Open-System Quantum Annealing in Mean-Field Models with Exponential Degeneracy
Explore the source record for details and available documents.
Kostyantyn Kechedzhi↗
SEARCH · Search NASA
Results for “Mean Field Modeling”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
An Energy-Based Hysteresis Model for Magnetostrictive Transducers
This paper addresses the modeling of hysteresis in magnetostrictive transducers. This is considered in the context of control applications which require an accurate characterization of the relation between input currents and strains output by the transducer. This relation typically exhibits significant nonlinearities and hysteresis due to inherent properties of magnetostrictive materials. The characterization considered here is based upon the Jiles-Atherton mean field model for ferromagnetic hysteresis in combination with a quadratic moment rotation model for magnetostriction. As demonstrated through comparison with experimental data, the magnetization model very adequately quantifies both major and minor loops under various operating conditions. The combined model can then be used to accurately characterize output strains at moderate drive levels. The advantages to this model lie in the small number (six) of required parameters and the flexibility it exhibits in a variety of operating conditions.
Calkins, F. T.↗
Rotational effects on convection simulated at different latitudes
We simulate numerically convection inside the solar convection zone under the influence of rotation at different latitudes. The computational domain is a small rectangular box with stress-free upper and lower boundaries, and with periodicity assumed in the lateral directions. We study the transport of angular momentum, which is important for the generation of differential rotation. The sign and the latitudinal dependence of the horizontal Reynolds stress component turn out to be in good agreement with correlation measurements of sunspot proper motions and with predictions from the theory of the Lambda effect. We also investigate the other components of the Reynolds stress as well as the eddy heat flux tensor, both of which are needed in mean field models of differential rotation.
Pulkkinen, Pentti↗
The Applicability of the Generalized Method of Cells for Analyzing Discontinuously Reinforced Composites
The paper begins with a short overview of the recent work done in the field of discontinuous reinforced composites, focusing on the different parameters which influence the material behavior of discontinuous reinforced composites, as well as the various analysis approaches undertaken. Based on this overview it became evident, that in order to investigate the enumerated effects in an efficient and comprehensive manner, an alternative approach to the computationally intensive finite-element based micromechanics approach is required. Therefore, an investigation is conducted to demonstrate the utility of utilizing the generalized method of cells (GMC), a semi-analytical micromechanics-based approach, to simulate the elastic and elastoplastic material behavior of aligned short fiber composites. The results are compared with (1) simulations using other micromechanical based mean field models and finite element (FE) unit cell models found in the literature given elastic material behavior, as well as (2) finite element unit cell and a new semianalytical elastoplastic shear lag model in the inelastic range. GMC is shown to definitely have a window of applicability when simulating discontinuously reinforced composite material behavior.
Pahr, D. H.↗
The Applicability of the Generalized Method of Cells for Analyzing Discontinuously Reinforced Composites
The paper begins with a short overview of the recent work done in the field of discontinuous reinforced composites, focusing on the different parameters which influence the material behavior of discontinuous reinforced composites, as well as the various analysis approaches undertaken. Based on this overview it became evident that in order to investigate the enumerated effects in an efficient and comprehensive manner, an alternative approach to the computationally intensive finite-element based micromechanics approach is required. Therefore, an investigation is conducted to demonstrate the utility of utilizing the generalized method of cells (GMC), a semi-analytical micromechanics-based approach, to simulate the elastic and elastoplastic material behavior of aligned short fiber composites. The results are compared with simulations using other micromechanical based mean field models and finite element (FE) unit cell models found in the literature given elastic material behavior, as well as finite element unit cell and a new semianalytical elastoplastic shear lag model in the inelastic range. GMC is shown to definitely have a window of applicability when simulating discontinuously reinforced composite material behavior.
Pahr, D. H.↗
Building Reliable Forecasts of Solar Activity
Solar ionizing radiation critically depends on the level of the Sun’s magnetic activity. For robust physics-based forecasts, we employ the procedure of data assimilation, which combines theoretical modeling and observational data such that uncertainties in both the model and the observations are taken into account. Currently we are working in two major directions: 1) development of a new long-term forecast procedure on time-scales of the 11-year solar cycle, using a 2-dimensional mean-field dynamo model and synoptic magnetograms; 2) development of 3-dimensional radiative MHD (Magnetohydrodynamic) simulations to investigate the origin and precursors of local manifestations of magnetic activity, such as the formation of magnetic structures and eruptive dynamics.
