS operates on N-dimensional data, largely agnostic to acquisition instrumentation: algorithm implementations utilize all dimensions simultaneously to (i) offer greater separation between features, improving detection sensitivity, (ii) increase alignment/feature matching confidence among datasets, and (iii) mitigate convolution artifacts in tandem mass spectra. We demonstrate DEIMoS with LC-IMS-MS/MS data, demonstrating the advantages of a multidimensional approach in each data processing step.
Areas of high chlorinated volatile organic compound (cVOC) contamination at the Savannah River Site (SRS) have been undergoing remediation via soil vapor extraction, sometimes coupled with thermal treatments to enhance extraction rates. These active systems are effective in removing large amounts of contaminant mass from the subsurface and mitigating the impacts to groundwater. However, as extraction rates decline, costs must be evaluated with respect to the benefit of continued active operation. A decision framework for identifying conditions when a transition to a more passive remediation is appropriate has been developed with state and federal regulatory agencies. Two remediation areas have recently been transitioned from active soil vapor extraction (ASVE) to passive soil vapor extraction (PSVE) at the SRS. Performance evaluation goals including plume stabilization, overall mass removal trends, environmental sustainability and costs were considered in transitioning from active remediation to passive technologies at both sites. At the Dynamic Underground Stripping (DUS) project at the M-Area Settling Basin, ASVE was combined with steam injection to extract cVOCs during active operations. Steam injection occurred from September 2005 to September 2009. DUS utilized 63 steam injection wells, 34 active vapor extraction wells, and 3 active soil vapor extraction units (SVEUs). Two active SVEUs had 60 horsepower blowers; the third had a 25-horsepower blower. Mass removal was closely tracked during DUS operations; over 181,437 kilograms (400,000 pounds) of cVOCs were removed while active steam injection occurred. After steaming was stopped, ASVE continued. The 34 active wells were evaluated in 2012. The ASVE wells were grouped into categories of high, medium, and low extraction rates. High producing wells remained connected to a single active SVEU. Low producing wells were abandoned, and the medium producing wells were transitioned to PSVE (Microblowers{sup TM}). Microblowers{sup TM} utilize a dedicated blower per well and are solar powered. This passive technology provides energy, maintenance, and operation costs savings while still providing an efficient reduction in cVOC migration to groundwater. In 2018, the remaining ASVE wells were evaluated again. The purpose of this testing was to identify which wells removed the most mass. An optimal well configuration was determined. The criteria to discontinue ASVE was removal of less than 18 kilograms (40 pounds) per week of cVOCs. After 3 months of shutdown (rebound conditions), 2.7 kilograms (5.9 pounds) of cVOCs per week were being removed. Data from the rebound test justified ending ASVE and transitioning wells with higher extraction rates to PSVE. Wells that had depleted the cVOC mass within their zone of influence were abandoned. Performance data from existing PSVE wells justified ending PSVE at wells with depleted extraction rates. Currently the system has 16 PSVE wells operating. Another ASVE system was being used to treat cVOC contaminated soil at the A-Area Miscellaneous Rubble Pile (AMRP) at SRS. System operation began in 2004, with 7 ASVE wells connected to a 60- horsepower blower. Mass removal rates and contaminant concentrations remained consistently low over the ASVE lifespan at AMRP. This indicated that mass removal was diffusion limited. With this data, the 7 ASVE wells were transitioned to PSVE in 2017. Twelve pressure monitoring points were also transitioned to PSVE wells. AMRP currently has 19 PSVE wells operating. Both transitions from active to passive remediation had concurrence from the United States Environmental Protection Agency and the South Carolina Department of Health and Environmental Control. These transitions ensure that only the necessary amount of energy is being exerted to remediate the environment. (authors)
Rayleigh–Taylor growth during shell deceleration is one of the main limiting factors for target performance in inertial confinement fusion implosions. Here, using analytical scaling laws and hydrodynamic simulations, we show that such amplification can be mitigated by reducing the initial mass density in the central target region. The perturbation growth reduction is caused by a smaller hot-spot convergence ratio during deceleration, increased density scale length, and enhanced ablation stabilization. The required central density reduction can be achieved using the dynamic shell formation concept.