Kitiashvili, Irina↗
Solution of the three-dimensional compressible, laminar, and turbulent boundary-layer equations with comparisons to experimental data
A technique for solving three-dimensional boundary-layer flows is presented. The governing equations are transformed to obtain a nondimensional form and a similarity-type transform is defined for the normal coordinate and velocity. The resulting equation is solved in an iterative mode using a finite difference technique suggested by Dwyer (1968). A simple mean field turbulence model is discussed and numerical data obtained in a test case are compared with experimental data.-
Harris, J. E.↗
High-Resolution Gravity and Time-Varying Gravity Field Recovery using GRACE and CHAMP
This progress report summarizes the research work conducted under NASA's Solid Earth and Natural Hazards Program 1998 (SENH98) entitled High Resolution Gravity and Time Varying Gravity Field Recovery Using GRACE (Gravity Recovery and Climate Experiment) and CHAMP (Challenging Mini-satellite Package for Geophysical Research and Applications), which included a no-cost extension time period. The investigation has conducted pilot studies to use the simulated GRACE and CHAMP data and other in situ and space geodetic observable, satellite altimeter data, and ocean mass variation data to study the dynamic processes of the Earth which affect climate change. Results from this investigation include: (1) a new method to use the energy approach for expressing gravity mission data as in situ measurements with the possibility to enhance the spatial resolution of the gravity signal; (2) the method was tested using CHAMP and validated with the development of a mean gravity field model using CHAMP data, (3) elaborate simulation to quantify errors of tides and atmosphere and to recover hydrological and oceanic signals using GRACE, results show that there are significant aliasing effect and errors being amplified in the GRACE resonant geopotential and it is not trivial to remove these errors, and (4) quantification of oceanic and ice sheet mass changes in a geophysical constraint study to assess their contributions to global sea level change, while the results improved significant over the use of previous studies using only the SLR (Satellite Laser Ranging)-determined zonal gravity change data, the constraint could be further improved with additional information on mantle rheology, PGR (Post-Glacial Rebound) and ice loading history. A list of relevant presentations and publications is attached, along with a summary of the SENH investigation generated in 2000.
Shum, C. K.↗
Modeling and Prediction of the Noise from Non-Axisymmetric Jets
The new source model was combined with the original sound propagation model developed for rectangular jets to produce a new version of the rectangular jet noise prediction code. This code was validated using a set of rectangular nozzles whose geometries were specified by NASA. Nozzles of aspect ratios two, four and eight were studied at jet exit Mach numbers of 0.5, 0.7 and 0.9, for a total of nine cases. Reynolds-averaged Navier-Stokes solutions for these jets were provided to the contactor for use as input to the code. Quantitative comparisons of the predicted azimuthal and polar directivity of the acoustic spectrum were made with experimental data provided by NASA. The results of these comparisons, along with a documentation of the propagation and source models, were reported in a journal article publication (Ref. 4). The complete set of computer codes and computational modules that make up the prediction scheme, along with a user's guide describing their use and example test cases, was provided to NASA as a deliverable of this task. The use of conformal mapping, along with simplified modeling of the mean flow field, for noise propagation modeling was explored for other nozzle geometries, to support the task milestone of developing methods which are applicable to other geometries and flow conditions of interest to NASA. A model to represent twin round jets using this approach was formulated and implemented. A general approach to solving the equations governing sound propagation in a locally parallel nonaxisymmetric jet was developed and implemented, in aid of the tasks and milestones charged with selecting more exact numerical methods for modeling sound propagation, and developing methods that have application to other nozzle geometries. The method is based on expansion of both the mean-flowdependent coefficients in the governing equation and the Green's function in series of orthogonal functions. The method was coded and tested on two analytically prescribed mean flows which were meant to represent noise reduction concepts being considered by NASA. Testing (Ref. 5) showed that the method was feasible for the types of mean flows of interest in jet noise applications. Subsequently, this method was further developed to allow use of mean flow profiles obtained from a Reynolds-averaged Navier-Stokes (RANS) solution of the flow. Preliminary testing of the generalized code was among the last tasks completed under this contract. The stringent noise-reduction goals of NASA's Fundamental Aeronautics Program suggest that, in addition to potentially complex exhaust nozzle geometries, next generation aircraft will also involve tighter integration of the engine with the airframe. Therefore, noise generated and propagated by jet flows in the vicinity of solid surfaces is expected to be quite significant, and reduced-order noise prediction tools will be needed that can deal with such geometries. One important source of noise is that generated by the interaction of a turbulent jet with the edge of a solid surface (edge noise). Such noise is generated, for example, by the passing of the engine exhaust over a shielding surface, such as a wing. Work under this task supported an effort to develop a RANS-based prediction code for edge noise based on an extension of the classical Rapid Distortion Theory (RDT) to transversely sheared base flows (Refs. 6 and 7). The RDT-based theoretical analysis was applied to the generic problem of a turbulent jet interacting with the trailing edge of a flat plate. A code was written to evaluate the formula derived for the spectrum of the noise produced by this interaction and results were compared with data taken at NASA Glenn for a variety of jet/plate configurations and flow conditions (Ref. 8). A longer-term goal of this task was to work toward the development of a high-fidelity model of sound propagation in spatially developing non-axisymmetric jets using direct numerical methods for solving the relevant equations. Working with NASA Glenn Acoustics Branch personnel, numerical methods and boundary conditions appropriate for use in a high-resolution calculation of the full equations governing sound propagation in a steady base flow were identified. Computer codes were then written (by NASA) and tested (by OAI) for an increasingly complex set of flow conditions to validate the methods. The NASA-supplied codes were ported to the High-End Computing resources of the NASA Advanced Supercomputing facility for testing and validation against analytical (where possible) and independent numerical solutions. The cases which were completed during the course of this contract were solutions of the two-dimensional linearized Euler equations with no mean flow, a uniform mean flow and a nonuniform mean flow representative of a parallel flow jet.
Leib, Stewart J.↗
Comparison of GLAS retrieved cloud fields with model generated rainfall fields
Monthly mean fractional cloud cover for January and February 1979, retrieved from SOP 1 of FGGE, are compared with the total precipitation field derived diagonally from the GLAS analysis/forecast system for the same time period. The breakdown of cloudiness into day (3 AM) and night (3 PM) is consistent with maps of outgoing long wave and short wave radiation inferred from AVHRR data. Of the many regions of coincidence, there is a particularly striking phenomenon: west of the coast of Peru, at about 20 deg S, there is a distinct small scale maximum in precipitation which coincides precisely with a maximum in the cloudiness field. This maximum in cloudiness and precipitation does not appear in the NOAA/NESS fields of albedo and outgoing long wave radiation which are normally sensitive to cloud fields. These low level clouds with warm tops are a mainly nocturnal phenomenon.
Susskind, J.↗
A theoretical model for magnetic field mapping as a means of broken fiber detection in graphite epoxy composites
A technique for location of broken fibers by imaging magnetic fields generated from currents injected in the fibers is presented. It is concluded that the magnetic field pattern drops abruptly near the axis of a hole, or a break in fibers. The magnetic image of a hole gives contours with the shape of an ellipse. By measuring the semimajor and semiminor axis of image it is possible to determine the ratios of the conductivities. These ratios depend on feedthrough at sites where fibers of the different directions of the layup can make electrical contact with other fibers in adjacent layers. The effects of delaminations should alter these values.
Yost, William T.↗
The shape of the F-region irregularities which produce satellite scintillations Evidence for axial asymmetry.
Correlation analysis of three-station observations of satellite amplitude scintillations, recorded at London, Canada during the summer of 1968, have been interpreted to give information on the height, size and shape of the ionospheric irregularities. The irregularities had a mean height of 390 km, and when interpreted in terms of the usual axially-symmetric, field-aligned model, had a mean axial ratio of 6.5, and a mean dimension transverse to the magnetic field of 0.7 km. None of these parameters showed any systematic trend with geomagnetic latitude. The data for one of the passes analyzed were inconsistent with axial symmetry, and when examined in terms of a more general model, 3 of 9 passes showed evidence of irregularities which were elongated both along and transverse to the earth's magnetic field, the elongation transverse to the field tending to lie in a north-south direction.
Moorcroft, D. R.↗
Calculation methods for compressible turbulent boundary layers
Calculation procedures for non-reacting compressible two- and three-dimensional turbulent boundary layers were reviewed. Integral, transformation and correlation methods, as well as finite difference solutions of the complete boundary layer equations summarized. Alternative numerical solution procedures were examined, and both mean field and mean turbulence field closure models were considered. Physics and related calculation problems peculiar to compressible turbulent boundary layers are described. A catalog of available solution procedures of the finite difference, finite element, and method of weighted residuals genre is included. Influence of compressibility, low Reynolds number, wall blowing, and pressure gradient upon mean field closure constants are reported.