ABSTRACT We present a detailed analysis of numerical discreteness errors in two-species, gravity-only, cosmological simulations using the density power spectrum as a diagnostic probe. In a simple set-up where both species are initialized with the same total matter transfer function, biased growth of power forms on small scales when the solver force resolution is finer than the mean interparticle separation. The artificial bias is more severe when individual density and velocity transfer functions are applied. In particular, significant large-scale offsets in power are measured between simulations with conventional offset grid initial conditions when compared against converged high-resolution results where the force resolution scale is matched to the interparticle separation. These offsets persist even when the cosmology is chosen so that the two particle species have the same mass, indicating that the error is sourced from discreteness in the total matter field as opposed to unequal particle mass. We further investigate two mitigation strategies to address discreteness errors: the frozen potential method and softened interspecies short-range forces. The former evolves particles under the approximately ‘frozen’ total matter potential in linear theory at early times, while the latter filters cross-species gravitational interactions on small scales in low-density regions. By modelling closer to the continuum limit, both mitigation strategies demonstrate considerable reductions in large-scale power spectrum offsets.
We aim to unravel the interplay between bars, star formation (SF), and active galactic nuclei (AGNs) in barred galaxies. To this end, we utilize the SDSS DR12 to select a sample of nearby (0.02 < z < 0.06) disk galaxies that are suitable for bar examination (M r < –20.12 and inclination ≲53°). We identify 3662 barred galaxies and measure the length and axis ratio of each bar. We invent new bar parameters that mitigate the stellar and bulge mass biases and show, for the first time, that the evolution of non-AGN and AGN-hosting barred galaxies should be tracked using different bar parameters: the bar length for non-AGN galaxies and the bar axis ratio for AGN-hosting galaxies. Our analysis confirms that barred galaxies have a higher specific SF rate than unbarred control galaxies. Moreover, we find a positive correlation of bar length with both the SF enhancement and the centrally star-forming galaxy fraction, indicating the interconnectivity of bars and SF through the bar-driven gas inflow. We also find that, while the AGN fraction of barred galaxies is the same as that of the unbarred control sample, galaxies hosting more massive black holes (BHs) have rounder (i.e., higher axis ratio) bars, implying that the bar is not a cause of AGN activity; rather, AGNs appear to regulate bars. Our findings corroborate theoretical predictions that bars in non-AGN galaxies grow in length, and bars in AGN-hosting galaxies become rounder as BHs grow and eventually get destroyed.
Surface-heated membrane distillation (MD) enhances the energy efficiency of desalination by mitigating temperature polarization (TP). However, systematic investigations of larger scale, multistage, surface-heated MD system with high water recovery and heat recycling are limited. Here, we explore the design and performance of a multistage surface-heated vacuum MD (SHVMD) with heat recovery through a comprehensive finite difference model. In this process, the latent heat of condensation is recovered through an internal heat exchanger (HX) using the retentate from one stage as the condensing fluid for the next stage and an external HX using the feed as the condensing fluid. Model results show that surface heating enhances the performance compared to conventional vacuum MD (VMD). Specifically, in a six-stage SHVMD process, 54.44% water recovery and a gained output ratio (GOR) of 3.28 are achieved with a surface heat density of 2000 W m –2 , whereas a similar six-stage VMD process only reaches 18.19% water recovery and a GOR of 2.15. Mass and energy balances suggest that by mitigating TP, surface heating increases the latent heat trapped in vapor. The internal and external HXs capture and reuse the additional heat, which enhances the GOR values. We show for SHVMD that the hybrid internal/external heat recovery design can have GOR value 1.44 times higher than that of systems with only internal or external heat recovery. Furthermore, by only increasing six stages to eight stages, a GOR value as high as 4.35 is achieved. The results further show that surface heating can reduce the energy consumption of MD for brine concentration. As a result, the multistage SHVMD technology exhibits a promising potential for the management of brine from industrial plants.