Bushnell, D. M.↗
Net Influence of an Internally Generated Guasi-biennial Oscillation on Modelled Stratospheric Climate and Chemistry
A Goddard Earth Observing System Chemistry- Climate Model (GEOSCCM) simulation with strong tropical non-orographic gravity wave drag (GWD) is compared to an otherwise identical simulation with near-zero tropical non-orographic GWD. The GEOSCCM generates a quasibiennial oscillation (QBO) zonal wind signal in response to a tropical peak in GWD that resembles the zonal and climatological mean precipitation field. The modelled QBO has a frequency and amplitude that closely resembles observations. As expected, the modelled QBO improves the simulation of tropical zonal winds and enhances tropical and subtropical stratospheric variability. Also, inclusion of the QBO slows the meridional overturning circulation, resulting in a generally older stratospheric mean age of air. Slowing of the overturning circulation, changes in stratospheric temperature and enhanced subtropical mixing all affect the annual mean distributions of ozone, methane and nitrous oxide. Furthermore, the modelled QBO enhances polar stratospheric variability in winter. Because tropical zonal winds are easterly in the simulation without a QBO, there is a relative increase in tropical zonal winds in the simulation with a QBO. Extratropical differences between the simulations with and without a QBO thus reflect the westerly shift in tropical zonal winds: a relative strengthening of the polar stratospheric jet, polar stratospheric cooling and a weak reduction in Arctic lower stratospheric ozone.
stratosphere↗
Evolution of energy-containing turbulent eddies in the solar wind
Previous theoretical treatments of fluid-scale turbulence in the solar wind have concentrated on describing the state and dynamical evolution of fluctuations in the inertial range, which are characterized by power law energy spectra. In the present paper a model for the evolution of somewhat larger, more energetic magnetohydrodynamic (MHD) fluctuations is developed by analogy with classical hydrodynamic turbulence in the quasi-equilibrium range. The model is constructed by assembling and extending existing phenomenologies of homogeneous MHD turbulence, as well as simple two-length-scale models for transport of MHD turbulence in a weekly inhomogeneous medium. A set of equations is presented for the evolution of the turbulence, including the transport and nonlinear evolution of magnetic and kinetic energy, cross helicity, and their correlation scales. Two versions of the model are derived, depending on whether the fluctuations are distributed isotropically in three dimensions or restricted to the two-dimensional plane perpendicular to the mean magnetic field. This model includes a number of potentially important physical effects that have been neglected in previous discussions of transport of solar wind turbulence.
Matthaeus, William H.↗
Random-anisotropy Blume-Emery-Griffiths model
The results are described of studies of a random-anisotropy Blume-Emery-Griffiths spin-1 Ising model using mean-field theory, transfer-matrix calculations, and position-space renormalization-group calculations. The interplay between the quenched randomness of the anisotropy and the annealed disorder introduced by the spin-1 model leads to a rich phase diagram with a variety of phase transitions and reentrant behavior. The results may be relevant to the study of the phase separation of He-3 - He-4 mixtures in porous media in the vicinity of the superfluid transition.
Maritan, Amos↗
Verification of regional climates of GISS GCM. Part 2: Summer
Verification is made of the synoptic fields, sea-level pressure, precipitation rate, 200mb zonal wind and the surface resultant wind generated by two versions of the Goddard Institute for Space Studies (GISS) climate model. The models differ regarding the horizontal resolution of the computation grids and the specification of the sea-surface temperatures. Maps of the regional distributions of seasonal means of the model fields are shown alongside maps that show the observed distributions. Comparisons of the model results with observations are discussed and also summarized in tables according to geographic region.
Druyan, Leonard M.↗
A unified view of convective transports by stratocumulus clouds, shallow cumulus clouds, and deep convection
A bulk planetary boundary layer (PBL) model was developed with a simple internal vertical structure and a simple second-order closure, designed for use as a PBL parameterization in a large-scale model. The model allows the mean fields to vary with height within the PBL, and so must address the vertical profiles of the turbulent fluxes, going beyond the usual mixed-layer assumption that the fluxes of conservative variables are linear with height. This is accomplished using the same convective mass flux approach that has also been used in cumulus parameterizations. The purpose is to show that such a mass flux model can include, in a single framework, the compensating subsidence concept, downgradient mixing, and well-mixed layers.
Randall, David A.↗